Get photos problems in cs5

When I go to get photos from my card reader in adobe bridge, the window opens fine, but when I hit choose file, it freezes up and I have to force quit it. I am using MAC. Anyone got any suggestions. All other aspects work just fine.

Hi, Dan and JTV,
You had posted your question in a forum dedicated to the Adobe Community Help application, so I'm going to move your question to the Adobe's Photoshop forum for Mac users. There are PS experts there who can help you.
Kirsti
Adobe Community Help team

Similar Messages

  • Get photo problem

    When I attempt to get a photo from a folder using organizer, some target folders disappear from the screen when I click on it.

    Hi,
    please go to the location and check out is it present on the hard disk or not.
    Also, please confirm your PSE version

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • I cannot get photos placed in InDesign CS5 to show up only as grayscale/black. When a separation is done, part of the photos show up on both parts of the color separation. I've been hunting for a solution for hours.

    I cannot get photos placed in InDesign CS5 to show up only as grayscale/black. When a separation is done, part of the photos show up on both parts of the color separation. I've been hunting for a solution for hours. !

    ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
    (I use iTunes 11.1.5.5)

  • I'm running iTunes 10.5 on my Macbook Pro and software 4.1 on my 2g iPod touch and having problems getting photo's to sync. Same error iPod can't be synced req'd file can't be found. Tried deleting the photo cache, restoring the iPod etc but to no avail.

    I'm running iTunes 10.5 on my Macbook Pro and software 4.1 on my 2g iPod touch and having problems getting photo's to sync. Same error, "iPod can't be synced req'd file can't be found". Tried deleting the photo cache, restoring the iPod etc but to no avail.

    Try here:
    iTunes: Unable to sync photos
    Usually deleting the iPod Photo Cache Folder works. Note that if you sync via the folder method, make sure you dlete all the ifolders since :
    The iPod Photo Cache stores the photos that are optimized for display on your iPod, iPad, or iPhone. The location of this folder depends on the syncing options you select. In iTunes, if you change the selection in the “Sync Photos From” pop-up menu, a new iPod Photo Cache folder will be created (and the previous folder will remain).

  • Updated iMac to Yosemite.  Now when in LR5 and try to edit photo in PS CS5 I get error 15 and it will not open.  I've uninstalled PS and reinstalled it but still get the same error.  Any thoughts out there.

    I just upgraded my iMac to Yosemite.  Now when in LR5 and try to edit a photo in PS CS5 I get error message 15.  It says to uninstall and reinstall PS CS5.  Done that and error is still there.  I can open PS outside of LR but not inside.  Any thoughts?

    The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

  • Get photos from camera option in Bridge CS5

    I really would like to use the "Get photos from camera" option in Bridge CS5, as it would save me a few steps in my normal workflow (dowload images from my Canon 40D with EOS utility, convert to DNG, delete CR2 files, update metadata with copyright information), but when I try with with a large number of images, some RAW images are not downloaded and converted. All jpg images are downloaded. So I would get e.g. images 1.dng, 1.jpg, 2.dng, 2.jjp, 3.jpg - in othere words the 3.dng file would not download. Any help would be most sincerely appreciated.
    BTW - when I use the Canon EOS Utility, all files get downloaded, but then these are all cr2 files.
    I use Windows 7 64-bit as my OS.
    My thanks in advance.

    On further testing, it appears that the download function works fine as long as the "Convert to dng" function is left unchecked. So the file loss occurs during the conversion process. I have looked but cannot find an answer - is there a way to batch convert downloaded cr2 files to dng from within Bridge? Or does one have to load up the DNG Converter separately?

  • Since installing LION having problems getting photo images to upload?

    since installing LION having problems getting photo images to upload? anyone else havie this problem? I did finally get a message that the format was wrong, but I have changed nothing on my camera. Only change was the installing of LION.

