Get pernr late

hello friends.
please anybody tell me in what conditions can we use get pernr late event. can we give get pernr late after end-of-selection. pls explain with an example.
thanks

hi
good
The GET PERNER is exclusively used in HR ABAP. The GET event gets the node.
The text below will explain the GET event better.
This statement defines an event block whose result is triggered by the ABAP runtime environment after submitting an executable program, if the logical database to which the program is linked, provides data in the work area node. The node work area must be declared with the NODES statement (or TABLES). The data can be processed in the event block.
GET node also controls the behavior of the logical database.
And GET node Late
GET node LATE [FIELDS f1 f2 ...].
Effect
This statement defines an event block whose result is triggered by the ABAP runtime environment after submitting an executable program, when the logical database has read in all records of node node. For node and FIELDS, the same applies as for the previous variant. Use this event block for final processing actions concerning the hierarchy level of the node.
We generally use the same when we write the PAYROLL as to get the entire payroll structure from the database.
reward point if helpful.
thanks
mrutyun^

Similar Messages

Difference between GET pernr LATE and GET pernr LAST?

Hi all,
does anyone know the difference between GET PERNR LATE and GET PERNR LAST?
Regards
Mart

hi,
Please refer to this link:
[http://help.sap.com/saphelp_nw70/helpdata/en/9f/db9abd35c111d1829f0000e829fbfe/frameset.htm]
Hope this will Help.
reward if useful.
Sumit Agarwal

Get pernr based on company code in logical databse

Hi,
    When using the get pernr event, all the pernrs that I get are in the ascending order I want them first grouped based on the company code and then on pernr.
Any suggestions would be appreciated abd suitably rewarded.
for ex: get pernr.
           write:/ pernr, bukrs.
         end-of-selection.
result:   00000099 1001
          00000002 1003
Regards
Vick
Message was edited by:
        vick vennav

for ex: get pernr.
write:/ pernr, bukrs.
end-of-selection.
result: 00000099 1001
00000002 1003
We are sending the payroll information to the 3rd party for pay check purposes, at my client side they have inserted a custom include in the standard program and populating the information in a flat file which needs to be sorted first based on company code and then on pernr. If I try to do it later,the code is becoming a mess, so I want to know is there a way to get pernr using logical database whose order is based on company code.
Regards

Get latepernr and get pernr

Hi all,
can u explain the get event functionality ?
Can u tell me the difference between
get pernr and get late pernr.
when should i use these type of statements ?
Regards
charan

Hi Ravi,
GET PERNR event initiates the data extraction for a pernr.
GTE PERNR LATE event is triggered after all the other events are triggered and right before the end-of-selection.
PL take a look at the following <a href="http://help.sap.com/saphelp_47x200/helpdata/en/ac/764da4496f11d3967200a0c9306433/frameset.htm">SAP Help</a> where it is explained very clearly.
Regards,
Suresh Datti

How to get PERNR from employee search(teamviewer) iView in to a WD-4-ABAP.

