Get parameters for rfc sender communication channel

Hello everybody,
does anybody know how to establish the values for the cc-parameters?
For example:
Where do I receive information about:
- the Application Server (Gateway) = Gateway host name of the sender system
- the Application Server Service (Gateway)
- the Program ID
etc.
Regards Mario

hi,
did you have a look at my weblog?
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
>>>- the Application Server (Gateway) = Gateway host name of the sender system
fomr SAPlogon
>>>>- the Application Server Service (Gateway)
SAPGW + system number from SAPlogon
>>>>- the Program ID
any name
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Similar Messages

Files not getting picked up using Sender Communication Channel frm MDM sy

Hi Experts,
XI sender communication channel is configured to pick up any files coming from MDM system from the following path
/XXX/XXX/mdm/mds/XXX/XXX/Material_Master/Outbound/P33/P33_R3_PORT/Ready
Earlier we had the scenario working properly that created idocs in R3 system.(MDM>XI>R3)
Currently i tried to test the scenario again but i don't see an entry in the sxmb_moni or tried checking whether the sender communication channel is working properly it showed polling correctly in RWB.The files are already sitting in the the above path.XI should be picking it up but don't know what the problem is?
I also tried a test in RWB>Integration Engine>Test Message put the payload and it was able to create idocs in R3.So i concluded there is an error in picking up message from MDM.
Is there any log available for the commmunication channel where i can see error info of whether any files picked up or not.
Please suggest me what all can be done to to ensure the CC is picking up the files.
Earlier responses highly appreciated.
B'Rgds,
Sudhansu

Hi,
In addition to the RWB channel check suggested by Aamir, you should also check if the channel is
1) Active in ID
2) Channel is not locked in VA, if it is locked then your status in RWB will show processing started but the files wont be picked up...for more details check the unlocking procedure mentioned in this thread:
JDBC Sender Adapter - NOT FETCHING RECORDS -PROCESSING STARTED
The unlocking procedure is the same for FILE and JDBC....
Regards,
Abhishek.

RFC sender communication channel

Hi,
I am working on RFC->XI->SOAP scenario. In R/3, I maintainted an RFC destination with program id same as RFC sender CC in XI, Gateway and host of XI server. But when i test connection the RFC destination, I am getting the following error.
/CPIC-CALL: ThSAPOCMINIT'Transaction program not registered'
Error details: program 'testid' not registered.
What could be the reason and pls let me know if there are any thing else need to be checked or configured. Any blogs or example links are an additional help.
Thanks
Ricky

1) In sap gateway (smgw) of R/3 sender, what should LU Name and TP Name contain? I am right now only seeing R3 host and gateway service respectively for both the columns. Is this correct?
>>>LU name is R/3 Host name. To get the gateway service , go to SMGW>Menu in there GOTO->Parameters-->Display..
Generally it is sapgwXX where XX means System no.
2) The Gateway host of RFC destination in R/3 sender should be what? Is it the business system name in XI for the sender R/3?
>>>It should be Application Server details of the Application System i.e R/3 system. U can get this from the SAP logon pad and application host name. It is not XI server.
Hope this helps,
regards,
Moorthy

RFC Sender Communication Channel is not Working Properly

Hi All,
I had a Small Problem.
I had configured RFC Sender in Asyn mode as given in Weblog 5398
The Scenario is working fine for 1 time, after the execution the Communication Channel should be made Active again to make it work for the next time.
For every time to Execute the Scenario i had to Activate the RFC CC.
It is some complicated one. So any one please suggest me what can be done to Resolve the issue.
Thanks in Advance.
Sriram

Hi Bhavesh,
when we test RFC connection it is Failing and giving this error
Error Details     ERROR: timeout during allocate of registered program
Error Details     LOCATION: SAP-Gateway on host p162845 / sapgw00
Error Details     DETAIL: TP Flightdatasender init/busy for more than 60 sec
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 31415
If I Activate the RFC sender CC.It is working again.
After 1 Execution.It is throwing this error.
I even added Name as 'jco.server.max_startup_delay' and Value '1000' in advanced Mode of RFC sender CC.
Please suggest me.
Thanks in Advance.
Sriram