    This is from the Kodak site which says there is no Lion compatible driver/software yet, but it is coming in late August:
    http://support.en.kodak.com/app/answers/detail/a_id/41646/kw/os%20x%20lion/selec ted/true
    If you don't want to wait there is always this kind of device for less than $10 (I don't own or endorse it):
    http://www.walmart.com/ip/Moultrie-USB-2.0-SD-Card-Reader/14972138

  • HT201232 I have my Mac working on OS X Yosemite, i am having problems getting photos of my SD card inserted in my printer port across to the mac also I have aSamsung S4 mobile, same problem can please someone please help me

    Hi I have my Mac which works off OS X Yosemite, I have photos stored on an SD card inserted in a port off my Epson printer which is attached via usb. I cannot get photos across to the library on the Mac am also having the same problem getting photos off a newly purchased Samsung S4 mobile onto the Mac could someone with a bit of technical know how please assist me ..thank You

    Try what Terence Devlin posted in this topic:
    Terence Devlin
    Apr 14, 2015 11:21 AM
    Re: Is Iphoto gone ? i want it back!
    in response to Johannes666
    Recommended
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Problem getting photos

    I insert my card reader into the USB port.  The path for the photos is into my C: drive.  The pictures are successfully shown in Organizer and in fact are in the C: drive.  Now comes the problem;  I click on each photo in Organizer, and Elements 6 cannot locate the file.  When I did a metadata on the picture it shows a different path, into my H: drive which is my external hard drive where my photos are backed up.  As you can imagine, I will be happy to hear the solution so I thank you in advance.

    I took a screen shot placed  it into wordpad but was not able to copy and paste into this email.
    What appears is as you have below with the exception of the first line "C:>volumeid c: 66de-00da" and the last line "Volume ID for drive c: updated to 66de-00da"
    On the command line I enter the path and  "volumeid h:  f828-50df  g: 595b-27b7"  and I get the response as I've just described.
    sigh.............
    Howard
    Date: Thu, 9 Jul 2009 21:20:34 -0600
    From: [email protected]
    To: [email protected]
    Subject: Problem getting photos
    When you type the command:
    volumeid h: F828-50DF
    what exactly is the response?  It should look similar to:
    C:>volumeid c: 66de-00da
    VolumeID V2.01 - Set disk volume id
    Copyright (C) 1997-1999 Mark Russinovich
    Sysinternals - http://www.sysinternals.com
    Volume ID for drive c: updated to 66de-00da
    If it doesn't, either type in the exact response or post a screen shot.
    I forgot to mention that in c:\windows the file appears as volumeid and not volumeid.exe.
    That's because your Windows Explorer is configured (by default) to not show the extensions (e.g. ".exe").  It shouldn't matter.
    Next I have been attempting to run the psedbtool which is still on my desktop.
    You need to use Windows Explorer to navigate to the folder c:\psedbtool and then double-click "run.bat" (which may show up as simply "run").
    >

  • Problem getting photos from canon powershot

    Just recently I have not been able to get photos from my SanDisk card. When I put the card into my HP Photosmart printer, either nothing happens or I get an error message on the printer. I have an iMac (intel) and I recently upgraded everything to Snow Leopard.
    I then thought to bypass the printer altogether and go straight from the camera to the computer, but then I get a message "failed to initiate" . . . any ideas?
    Thanks in advance!
    Marcie

    Oh, I made a mistake: the message I get is "failed to initialize program"

  • Problem getting photos into an iPad Air

    I plug my previously working Apple Camera Adapter (holding SD card containing photos) into an 30-pin/lightning adapter and this assembly into my iPad Air (model MD786B/A) - but photos now don't show up to be transferred.  So how do I get photos into the iPad from an SD card ?

    1. Was the SD card used in a camera and is that how the photos got onto the card?
    2. Did you previously use the 30 pin SD Card Adapter with the 30 pin to Lightning Adapter successfully?
    The SD card readers (either 30 pin to SD Card adapter or the Lighting to SD Card Camera Adapter) are designed to be used with SD cards that have been formatted and used in a camera. The iPad expect to see a specific organization of the photos. First there must be a folder named DCIM. In side that folder photos must have specific naming structure. IMG_xxxx.jpg is correct where xxxx refers to a four digit number.

