Get report page numbers

I am generating a test data record in Word with generating report toolkit. On every page I put in a footer text to the left with the date and time.
(in Labview with "set report footer text").
I also put in the Word template for the report, page numbers on the bottom RH side. When I run my vi I get the the footer text on the LH side,
but I loose the page numbers on the RH side. How do I solve this ?

Hi BartvStC,
i´m not sure what i should see in your vi, it don´t show what you make.
Attached you will find the vi with which i made it, the template doc and the result doc.
Mike
Attachments:
Unbenannt21.PNG ‏9 KB
Unbenannt1.PNG ‏10 KB
Unbenannt11.PNG ‏6 KB

Similar Messages

  • I can't get the page numbers in my table of contents to update when I update the book.

    I'm using Framemaker 11 and I have two TOCs in my book: one in English and one in French. Each TOC links to different documents in the same book. The reference page for each TOC is set and correctly displays the heading 1 and 2 I've told it to display, but the numbers do not update when the content in my document files changes to a different page. I've checked the conditional text settings in my document files; they are correct. When I update the book, I choose to update Numbering, All Cross-References, All Text Insets, OLE Links, Generate Table of Contents, Lists, and Indexes. What am I doing wrong? Thanks.

    I just tested this out and saw the same result as Rick - a book with child books ignores all generated files within the child books. This applies to adding content from them (e.g. their titles) to actually including them in the output. This applies to all versions of FM since v.9!
    However, there is a workaround for this. You need to use the hierarchical book structure in the parent book and create Folders for each book that you want to add. Then manually add the generated files (TOC, IX, List of..., etc.) and book to the respective folder. This is what it looks like for two child books in a parent book:
    Note that the child book generated files (TOC, IOR) show as just regular files at this point in the parent book. To get the page numbering to be continuous throughout the parent book, you will need to make a couple of passes. First set folder, files and books to have the Numbering continue from the previous (if you want all sequential page numbers). This will set the page numbers correctly except for what they were in the respective book TOCs. You will need to use the starting page number of the child TOC files in each folder (it shows in the Book status bar when click on the TOC file in the master/parent book).
    To set the individual book TOCs to be correct in the parent book, open the child book and set the TOC Numbering to start at the page stated in the parent book (status bar). Now update the child book to set the correct (parent book) page numbers in the child TOC. [This is a necessary manual step, as the page number assigned in the parent book is ignored when th child book is individually updated and FM uses 1 to start off the sequence in the child book.]  Repeat for each child book in the master/parent book.
    The final step is to Update the parent book and create the PDF. You should now have all of the files included in the PDF and the child TOCs should show the correct page numbers of the master book.
    This whole process of books within books seems a bit borked and one shouldn't have to be jumping through hoops to include child generated files. Please report this as a bug via: https://bugbase.adobe.com/index.cfm

  • How to get the page numbers of a word/mpp/execl doc using Java?

    Hi,
    I meet a problem in Java programming. I want to get the page numbers of a Word/MPP/EXECL/PDF document. For exmaple, if a PDF docment have 10 pages, I need get the 10 . How to get it using Java?
    Please advise me as soon as possible if you have any good suggestions! Thanks!
    Yin

    There are several good tools that allow you to access COM objects from Java. Here are two of the better ones:
    Bridge2Java
    http://www.alphaworks.ibm.com/tech/bridge2java
    J-Integra
    http://www.linar.com/
    Both of these tools will allow you to access MS Office products (including Word and Excel) via COM interfaces.

  • My InDesign document has two page 1s and I can't get the page numbers to work.  Help!

    My InDesign document has two page 1s and I can't get the page numbers to work.  Help!  How do I fix this?

    Do you mean the first section is starting at page one?
    And the second one now is starting at page two?
    So I would ask why you would need sections at all?
    Did you set the controls for Automatic Page Numbering?
    If you select the particular page where section two is starting in the Pages Panel, you could untick the Start Section option in the numbering and section dialog. That would remove the section. You cannot do that with the very first section, but you should set the first section to Automatic Page Numbering if you ever want to use your document with an inDesign book file.
    Uwe

  • Can not get correct page numbering for sections

    I have created a RTF template for a report that is Burst by USERID and then on the template I have the DeptID as the section for the report. When I run the report I get page numbering by DeptID - so if 1 department has 2 pages I see page 1 of 2, 2 of 2, then the page numbering starts over for the next department. I actually want the report to show a total number of pages for the entire report in the header. Any ideas on how I can accomplish this? Thanks!

    Vetri changed the template to have the body start prior to rows that I wanted repeated on all pages and then copied the repeated rows on the second page. This allowed for my page break between departments to happen and the page numbering in the heading also included the total number of pages not the total pages for each department.

  • How do I get all pages numbered in an 800 page combined pdf document?

    I took 12 PP presentations and made the handouts into pdfs. Then did the drag and drop into acrobat pro xi. It comes out to about 800 pages, but I cannot get it to print page numbers?

