Get real/valid Novelty passports, license, id cards, visa, etc
We have years of experience producing original quality real/false passports, ID's, drivers licenses and many other identity documents, really cheap for countries such as ; Switzerland, United Kingdom, United States, Spain, Sweden, Australia, Austria, Canada,
Chile, Denmark, Ecuador, Finland, France, Germany, Israel, New Zealand, South Africa, e.t.c.
Passports with chip for the following countries are also available for : Australia, Austria, Finland, Germany, Malaysia, Netherlands, Sweden, Switzerland, Thailand, United Kingdom, United States, e.t.c.
We can also produce documents such as work permit, for UK, USA, Italy just to name a few.
You can contact us directly to get the additional information and place the order through the bellow address..
E-mail : (( [email protected]))
Team Director :(( [email protected] ))
Skype::::::::::::::::: tommy_stadler950
FAKEPASSPORTSALE.CC - Big Scam!
Guys he is mother ****** and lier..He had scammed many people and changing his site in every two months... so don't beleive him and real fact of life today he ripped off you in 1100 euro and tommorow sumbudy will ripp off him in 22oo euros. and others defect of scamming he will be caught in disease, Poverty etc...I hope after scammed many people he or his anyone family member caught this types disease like cancer, heart patient, blood cancer etc... so lethim scam to other and sustain its results...
Edited by: user13274852 on 14.07.2010 8:41
Similar Messages
-
Purchase Real and Novelty Passports,id cards,visas,drivers license ,Permits for all countries
Purchase Real and Novelty Passports,id cards,visas,drivers license ,Permits for all countries
Are you trying to change your nationality ? do you need work papers ? do you want travel ? do you need papers you cant have ?if yes , then you are in the right place at the right time
We are an independent group of specialized IT professionals and data base technicians who are specialized in the production of quality documents such as passports,drivers license,id cards,stamps,visas,diplomes of very high quality and other products
for all countries: USA, Australia,UK, Belgium, Brazil, Canada, Italian, Finland, France, Germany, Israel, Mexico, Netherlands, South Africa, Spain, Switzerland, . This list is not full.contact General support: [email protected]
To get the additional information and place the order just call or contact us via email mobile.
Contact; [email protected]
Phone: 00237-9121-1360
Phone: +237-7397-1112
Key words
Canada
Cards
United States Cards
Student Cards
International Cards
Private Cards
Adoption Certificates
Baptism Certificates
Birth Certificates
Death Certificates
Divorce Certificates
Marriage Certificates
Custom Certificates
High School Diplomas
G.E.D. Diplomas
Home School Diplomas
College Degrees
University Degrees
Trade Skill Certificates
Social Security
Validate SSN Number
Driver License Search
Spy Products
Voice Changers
Listening Devices
Invisible Ink
DMV Record Inquiry
Background Check
Investigate Anyone
Contact; [email protected]
Phone: 00237-9121-1360
Phone; +237-7397-1112If you want to buy high quality fake faked forged fraudulent counterfeit duplicate false camouflage diplomatic passports and other identification documents of Australia, Austria, Belgium, Canada, Finland, France, Germany, Israel, Malaysia, Netherlands, New Zealand, South Africa, Switzerland, United Kingdom, United States and some other countries please visit this website:
http://www.FakePassports.EU
E-mail: [email protected]
Diplomatic passports are also available on demand. -
I am trying to update my credit card info - no longer using credit card and trying to put in a debit card and it wont accept?????
You are probably entering your Visa's security code incorrectly. Here's how to find it:
http://support.apple.com/kb/HT3541 -
Trying to edit my payment info. I keep getting the message that my number is not valid for the type of card I have selected. I have a VISA card. I have typed in the number 4 times, but same message pops up.
Thoughts?You are probably entering your Visa's security code incorrectly. Here's how to find it:
http://support.apple.com/kb/HT3541 -
Getting real audio into gb2... using my sound card?
hello,
Ok. I have my garageband2 going and i pretty much have got the hang of making music using virtual and real instruments. I just don't know how to get Real REAl sound (such as my vocals) into it. my g4 has no mic imput but I have a didgidesign 01 sound card that i would want to use.
where to start?Try going into your utilities folder and look for Audio/Midi setup utility. This may be where you would set the soundcard as your input.