Regarding RFC Sender Communication Channel

Hi All,
I am working on RFC sender channel, need some important information.
1). Can i use single RFC Sender Channel in Multiple Sender Agreements.
2). Can i use Program ID in Multiple Sender RFC Channels. I am having one RFC to File interface and another RFC to JDBC interface.
Do i need to create 2 sender channels and 2 RFC destinations with 2 Program Ids????.
Please give me clarifications.
Regards,
Balu

If i will use single sender RFC channel and Single Program ID for my all sender agreements, how that Single RFC channel
will identify the information like
In our sender agreement we configure not only the channel but also the Sender Interface (in your case RFC)......this is the factor which defines what to accept......in broader term we use the same concept of channel re-use in other cases also and the same work fine because of this Sender Interface.
I found Q28 interesting: https://service.sap.com/sap/support/notes/730870
In first read it may sound confusing...but after some more rreads you will know what the answer means in the SAP note.
Regards,
Abhishek.

Feilds require in RFC sender Communication Channel

My scenario is RFC to webservice
The scenario is in X13 server(system No.01)and RFC is in X32(system no:00)
For proceeding in this scenario i require following parameter
Please do help me with this same:
1) application server(gateway)
2)application server service(gateway)
RFC Metadata repository parameter
3)Application server;

Hi,
Go to SMGW Transaction in Application System (R/3)
Goto GO to--Parameters-Display
You will find out Gatewya & Gate way service
Reward Points if helpful
Regards
Sesh

Why is a sender communication channel not required for IDOC and PROXY ?

Hello,
In case of IDOCs, metadata will be available in PI for the IDOCs used both at inbound and outbound.
Why is a sender communication channel is not required in case of IDOC and PROXY outbound scenarios (i.e. IDOC to File or PROXY to file ..) when a receiver channel is required for scenarios like file to IDOC or file to PROXY.
Though this might be a regular question, I am not able to find a proper reason.
Please let me know the reason for the above request.
Thanks & Regards.

You will create RFC destination in ECC , it will have details about PI system details, when ever you send IDoc, ECC will use Port and RFC destination to connect PI Integratiion engine to deliver data to PI.
But when receiver side you will create RFC destination in PI with ECC details, but to call RFC destination and Port we need medium that was the reason we create IDoc communication channel.
Even the same case for Proxy also, but HTTP deastination establish the conection between ECC and PI, but receiver side you have to create XI channel with PI integratioin engine adress to post data.
Regards,
Raj

Sender Communication Channel for Integration Scenario IDoc - XI - IDoc?

Hello All,
One general question. I have to configure an IDoc - XI - IDoc Scenario. For this Scenario I have to configure an Receiver Communication Channel (IDoc Adapter) to the Backend System but what about Sending Communication Channel for the Sending R/3 system.
Is the (IDoc) Communication Channel from Sending system to XI required to configured?
Many thanks in advanced!
Jochen

Hi Jochen,
for sending IDOCs from SAP to XI, sender IDOC adapter is not required. when XI will send the IDOC to a SAP system, then receiver IDOC adapter is needed.
Thanks,
Rajeev Gupta

BIC Module Error in Sender Communication channel for EDI to File scenario.

Hi Experts,
We are working on the EDI based scenarion where EDI files come to SAP PI from partner and then through Split 997 Adapter Func Ack is sent back to the Partner . But we are facing a issue in our sender Communication Channel which is a File Adapter Channel and uses BIC Module for the conversion of EDI to XML .Request if any one can provide any guidance on the below issue coming in sender CC.
Error: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: EdiSegmentData read(): Edifact Format not correct : segment must end with \"segment delimiter\" (Segment : ISA). DESCRIPTION: EdiSegmentData Error: Your Edifact Format is incorrect the segment must end with \"segment delimiter\". check segment [not specified]. Last error: InhouseDocReader moveNext(): com.seeburger.jucon.dochandler.AnsiX12DocReader, offset[92(read Segment : ISA)]: could not parse segment (wrong format): EdiSegmentData: Edifact Format not correct : segment must end with "segment delimiter" (Segment : ISA) DESCRIPTION: InhouseDocReader Error: [not specified] at position [not specified] could not parse the segment [not specified] Error while reading description - wrong format.
Thanks & Regards,
Abhishek

