Get Publish failed due to network error on Publish

Everytime I make a change to my web site within iWeb then do a Publish I get a message "Publish failed due to network error. Check your internet connection and try again".
Although I get the above message my changes do get made on my web site.
I am on high speed internet. I have received this message every time I do a Publish after making changes for the last several days.
http://web.mac.com/johnnelsonhomes is web site address. Again, changes are getting posted most times, although not always.
Any ideas?
Thanks in advance.

I have been having the same problem. I can access my iDisk, but cannot publish to it. When I try i get a 'cannot publish due to network error' message. I can successfully upload the same website to my 'GoDaddy' hosting acct. This is what I have done so far without success:
Turned off all commenting and searches and .mac specific services.
Tried connecting directly to my DSL modem to try to eliminate any problem that may be introduced by my router or firewall settings.
Reformatted my hard drive and re-installed OSX (clean). Patched the new system with all available updates. I did not restore from my back-ups to ensure that any corrupted settings would not be brought forward to the new install. I then created a simple one page site with iweb and attempted to publish to .mac. Even this failed. I am not sure what I could be missing. I had been publishing for months without any problem. Then I started getting this problem occasionally, and now I get it all the time. The only thing I can think of is if there is possibly a network latency problem causing the connection to time out.

Similar Messages

"Publish Error: Publish failed due to network error. Check your internet co

I am using the very latest version of iWeb. I have had it for a week.
First let me tell you the message that I got and then what I was doing prior to getting the message:
It said: "Publish Error. Publish failed due to a network error. Check your internet connections and try again."
I did check my internet connections and I called mt cable modem ISP. He put me through some tests and ascertained that the problem was not with the cable connection. I can connect to the web (of course) and I can send and receive email. The fellow at the ISP (Road Runner) told me that the uploading goes just fine but that the confirmation end of it is bad.
I have made 9 pages for my website. I clicked the button to publish the 10th page and got the message at the top of this post.
Then I called Apple Care and took advantage of the 90-day help warranty. The gal there had me try to publish to my private folder. That worked! I was able to publish to the folder and that message at the top of this post did not appear. It said that the page was published and did I want to visit it.
I ended up deleting the page about my friend Lerma, since everything was going fine until I did that page. AS I recall, there was a mixup with the pages and I thought I had fixed it.
Then I worked a little more on my husband's Memorial Site and tried to publish and got the same bad message as above, meaning that it wasn't just the page about Lerma but any page I might be doing since doing her page.
NOW THIS IS THE ODD PART:
I went to the website on Safari browser with the intention of checking out the other earlier pages, only to discover (happily) that my husband's memorial page (the beginning of it) WAS THERE even though I got that message saying that there had been a network error. Lerma's page, however, was NOT there.
I am between happy knowing that a page can show up on the website even though I get a message saying that it did not, but anxious knowing that if I am getting Publish Error messages, something is screwy with the program.
I will continue to try to publish to the Internet, but meanwhile I welcome any observations and happy accounts of how they got the same message but everything ended up fine after a while.
Meanwhile I am going to be working on my pages even though right now I am getting those messages saying that they could not publish due to network error.
I need a break.
— Lorna in Southern California

Hi Lorna!
Sorry to hear that you're getting the dreaded
"Publish Error" message from iWeb. Lots of people
have reported getting this type of error...and I
don't think it ever really has much to do with the
network...at least nothing that can be fixed. The
fact that you have been publishing just fine up until
now is a good thing. Some people have NEVER been
able to publish to the web. Hopefully this problem
will clear itself up. Maybe it's just sunspots or
something. Probably someone thinks you need a break,
too.
Is this the kind of thing that would warrant me going back to the Apple Store to get an exchange???
— Lorna in Southern California

Photo upload to iCloud fails with the error message 'Upload failed due to network error'. Ideas?

I am trying to get my photos on my Mac Mini onto my iPad 2 via iCloud. I have tracked the problem down to upload failure from Mini to iCloud. 1St (&every) photo upload fails with the message 'Upload failed due to network error'. Any ideas?