-
Problem: I just get a validation screen endlessly coming up when trying to open cc apps - pls help!
I can't open any adobe cc products - I just get a validation screen endlessly coming up.
Tride technical help, but they couldn't help, tried all this but no use:
Sanjay kumar: Hello. Welcome to Adobe Technical Support.
Sanjay kumar: Hi Emma!
Emma Batley: please can you help - I can't open any adobe cc products - I just get a validation screen endlessly coming up
Sanjay kumar: I understand that you are unable to launch any of the applications because it stucks at Validation screen, is thiis correct?
Emma Batley: Yes
Sanjay kumar: We are really sorry about that.
Sanjay kumar: Thank you for confirming.,
Sanjay kumar: I will be glad to check and assist you,
Sanjay kumar: May I please know if the applications was working fine before?
Emma Batley: Yes, until a day or so ago - since then I've uninstalled & reinstalled, but no use.
Sanjay kumar: Thank you for confirming.
Sanjay kumar: Could you please let me know once you re-installed the applications aren't open?
Emma Batley: at one point I even got a window saying "Your trial has expired" but I am a cc member...
Sanjay kumar: Thank you for confirming.,
Emma Batley: The apps do not open at all
Sanjay kumar: Emma, please try to launch any of the Creative Cloud application and let me know when you see Trial Expired page,
Emma Batley: Just window open/closing saying Validating licence
Emma Batley: I have to quit Adobe Installation Manager to stop it
Sanjay kumar: Thank you for confirming.
Sanjay kumar: May I please know if you are in corporate (office) network?
Emma Batley: no, at home
Sanjay kumar: Thank you.
Sanjay kumar: Please follow below instructions to check on this
Sanjay kumar: Please open Finder, then click on Go > Go To Folder
Sanjay kumar: Then type /etc
Sanjay kumar: Let me know once you are in ETC folder.
Emma Batley: /etc now
Sanjay kumar: Please open Hosts file and let me know.
Emma Batley: this is what it says:
Emma Batley:
Emma Batley: ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost
Sanjay kumar: Thank you.
Emma Batley: ok, what next?
Sanjay kumar: The Host file is correct.
Sanjay kumar: Please allow me a moment.
Emma Batley: ok, i'll wait
Sanjay kumar: Thank you for staying online.
Sanjay kumar: May I know do you have the Creative Cloud Desktop Application installed in the computer?
Emma Batley: yes
Sanjay kumar: Okay. Please launch the Creative Cloud Desktop Application .
Emma Batley: ok, it's open
Sanjay kumar: Please sign in and let me know
Emma Batley: I have been signed in
Sanjay kumar: Thank you.
Sanjay kumar: Please click on Gear Icon and sleect "Preferences"
Sanjay kumar: Then under "Preferences", window click on Account and click on Sign out
Sanjay kumar: Let me know once you signed out of Creative Cloud Desktop.
Emma Batley: I've signed out
Sanjay kumar: Thank you
Sanjay kumar: Please sign in back using your Adobe ID:
Emma Batley: ok, i've done that
Sanjay kumar: Thank you
Sanjay kumar: Now please try to launch Creative Cloud application such as Photoshop and let me know if it is working.
Emma Batley: no, like said I just get a window saying Validating Software Licence opening & closing endlessly until I quit Application Manager
Sanjay kumar: Thank you for confirming.
Sanjay kumar: Please click on Apple Icon and select "System Preferences"
Sanjay kumar: Under "System Preferences", please click on Network
Emma Batley: ok, done
Sanjay kumar: Under Network, click on Advanced and then in the next window click on Proxies
Sanjay kumar: Please check if any of the options are checked.
Sanjay kumar: May I please know the status?
Emma Batley: just at the bottom Use Passive FTP Mode and this: *.local, 169.254/16 under Bypass proxy settings
Emma Batley: nothing ticked in box "Select a protocol..."
Sanjay kumar: Please uncheck "Use Passive FTP Mode"
Sanjay kumar: Let me know once you are done with this.
Emma Batley: done
Sanjay kumar: Thank you.
Sanjay kumar: Now please try to launch any of the Creative Cloud application such as Photoshop and let me know if it is working fine.,
Emma Batley: No, same as before
Sanjay kumar: Thank you for confirming.