Hi Abhishek,
Is there any special character present in the EDI file?
the parser is not able to parse the data.
you can check the BIC conversion log for more information.
Regards,
Harish

Sender communication channel for HTTP and IDOC

Why the sender communication channel is not necessary for HTTP and IDOC

Hi,
Because they lie on ABAP stack ie on Integration Engine...so that they can process directly but other adapter lies on Adapter engine.
Regards
Hemant

FILE SENDER COMMUNICATION CHANNEL DOESN'T GET FILE

Hi,
I have create a new sender communication channel with ftp file configuration. Server parameter and source directory are correct.
I have also checked file and directory permission (chmod 777)
Poll interval is 600 secs.
There is no error in communication channel monitor (returned log: CC is correctly configured and started).
Process started every poll interval, but no file is picked up.
Why?
Carme

Hi,
What type of file are you processing. Check whether the file type is binary or text mode.
Also check whether the file name you have specified in the CC and the exact file in the directory are the same.
Also check the file processing mode, whether it is read only, delete or in test mode.
If the file is in read only mode when the file first processed, then once the file was processed it would be in read only mode, so if you place the new file it should process, so try deleting the existing file in the directory and place a new file with exact file name along with the correct extension and try to process it.
Also I would suggest you check the exact file extension, by unchecking the radio button in the folder option under the menu tools> Folder options> view-->hide extension for file type.
Regards,
Nithiyanandam

Intermittent problems with a RFC receiver communication channel.

Hello.
I want to know how to get the total channel history for a RFC receiver communication channel (in RWB only last 5 calls are available).
We use this communication channel in a java mapping to run a RFC of the abap engine of XI. Sometimes the rfc doesn't work and mapping throws a mapping transformation exception. Then, without a modification, we reprocess the message in SXMB_MONI and it is processed without errors. We think that it could be caused by a huge message volume.
How can I get the maximum number of rfc calls that the rfc communication channel can admit simultaneously. Which parameters have influence in these calls?
Thank you very much.
Alberto.

1. Increase the maximum connections
from help.sap.com
Additional Parameters
Parameter ~~~~ Entry
Maximum Connections ~~ Maximum possible number of initial connections required between adapter and sender system. This value is limited internally to a maximum of 50.
2. /people/community.user/blog/2006/09/21/xi-rfcadapter-reconnect-issue

Error in sender communication channel

Hi,
I am doing File to RFC scenario in which i am using Standard bapi to get the cost from the sap system
while sending the data in sender communication channel the processing mode is in delete mode but it is not deleting and throwing the error
Error: com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
this error is from sender communciation channel..
can any one give some inputs for this...
regards,
Kishore

K.P.N.,
i have checked it getting the same error. in moni also administrative cache clear error is coming
do we need to do any workaround...
regards
Kishore

Adapter Module not working in Sender Communication Channel working in recie

Hi
I have written one adapter module. IF i give that Adapter Module in Sender Communication channel its not working. If i give that in Reciever Communication Channel its working. If i mention in both the channels then its working in sender communication channel also.But in only sender communication channel its not working in only reciever communication channel its working Can any one tell me why its happening
Thanks & Regards
Ravi Shankar B
Message was edited by:
        RaviShankar B
Message was edited by:
        RaviShankar B
Message was edited by:
        RaviShankar B