    Bill,
    I get an error message for the 757 page document do as you say. I made a header center for pages 1 to 757, get message, "a number is out of range"
    Carl

  • Oracle Reports - page numbering for repeating frames

    Hello,
    I have an Oracle Report that has one parent repeating frame containing several children repeating frames. One repeating frame has a maximum of three records per page. If the records do not exceed the maximum, page numbering is fine. If there are more than three records it creates a new page. The new page appends to the end of the report and throws off the page numbering. I changed the source of the page numbering from page number to panel number. The panel number gives the best results. All pages are numbered with the exception of the appended page(s). Does anyone have any suggestions?
    Thanks

    YES!!!, change the PRINT condition of your
    panel field to ALL instead of FIRST.
    null

  • My iPad crashed when I updated latest iOS software. After resetting the system, I am unable to get back Pages, Numbers and Keynote Apps. Anyone has same problem? And how can I get back the apps?

    My iPad Air crashed after updating latest iOS software. After resetting the system, Pages, Numbers and Keynotes are not available. How do I get the apps back into my iPad?

    You can also re-download the apps.
    App Store>Purchased>Re-download apps

  • How to get the page numbers in the PrintAdvance Data grid without using Vbox/Vgroup header or footer

    hi
    I want to print the page numbers for the data in Advance Data grid, For printing I am using print advance data grid , but unable to print the page numbers with that.
    actually i tried with Vbox/Vgroup, but when tha data is more because of this it is strucking, and more over imageRenderer in the PrintAdvancedataGrid not printing.
    can any one help in this regard?

    Image Caches hold images you've already loaded so the next time you request them, they can be made available without network latency.  This assume for your DG, that all images you need to print have been loaded by, for example, whatever DG the user was looking at before hitting Print.  This is easy when there are only a few icons used to show status, but won't work if each row has a different image unless you've somehow loaded up all of those images beforehand.
    Spark BitmapImage has an Image cache, but some third party ones are discussed here:
    http://thanksmister.com/2009/01/18/superimage-redux/
    -Alex

  • AR Customer statements report Page numbers Reset based on customer number

    Hello,
    In the AR Customer statements report, If I ran the report for multiple customers, page number has to be reset for each customer...
    Group Started like below,
    <?for-each-group:G_STATEMENT;STATEMENT_DATE?><?for-each-group:current-group();SEND_TO_ADDRESS_ID?>

    Hi Kittu,
    I got the answer using @section command.
    Below are the complete syntax in my case.
    Form field         --Xml Tag
    If Data Found --<?choose@section:?><?when:count(G_SETUP)!=0?>
    Group G_SETUP  --<?for-each@section:G_SETUP?>
    Group G_STATEMENT --<?for-each-group@section:G_STATEMENT;STATEMENT_DATE?><?for-each-group@section:current-group();SEND_TO_ADDRESS_ID?>
    Its working for me.
    Let me know if you required more information.
    Regards,
    Dasarath

  • Vb6 & IAC & acrobat 8: get the page numbers containing a text

    Hello All,
    i have a big problem! i have to retrive in someway, in which pages there's a text. I tryed to use the findtext function, but i'm not able to retrive the pages number where the text is present... How can i solve my problem? Is it possible to search the text only in one page so that i can cycle all the pages and search the text in page by page?
    thanx in advance
    Denis

    the problem with findwords in the sdk is that it's for .net while i use vb6 and when i try to use the jso i get an error... is it compatible with vb6?
    thanx for your help!

  • Why is Acrobat labeling my page numbers incorrectly?

    Whenever I open up Adobe Acrobat Pro X to convert a Word file to a PDF, it labels the page numbers incorrectly. For example, even though there are 8 pages it will say on the bottom right '1 out of 3 pages' or '7 out of 3 pages'. This also happens whenever I open the file in Word (2007) and click "save as --> PDF". The only time it gets the page numbers correct is when I open the file in Word, and click "Save As" and on the pop-up window I change the file type to PDF. The only problem with this is that most of the time I am trying to convert as many as 100 files at a time and this get can excruciatingly tedious after a while...please help and save me from a lot of clicking!
    Let me know if you need anymore details...

    I think you may find this happening if you print to paper from WORD also. As I recall, it was a bug in WORD and an update of WORD resolves the problem. However, it has been a long time since this has been reported and so I may have remembered wrong. It would not hurt to update Acrobat also. You did not mention the version number of either, or your OS, so I am just suggesting typical things.

  • Page numbering- How can I start with a specific Page #?

    I'm using Pages 09 (snow leopard, and Pages on my iPad IOS 4.3.5) and I'm trying to get pages to start numbering using specific numbers.  For example lets say I'm editing chapter 3 of a book which starts on page 84.  Chapter 3 is its own document and always starts numbering with page 1.  I know I could make one large document by pasting all the chapters into a single doc, but I hate working on such large documents.  Editing single chapters at a time is easier to navigate.
    Is there anyway to get the page numbering to do this?  I've tried all the options in the page set up and nothing seems to work.  Pages always start with 1 at the begining of a document.
    Thanks in advance for any help!
    Cheers!
    David

    In Pages on your Mac you used the inspectors for most functions. You can change starting page numbers in the section tab of the layout inspector.

  • Page numbers different sizes on different pages

    How do I get the page numbers I added (version 9) to be the same size througout the document?  My document has different font sizes throughout and there are a few pages where the page number gets real small.  How Do I keep the page numbers the same size throughout the document? Thanks!!

    Look in the Inspector palette > Lay out > Section. Is "left and right page different" ticked? Detick it.

  • Adobe Reader Read Mode Floating Toolbar Missing Page Numbers

    How do I get the page numbers to show up in the Read Mode toolbar.
    Mine are missing.
    I Googled it for a while and wasn't able to find anything.

    Could it be related to a group policy setting?

Maybe you are looking for