Get report on ingress and egress ipsec traffic size per session

Hi,
I am looking for advice on how to best get the ingress and egress byte counts per VPN session. I have a netflow appliance which gives me aggregated data, but I am looking for the best way to get byte size in and out per session. I am using VPN on a Cisco IOS router (2811).
Thanks.

by the way there is simultaneously no B2B credits deficit on the corresponding fc port and no drops on it observed.

Similar Messages

How to get report Server Name and Environment ID in Report

How to print report Server Name and Environment ID in Report 10G.(Through in package or others)
I'm also using Oracle Application Server 10G.

Hi,
Server and envid are the parameters passed along with Reports URL call.
These variables value can be traped in Report by defining SERVER , ENVID named user parameters.
Once trapped, can be printed on Report.
Just ensure that these users parameters are not exposed to Parameter page, otherwise user may end up changing it.
Thanks

Get report server name and port name

J want to know if it is possibile to obtain from a form the name of the report server and the port on work.
Infact if i use two different application server the nae of the report server change and in the script that call the report server is necesseraly using the name of the report server.
Thank's

if your cases are that the dev, test, production servers have different servers and databases, then you may create a table e.g., report_server_profiles(serv_name varchar2(100),ports number), it contains one record ONLY in each server's database, then in your form code only have same code that works for three of them.
If you have two report servers, but have one database, then you may add a flag column in above table and depends on users group to set that report flag.

Would Like to Get Report of Daily Emails In and Out from Members to a DL Exchange version : 2007 I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity is it possible ?

Would Like to Get Report of Daily Emails In and Out from Members to a DL
Exchange version : 2007
I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity
is it possible ?

Well, distribution groups don't really have a concept of "in" or "out". They only serve to distribute messages sent to them -- unless you're asking to know who was a member of the distribution group at the time a message was sent to the DL.
Message tracking logs hold the information you want, though. You'd have to look for EXPAND events that reference the distribution group and take the sender's e-mail address from that event. If the DL is a simple one that's not a member of any other groups
you could also look for RECEIVE events sent to the e-mail address of the group and get the sender's name from that event.
You can use Powershell extract the rows of data from the logs, but you'll have to write the code to get the data out of those rows and into a format you want. Perhaps LogParser could be useful in place of Powershell?
--- Rich Matheisen MCSE&I, Exchange MVP

Question on "Get Reporting Statistic" and If statement issue

Hello
I worked up a "Get Reporting Statistic" in my script that looks for agents that are in the Not Ready state.
Report Object:    CSQ IPCC Express
Field:     Not Ready Resources
Row Identifier:    Queue_Name
Result Statistic:    Not_Ready_Resources
I have an If then statement:
If(Not_Ready_Resources <1) then
True - go to a prompt
False - go to the queue
It seems like this is behaving backwards. When I am logged in on my agent it seems to follow the True step which it should go to the queue. When I am logged out it goes to the false step, to the queue.
Any thoughs on why it would behave backwards?
thanks

Apologies, replying via the email interface is a bit annoying.
Your code is a tad confusing to begin with. Why are you checking to see if there are people in the not ready state before trying to queue?
Instead a cleaner flow would simply queue first, play the prompt and any other actions in the queue step. This way your person is immediately placed in the queue and if someone is available they go straight to them otherwise they will hear your prompt. If I am understanding your code properly, the if statement is unnecessary.
Regardless, why are you checking for agents not ready? (I'm honestly curious). Is there something more specific that needs to happen if an agent is not ready? Otherwise, your flow should be checking for Agents in the ready state
if(Agents_Ready > 0)
     true:
          queue
     false:
          prompt
but again this is entirely irrelevant considering:
Select Resource Step
     queue:
          prompt
          // no available agents
     connected:
         //agents ready
Perhaps I am completely misunderstanding? Apologies if that is the case.

If I report a problem and get a "you can't get

If I report a problem and get a "you can't get your money back", is that the end or has the matter been sent to support for a look?
What I did:
I have family share and I found Xcom there with the cloud download symbol, I tapped it and it said "you can't download this", about how specific it was. I tapped it again and it started downloading, never asked for password (to my memory). Later I get an email stating that I had been charged for the game. I submitted a problem and got a fast response, "you can't get your money back". Now, is that it? Or has the matter been forwarded to Apple? If I am not happy, and it hasn't been forwarded where do I turn?

It's Apple who told you no. That's it unless you want to try calling Apple Care.

How can I get the second group and report totals in Matrix report?

Hi,
I have created a matrix report with 2 break Groups.
Iam getting columns totals for the first group, but not for the second group and the report totals.
How can I get the second group and report totals for each month?
Thanks.
Ram.

Hi Ram,
If you want a total at any group-level, go to the particular group in the data model, insert a summary column in the group, and select
Reset At > appropriate Group Name
For report level summaries, you must create the summary column outside of all groups.
Navneet.