Hello All,
I had developed a new Web Dynpro for ABAP (WD4A) component for updating a custom Infotype. This application is meant for the manager to maintain some specific data through portal for his employees in the team.
WD4A application is built based on the employee number it receives from the portal.
     How could I get PERNR from employee search(teamviewer) iView in to my WD4A component?
In portal I had developed a test page by copying the standard page from MSS com.sap.pct.erp.mss.general_information, and added my WD4A application through an iView into this page.
Then I hided all the other iVews in the page except (1) employee search and (2)my WD4A iVew. On the preview everything appears fine.
During the preview of this page it triggers the WDDOINIT of WD4A component main view and then the WDDOMODIFYVIEW. When I select an employee from the employee search, then it triggers only WDDOMODIFYVIEW in the WD4A application and not the WDDOINIT anymore.
In my WDDOMODIFYVIEW I had inserted the following code:
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_portal_manager TYPE REF TO if_wd_portal_integration.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_portal_manager = lo_api_component->get_portal_manager( ).
DATA lo_api_controller TYPE REF TO if_wd_view_controller.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_portal_manager->subscribe_event
    EXPORTING
      portal_event_namespace = 'urn:com.sap.mss.employeesearch'
      portal_event_name      = 'selection_changed'
      view                   = lo_api_controller
      action                 = 'GET_SELECTED_PERNR'.
And in the action: 'GET_SELECTED_PERNR'
METHOD onactionget_selected_pernr .
DATA lv_str_pernr TYPE string.
DATA lv_strlen TYPE i.
DATA lv_pernr TYPE pernr_d.
DATA lv_offset TYPE i.
wdevent->get_string(
EXPORTING
name = 'PORTAL_EVENT_PARAMETER'
RECEIVING
value = lv_str_pernr ).
lv_strlen = STRLEN( lv_str_pernr ).
lv_offset = lv_strlen - 8.
lv_pernr = lv_str_pernr+lv_offset(8).
ENDMETHOD.
This is not functioning form me. The action is not getting trigged with the code in WDDOMODIFYVIEW.
I had gone through several threads in u2018SDN say:
     Pass pernr to WebDynro
     MSS - General Information - Related Activities Links persnr.
     SAP Note: 1112733.
Most of the threads are answered but incomplete. In some threads people shared document personally which had been helpful.
I am stuck with this scenario of handling the employee number from employee search iView. Helpful suggestions will be rewarded for sure.
Thanks in advance.

Do i understand you correctly that you are not getting the portal event ?
This can be several reasons ?
Both portal system and WDA server has to be in same domain and same proptocol to communicate with Portal event.
Please check in that direction and search posts on this topic.

Is there a way to use 'GET PERNR' without the selection screens?

I would like to use the GET PERNR event in a batch program without using the default selection screens. I would like to be able to use my own selection screen and parameters, but only get them along with the default selection options for payroll period. I've tried removing the screen number from the attributes screen, but still get these options. Is this possible?

hi Kiran,
report Category is a Pushbutton on the Attributes popup, it only appears if you use PNP logical DB.
this is from SAPHelp: "Report Category
Category used for HR reports that use the PNP logical database. It controls the type and number of fields that appear on the selection screen of an evaluation report."
hope this helps
ec

How to use the class CL_PT_EMPLOYEE with GET PERNR?

Hi,
I saw this sample code on the forum.
Is it more performant than using the "RP-PROVIDE-..." macros?
Does the employee instance needs to be killed after each pass? How does it affects memory?
start-of-selection.
GET pernr.
<b>* Create employee instance</b>
gif_employee = cl_pt_employee=>get_employee( pernr ).
go_employee ?= gif_employee.
<b>* Append all other required infotypes to itab</b>
APPEND '0003' TO gt_infotypes.
CALL METHOD go_employee->get_infotypes
    EXPORTING
      i_itlist      = gt_infotypes
      i_fromdate    = id_fromdate " start date
      i_todate      = id_todate    " end date
*      I_FILTER      =
      i_noauthcheck = 'X'
    IMPORTING
      e_result      = gt_infty_request
      e_retcd       = gd_retcd.

I think it that way. You are trying to compare and analyse old (don't say bad) programming school with a new (OO one) approach. Although, I am OO enthusiast and in any case I will try to convice you that OO aproach is better than classical one, you should know what SE30 was designed for. If you want to stress on OO design, use the one you mentioned, otherwise stick what SAP recommmends (please note, that I am "middle" school pupil, so I tried to learn all courses with my own experience and feelings from OO).
IMHO, OO aproach is a way of thinking, not something we can messure in sec. and compare to old school teaching. Some of your report should be desinged in classical way, some should be pure OO. Which one you choose, is up to you, your conclusions, your percives of ABAP language. For me OO was not injected in ABAP enough, to affect developers or to convince them using it in any case w/o doubts you have.
Regards
Marcin

Function Module to get pernr number based on first name and last name

Hi All,
What is the Function Module to get pernr number based on first name and last name.
Could you please help me.
T@R.
Vidya

hi Vidya,
you can get perner from PA0002 based on firs name and last name.
use select query and get perner.