I doubt this issue is related to the Mac Mini specifically.
I have 44 photos shot with an iPhone 3G that will not upload to iCloud Photo Library. I try and drag-and-drop them onto the web interface and I get the same error message you did:
Upload Failed
44 items were not uploaded due to a network error.
However, I have another 62 photos shot with the same iPhone 3G that upload without issue. And I just uploaded 440 photos from an iPhone 4 without issue.
I thought it may have something to do with certain EXIF tags missing on the photos that would not upload but I have not been able to figure out a pattern when comparing photos that work and photos that don't work.
The photos that won't upload open fine in QuickLook, Preview, and Pixelmator so I doubt the image is corrupted in some way.
I can AirDrop the photo to my iOS device and it will upload to iCloud Photo Library, the photo/video count will be incremented on the iOS device and iCloud Photo Library but the photo will never be displayed in iCloud Photo Library. When I delete the photo on the iOS device the photo/video count will decrement on the iOS device but will remain the same in iCloud Photo Library. When this occurred the following error was thrown in the iCloud Photo Library web interface:
Expanding Details shows the following log:
https://gist.github.com/jameswthorne/757e319b9fee63119890

HT3204 When attempting to burn an audio cd, I get an error message that says-burning failed due to unknown error (4280)? It has been working fine, until today...what does this mean??

When attempting to burn an audio cd from my playlist, I get an error message that says, burn failed due to unknown error (4280). It has been working fine for months...any solutions?

I have the exact same problem.
Been searching through this site to try and find an answer but still not come up with anything.
The wierd thing is that a couple of days ago it was working fine, and suddenly overnight it's stopped working.
The only solution i've found is that you need to have administrator rights as it says in the posts on the site below:
http://www.emergingearth.com/itunes-7-cant-burn-cds/
Noticed by the diagnostic in your post that you dont have admin rights like me so that mite be the problem. Not sure if this is the right solution though.
Windows XP

How do i reinstall pages, after it failed to install due to network error ?

I purchased page's from the app store, all seemed well, then i get a message on my screen telling me failure due to network error
i then tried to go back to the app store to try a re install and the crummy thing is telling me it is installed
i have tried to get a solution by contacting Apple support, and that is useless , have searched to find a resolution but
i haven't found a sound thread to my problem ...
please some advise if you can
Thank you Aid

Why not try the App Store forum, Pages, and MacBook Pro.
Mac App Store
MacBook Pro
Pages
Apple - Support - Site Map

"JCA Binding execute of Reference operation 'Write' failed due to: Translation Error.

Hi, i am trying to read a comma delimited file using an inbound file adapter, i have used a mediator to route records to the outbound file adapter.My input.txt file contains 10 records as Fname,Lname.I have used native format builder to generate xsd. To achieve transformation,in the mediator i have mapped only the Fname from source to traget using a for-each loop.I am trying to publish records in the batches of 2 so i have configured inbound file adapter accordingly.My inbound file adapter reads the first two records and the same is visible at the em console mediator instance(payload), i am even able to see the first two records being transformed in the transformed payload in the mediator instance detail but at the outbound file adapter i get an error saying :
Error during invoking 1-way operation "Write" on target service "writeFile"
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Write' failed due to: Translation Error. Translation Error. Error while translating message to native format. Please make sure that the payload for the outbound interaction conforms to the schema. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
When i map both the Fname and Lname in the xsl map file i get the output.But i only need one field at the outfile i:e either the Fname or the Lname.
Given below are the details of the interface:
My Interface Flow:       InboundFileAdapter--------ReadsFile------->Medaitor------Transformation----->OutboundFileAdapter-----writesFile
Input Payload(comma delimited text file) as,
Brad,Pitt
Keanu,Reaves
Martin,Lawrance
Johnny,Depp
etc
etc
Schema definition for payload:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
            xmlns:tns="http://TargetNamespace.com/readFile"
            targetNamespace="http://TargetNamespace.com/readFile"
            elementFormDefault="qualified"
            attributeFormDefault="unqualified"
            nxsd:version="NXSD"
            nxsd:stream="chars"
            nxsd:encoding="US-ASCII">
<xsd:element name="Root-Element">
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="Employee" minOccurs="1" maxOccurs="unbounded">
          <xsd:complexType>
            <xsd:sequence>
              <xsd:element name="Fname" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
              <xsd:element name="Lname" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
</xsd:schema>
XSL Map:
<xsl:template match="/">
    <imp1:Root-Element>
      <xsl:for-each select="/imp1:Root-Element/imp1:Employee">
        <imp1:Employee>
          <imp1:Lname>
            <xsl:value-of select="imp1:Lname"/>
          </imp1:Lname>
        </imp1:Employee>
      </xsl:for-each>
    </imp1:Root-Element>
</xsl:template>
</xsl:stylesheet>
Please help me with the above mentioned error and if above transformation is possible using a mediator instead of BPEL
Regards,
Saif

