Get Report of Terminal Server license report

Is there a way I can track our Terminal Server Licenses usage. For example I have bought 50 licenses, are they being used to full capacity or under used. What is the monthly maximum usage. And we have about 10 servers hosting terminal services
in our AD, do I have to generated a report for each ? Is there tool that can do this ? Windows 2008 R2 and Windows 2012 R2

Hi,
Thank you for posting in Windows Server Forum.
For finding active session on terminal server you can use command as follow.
query session /server:SERVER2
A user can always query the session to which the user is currently logged on. To query other sessions, the user must have Query Information access permission.
More information.
Query session
http://technet.microsoft.com/en-us/library/bb490800.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

Move Terminal server licenses to another server

We have one terminal server VM hosted in hyper v server. currently there is a problem with the hyper v server hdd and we might need to rebuild the whole server. We would like to setup a new terminal server on a new server. The existing terminal server is
windows server 2003. After I fresh setup the Windows server 2003 VM in a new server, how do I move the terminal server license to a new server? FYI, we would like to decommission the old terminal server. But we would like to do it in parallel as there are
many users are still accessing to the old terminal server.
Thanks so much.
Regards,
Henry

Hi Henry,
First you need to gather your licensing paperwork, authorization number(s), license number(s), etc. for your existing licenses. This step is critical.
Next install RD Licensing on the replacement 2003 server, Activate it using Terminal Server Licensing (licmgr.exe), then install the TS CALs. If you receive an error when installing the old TS CALs please contact the Clearinghouse and explain
to them you need to install the TS CALs on a new server because the old one is being decommissioned.
How to locate a telephone number for the Microsoft Clearinghouse
http://support.microsoft.com/kb/291795
Once you have confirmed that the old TS CALs are installed on the replacement 2003 TS then make sure your 2003 TS is set to the correct Licensing mode (to match the type of TS CALs) and you have Specified the name of the new RD Licensing server.
You do this in Terminal Services Configuration (tscc.msc) on the replacement terminal server.
As an alternative you could install the existing TS CALs on a newer RD Licensing server such as Server 2008 R2, Server 2012, etc. You still will need to have the authorization number(s), license number(s), etc. for the existing 2003 TS CALs.
How to move Terminal Services CALs from one license server to another in Windows 2000, Windows Server 2003 and Windows Server 2008
http://support.microsoft.com/kb/953918
-TP

Windows Terminal Server Licensing Mode

Hi all.
Anybody knows how to license a Windows Terminal Server to be used only throught SGD?. I have more than 100 users behind a SGD, and I want to export Windows applications to them.
I know that there are to kinds of Windows Terminal Server licenses. Users or Devices CAL's. If I'm using SGD, do i need a license for each users, or with one license for each SGD server is enought?.
Thanks.

Hi.
It's not Oracle limitation or rules. It's rules of Microsoft.
http://tonymackelworth.wordpress.com/tag/multiplexing/
http://download.microsoft.com/download/8/7/3/8733d036-92b0-4cb8-8912-3b6ab966b8b2/multiplexing.pdf
"You may deploy network architectures that use hardware or software to reduce the number of devices or users that directly access the software on a server. This is referred to as multiplexing or pooling. However, this does not reduce the number of CALs required to access or use the server software. A CAL is required for each device or user that is connected to the multiplexing or pooling software or hardware front end."
Regards.

Viewing report on Terminal Server

Post Author: Jerry H
CA Forum: .NET
I've written a VB.NET 2005 application which uses the CrystalReportViewer object and it's been deployed to a Terminal Server. When the report is previewed, some of the data is missing and some of my textobjects are not appearing. When I connect my notebook to the network and open the report with CR XI R2, everything appears fine. The report was designed in CR XI R2...is there a compatibility issue with XI reports and the Crystal Reports for .NET framework 2.0?

Hi Hans,
Do they even support that configuration? They really should help you determine what the problem is.
CR 11 I don't believe supported Terminal Server but typically the work around is to copy all of the runtime into the users system32 folder. It makes a mess but it's the easiest way to get it to work.
You can use tools called Process Monitor from www.sysinternals.com ( Microsoft now ) and follow the process. It's likely a permission issues since the report works. The error itself doesn't tell us much, it may be an older database driver problem or missing dependency etc.
CR XI R2 ( 11.5 ) does support it so you could suggest they upgrade, it is free: Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Thank you
Don

Windows Terminal server is reporting error" ESE error -1003 JET_errInvalidParameter, Invalid API parameter."