Date fields and compare and get the later date of the fields

I am trying to compare these date fields and compare and get the later date of the fields
Tables are
TABCASER
TABCASER1
EVCASERS
Field
Are
TABCASER1.CASER_no
The dates are to be compared and then get the records with the highest or latest date value.
TABCASER1.CASERRECIEVEDDATE
EVCASERS.FINALEVDATES
EVCASERS.PUBLICATIONDATE
EVCASERS.PUBLICATIONDATE
TABCASER.COMPAREACCEPDATE
I have this code but I am trying to figure out what it all means.
I have several questions.
1.
1.     greatest it is used here to compare right? How do I then output this ? do I store it to a var (coldfusion) ultimately , I wish to send it to a page of records
2.     is it necessary to use todate? And to_date? What does this do?
3.     decode, is this necessary too. What does this do? NULL?
4.
5.
6.     when I do get the query results how do I send it to coldsuion and out put to a display.
Someone sent me this code.
is there abetter way of doing this? To compare the dates and store in a var to display. thanks
Here is my code below:
Greatest(
     CASE
          WHEN INSTR(TABCASER1.CASER_no,'-CE') > 0 THEN
     decode(TABCASER1.CASERRECIEVEDDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER1.CASERRECIEVEDDATE)
                         WHEN INSTR(TABCASER1.CASER_no,'-ERNIE') > 0 THEN
     decode(EVCASERS.FINALEVDATES,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.FINALEVDATES)
                         WHEN INSTR(TABCASER1.CASER_no,'-MONIE') > 0 THEN
     decode(EVCASERS.PUBLICATIONDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.PUBLICATIONDATE)
                         WHEN INSTR(TABCASER1.CASER_no,'-NADINE') > 0 THEN
     decode(EVCASERS.PUBLICATIONDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.PUBLICATIONDATE)
                         ELSE
     decode(TABCASER.COMPAREACCEPDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER.COMPAREACCEPDATE)
                    END
          ,decode(TABCASER.COMPAREACCEPDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER.COMPAREACCEPDATE))
          between TO_DATE('#dateformat(form.startDate,"mm/dd/yyyy")#','MM/DD/YYYY') and TO_DATE('#dateformat(form.endDate,"mm/dd/yyyy")#','MM/DD/YYYY')
is there abetter way of doing this? To compare the dates and store in a var to display. thanks

Hi
If you have date datatypes than:
select
greatest(TABCASER1.CASERRECIEVEDDATE, EVCASERS.FINALEVDATES, EVCASERS.PUBLICATIONDATE, EVCASERS.PUBLICATIONDATE, TABCASER.COMPAREACCEPDATE)
from TABCASER, TABCASER1, EVCASERS
where ...-- join and other conditions
1. greatest is good enough
2. to_date creates date dataype from string with the format of format string ('mm/dd/yyyy')
3. decode(a, b, c, d) is a function: if a = b than return c else d. NULL means that there is no data in the cell of the table.
6. to format the date for display use to_char function with format modell as in the to_date function.
Ott Karesz
http://www.trendo-kft.hu

Error return immediately using GET pernr (PNP logical db)

I have a requirement to use HR PNP logical database for a report. The report should display the values from employee's infotypes. Should the user does not have authorisation on one or more infotype, the column field for that infotype should be left blank.
I tried using 'Get Pernr' but system will return error immediately that user does not have authorisation on any of the infotypes. Please advice how should I code my report in order to fit into my requirement.

There is afunction module to disable the infotype authorization check ( do a wildcard search in se37 for 'HRINFAUTH* ).. call that before the Get Pernr event & implement explicit authzn checks in your program..
~Suresh

Get Pernr

Hi,
I've written an abap program using the logical database PNP to select the employees record using the statement 'Get pernr'. I would like to know if there are ways to get the total number of records that can be selected.
Thanks,
Francis

Thats not passible. Imagine having a select statement, there is no way of getting the number of resulting rows ahead the statement. you have tp process the select statement twice, first to get the amount, and then to ge tthe rows. in the first step you can optimize the select with count(*), but nevertheless, it is executed twice. So you have to execute the logical database in advance, there are funcion modules to do that. For performance reasons, thats not a good choice.
On the other hand, when the get event is triggered and your program is getting the first rowm most work by the database is done and you're only fetching row by row.