How to get selection screen elements and its table reference of a report ?

halo experts
How can I get selection screen elements and its table reference of a report ? . I tried rs_refresh_from_select_options. But I am unable to get the table and field it is referring to
For eg if my selection screen 1000 is
parameters: p_carrid type spfli-carrid,
select-options :s-_connid type sflight-connid.
is there any Fm or method which gives me what are the screen elements( p_carrid and s_connid ) and what table( splfi and sflight ) and field ( carrid and conid )it is referring to ?

The following code is an example of how you might dynamically determine all your PARAMETERS and SELECT-OPTIONS variables at run time. The PARAMETERS and SELECT-OPTIONS only point to a dictionary element--not a specific table. Even though you may say "spfli-carrid" or "sflight-connid", the data type really references the dictionary type and not a specific table/structure.
REPORT ZTEST_PROG.
TABLES sflight.
DATA:
       screen_tab TYPE STANDARD TABLE OF screen,
       wa_screen TYPE screen,
       scrn_nm TYPE string,
       scrn_leftover TYPE string,
       l_type TYPE REF TO cl_abap_typedescr,
       typ_nm TYPE string,
       typ_pre TYPE string.
FIELD-SYMBOLS <fs_data> TYPE ANY.
PARAMETERS p_carrid TYPE spfli-carrid.
SELECT-OPTIONS s_connid FOR sflight-connid.
INITIALIZATION.
LOOP AT SCREEN.
    IF screen-group3 = 'PAR'
      OR screen-group3 = 'LOW'.
        APPEND screen TO screen_tab.
    ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT screen_tab INTO wa_screen.
    ASSIGN (wa_screen-name) TO <fs_data>.
    l_type = cl_abap_typedescr=>describe_by_data( <fs_data> ).
    IF wa_screen-group3 = 'LOW'.
      SPLIT wa_screen-name AT '-' INTO scrn_nm scrn_leftover.
      TRANSLATE scrn_nm TO UPPER CASE.
    ELSE.
      scrn_nm = wa_screen-name.
    ENDIF.
    SPLIT l_type->absolute_name AT '=' INTO typ_pre typ_nm.
    WRITE:
             / 'Screen Name: ', scrn_nm,
             / 'DDIC Type:    ', typ_nm.
ENDLOOP.
When you get into defining internal tables you can determine those at run time with cl_abap_structdescr. The following is an example of how you might do that. You can loop through the "components_table" and evaluate each field of the structure in this way.
DATA: structure_reference TYPE REF TO cl_abap_structdescr,
      components_table TYPE abap_compdescr_tab,
      components_structure LIKE LINE OF components_table.
structure_reference ?= cl_abap_structdescr=>describe_by_data( any_structure ).
components_table = structure_reference->components.
I don't know if this answers any of your questions but I hope that some of it is useful.

I have received an email receipt charging me $109.99 for an app I've never heard of and definitely never downloaded. How do I report the problem and get a refund?

I have received an email receipt charging me $109.99 for an app I've never heard of and definitely never downloaded. How do I report the problem and get a refund?

Log into your iTunes account, then click on previous purchases then select the purchased app and then click report a problem. Then write and explain your problem and I am sure it will be considered.
Also change your iTunes password as soon as possible.

SQL Query to get Project Plan Name and Resource Name from Reporting database of Project Server 2007

Can you please help me to write an SQL Query to get Project Plan Name and Resource Name from Reporting database of Project Server 2007. Thanks!!

Refer
http://gallery.technet.microsoft.com/projectserver/Server-20072010-SQL-Get-a99d4bc6
SELECT
dbo.MSP_EpmAssignment_UserView.ProjectUID,
dbo.MSP_EpmAssignment_UserView.TaskUID,
dbo.MSP_EpmProject_UserView.ProjectName,
dbo.MSP_EpmTask_UserView.TaskName,
dbo.MSP_EpmAssignment_UserView.ResourceUID,
dbo.MSP_EpmResource_UserView.ResourceName,
dbo.MSP_EpmResource_UserView.ResourceInitials
INTO #TempTable
FROM dbo.MSP_EpmAssignment_UserView INNER JOIN
dbo.MSP_EpmProject_UserView ON dbo.MSP_EpmAssignment_UserView.ProjectUID = dbo.MSP_EpmProject_UserView.ProjectUID INNER JOIN
dbo.MSP_EpmTask_UserView ON dbo.MSP_EpmAssignment_UserView.TaskUID = dbo.MSP_EpmTask_UserView.TaskUID INNER JOIN
dbo.MSP_EpmResource_UserView ON dbo.MSP_EpmAssignment_UserView.ResourceUID = dbo.MSP_EpmResource_UserView.ResourceUID
SELECT
ProjectUID,
TaskUID,
ProjectName,
TaskName,
STUFF((
SELECT ', ' + ResourceInitials
FROM #TempTable
WHERE (TaskUID = Results.TaskUID)
FOR XML PATH (''))
,1,2,'') AS ResourceInitialsCombined,
STUFF((
SELECT ', ' + ResourceName
FROM #TempTable
WHERE (TaskUID = Results.TaskUID)
FOR XML PATH (''))
,1,2,'') AS ResourceNameCombined
FROM #TempTable Results
GROUP BY TaskUID,ProjectUID,ProjectName,TaskName
DROP TABLE #TempTable
-Prashanth