We are getting event error as copied below on Terminal server. Any help in getting this issue resolved will be much appreciated. Server is running on windows 2008 R2 server.
Log: System
Type: Error
Event: 44
Event Time: 08:33:47 PM 23-Apr-2015
Source: TerminalServices-Licensing
Category: None
Username: N/A
Computer: ABC-HG-SRV11.biz.com
Description: The following general database error has occurred: "ESE error -1003 JET_errInvalidParameter, Invalid API parameter.

Hi Keshava,
Firstly, please fully patch the system.
If the issue persists, I suggest you perform following actions to solve the issue:
Assign the appropriate permissions to the TS Licensing database folder on the Terminal Services license server.
Reinstall the Terminal Services client access licenses (TS CALs) onto the license server.
For more detailed steps, please refer to this article below:
Event ID 44 — Terminal Services License Server Database Availability
https://technet.microsoft.com/en-us/library/cc727345%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Running adobe acrobat on a terminal server & licensing purchase

Is it possible to run both the standard and professional versions of adobe acrobat (1 license of each) on a terminal server? Each version would be security locked down to the specific licensed user.
Also
If you purchase adobe acrobat through licensing is it possible to purchase just one license or is there a minimum number of licenses that you can purchase? Is the better option for one license to purchase the boxed retail product?

You have a better chance to get a helpful reply if you ask in the Acrobat forum, or even at http://forums.adobe.com/community/licensing

How to query the terminal Server Licensing grace period

Hi,everyone
A few day ago, i installed a windows 2K8 R2 as a terminal server ,and specify itself as a terminal licensing server ,but without install any CALs.So erevytime i logged into the terminal , system will pop up a message said that the terminal
server's grace period will expired at xxx days. but due to someone unchecked the message , systme can't pop up any message talked about the grace period.
So can anyone tell me where can i find the remaining grace period ??
Jacky_Deng

Hi,
You can retrieve the number of days remaining in the grace period via WMI. Instructions below:
Logon to your server as an administrator
Start--All Programs--Accessories--Right-Click on Command Prompt and choose
Run as Administrator
Enter the following command:
wmic /namespace:\\root\CIMV2\TerminalServices PATH Win32_TerminalServiceSetting WHERE (__CLASS !="") CALL GetGracePeriodDays
-TP

Terminal Server Licensing 2003 to 2012 mixed environment - issue

We have 1 2003 Terminal Server and 1 2012 RDSH. We recently
migrated 2003 Terminal License Server to new 2012 RD Licensing Server.
On 2012 RD Licensing Server we have been instaled 20 - 2012 RDS Per Device Cal and 20 - 2003 TS Per Device Cal.
I sometimes works on Terminal
Server 2003 or 2012. And here is a problem with issued Terminal license for Device. When I Logoff from
2003 TS and then I log in to 2012 RDS - the 2012 RD Licensing Server issued new license for my computer on this same name. When I do the same in the reverse order - the 2012
RD Licensing Server issued next new license for my computer. I do this several times and now I have 10 permanent 2012 RDS license issued for this same computer with this same name, and 5 temporary 2012 RDS license issued for this same computer and 1 temporary
2003 TS for this same computer.
I have no idea how resolve this problem.
Thanks in advance for any help anyone can provide.
Lukas

Hi,
I probably tested everything.
- reinstalling license server
- reactivate license server
http://technet.microsoft.com/en-us/library/cc739075(WS.10).aspx
http://support.microsoft.com/default.aspx?scid=kb;EN-US;983385
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ca458045-fb99-4c63-ad55-b738f2d5f49d/ts-license-manager-problem
And still I have the same problem.
From my Event Viewer:
Log Name: System
Source: Microsoft-Windows-TerminalServices-Licensing
Date:
Event ID: 42
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
An error occurred in policy module "Policy Module for company Microsoft Corporation product A02 has denied new license request with error code 14.
I searched for everywhere to solving this problem. Without positive results :(
Please help!

