Get query name by program name

Hi experts,
Someone built a query A, and generated it to program B.
Now I need update query A, but I only know program B. How to get the query name by program name?
Many thanks.

Check the page 14 in [this document>>|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40bec8da-4cd8-2910-27a9-81f5ce10676c?quicklink=index&overridelayout=true]

Similar Messages

  • Form name and Program name change

    Hi
    I have created a smartform and a driver prog & saved them in 2 requests. Now i want to change the name of both but dont want to chnage the request numbers . Please advice how can i do that.
    Thanks & Regards,
    Preeti

    Hi
    You can't rename the form name.
    So create a new form and copy the old form into the new one.
    Assign the New program and form in the NACE tcode or at some other point.
    While creating a new form , it will ask for a request assign the same old request in which old form is there.
    similarly you can rename the Program to new one and add into the same request of old program. and release the request and use
    if you want you can delete the old form name and program name from the request also.
    Reward points if useful
    Regards
    Anji

  • How to get Tcode by input Program name?

    HI all
    If I want to get  T_code name from the program.  Which  function modul should  I use?
    thanks .

    Hi,
    Just goto transaction SE80 and enter the program name, in that you will be able to see the transactions. Also you can see the transactions in table TSTC by passing the program name.
    Hope this may be useful..
    Regards,
    Prashant

  • How to find the Name of Infoset either from Query Name or Program Name

    Hi,
    I ahve got the program name from the Transaction code of the Query. I also found out the name of the Query but I could not find out the name of the "Infoset". Please help me to find out the name of the Infoset either from the Query Name or from the Program name.
    Thanks,
    Jans

    Hello Christian,
    Thank you for your reply. Actually. We have got transaction name of report and from that we found out the name of the Program and from that Program we have utilised the FM to find out the Query name. But we are unable to find the name of Infiset as we have to Download this Infoset from DEV and it is to be uploaded into QUALITY.
    But we are not sure about the Infoset.
    I could not understand your sentence "When Open it".
    Regards,
    Jans

  • Table name for 'Program name of method' and 'Method name'

    As we know, each method method contains different  program name with ext. like "====CM0001" etc., Where can I find this program name of method in database tables?
    Note: Program names are in REPOSRC with type as 'I' and name as "CLASS NAME======CMXYZ". But here we can not decide with program name belongs to which class!
    Thanks,
    Naveen.I

    Use FM SEO_CLASS_GET_METHOD_INCLUDES. Provide your class name and you will get the method names with include name.
    Regards,
    Naimesh Patel

  • How to find the corresponding job name or program name of a file

    Hi Friends,
      I am having a file name in Unix server. Is there any way I can find out which program or job it had run to give this file.
    Eg. the file name is in location /sapdaemon/DW/Out/test.dat and I want to know which program it had run to produce this file.
    Regards,
    Ramesh.

    Hi,
    Goto table TVARV and display all entries it contain. Then search for the file path. if it is present, then use this variable name and search the variable in the programs that you suspect it would have been used..
    Please reward points if useful
    Rgds,
    Harikrishna .

  • Print program name for the dunning form F150_FR_DUNN_01 in sapscript

    Hi,
          I am not getting the exact print program name for the dunning form F150_FR_DUNN_01 in sapscript. After an extensive search I have come across few names of print program like SAPF150D2 and SAPLF150. But still I am not understanding which one to use for the form and also how to use it. I am unable to understand which include I should use to write my code.
    Kindly help me.
    Thanking you.
    Pujarini Patra

    Hi,
    Yes, you should be able to assign F150_FR_DUNN_01 in Dunning Forms customizing:
    and yes, I too would absolutely try to go for either a Smartform or even a PDF Form (if i'd have all the necessary setup for them, like Adobe Document Services, in the system already). I have Basis 702 SP  0011and FINBASIS 600 SP 0021, so all the following technicalities refer to those releases:
    The corresponding SAP sample Forms are:
    - F150_DUNN_SF for Smartform; and
    - F150_DUNN_SF for pdf Form (don't let the name confuse you )
    I'm not entirely sure if it's a good idea to try to convert/migrate Sapscript to Smartform and the Smartform to PDF Form - have never done that  myself and don't know how good/usable the migration result is. I just take the interface of Smartform from SAP and do the rest from scratch or by copying over the common parts of our existing custom forms.
    There are the SAP Standard wrapper FMs for SF and PDF forms already in the System:
    - FI_PRINT_DUNNING_NOTICE_SMARTF calling PRINT_DUNNING_NOTICE_SF and
    - FI_PRINT_DUNNING_NOTICE_PDF calling PRINT_DUNNING_NOTICE_PDF.
    So, theoretically, all you had to do to replace SapScripts (or even to enable all three form types) is to assign a custom BTE Event handler FM to event 1720 (for correct Application), which could detect, what type of form is assigned in Customizing and call the corresponding wrapper FM.
    As a sample for coding PDF form wrapper call one could take FI_PSO_EVENT_00001720_PDF (if you have IS-PS) in the system. I'd take out the IS-PS specific "business logic" like posting dunning charges (if it does not apply to my solution) and add the logic to decide, which wrapper to call.
    The confusing part about the customizing (Table T047E) to me is that there seems to be no form type defined anywhere in there... just the FORNR field for form name, which should apparently take the names of all three form types... I'd  try to extend that table with custom Form type field and try to regenerate Table Maintenance dialog for  view Cluster VC_T047_F... That would save the whole effort to try to detect the type for  form assigned...
    Another tip, in case you didn't know it already: you should be able to see all the Customizing paths, where T047E is involved, when you enter table name in SM30 and press "Customizing" and then "Continue w/o Specifying Project":
    The selected entry is the one you are looking for to assing your custom forms, I believe.
    cheers
    Janis

