Get P/N and S/N from All Switches in Company's Internal Network

Hi~
Anyone can help in providing a solution for getting P/N and S/N from all switches? All branches in our company are connected with MPLS network, most of our switches are C2900 series or C3750...
Now I am anxious of getting those information from hundreds of devices, it would be better and more intelligent to do that in an easy way... Please advise! Thanks!
Regards

Anyone can help in providing a solution for getting P/N and S/N from all switches?
If you know all the IP addresses of your switches, then you can use SNMP.

Similar Messages

How do you get your tunes and voice recordings from your iPod Touch into iTunes on a new computer if you don't have Mobile Me?

How do you get your tunes and voice recordings from your iPod Touch into iTunes on a new computer if you don't have Mobile Me?
iTunes on tmy new computer shows none of my data and I fear if I sync my iPod with the computer all will be deleted on the iPod.
I still have everything in iTunes on the old computer.

Just move your iTunes library to you new computer. You can transfer iTunes purchases to you new computer from your iPod by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT1848Make sure you also move the backup. You an find where the the backup is located here:
iPhone and iPod touch: About backups
You can move other items by:
Best iPod to PC
After you move you stuff to the new computer, restore the iPod from backup.

How to get Storage unit and Warehouse number from Handling Unit.

hello all,
I have Handling unit and Material in my program as an input, using these two fields i have to get corresponding storage unit and ware house number, to pick up transfer order.
Can anybody explain me who can we get Storage Unit and Warehouse Number from Handling Unit.
I know we can pull transfer order from table LTAK & LTAP using warehouse number.
But i dont understand how to get warehouse number from handling unit.
There is table LSUTO which has warehouse and Handling unit relation, but in our system there is not data maintained in that table. So, i was just wondering how can i get warehouse number from the given handling unit number.
please guide me
thanks
Edited by: Mr A on May 12, 2008 1:23 AM

Hi ,
Check out the handling unit item table VEPO. You got storage location(LGORT) in it.
Reward points if it was useful.
Regards,
Abhishek

How do I use Migration Assistant to get my Mail and Keychain settings from

How do I use Migration Assistant to get my Mail and Keychain settings from my Power Mac G5 2.3Ghz? I just purchased a new 2.5 MacBook Pro which will be delivered tomorrow, and I want to to know how to transfer Mail and Keychain?
Thank You in advance for your reading and replying.
Kindest Regards,
Sebastian

Rather than using Migration Assistant, which can cause trouble with the PPC to Intel change, simply boot the G5 in FireWire target disk mode and manually transfer the following:
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist
You might want to look over Kappy's helpful guide for migrating, which covers the full process for a manual migration (including the above files).
Hope this helps...

To get line item and confirmation details from CRM_ORDER_READ

Hi,
Please can anybody let me know which the field from which i can get line item details and material for the service order given?
I am using CRM_ORDER_READ to retrieve the values. In that i am exporting 4 fields - et_orderadm_h, et_orderadm_i, et_product_i, et_doc_flow. So from where to get line items and material id from these fields?
I will be very thankful if i get the answer of this question.

Hi,
The attribute NUMBER_INT of ET_ORDERADM_I contains the Item Number.
Hope this helps!
Regards,
Rohit

How can I completely get my iPhone and iPad disconnected from iTunes Match? I don't usually have Cloud access and find iTunes Match to be very annoying.

How can I completely get my iPhone and iPad disconnected from iTunes Match? I don't usually have Cloud access and find iTunes Match to be very annoying.

Csoud1 is correct. But if you still want to keep your iTunes Match subscribed and did not want to sync with your iOS devices, do the following:
On you iOS devices, just go to Setting > Music > disable iTunes Match

Clicks and visual interference from all footage from xf 300 mxf files

I'm having problems with clicks and visual interference from all footage from xf 300 mxf files in CC have formatted cf cards on camera as this has happened before and had camera checked with no problems has anyone else had this problem as cannot find anything anywhere. The cards are Sandisk Extreme 32GB and the manufactures say its not their card??

Kevin, thanks for your prompt response.
I've finally had the time to try this again and understand it.
I wasn't using the media browser. I was using the import function from the Project panel, which is how I have always loaded clips. I had never used the media browser and assumed that one ended up using it anyway no matter which front end used for import. i.e. I thought the media browser was simply the back end file selector dialogue.
So I see that (only) the media browser will import spanned clips as one unified clip into the sequence, which is an improvement for sure. I do think that import of the Project panel should work the same way.
I initially had a problem though, as my top level directory above the numbers clip dirs was not CONTENTS. It had to be renamed to avoid conflict with other CONTENTS clip set in the same project. So the media browser refused to load the spanned clips together, but would allow me to load a single clip. It wasn't until I guessed, and renamed my top dir back to CONTENTS that things worked and the the View as dropdown showed the magic Canon XF option.
I suggest this implied requirement be made clear in the manual, noting that the top dir must be named CONTENTS for this to work. Yes, I believe that's the MXF standard, but many people will rename their parent directory so multiple cards can be copied into the same project directory, instead of having yet another single-entry directory above the CONTENTS directory, like CARD1 CARD2 etc.
I beieve that the software is at fault and should be changed - if it can see mutliple numbered MXF dirs at the same level, it should simply deal with them. I know you can't fix that, but please warn people.
Anyway, thanks again for your reply. It got me on the correct path to a solution.
Brett

How do I select multiple files under "Get File Info"and lock or unlock all?