Terminal Server Licensing Problems with GPO Security Group License Server

Hello,
I have two fresh installs of W2K12R2.
One is RD Session Host and the other one is the License Server. Everything is fine until I active the GPO Security Group License Server. After that the License Server gives no licenses
to die clients (we have User und Device CALs). TS Licensing Diagnostic’s shows no errors, the number of available licenses is displayed correctly, even the state of GPO Security Group License Server is correctly shown as "active" and die
Membership in the Group "RDS-Endpointserver" is "Yes". Eventlog shows no Errors. Log in on the session host is even possible, maybe because the RDS-Service is in evaluation time.
If the GPO Security Group License Server is disabled again, the server starts to serve licenses as expected.
I don’t know what I can do anymore, never had problems with exact the same setup under W2K8, but with W2K12 is the second time I notice this issue.
Thanks for your ideas,
Andreas

Hi Andreas,
Thank you for posting in Windows Server Forum.
Sorry to inform but there is no official document for server 2012 related to this event, you can go through below article for reference.
You cannot use a security group to add computer accounts to the Terminal Server Computers group. You must add each computer account explicitly. To verify whether an RD Session Host server is allowed to request RDS CALs from the Remote Desktop license server,
you can use the IsSecureAccessAllowed method of Win32_TSLicenseServer class. For more details about this method, click here.
1. License Diagnosis tool returns error "License server <computer name> cannot issue RDS CALs to the Remote Desktop Session Host Server because the 'License server security group' Group
Policy setting is enabled."
2.Control the Issuance of RDS CALs
Note: You should only enable this policy setting when the license server is a member of a domain. You can only add computer accounts for RD Session Host servers to the RDS Endpoint Servers group when the license server is a member of a domain.
Hope it helps!
Thanks,
Dharmesh

Office 2013 terminal server licensing

We need to install Office 2013 Pro+ on a MS terminal server. I've been reading around and have determined we need a volume license copy of O2013 and enough licenses for the number of desktops accessing it. Just a couple of questions...
Does O2013 have to be installed on the client desktop? If not, how does one install the license without installing O2013?
I have a user on a desktop in the office with O2013 installed and licensed. This user goes home and connects to the office network/terminal server using their home PC over a VPN. Do we need 2 licenses for this one user, one for the work PC and
one for the user's home PC?
Thanks!

This article, and the linked PDF "Licensing brief", should help:
http://www.microsoft.com/licensing/about-licensing/briefs/remote-desktop-services.aspx
Office does not have to be installed on a client desktop - even if you assign a license to that desktop just for the purpose of entitling Office-via-RDS at that desktop. E.g. if you used thin-clients or Linux instead of "full desktop Windows",
you can't install Office there, but if the device is used for Office-via-RDS, you must assign an Office license to that device.
You don't "install the license" - you assign a license (which is simply keeping records that you have "allocated" a license).
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Terminal Server Licensing doesn't assign user licence

Hi,
We've Windows Server 2008 R2 as Terminal Licensing Server, without Remote Desktop Session Host server on the network. Licensing server is member of domain and SRDLS configuration says everything green.
On Licensing Server I can see a lot of Added licences (column "Total licences") but for all of them there is 0 Issued, and a lot of clients are using RDS service. There is no any specific Terminal event logs.
How I can start troubleshooting this issue?
Potential ideas:
- how can I check if Terminal CALs are activated?
- how can I check if my clients are using that wanted Terminal License server?

Hi,
Reports are empty, there is no any user listed in report.
Issued licences (in TS Licensing console) says 0, even Total liceses is listed in two groups with X and Y licences.
What do you suggest for next step?
Thnx

"SQL Server 2008 Reporting Services does not support map report items"

Hi,
I am trying some new feature that are introduced in SQL Server 2008 R2 version. While I try to use "Map" control within it, it threw the following error:-
"Error 1 The map, Map1, was removed from the report. SQL Server 2008 Reporting Services does not support map report items. "
-Also, similar kind of error I am getting for "Indicator" control.