I was on iTunes on my computer trying to drag a song from my iPhone 4 to my computer but when I connected my phone to the computer using a USB cable then it said that it couldn't connect to my phone because I need to get the later version of iTunes. How?

I was on iTunes on my computer trying to drag a song from my iPhone 4 to my computer but when I connected my phone to the computer using a USB cable then it said that it couldn't connect to my phone because I need to get the later version of iTunes. How do I do that?

Hi Soccer4461,
If you need to update your iTunes software, you may find the following article helpful:
OS X: Updating OS X and Mac App Store apps
http://support.apple.com/kb/ht1338
Regards,
- Brenden

I have Windows Vista and cant upgrade right now to windows 7 so how can I get a later version of Photoshop like CS6?

I have Windows Vista and cant upgrade right now to windows 7 so how can I get a later version of Photoshop like CS6? I cant find a donwload link anywhere. Please help!

You download cs6 trials from here:
Download CS6 products

How to read personal no's on selection in LDB without using GET PERNR

Hi to all
I am using Logical data base PNP and selection screen 900.
Now my requirement is to retrieve personal no's which are entered at selection seperately without using GET PERNR.
Ineed all the pernrwhich are entered in selection.
How to do that.
Please guide.
Regards
Anubhav

Hi,
You can do as SUJIT said or use GET PERNR and assign PERN-PERNR to Workarea and then append that to internal table.
DATA:
ITAB_PERNR like standard table of PA0000-pernr,
wa_pernr like line of ITAB_PERNR.
GET PERNR.
wa_pernr-pernr = pernr-pernr.
append wa_pernr to ITAB_PERNR
Hope this would help you.
Regards
Narin Nandivada.

Regarding the get pernr function

Hi guys,
          Got to know that when we use get pernr it automatically checks for the autherization on pernrs to view data.
    Would like to know who all have access to see which pernrs? Can i get any ideas on this....
Thanks in advance
Abhi

Triggers the associated events when data is read in an executable (type 1) program using a logical database.
node is a node in the logical database that is assigned to the report (type 1 program) in the program attributes. You must declare the node in the report using the NODES statement (or the TABLES statement, if the node is of the type "table").
The node node corresponds to a data object of the same name.
node is available for processing during the flow of the logical database. Moreover, you can also make reference to the fields from the node that lie on the access path for node in the logical database associated with the report - unless the node is of the dynamic dictionary type.
Notes
You can use the event "GET dbtab." only once in the report.
The GET events are implemented internally as FORM routines. This makes all data objects declared with DATA local, that is, they are only recognized and addressable within the event. This also applies to AT SELECTION-SCREEN ....
The logic is somewhat different for nodes of the dynamic dictionary type. You must declare these nodes in the report using the NODES node TYPE type statement. In this case, type a dictionary type from the logical database for the node node - that is, the type of the data object node assigned to the node node can differ in different reports. In this case, the data object node is local to the -GET event and has the structure type. Outside the -GET event, a (global) data object node also exists and has the static type assigned to the node. The actual data is, however, returned in the local field node and is available only within the -GET event.
Example
The program uses the logical database F1S which has a structure where the table BOOKING appears below the table FLIGHT.
NODES: SFLIGHT, SBOOK.
GET SFLIGHT.
WRITE: SFLIGHT-CARRID,
         SFLIGHT-CONNID,
         SLFIGHT-FLDATE,
         SFLIGHT-PLANETYPE.
GET SBOOK.
WRITE: SBOOK-BOOKID,
         SBOOK-CUSTOMID,
         SBOOK-ORDER_DATE.

Get pernr late

Similar Messages

Maybe you are looking for