Hi, i was wounding if anyone would help me get information on the company regarding the acquisition of, beats by dre, could someone please help me out as i am doing a college report on this and need some good sources of information

hi, i was wounding if anyone would help me get information on the company regarding the acquisition of, beats by dre, could someone please help me out as i am doing a college report on this and need some good sources of information

Try a search with Google.
Why should we do your homework for you?

I cancelled my OS lion download after a few minutes and told them I do not want it and they have not put the credit back on my account. I reported the problem and have heard nothing after a week. How do you get to talk to the "Store"

I cancelled my OS lion download after a few minutes and told them I do not want it and they have not put the credit back on my account. I reported the problem and have heard nothing after a week. How do you get to talk to the "Store"

Amazingly the credit has appeared. Thanks to someone.

Getting Report File Path location at execution in TestStand 2012 and later

I need to include PNG pictures into my TestStand Report (HTML, XML, ATML).
When report generation was made through plugins (before TestStand 2012), it was easy to get report file location during execution through variable RunState.Root.Locals.ReportFilePath in order to save PNG files near the report file (in same directory).
I didn't find yet an easy an simple way to do the same in TestStand 2012 with Result Processing Plugins.
Any idea ?
Remarks :
Since this functionnality has to be included within MESULOG TS+ last version which is a TestStand Add-on, I cannot modify Report Options, Process Model or include a callback (like GetReportFilePath.
In need ReportFilePath within a Custom Step Type which cannot wait for PostUUT or ReportGeneration to save its PNG files.
Jean-Louis SCHRICKE
├ CTA - Certified TestStand Architect (2008 & 2010 & 2014)
├ CTD - Certified TestStand Developer (2004 & 2007)
└ CLD - Certified LabVIEW Developer (2003 & 2005)

jiggawax,
Thank you for you quick answer.
RunState.Root.Locals.ModelPluginConfiguration.Plugins[<plugin index>].PluginSpecific.Options.Directory is valid only if
RunState.Root.Locals.ModelPluginConfiguration.Plugins[<plugin index>].PluginSpecific.Options.DirectoryType is set to "SpecificDirectory".
It seems that I cannot get the complete ReportFilePath before "UUT Done" plugin entry which is after MainSequence execution.
Jean-Louis SCHRICKE
├ CTA - Certified TestStand Architect (2008 & 2010 & 2014)
├ CTD - Certified TestStand Developer (2004 & 2007)
└ CLD - Certified LabVIEW Developer (2003 & 2005)

Getting web host name, web-port, oral-report server name and virtual path

Hi.
I have been using oralce forms 6i on oracle application server 10g. I have three servers installed on remote locations.I just want that when i am hosting an application on a server, the web host name, web port , oracle report server name and the path of directory should be selected in a dynaminc variable at application level at run time. In this manner, I will be able to make a single application for all three servers. Any other solution to this problem is also welcomed. Please help anyone and oblige me.

Hi Rajesh,
Actually Web AS Host name is <Servername>.<domain name>:<Port no>
Web AS Path for R/3 is </sap/bc/bsp/sapd>
Refer the following link.
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=402561">https://forums.sdn.sap.com/thread.jspa?threadID=402561</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=265076">https://www.sdn.sap.com/irj/sdn/thread?threadID=265076</a>
Regards
Hemalatha
/Assign points if helpful/

From which table ,i ll get both the invoice and cleared amount ???

Hi Friends,
i am making a report for my sales client where finance part is also required.
the requirement is : the sales people want know the status of the invoice generated at their end.the report shud be like if they enter the invoice no,fiscal year and coustomer they will be able to see the status of the invoice.how much pmt has received for that particular invoice,wheather it is open or fully cleared?
From which table i can get both invoice no. and the payment/pmts rerceived against that invoce/invoices.
plz guide.
Regards,
Biswa

Hi,
SAP Standard Report itself covers all the requirements mentioned. With FBL5N, we get to know how much has been invoiced, paid and cleared and how much advance has been paid by customer etc., in one screen. Apart from this we have also all signs which show, which all invoices are due, overdue and its easy to analyse as well.
Was this requirement given by client after seeing this standard report?
Hope this info is helpful.
Regards,
Venkat

Get report on ingress and egress ipsec traffic size per session

Similar Messages

Maybe you are looking for