Hi Tej,
I think you get this error message when you are deploying a report to report server using BIDS, correct? If not, please provide more details on your scenario :-)
If I guessed correctly, then this message is a result of trying to deploy a map report (a SSRS 2008 R2 feature) to a non-R2 2008 report server. When deploying a report of RDL2010 format to a non-R2 report server, BIDS will downgrade the file to RDL2008 format, so that the non-R2 report server can process it. Any report elements using features not supported in RDL2008 will be dropped during this downgrade process.
BIDS gets the server version from a report project property called TargetServerVersion:
http://technet.microsoft.com/en-us/library/ee635898(SQL.105).aspx
If your report server is indeed the 2008 R2 version, then the TargetServerVersion property should be set to "SQL Server 2008 R2 Reporting Services." The project property page also has a "Auto Detect..." option if you are uncertain about the version of your report server.
Hope this helps!
Cheers,
LawrenceThis posting is provided "AS IS" with no warranties, and confers no rights.

Sql server 2012 reports

If i develope reports using SQL server 2012 reporting services, can i upload the reports on SQL server 2005 report server and SQL server 2008 Report server ??
h2007

Generally
higher to lower deployment is not supported.
Try to change the properties of the ReportServer Project in Visual Studio and set the target server version as mentioned in below thread.
http://stackoverflow.com/questions/13798289/reporting-services-built-in-2012-deploy-in-2008
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Run XML Publisher Report via URL (like Oracle Reports)

Hi All,
Is it possible to run xml-publisher report via URL?
In Oracle Reports works this fine:
http://test:7777/reports/rwservlet?server=test_bihome1&report=test1.rdf&userid=test/testv@db&desformat=pdf&destype=cache
We need this for public reports without user login.
Thanks
Thomas

Thomas,
I was waiting to get home before Tim replied... He got the better of me this time :-)
You say you want to let your users run reports using XMLP just by clicking on an URL same way you do with reports and without having to login. If I got the question right and assuming that:
1.Your company is not overly concerned on who runs what reports
2.Who sees what data
3.Your XMLP installation is on your intranet and firewalled from the outside
What you can do is:
On the main page of your XMLP Enterprise installation you should see a folder called "Guest". Any report you create under this folder is run as user "guest" which means you don't have to authenticate yourself as you would normally do.
I have tested this on my home server and this is what I've done:
1.Logged in as admin or any other user you've created with admin privileges created a report under the "Guest" folder.
2.Copied the URL, on my server it is "http://samba.private.net:15101/xmlpserver/Guest/People/People.xdo"
4.Logged off as admin and pasted the URL to a new browser window
5.Hit return and Voila, my report runs without the need to login to XMLP.
Hope this helps. Let us know how you got on.
Cheers,
Joao
PS: If you want to see the report for yourself here's the URL from the outside: http://medeiros.homelinux.net:15101/xmlpserver/Guest/People/People.xdo
I'll keep the link alive for a couple of days.

Running Forms on oracle Application 10g(9.0.4) on terminal Server

oracle application Server Installation guide for windows states that
Oracle Application Server is not supported on Windows operating systems that
include Terminal Services (for example, Windows NT Terminal Server Edition and
Windows 2000 with Terminal Services are not supported).
My Remarks : It means Oracle Application server cannot be installed on the Windows server on which Windows Terminal Services are on.
Please consider the following deployment scenario
Server 1
OS : Windows 2000
Software Installed : Oracle Database 10g
Server 2
OS : Windows 2000
Software Installed : Oracle Application Server 10g(9.0.4) on which Forms and Reports are deployed
Server 3
OS : Windows 2000 as Terminal Server
Software Installed : IE 6.0 , that will act as Client Machine.
I have following Queries
1. Oracle does not allow OAS installed on Terminal Server, will it allow Terminal Server( Server 3) to act as Client and to run web base forms and reports on it.
2.
In case It allow to run forms and reports on Terminal Server ( Server 3) does it means thin client machines connected to Terminal Sever can access Forms and Reports.
Thanks and Regards,
Ankur Diwan

The bottom line is that we don't certify running Forms using the features of a terminal server to serve up any part of those Forms. That doesn't mean it does not work, but its not certified or supported.
Regards
Grant Ronald
Oracle Product Management

Get Report of Terminal Server license report

Similar Messages

Maybe you are looking for