Get phone number when open tcp socket

I can get phone number and other info of phone when mobile connect to server by http on GPRS, but can I get phone number when connect by tcp socket?

When you open a tcp connection by socket from mobile phone to IP server, you use ip end to end connectivty. In fact, when you use GPRS support on your mobile phone this one have a public IP address used to establish an IP connection to an other IP device.
If you want to get the phone number, two solutions :
1/ you transmit the phone number like a datastream on you socket. But it's a static solution, because you must enter the mobile number as a input (through a textfield form or somethink like that)
2/You take the phone number in the memory of your mobile phone (Agenda). But it's so compicated because that's depend of type of mobile. The memory design is dedicated mobile by mobile.

Similar Messages

Lost my phone number when switching to Sky BUT can...

Lost my phone number when switching to Sky BUT can I get it back if I switch to BT line rental?
Hi, my elderly parents switched to Sky FROM TalkTalk for their phone & BB several months ago and between TT not wanting to release the number ( I believe) and Sky wanting the money the switch went ahead even tho` Sky assured that if there were any probs the trans` would be halted.. Yeah pigs fly..
I know that this prob is between the evil twins but I have read that if the line was transfered to BT then the number could be recovered?
I have been told by TT that the number has been given back to Openreach and it is now not possible for them to re-activate it so Sky could then transfer it to them.
I have spent several months (on & off) many phone calls and emails/letters to try and resolve this..
Is this possible or have I been fed another load of untruths?
Could my father wait until he is out of contract with Sky and switch to BT if BT can recover his number?
I know that a diff number seems trivial but they are both getting on and keep forgeting they have a new number ( they had the number for 30+ years)
Any advice MUCH appreciated.. I had hair before all this happened

Its one of the risks you take, when you change service providers. Its a common problem which has been mentioned a number of times on this forum.
Service Providers like to keep you as a customer, and can make it very difficult for you, even though they are not supposed to.
Sometimes there are technical reasons why a number cannot be retained, especially if its a provider with their own exchange equipment and core network.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

HT5538 I have a different phone number when traveling, that the one registered in my account. How can I add it?

I have a different phone number when traveling, that the one registered in my account. How can I add it?

Lost information
https://www.adobe.com/account.html for serial numbers or subscriptions on your Adobe page... or
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

I get missing fonts when opening a PDF, but the fonts are activated, I get garbage

I get missing fonts when opening a PDF, but the fonts are activated, I get garbage

The activated fonts are not the same version as those in the PDF. If you use Type>Find Font and replace the fonts with ones from your computer does it work?

How do i switch information and phone number when they both say no service

how do i switch information and phone number when they both say no service

Please re-phrase the question. This doesn't make a lot of sense.

Getting email but when opened the message isn't from sender, from 2008

Just started today. Getting email and when opening the message is from an old email Dec 2008 and not from sender. I have Aol as isp and the good message is on aol. What is up?

You mean in Safe Boot attempt, the Radian never stopped?
"Try Disk Utility
1. Insert the Tiger Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.

GETTING A GPF WHEN OPENING THE UNDO SCREEN IN PERFORMANCE ANALYZER(OFSA)

제품 : OFSA_PA
작성날짜 : 2003-04-25
GETTING A GPF WHEN OPENING THE UNDO SCREEN IN PERFORMANCE ANALYZER(OFSA)
========================================================================
PURPOSE
Problem Description
고객이 PA에서 Menu -> "Undo" 화면을 선택하면
무시닫기 에러(GPF)가 발생함.
Workaround
Solution Description
DATA_IDENTITY table에 16000 rows보다 더 많이 들어가 있으면 발생한다.
그러므로, 과거 data 즉, undo가 필요 없는 자료를 삭제를 해야한다.
Reference Documents
note : 134609.1

Hi Titan, this sounds like an IE security setting issue. Things to do:
1. In Internet options>Security>Local Intranet, make sure "Enable Protected Mode" is not selected.
2. Under Sites>Advanced, add https://*.sharepoint.com (and make sure "Require server verification..." is not checked).
3. Under Security>Custom Level, scroll all the way to the bottom and make sure "Automatic logon with current user..." is checked.
cameron rautmann

TS4268 my iPhone won't even show a phone number when i turn on iMessage all it shows is an email, Does anyone know ho to fix this? i tried resetting and it didn't work.

my iPhone won't even show a phone number when i turn on iMessage all it shows is an email, Does anyone know ho to fix this? i tried resetting and it didn't work.

What shows under Settings>Messages>Send & Receive>Start new conversations from? Is your number ticked rather than your email address?

Why does Firefox get hung up, when opening new pages? I've tried disabling plugins and extensions to no avail.

Initially, when I open Firefox everything opens very quickly. However, after several minutes it gets hung up when opening new pages. I have close the browser and reopen it to start over. But each time it does the same thing. Works well at first then poops out. The trouble started yesterday. Before then, I never had any problems.
I've tried disabling all the plugins and extensions, but it doesn't make any difference.