Sanjay kumar: Is it says as Validating Software License and remains in same window?
Emma Batley: the window opens/shuts/opens/shuts etc
Sanjay kumar: Thank you for confirming.
Sanjay kumar: I wish I could help you with that issue but we (chat support) handles issues with Installation, Download and first Launch of the Adobe products CS6 and CC version.
Sanjay kumar: In this case, you need to contact to our product specialist team, via phone they will be able to help you better.
Sanjay kumar: Please give me a moment while I provide you the phone number for further assistance. 3
Sanjay kumar: Here is the link to get the contact number:http://www.adobe.com/uk/aboutadobe/contact.htmlHi Emma,
Did you manage to find a solution for this? We are in NZ and having the same issue across out network of agency computers... Our IT supports answer is to overhaul the machines (at a huge cost!) but we're not even sure this is going to work... a bit ridiculous that you pay for a product you can't use properly and then have to pay for someone to fix it, which even then, might not work!
If you haven't found a solution, we did find a way around the vaildation for Photoshop, Indesign, Illustrator and Bridge. At the validation screen if you click on the text to sign in as another user, it takes you to another screen. Resign in as the same user (yourself) and then it should let you access these programmes. Although you have to do it everytime you open it. Unfortunately we can't get it to work at all for Acrobat, it lasts about 2 seconds and then automatically quits.
Cheers,
Alaina -
I create an itunes store account to conect my appletv
But says isnt valid
I dont have credit card
I jus want to start using my appletvYou don't need to set up iTS account for Apple TV, unless you rant to watch movies at iTS's rip-off prices. I suggest just get a cheap subscription to Netflix instead.
If you insist, check with iTS.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
How to get Windows Server 2012 trial license key?
How to get Windows Server 2012 trial license key? I'm trying to install WinServer 2012 Trial on a VMWare Workstation 9. I'm asked for the product key during set up. If I ignore putting in the key (since I don't have one) The install fails stating no valid
key. I tried this with Oracle's Virtual Box and the same thing happens. I tried using Majic JellyBean to find the key, but that only works on pre-installed OS. A Technet article said to use aaaa-bbbbb-ccccc-ddddd etc. in the spaces. That doesn't work either.
Articles all over the web seem to have other people in the same boat. Please help :)Download the trial version from here -
http://www.microsoft.com/en-us/server-cloud/evaluate/trial-software.aspx It does not require a key. If the software is asking for a key, it is not the trial copy. Where did you get your copy?
.:|:.:|:. tim -
11gr2 Dataguard Active Standby - Unable to get Real-Time apply working
As above, I am unable to get real time apply to work WITHOUT it switching my standby back to MOUNT state. There does not seem to be anyting obvious from the broker, or alert logs.
On the Standby:
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database open read only;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
READ ONLY
SQL> alter database recover managed standby database using current logfile disconnect;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
MOUNTED
Primary:-
SQL> SELECT status, recovery_mode FROM v$archive_dest_status where dest_name = 'LOG_ARCHIVE_DEST_2';
STATUS RECOVERY_MODE
VALID MANAGED REAL TIME APPLY
Edited by: Imran on Apr 17, 2012 10:56 PMHello;
This is expected.
Works the same exact way on my system. How Redo Data is applied is set when the database is MOUNTED.
See - 6 Redo Apply Services
Data Guard Concepts and Administration 11g Release 2 (11.2) E10700-0
The document is vague on this at best, but think about the error you get if you try to start apply twice.
Data Guard Real-Time Apply FAQ [ID 828274.1]
Best Regards
mseberg
Edited by: mseberg on Apr 17, 2012 10:04 AM
h1. Test
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database open read only;
Database altered.
SQL> alter database recover managed standby database using current logfile disconnect;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
READ ONLY WITH APPLY
SQL> So I get different results ??
Edited by: mseberg on Apr 17, 2012 10:40 AM
h2. Still more
I would like to change my answer. Based on my test and queries as shown below I believe REAL TIME apply is working. Note the last log says NO because its in progress.
Checking last sequence in v$archived_log
STANDBY SEQUENCE# APPLIED COMPLETIO
STANDBY 343 YES 16-APR-12
STANDBY 344 YES 16-APR-12
STANDBY 345 YES 16-APR-12
STANDBY 346 YES 16-APR-12
STANDBY 347 YES 17-APR-12
STANDBY 348 NO 17-APR-12
6 rows selected.