  • What program name and table name?

    Assuming I am just a SAP user and not an ABAP programmer, how would I know the name of the program and the table/s being used by the report (like an ALV report) which I have on my screen.
    Thanks.

    Keep cursor on any filed and press F1 after that u need to press 'Technical Settings' in that window u can get Field name, Table name and Program name as well.

  • Function Builder - Message no. DS027 Program names ZX... are reserved for i

    I want to use " CALL CUSTOMER-FUNCTION '005'" within the function module IDOC_INPUT_STPPOD. But when I click on INCLUDE ZXTRKU13, I get the error message:
    "Program names ZX... are reserved for includes of exit function groups".
    What must be done in order for me to create and add my code to ZXTRKU13??
    Regards,

    No Problem Mate.
    We've very Handy tool with name as "Abuse report" it never needs to Enqueue/Dequeue before pressed.So You can use freely(Whenever needed) this for yourself also .

  • Script and program name for MM:OUTWARD CHELLAN

    Hi all ,
    can any one give me the script name and program name  for MM:OUTWARD CHELLAN.
    Regards,
    Arun.j

    Hi
    There are Std Scripts for PO,RFQ,CONTRACT, GRN , GI Note etc in MM
    What is this Outward challan? what is its' equivalent SAP business document?
    Check in The Tcode NACE for the relavent one, for the Output applications like MR,MD,EF,ME etc
    Reward points for useful Answers
    Regards
    Anji

  • Program name for the query generated using sq0102-03

    Hi Folks,
    How can we know the proggram  name for the query generated using sq01 and all?
    K.Kiran.

    Hi Kiran,
    U can get program name of nay transaction code by following this procedure
    after entering tcode it will direct u to the related screen then on the tool bar select system then go for status there u can find program name
    Rewards if helpfull
    Regards,
    Pavan

  • Caller Program name after SUBMIT or Call Tran (SAP-Query drill as ex)

    Hi ,  there is real simple situation
    I have SAP Query and do Drill Down to my Report or  Transaction.
    So I have two questions but as I believe they are equal:
    1) How I can get Caller SAP Query name from my Report ?
    2) How can we get  Caller Program name after SUBMIT or CALL TRANSACTION operator (in new started report for example )?

    Hi,
    there is a system variable sy-cprog ...check if u can use it...
    else from the caller prog move its name to SAP memory and retrive it in called prog..
    in caller prog
    data caller_prog type SYCPROG.
    move sy-repid to caller_prog.
    set parameter id 'ZCPROG' field caller_prog.
    submit <called_prog> and return.
    in called prog
    data caller_prog type SYCPROG.
    get parameter id 'ZCPROG' field caller_prog.
    write caller_prog.
    write / sy-repid.
    Cheers,
    jose.

  • How to get query name?

    Hi:
    There is a report 'AQFLINDIA_FA====Z_REGISTER====',I think it's created by Query.And how to get the 'User group' / 'Infoset' / 'Query name'?
    Thanksss.

    hi,
    they will not be stored in any table but we can identify by program name itself.
    if your program name is AQFLINDIA_FA====Z_REGISTER====  then your query name is Z_REGISTER.
    from sq01 you can get infoset name of that query and from sq02 you can get user group name.
    also check these tables.
    AQGIDOC
    AQGQDOC.

  • Bapi/Fm to get all report program names

    Hi All,
    I need a BAPI or FM to get a list of all Z report program names in the repository.
    I can do it through a select query , but it takes a lot of time and is effecting performance.
    Thanks
    Prafull

    hI  ,
    you can use table
    DATA: t_trdir TYPE STANDARD TABLE OF trdir,
          t_tstc  TYPE STANDARD TABLE OF tstc,
          s_trdir TYPE trdir.
    SELECT * FROM trdir
           INTO TABLE t_trdir
           WHERE ( name LIKE 'Z%' OR name LIKE 'Y%' )
           AND   subc = '1'.
    regards
    Deepak.

  • How to find the program name of the created sap query ?

    how to find the program name of the created sap query ?

    Hi avinash,
    Try in this way..
    Go to SE16 and then go to table TSTC.
    in that give program name as <b>*followed by your query name</b>
    (for example *TESTQUERY)
    and run , that will give progname======queryname.
    this way you can find program name.
    vijay

Maybe you are looking for