Try to repair the disk permissions:
* http://thexlab.com/faqs/repairprocess.html
* http://support.apple.com/kb/HT2963 Troubleshooting permissions issues in Mac OS X

Can't get phone number up when sending an iMessage

When setting up a new iphone 5 c can't seem to get the iMessage to work properly meaning cannot send or receive messages and when it does work can only get it to come up as an email not phone number and wen anyone txts me to my number messages don't come through

Your cell phone number will be grayed out under You can be reached by iMessage at - that can't be deselected on an iPhone with iMessage. If your phone number is grayed out and can't be selected under Start new conversations from, that is likely due to the waiting for iMessage activation problem.
http://support.apple.com/kb/ts4268

I sometimes get Error 42 when opening a TCP connection - how can I fix this ?

In my Labview application I am opening a TCP connection in an identical way to the Data Client example. I am using a direct connection to external equipment using an ethernet crossover cable. The error occurs on at least 2 different PCs.
The error can occur regardless of whether anything is connected to the ethernet port of the PC.
The only way I have found to clear the error is to power down the PC and restart with a connection to the office LAN. Then I can swap back to the crossover cable and talk to the remote equipment once again, ...unitl the next time the error occurs.
I have LabView 6.0 running on Win98.
Any help greatly appreciated.

Jeremy,
Thanks for taking the time to answer
I already checked the link you suggested but I am connecting to my remote instrument with a 2m cross-over cable.
I Have looked into this a little further, it seems the sequence of events is as follows -
1. After some hours the connection gets lost.
2. TCP Read returns error 66 - Connection was closed by peer.
3. If I try to restart my program I get Error 42 at TCP open Connection.
4. Rebooting the PC doesn't clear the error 42 problem.
5. If I try to PING my instument I get "Host unreachable".
6. I have to "refresh" my network card by connecting to our LAN and either opening a file on another PC or simply sending a PING to another PC.
6. I can then reconnect my remote instrument via cross-over cable
and we're up and running for another few hours.
I get the same problem on two different PCs with different NICs and different OS (Win98 and WinME)
I am assuming that because a reboot has no effect that its not a memory allocation problem.
It seems like LabView stops talking to the NIC and then gets locked out some how.
Any other tips ?

My iMessage will not activate with my phone number when I recieved a new apple ID.

I made a new apple ID because my old one would not let me download any new apps from the app store.
Everything works great with my new appleID EXCEPT it will not let me use imessage with my phone number.
I have tried network resets, turning on/off the restrictions, everything.
Plus... if and when i get iMessage to verify with my phone number.. How do I connect my Macbook, iPad, and iPhone to all sync with my NEW apple ID and get my iMessage working on all three of them with my phone number?

iTunes Store & Mac App Store: About payment card authorization holds

How can I see a contact's entire phone number when iphone has large text?

Hi everybody,
I changed the font on my mom's iphone 5 to a larger size (but not the largest available) so it's easier to read. However, now when trying to view one of her contact's phone numbers, the number cuts off at seven digits and follows with dots, for example "(123) 456-7..."
Perhaps it's a silly question, but how can I view the entire number without reducing the font size? When I try to select the number it dials the contact. I wouldn't want to cut and paste, or copy it every time just to see the entire number. Any help would be much appreciated!!!!!

The contact in which the photo does appear (along with the contact's name as well) is one that I added myself. I have photos added for many of the people in my Contact List, but neither their photo nor their name appears to me whenever they call or text me.
I know how to add a photo to a contact's information within my Contact List. I need to know how I can make that photo (or even the contact's name) appear whenever I have an incoming call/text from them. What I am seeing is just their phone number, and I do not know everyone's phone number well enough to recognize from whom I am getting a call/text. It would be much easy if their photo or name appeared instead.
TYSM for your speedy reply to my query, but the information that you have provided does not solve my issue.

How to get highest number of open cursors within the current calendar day

Hi all ,
i need to know how to get the highest number of open cursors within the current calendar day.
Thanks ,

823030 wrote:
the issue is my customer is getting the error ORA-01000: maximum open cursors exceeded and we need an sql statment that gets the following values :
-highest number of open cursors experienced in the current calendar day.
-current open cursors
-and maximum open cursorsThis error is rare. It happens when
a) the value of the open cursor parameter is set extremly low (default is something like 1000). Low would be something like 10.
b) <strike>you have many concurrent users(=sessions) and </strike>the application does not use bind values
In this case each select will open a new cursor, instead of reusing it.
c) you have a select that opens a cursor for each line. This can happen with a statement where you have the CURSOR keyword somewhere in the select or where clause. Those cursors will be closed when the select is finished. But during the run time of the select, all cursors stay open.
To track the number of "open cursors" during the day you would need to implement some monitoring. Maybe based on the view that was already mentioned.
Edited by: Sven W. on May 16, 2011 2:30 PM - since the parameter is on session level, other open cursors should not influence it much.

Error message on phone number when sending imessages

my imessages are sending from my email account, when i went to settings>messages> recieve at> I have an error code at my phone number and only able to send as an email

cmp007 wrote:
Is there anyway to keep the stuff on the phone. I really need the stuff in it and cant afford to wipe it clean
The only way to keep your stuff on the phone is if you remember your passcode. Like the other poster mentioned, someone probably tried to get into your phone and tried various combinations. After 10(?) attempts, the iphone will lock and make you restore your phone from itunes.

Get phone number when open tcp socket

Similar Messages

Maybe you are looking for