Hi Saif, Are you using the same xsd for the outbound (write) file adapter as well? In that case, you may need to map both the names (Fname and Lname) but leave the name which you do not want to be written to the file as an empty text. For example, if you would need to map only the Lname, but not the Fname, the xsl will be like,
<xsl:template match="/">
    <imp1:Root-Element>
      <xsl:for-each select="/imp1:Root-Element/imp1:Employee">
        <imp1:Employee>
          <imp1:Fname>
          <xsl:text disable-output-escaping="no"></xsl:text>
          </imp1:Fname>
          <imp1:Lname>
            <xsl:value-of select="imp1:Lname"/>
          </imp1:Lname>
        </imp1:Employee>
      </xsl:for-each>
    </imp1:Root-Element>
</xsl:template>
</xsl:stylesheet>
Another option is to have a separate xsd with only one element (Fname or Lname) for the outbound file adapter, in which case you would need to map only one field.

Artifact harvest failed due to: Unexpected error import: Invalid jar file

Hi,
i am trying to submit the .biz and .proxy file to OER using Eclipse,
but i am getting the following error,
can anybody help me on it,
what i am missing ?
8332 [Main Thread] INFO com.bea.alsb.harvester.plugin.reader.OSBReader - OSB Config Jar Import / Validation starting.
<Mar 13, 2012 10:28:16 AM IST> <Warning> <ConfigFwk> <BEA-000000> <Setting transaction '6' as rollback only. Rollback reason:
java.io.IOException: Invalid jar file
at com.bea.wli.config.importexport.ConfigJar$LogicalJarForm.<init>(ConfigJar.java:1341)
at com.bea.wli.config.task.impl.UploadJarTask._execute(UploadJarTask.java:46)
at com.bea.wli.config.task.impl.SessionedTask$1.execute(SessionedTask.java:233)
at com.bea.wli.config.transaction.TransactionalTask._doExecute(TransactionalTask.java:217)
at com.bea.wli.config.transaction.TransactionalTask._doExecuteWithRetry(TransactionalTask.java:162)
at com.bea.wli.config.transaction.TransactionalTask.doExecute(TransactionalTask.java:142)
at com.bea.wli.config.task.impl.SessionedTask.doExecute(SessionedTask.java:236)
at com.bea.wli.config.task.impl.SessionedTask.doExecute(SessionedTask.java:191)
at com.bea.wli.config.task.impl.UploadJarTask.uploadJar(UploadJarTask.java:36)
at com.bea.wli.config.mbeans.Config.uploadJarFile(Config.java:442)
at com.bea.alsb.harvester.utils.ConfigJarUtils.importConfigJar(ConfigJarUtils.java:79)
at com.bea.alsb.harvester.plugin.reader.OSBReader.readQuery(OSBReader.java:196)
at com.bea.alsb.harvester.plugin.reader.OSBReader.readQueries(OSBReader.java:112)
at com.bea.alsb.harvester.plugin.reader.OSBReader.read(OSBReader.java:87)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.flashline.util.classloader.ContextClassLoaderHandler.invoke(ContextClassLoaderHandler.java:39)
at $Proxy0.read(Unknown Source)
at com.oracle.oer.sync.framework.MetadataManager.start(MetadataManager.java:630)
at com.oracle.oer.sync.framework.Introspector.<init>(Introspector.java:204)
at com.oracle.oer.sync.framework.Introspector.main(Introspector.java:430)