How do I select multiple files under "Get File Info"and lock or unlock them all? It seems to do it automatically when I have 10 or more selected. But how do I lock or unlock 5 or 6 files in one swoop? Thanks

Select the desired files then press OPTION and select Show Inspector from the Finder's File menu.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

How to I get my photos and apps back from iCloud?

Yesterday I had to get a replacement iPhone 4S. I didn't have time to wait for my photos and apps to restore from iCloud and I want to do it now. Everything is saying "waiting" but there are no status bars on anything and after 1 hour, nothing has restored.

If you no longer have the phone or have any Backup of it at all, you can re-download your apps and your content from the iTunes Store by logging into your Apple ID at settings> iTunes & App Store. Unfortunately you can no longer recover the data that was associated with those apps.
So far as your photos go, you can recover any photos that were in photo stream and taken less than 30 days ago by logging in with your Apple ID to settings> iCloud> photos. Unfortunately you will be unable to recover any photos from your camera roll.

Getting the lowest and highest dates from a column

<Praise>Numbers is absolutely incredible. Kudos to the Apple team. From the first time I've used it, it has enabled this average spreadsheet user to create awe-inspiring layouts from average data. I'm extremely excited to see where Apple brings </Praise>
What I am trying to do though is this. I have a column with dates in it. I'm trying to get the lowest and highest dates in that column for a report. For instance, "Date range between 7/1/2007 and 9/11/2007".
Any help would be very much appreciated

Let me also pose this. I've been asked to create a two date ranges for this from the same data. This report will need to be updated every two months. Is there a way to specify the spreadsheet to select only rows with a date between X and Y for processing?
Or, more likely, is there a way to access a cell name by reference from another field? Such that I have a "Current From", "Current To", "Historic From", and "Historic To" column. The value of these fields could be references to a row number that has the beginning and ending date, so that it selects all of the rows in between.
So I would have something like SUM(SourceSheet :: SourceTable :: A{CurrentTable :: A2} : SourceSheet :: SourceTable :: A{CurrentTable :: A3}) where CurrentTable A2 and A3 are "2" and "6" for rows A2:A6. Is this even possible? Hopefully I'm overcomplicating it and there's a magical function out there that I've missed.

Get jms queue and topic names from JNDI

Hello all,
How do I get all possible queue and Topic names from JNDI (in my app) so I can store them in a HashMap?
Thanks

I'm guessing you know where in the JNDI you put your queue and topic names. Then you can do:
context.listBindings("myJNDIContext");
and go through the NamingEnumeration that this returns.

Why there is no customization option available in India in IMAC? Why only corporate sales get the customization and that too from Hongkong means a waiting period of 5-8 weeks :(

I wanted to have iMac with finest customization but in India it is not available. Just the corporate sales get the priveledge of customization and that too from HongKong with a waiting period of 5-8 weeks Why?
Even Indians like me deserve the best and I seriously request you guys should allow us to go for customization options as well! Like why to stick with i5 when you are having i7 :|

You need to ask Apple these questions. You're not talking to Apple here only other users.

What happened to the Get/Set Date and Time utilities from RT 7.1?

I'd like to use the Get/Set Date and Time utilities that were available in 7.1, but disappeared after that. I see that the 7.1 utilites call a dll that does not appear to be installed with LabVIEW RT 8 and later. What do I need to do to use the utilites from 7.1 that do not appear in later versions?

In Labview 8.2 and later there are two directories for vi.lib. settime.dll is located in National instruments\Labview 8.2\Targets\NI\RT\ vi.lib
This is the dll you want to use in order to call it use the same Vi as in 7.1 (RT set date and time.vi) and link it to the correct dll.

How to get the user and groups information from http header

Hi All,
In my current scneario, we are using Siteminder for SSO setup.. And in this process, after authentication and authorization, they are going to append the user information and group information of the user into a HTTP header and it will be sent back to our presentation services.. We have to extract the user information and group information from the http header.
My HTTP header will look like as follows..
SM_USER XYZ
SM_USERDN CN=Firstname\, Lastname\, xyz, OU=GPO-Low Level Security,OU=Domain Users,OU=BU FDT,
SM_USERGROUPS CN=GG-CA-SiteminderAdmins, OU=Global,OU=Domain Groups, DC=com^CN=GG-ServiceDeskAdmin-TCCORPCEFS
And also if anyone explain me the overall working of SSO in detail like how presentation services will make a connection to BI server( I guess using Impersonator User), and also how our BI server will read the URL from presentation services and the over all working flow in our OBIEE..
Thanks a lot....

Please use the search! this topic has come up lots of times already.

Getting host name and port number from application

Does anyone know how I would be able to get the host name
and port number from an application launched by java webstart ?
This is the host and port of the URL that this application is launched from.

A couple of suggestions:
-The note is about 6.40. Doesn't fit for your server
-Don't!
-Reinstall!
Regards,
Benny

Get P/N and S/N from All Switches in Company's Internal Network

Similar Messages

Maybe you are looking for