----------------Last log on Primary--------------------------------------|
MAX(SEQUENCE#)
348
1 row selected.Yes, I doubled check and it works on mine. I guess I read what I wanted to read.
All my Standby redo are setup correctly ( size and numbers )
READ ONLY WITH APPLYYour answer my be the Uwe answer at the end of this thread :
Enabling the Active Dataguard and Real Time Apply
Best Regards
mseberg
Edited by: mseberg on Apr 17, 2012 10:50 AM -
I restored my I phone 4 using Itunes, after that I can't access the icon any more I only got a message that says " ( Sim not Valid.) Only compatible SIM cards from supported carrier may be used to activate iphone. I need some proffesional help. Thanks
"We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care, Sim not vaild?"
99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked. -
I've been trying to make an account with iTunes n everytime I get to the part of the credit card that's as far as I get because I dnt have one, how can I make an iTunes account without a credit card??
Where are you located?
Just go and buy an iTunes gift card at any store in your country.
Then follow all the steps you did, but when it asks you for the credit card number, there shoujld be a GIFT CARD option which will let you load your account witht eh funds form the gift card without providing a credit/debit card #. -
Getting schema validation working in Eclipse with Coherence 3.7.1.0
Just wondered if anyone had got schema validation to work in Eclipse (3.5 - Galileo) for Coherence 3.7.1.0?
The Coherence developer docs show that you should add sections like this:
<pof-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://xmlns.oracle.com/coherence/coherence-pof-config"
xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-pof-config
coherence-pof-config.xsd">
However, if I use that "shortened" form (for cache, pof, etc. configs) Eclipse gives a warning "No grammar constraints (DTD or XML schema) detected for the document." and the schema validation fails to work (i.e. no "auto pop-ups" when entering content, and rubbish content is gladly accepted.)
In Coherence 3.7.0, I'd used the following "extended" form (note the longer "schemaLocation") to get things working correctly:
<pof-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://xmlns.oracle.com/coherence/coherence-pof-config"
xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-pof-config
http://xmlns.oracle.com/coherence/coherence-pof-config/1.0/coherence-pof-config.xsd">
Also note that entering the "http://xmlns.oracle.com/coherence/coherence-pof-config/1.0/coherence-pof-config.xsd" in a web browser opens the xsd, as you'd expect.
Now...
I'm looking at the PofAnnotationSerializer in 3.7.1.0 and the "auto indexing" option. The declaration in my pof file for it fails as the "class" (or fully-qualified java.lang.Class version) in the "init-params" section isn't valid. If I look at the xsd on the url above, this is indeed the case, that option does not appear.
However, if I look at the POF xsd in the coherence.jar file for 3.7.1.0, the "class" option has been added, and has a newer 'version="1.1"' added to it's schema declaration. So I therefore tried to point my "extended" declaration to point to " http://xmlns.oracle.com/coherence/coherence-pof-config/1.1/coherence-pof-config.xsd", in order to get schema validation to work in Eclipse with this new schema. Unfortunately that url doesn't exist - you get a "Content Server Request Failed" error.
So, I guess my question is, is there a way to get myself pointed at the 1.1 versions of the xsd's so I can have schema validation working in Ecliipse? Or is there another workaround (did a bit of Googling, but that mainly seemed to be people switching validation off to simply get rid of the error...)
Cheers,
SteveCheers, Dave.
I had in fact had a try at extracting the xsd and pointing to it directly, and that did indeed work (had to do this following the same steps shown below using an "entry" in the XML Catalog.)
I had a look around at some of the other "entries" in Eclipse by default and noticed that they actually refer to xsd's directly within the jars, hence saving the extraction step and keeping screw-ups down to a minimum; a bit of playing around to get the syntax right and I finally managed to get it working.
For those who are interested (NB. my Coherence 3.7.1.0 install is in a directory "c:\coherence3.7"), the steps are:
In Eclipse, Go to Window->Preferences->XML->XML Catalog. Then create a "User Specified Entry".