8426 [Main Thread] ERROR com.oracle.oer.sync.framework.MetadataManager - Artifact harvest failed due to: Unexpected error import: Invalid jar file
com.oracle.oer.sync.framework.MetadataIntrospectionException: Unexpected error import: Invalid jar file
at com.bea.alsb.harvester.utils.ConfigJarUtils.importConfigJar(ConfigJarUtils.java:97)
at com.bea.alsb.harvester.plugin.reader.OSBReader.readQuery(OSBReader.java:194)
at com.bea.alsb.harvester.plugin.reader.OSBReader.readQueries(OSBReader.java:112)
at com.bea.alsb.harvester.plugin.reader.OSBReader.read(OSBReader.java:87)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.flashline.util.classloader.ContextClassLoaderHandler.invoke(ContextClassLoaderHandler.java:39)
at $Proxy0.read(Unknown Source)
at com.oracle.oer.sync.framework.MetadataManager.start(MetadataManager.java:630)
at com.oracle.oer.sync.framework.Introspector.<init>(Introspector.java:204)
at com.oracle.oer.sync.framework.Introspector.main(Introspector.java:430)
Caused by: java.io.IOException: Invalid jar file
at com.bea.wli.config.importexport.ConfigJar$LogicalJarForm.<init>(ConfigJar.java:1341)
at com.bea.wli.config.task.impl.UploadJarTask._execute(UploadJarTask.java:46)
at com.bea.wli.config.task.impl.SessionedTask$1.execute(SessionedTask.java:233)
at com.bea.wli.config.transaction.TransactionalTask._doExecute(TransactionalTask.java:217)
at com.bea.wli.config.transaction.TransactionalTask._doExecuteWithRetry(TransactionalTask.java:162)
at com.bea.wli.config.transaction.TransactionalTask.doExecute(TransactionalTask.java:142)
at com.bea.wli.config.task.impl.SessionedTask.doExecute(SessionedTask.java:236)
at com.bea.wli.config.task.impl.SessionedTask.doExecute(SessionedTask.java:191)
at com.bea.wli.config.task.impl.UploadJarTask.uploadJar(UploadJarTask.java:36)
at com.bea.wli.config.mbeans.Config.uploadJarFile(Config.java:442)
at com.bea.alsb.harvester.utils.ConfigJarUtils.importConfigJar(ConfigJarUtils.java:79)
at com.bea.alsb.harvester.plugin.reader.OSBReader.readQuery(OSBReader.java:196)
... 11 more
Please help...
Regards,
yogesh

Hi Yogesh - when you say "i don't think the file is corrupt, because it works fine in eclipse", do you mean, you are actually able to publish them to a server and test those out?
Dont know your exact scenario, but when you say that you took the sbconfig from another machine and used it on your local system, cant we just go ahead with that? I mean, clean up your code base, and then import this latest "working" sbconfig and start afresh?
-Swagat

OMF export failed due to internal error

I get this error message whatever I do when I try to export as OMF:
"OMF export failed due to internal error"
I tried OMF 1 and 2.
I tried to uncheck "include audio".
I tried an extremely small project (one region, one track).
Always the same error. Problem is there's absolutely no information on what kind of internal error this is.
All other export options (AFF, Open TL and Final Cut) works.
Any ideas?