  • Error message when trying to import photos into Bridge CS5

    Hi, when trying to import photos from a card reader into Bridge CS5, I click "get Photos" and get the following error message: "cannot obtain all files from this device. Please ensure the device is connected properly, or that the battery is charged". It imports a small selection of the images from the sd card but that is all. I'm currently using a Windows 7 desktop computer with plenty of ram.
    Any suggestions?

    Hi station_two, thanks for your quick response.
    I can confirm that its not the card reader/cable, usb port, defective sd card or the computer itself. I have already eliminated all these potential culprits through trial and error using different several ports/cards/readers and even a different computer (although not into bridge).
    I am able to copy the photos from the same card/card reader into Lightroom on the same computer (incidentally, when using Lightroom it uses the term 'Import photos'!)
    I am using a number of Panasonic Lumix Micro 4/3s cameras (GH1/GF1/GX1). The sd cards have a combination of RAW and JPEG and the problem exists whether using 4GB or 16GB cards. I have plenty of space left on my hard drive and as stated, I'm running a fast desktop PC (Win 7 Ultimate 64 bit OS) so I'm certain this is not the issue.
    Could this possibly be a problem with the cache?

  • Printing problem in cs5 and imac 27

    I have been running my Epson Stylus Pro 4800 on a macbook pro and cs3, for a couple of years with no problems whatsoever. I have now upgraded to a new iMac 27"and have had nothing but problems with the 4800. I have made my own profils and used Epson paper profiles but the prints are not as colourful as they used and totally wrong as well. I am also getting totally oversized prints compared to what image seize in ps is set to be.....for example, I have been doing a 10x21 test picture on Premium Lustre paper (photoshop is managing the colours through CS5, but it is printing the image at least 1,5 the size that it should be. All my settings are correct, dpi is 300, I'm printing at 1440dpi resolution on the correct profiles for the paper. I am at a loss to understand why this is happening. Is anyone able to assist me?
    I can do the printing in preview  and that is looking quite ok. But trough photoshop it is bad colors and wrong size on the print.
    Regards Ulfja

    I saw you're having a printing problem with CS5 while using an Epson printer. I'm having a problem too. Read my situation and see if you think it's similiar to yours. I posted this about an hour ago but have not heard from anyone yet.
    I'm having problems getting good prints when using Photoshop CS5 with my Epson Photo R2880 printer, problems I never had with CS4. Here's the situation:
    If I take a PSD file and print it using CS4, everything works out perfectly. But if I take that same PSD file and print it out using CS5, the print is now offset top to bottom, as well as left to right, along with a 1/8" black strip being printed down the right edge of the paper. As far as I can tell, everything is set the same.
    I've compared all the print information found in the Print dialog summary box between CS4 and CS5 and everything appears to be the same. I've verified that I'm using the latest print driver with my printer, and I am. It's 8.27.  I've verified that I've checked off the box to center the print to the paper, each time I've made a print. And in trying to figure out what's going on, I've discovered that this problem occurs with any paper size when using CS5, but not with CS4.
    I'm stumped and frustrated and without any more ideas as to what I should do next, except to always print my projects using CS4. If anyone has an idea for me, please let me know!
    I'm sorry I don't have any suggestions for you. The colors I'm getting in my prints from CS5 seem to be alright, but not the positioning on paper. It keeps offsetting and running a black stripe down one side. Fortunately I have CS4 on my computer that I can use to print from, but it shouldn't be this way.
    Good luck!

  • In ADOBE BRIDGE CS6 "folder can not be created" appears when getting photos from camera

    Has anyone seen this when getting photos from camera in ADOBE BRIDGE CS6?
    "Folder cannot be created"

    I solved the problem myself.
    jwerth2

Maybe you are looking for