In the "Location", add (without the quotes): "jar:file:/C:/coherence3.7/coherence/lib/coherence.jar!/coherence-pof-config.xsd"
In the "Key Type", add (without the quotes): "Namespace Name"
In the "Key", add (without the quotes): "http://xmlns.oracle.com/coherence/coherence-pof-config"
The schema validation now works fine. Eclipse shows no warnings/errors, and the auto-complete and validation are fully functional.
Still, it would be nice to get the "1.1" urls updated to point to the schemas on the Oracle site, to avoid all our developers from having to make these changes (and of course avoid them pointing at an older, out-of-date local install of coherence.)
Cheers,
Steve -
How to get real value from selectOneChoice with javascript?
Hi,
How to get real value from selectOneChoice with javascript? The event.getNewValue() only gets me the index of the selected item, not the value/title.
JSF page:
<af:resource type="javascript">
function parseAddress(event)
alert("new value: " + event.getNewValue());
</af:resource>
<af:selectOneChoice label="Location:" value="" id="soc4">
<af:clientListener type="valueChange" method="parseAddress" />
<f:selectItems value="#{Person.locations}" id="si7"/>
</af:selectOneChoice>
HTML :
<option title="225 Broadway, New York, NY-10007" selected="" value="0">225 Broadway (Central Office)</option>
<option title="90 Mark St., New York, NY-10007" value="1">90 Mark St. (Central Office)</option>
Thanks a lot.Something I was missing ,
You need to add valuePassThru="true" in your <af:selectOneChoice component. I have personally tested it and got the actual value in alert box. I hope this time you got the real solution. You can also test the following code by your end.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:form id="f1">
<af:panelBox text="PanelBox1" id="pb1">
<af:selectOneChoice label="Set Log Level" id="soc1"
value="#{SelectManagedBean.loggerDefault}"
valuePassThru="true">
<af:selectItem label="select one" value="First" id="s6"/>
<af:selectItem label="select two" value="Second" id="s56"/>
<af:clientListener method="setLogLevel" type="valueChange"/>
</af:selectOneChoice>
<af:resource type="javascript">
function setLogLevel(evt) {
var selectOneChoice = evt.getSource();
var logLevel = selectOneChoice.getSubmittedValue();
// var logLevelObject = AdfLogger.NONE;
alert("new value is : " + logLevel);
//alert(evt.getSelection);
//alert(logLevelObject);
evt.cancel();
</af:resource>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root> -
I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid response from the device. How can I get the system to recognize the phone, and let me rename it as my iPod, instead of my phone?
As an aside, the current installed operating system on this old iPhone is 4.2.1, but that wasn't one of the selectable options in the operating system list dropdown below. Don't know if that makes any difference.Hi maddogdne,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Using an iPhone without a wireless service plan
http://support.apple.com/kb/ht3406
Cheers,
- Judy -
I cannot get onto iTunes to remove a credit card, so how do I do it from my iPod Touch?
I cannot get onto iTunes to remove a credit card, so how do I do it from my iPod Touch?
Go to Settings>Store>Apple ID>View Apple ID>Edit Payment information
Maybe you are looking for
-
"Find Finder Items" returns same file twice
Hey y'all, I'm trying to jerry-rig a photobooth for my wedding. I'm using automator to grab 3 stills from a webcam, and place them all in a folder. When I use "Find Finder Items" to send these images to an action that will rotate them, it finds one o
-
I have had two of these cards fail. The second has failed after less than 7 months of use. I can replace it with another (at $800) or maybe consider an ATI Radeon HD5870. Any one have suggestions or advice. My main use in with Aperture 3.1
-
Can't find a playlist I created on my playlist or computer? I didn't delete it. I don't want to create it again because it took a long time. please help me find and recover.
-
Intermitent Eject symbol by Network icon in Finder pane
Please can anyone tell me why sometimes (and only sometimes) I get an eject symbol next to the network icon in the left pane of Finder windows? Pressing it does nothing. I wouldn't say I connect to a network but maybe I do and misunderstand the termi
-
Lost all my iWork 08 auto-correction data - is it still hidden somewhere?
Having spent a year or more adding my custom auto-correction list to Pages 08, I upgraded to iWork 09 and deleted 08 - only then realising that the auto-correction data didn't come across (which is a bit daft iWork Team!) Is there a way of getting it