I suppose that beside CCM 4.1(2) you are using AC 1.4 (1), if yes, then you need to upgrade to AC 1.4 (1) ES11 or upgrade at least to CCM 4.1(3)ES42 or CCM 4.1(3) sr3c
HTH
//Jorge

Lync server call failed due to network issues

hi,
i receive an error while making a lync call to an internal user
"call failed due to network issues"
i have two ip's installed on My NIC but when i remove one ip of the ip's from
my nic, everything seems to work fine.
Kindly help

Hello Matt,
Hope you keeping well..!!
We are communicating with external customers lync server through federation option setup on our corporate lync server. We have received the federation setting from the customer with SIP address which has been setup on our corporate lync servers after
that we were able to browse the customer contact through corporate lync account.
We were also able to chat with external customer but however voice/video functionality are not working through same session. Whenever we try to dial out external customer lync account it ended with error message "call ended due to network issue".
We have checked the setting from corporate lync servers and network point of view but doesn't find any issue which cause the disconnection to voice/video over lync. Could you pl help or guide with the way.
Thanks

Error: NDMP operation failed due to media error

I scheduled a RMAN backup job on oracle 11g EM and sometime it failed when running datafile backup. The log showed the error come from media layer and did not specify detail message. We used secure backup to transfer data to tape. There are 4 tape drivers in service, but only one of them always return this error. Could anyone tell how to resolve the problem ?
RMAN-03009: failure of backup command on c1 channel at 01/23/2014 11:17:29
ORA-27192: skgfcls: sbtclose2 returned error - failed to close file
ORA-19511: Error received from media manager layer, error text:
   sbtclose2: Internal error - NDMP Data Service has exited prematurely.
   For more information, please check the transcript for this job ('oracle/33779.1').
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
Additional information: 1292
ORA-19511: Error received from media manager layer, error text:
continuing other job steps, job failed will not be re-run
And I found below logs in the secure backup scripts log. it that mean a network error?
10:16:42 await_ndmp_event: sending progress update
    10:16:42 SPU: sending progress update
    10:17:43 QTOS: received osb_stats message for job oracle/33656.1, kbytes 10452672, nfiles 0
10:17:43 await_ndmp_event: sending progress update
    10:17:43 SPU: sending progress update
    10:19:35 NWEM: saw tape write error log message ("tape write failed due to media error")
tape write failed due to media error
    10:19:35 MNPO: mover halted with reason=media error
    10:19:35 MGS: ms.record_size 65536, ms.record_num 0x28094, ms.bytes_moved 0x280940000
    10:19:35 QTOS: received osb_stats message for job oracle/33656.1, kbytes 10497280, nfiles 0
    10:19:35 MNPO: data service halted with reason=connection error
    10:19:35 SNPD: Data Service reported bytes processed 0x280B40000
    10:19:53 A_T: suppressing filemark output due to NDMP having written one
    10:19:53 A_T: writing marker label; here it is:

Judging by the transcript snips that you provided, I also believe that this is caused by a bad drive or bad media.
Start by looking at the output of the command :
# obtool dumpdev <tape_drive_name>
(replace "<tape_drive_name>" by the name of the drive which was used during the failed job).
Look for any errors or warnings during the date/time the backup job failed. These message usually provide a good idea about the problem that occurred.
Next try the same backup using the same media in another drive to see it the problem reoccurs or not. In case the problem reoccurs, there's a good chance that the media is bad. If the backup succeeds on another drive, then try the same backup using the original drive but with a new media. If the backup fails again on the same drive using new media, you should open a support request with the tape drive vendor. In that case, collect the logs from the tape library (and dump the tape drives is possible).
HTH,
Gio

'OMF export failed due to internal error' message

Hi,
Has anyone ever got an 'OMF export failed due to internal error' message when trying to export in OMF format?
I get that every time I try to export in that format.
How can I make it work?
Thanks and best,

Hello sj holcombe,
And welcome to Apple Discussions!
Have you had a chance to check out this Apple support document directly related to this issue? If not, it is a good place to start.
[iTunes displays a -69 error when syncing iPod|http://support.apple.com/kb/HT1210]
Hope it helps.
B-rock

Why is file syncing failing due to server error(s)?

I am working on an HTML file inside Edge Code. When I save, it fails due to 'server error' (no other details). I then get multiple 'conflicted copies' of the same file in my cloud directory. I clean this off and try to resave. It saves, then undoes the last few changes! It reverts back to a previous version of the file.
I guess I'll start working with the 'newest' conflicted copy or something. It's ridiculous. There are no internet issues on my end here, either, which is what I thought at first.
Extremely frustrating! I suppose I'm going to work locally, and then just try to sync. the file after I am done (and after I have made a duplicate in case Cloud tries to overwrite and save an older version of the file).
This pretty much makes cloud-based work fairly useless!