hi
if its problem with my code why its working if i give the adapter module in both the communication channels?If i give in only sender communication channel the module is not invoking. its not showing any auditlogs.Can any one please help me
OUTBOUND is for sender
INBOUND is for reciever right.?
the following code i have written
public ModuleData process(
          ModuleContext moduleContext,
          ModuleData inputModuleData)
          throws ModuleException {
          String SIGNATURE =
               "process(ModuleContext moduleContext, ModuleData inputModuleData)";
          Object obj = null;
          Message msg = null;
          String filename = null;
          AuditMessageKey amk = null;
          try {
               obj = inputModuleData.getPrincipalData();
               msg = (Message) obj;
               System.out.println("&&&&&&&&&&&&&&&&&" + msg);
               if (msg.getMessageDirection().equals(MessageDirection.OUTBOUND)){
                    amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.OUTBOUND);
                    Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> etHostName: Module called"+ i++);
               }else{
                    File filename1 = new File("
10.7.1.43
XI
source","text.txt");
                    filename1.createNewFile();
                    amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.INBOUND);
                    Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> etHostName: Module called"+ i++);
               System.out.println("**************" + amk + "***********");
          } catch (Exception e) {
               Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> GetHostName: Error Module called");
               e.printStackTrace(System.err);
               ModuleException me = new ModuleException(e);
               throw me;
          // Read the channel ID, channel and the module configuration
          try {
               Hashtable mp = (Hashtable)inputModuleData.getSupplementalData("module.parameters");
               if(mp != null){
                    filename = (String)mp.get("FileName");
                    Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,"Host >>> Element Name is set to {0}"+filename );
               }else{
                    Audit.addAuditLogEntry(amk,AuditLogStatus.WARNING,"HostElementName parameter is not set. Default used: HostName.");
                    filename = "FileName";
          } catch (Exception e) {
               e.printStackTrace(System.err);
               Audit.addAuditLogEntry(amk,AuditLogStatus.ERROR,"Cannot read the module context and configuration data");
               ModuleException me = new ModuleException(e);
               throw me;
          try {
               XMLPayload xmlpayload = msg.getDocument();
               DocumentBuilderFactory factory;
               factory = DocumentBuilderFactory.newInstance();
               DocumentBuilder builder = factory.newDocumentBuilder();
               Document document =
                    builder.parse((InputStream) xmlpayload.getInputStream());
               Element rootNode = document.getDocumentElement();
               if (rootNode != null) {
                    Element childElement = document.createElement("filename");
                    childElement.appendChild(document.createTextNode(filename));
                    rootNode.appendChild(childElement);
               // Transforming the DOM object to Stream object.
               TransformerFactory tfactory = TransformerFactory.newInstance();
               Transformer transformer = tfactory.newTransformer();
               Source src = new DOMSource(document);
               ByteArrayOutputStream myBytes = new ByteArrayOutputStream();
               Result dest = new StreamResult(myBytes);
               transformer.transform(src, dest);
               byte[] docContent = myBytes.toByteArray();
               if (docContent != null) {
                    xmlpayload.setContent(docContent);
                    inputModuleData.setPrincipalData(msg);
          } catch (Exception e) {
               e.printStackTrace(System.err);
               Audit.addAuditLogEntry(amk,AuditLogStatus.ERROR,"Cannot read the module context and configuration data");
               ModuleException me = new ModuleException(e);
               throw me;
          return inputModuleData;
Best Regards
Ravi Shankar B
Message was edited by:
        RaviShankar B
Message was edited by:
        RaviShankar B

Sender Communication Channel Monitoring Error

Hi....Experts,
i am doing rfc-soap scenario synchronous . this is B2B scenario, under party i created business services, under this created 2 communication channels. in RWB, Communication Channel monitoring i am getting this error at sender side..
Error in processing caused by: com.sap.aii.af.rfc.afcommunication.RfcAFWException: only partyless services are supported but party : xxxxx is set for service sender business service name and sender CC name..
pls suggest me how can i rectify these errors..
for helpful answers i will give points*********
regards,
Pasi.
Edited by: pasi s on May 5, 2008 8:35 AM
Edited by: pasi s on May 5, 2008 8:40 AM

Hi Pasi,
Check if you are using the same business service (under which u have created the Channels) at sender side in configuration.
You have to use the same business serivce for sender under which your communication channels are created...................
Or
Create a sender communication channel in the service that u have used at sender side.............
So i think in your case there is a mismatch of using the diff sender service at diff stages.............
Hope this will solve your problem
Thanks
Sai
PS: kindly reward points if helpful

Get parameters for rfc sender communication channel

Similar Messages

Maybe you are looking for