File Sync Links that may help... all the links I have, since I don't know the cause of your specific problem
-https://forums.adobe.com/community/creative_cloud/host_sync
-http://helpx.adobe.com/creative-cloud/help/sync-settings.html
-http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
-Size Limits https://forums.adobe.com/thread/1488242
-sync and email link http://forums.adobe.com/thread/1427516?tstart=0
-Phantom folder problem https://forums.adobe.com/thread/1490445
-an overview of assets https://assets.adobe.com/files

'Write' failed due to: Translation Error.

Hi
I'm trying to convert csv and write to a file using FielAdapters in 11g. While reading input i created .xsd using native builder. and using same for write fileadapter. my flow is ReadFileAdapter-->Receive-->invoke-->writeFileAdapter.
Is this right? when I deploy and run I'm getting
<01-Mar-2013 10:09:23 o'clock GMT> <Error> <oracle.soa.adapter> <BEA-000000> <JCABinding=> ReadInput ReadInputAdapter Service ReadInput was unable to perform delivery of inbound message to the composite default/ReadWriteFile!1.0*soa_40862c80-62ba-4425-b7e6-5fcfb5c5b4e4 due to: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{
summary=<summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Write' failed due to: Translation Error.
Translation Error.
Error while translating message to native format.
Please make sure that the payload for the outbound interaction conforms to the schema.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary>
,detail=<detail>Element not completed: 'TestRoot'</detail>
,code=<code>null</code>}
>
I want to convert csv and write as an xml to output file. can some body help me whats is wrong?
here is my xsd
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/ReadInput"
targetNamespace="http://TargetNamespace.com/ReadInput"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
>
<xsd:element name="TestRoot">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="TestRecord" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="C1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="C3" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="C4" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
and csv file
12, John, ryegate, Essex
23, Will, wilow, orlean
I also tried inbuild advane function on invoke activity
ora:doTranslateFromNative(bpws:getVariableData('ReceiveInput_Read_InputVariable'),'xsd/Hello2_8.xsd','Test','DOM')
even this didn't work.
can somebody help me how to write as xml from csv?
Thanks
Edited by: user11132693 on Mar 1, 2013 3:01 AM

whne i use transformer it is xslt which takes only values isn't it? And it writes only valuesNope, xslt can write xml... Actually, I'm not sure if I understand what your question is at the moment... Are you still facing the "Translation Error"? Or do you have a problem with a transformation?
Check this... https://forums.oracle.com/forums/ann.jspa?annID=330

Encrypting PDF with password. PDF command failed due to PDFlib error: Bad parameter.

I'm trying to encrypt a PDF with a password and receive this error.
~ERROR~com.adobe.document.PDFManipulation~: PDF command failed due to PDFlib error: Bad parameter.
It does not throw an exception, it just logs this error.
Anybody know how to fix this?
Version: 7.0.2
OS: Win

I was also getting this error, when trying to set usage rights on a document and then encrypt it with a password. I found a solution which works (more like a workaround, as this feels like a bug):
1. Open the unprotected file
2. Call pdfDocument.encryptWithPassword()
3. Call pdfDocument.save(), write resulting bytes to temp file
4. Reopen this file with pdfFactory.openPdfWithPassword()
5. Now you can call pdfDocument.setUsageRights() and pdfDocument.save()

Tomcat error-start up failed due to previous error

hi,
in Netbeans IDE , when i create new a web service project and deploy war file in the tomcat and when i try to run on the browser am not able to run the project. the error am getting is start up failed due to previous error.can anyone please help me out this ?????
if i deploy the default project war file its running but if i create some pages and try to run it its giving error.
regards,
Nagaraj

Read the exception/error referred by "previous error" in the appserver logs.

Get Publish failed due to network error on Publish

Similar Messages

Maybe you are looking for