Get rid of the 'Missing'with Custom Effects

Hi
i've created some Custom Effects with Ae.But some of them have the word 'Missing'in front of the actual Effect.
how can i get rid of that?All Effects work though.
thx

I have the same problem.
I'm running both CS4 and CS5 here and have appended the exact same Custom Effect code to the PresetEffects.xml file in each version.
The CS4 project works fine; but when the same project is opened (and converted of course) in to CS5 I get a dialog warning me that the effects are missing, and I get the "Missing: " text in front of the effect name everywhere it appears.
However as noted the effects still seem to work: that is, the controls are still there and usable and the expressions attached to their parameters have come through intact.
I have verified this to be the case also with CE's from Maltaanon and others which are installed via the PolyCE Installer AIR application. They work in CS4 but are displayed as "Missing: " in CS5.
However the original poster says only "some" of their effects have this problem? Maybe you could analyze the any possible difference in how you coded them? Has something changed with the XML syntax or something?
Would be nice if this was fixed and for that matter also nice if they finally enable the "Popup" type controller via XML as well..;)

Similar Messages

CAN'T GET RID OF THE MISSED CALL ICON

STILL HAVING AN ISSUE WITH THE "MISSED CALL" ICON.
I HAVE A MISSED CALL ICON ON MY PHONE THAT WON'T GO AWAY. THE ICON SHOWS THAT I HAVE A MISSED CALLED BUT THERE ARE NO CALLS IN THE CALL LOG. THIS HAS HAPPENED BEFORE AND I HAD TO WIPE MY HANDHELD CLEAN. IS THERE A WAY I CAN GET RID OF THIS WITHOUT WIPING MY BLACKBERRY CLEAN?
Solved!
Go to Solution.

STEBER2 wrote:
What is it about the caps lock.? Everyone seems to be complaining about it.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to get rid of the missed call notification banner? - galaxy s3

SAMSUNG GALAXY S3
Has anyone found a way to get rid of - that is, keep it from EVER being displayed - the missed call notification banner on the lockscreen? I've tried everything I can think of short of getting a different phone ... a third party app worked perfectly until we were "blessed" with KitKat in the most recent software upgrade.

Hey mayor360, I know that would concern me a bit too having my missed call notifications being shown while my device is locked. I have done some reasearch on my end and have found that for many users have been using 3rd party applications just as you have. If after the update your specific application started to not function we can try to reset the device to ensure there are no software issues and then install the application once more. If you'd like to give the reset a shot you can click this link to see how http://bit.ly/1pphu6w. This step will erase all the information on the device, so you want to make sure the device is backed up before proceeding. To backup your device you can simply download our Verizon Cloud application in the Google Play Store. Keep us updated. -AdamG_VZW

HT3702 how can i get rid of the link between my credit card and itunes?

i initially linked my credit card to my itunes account as i thought it would be easier to download songs. but now whenever i go to update an app on my phone it tells me i need to support billing details so i re enter them and it tells me that i am wrong and i cant update my apps? even when they are free?
is this because there is no money in my account or what? and how do i get rid of the assosiation with my card and itunes?

You have to create a new Apple ID by following the steps in this article: http://support.apple.com/kb/ht2534.

When using 'sponge' effect on a fill, how do I get rid of the white 'pixellations' (if that is what they are called around the edges of the fill?

When using 'sponge' effect on a fill, how do I get rid of the white 'pixellations' (if that is what they are called around the edges of the fill?

I tried to give you this solution before, but maybe you missed it. This simple procedure will mask out all the various sponge edge-artifacts. Here it is in simple steps:
1. Make the path shape you want to apply the sponge effect to.
2. Highlight that path, and select Object > Path > Offset path ... choose +2 points (or whatever works for your drawing scale, to ultimately eliminate the outside line and the artifacts) -- this will make a slightly larger shape, based on the original shape.
3. Cut the outside path (command or alt-X), select the inside path, and paste the outer path BEHIND the inner path (command or alt-B).
4. Apply the sponge effect to the OUTER path.
5. Highlight BOTH paths, and create a MASK (command or alt-7).
Now you have your original shape, with sponge applied, and the outer 2 points (or whatever your Offset Path was set to), are masked out, masking out the outside line and the sponge artifacts.
This works with any Document Raster Effect Settings dpi.

With Knoll Light Factory how do you get rid of the pinpoint of light that overlap obscuration layer?

I have KLF 3.0 on AE CS6, I am trying to add a nice flare to some keyed footage of a rock star for music video...
I set it up so it looks like a light is behind him and I want him to obscure it a bit when he moves around... However, I can't get rid of the little pinpoint of light where I have the source! My obscuration layer works properly, as he crosses it it dims the light, but the light doesn't totally disappear when he's in front of the "Source"! There's still a little pinpoint that crosses over him ruining the effect I'm going for!
Does someone know how to get rid of that little artifact?
I've tried tweaking all the settings to no avail...
Thanks all!
Aza

Interesting. I have also experienced a similar problem involving a Knoll lens flare effect (v. 3.0) and obscuration, in this case some 3D text, backlit by a Knoll flare applied to a background layer. The flare moved across and behind the text and faded in and out either side of the text within the comp frame via keyframed opacity settings. The pinpoint of light appeared against the background at the end of the flare's path (beyond the text) on an opacity keyframe that was mistakenly adjusted to 1% instead of 0%. However after re-setting it to 0% and RAM previewing the pinpoint of light remained. Couldn't be eliminated. It was permanent and was also visible in the rendered output. The only quick way to eliminate it was to replace the background layer with a new one, add a new Knoll lens flare effect, copy and paste the keyframes from the original Knoll effect, check the opacity was indeed set to zero at the total fade-out frame and render/playback again. The pinpoint was gone. Puzzling. Not sure if this is what's happening in your case though.

I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.

I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.

Okay, folks, after a 3 1/2 hour phone call with a (very patient) telephone support person at Blackberry, here's what I learned.
You can check your USB drivers this way:
Plug in your phone into your USB drive. Assuming your Blackberry is "seen" by your computer...
Go into the Device Manager on your computer (control panel)
Expand the Universal Serial Bus controllers item on the bottom of the list
Right-click on BlackBerry Smartphone and choose Properties
Click on the Driver tab
Click on the Driver Details button
You should see one driver. I saw two. The one the BlackBerry likes is the RimUsb one.
So here's what NOT to do: We tossed the entire driver that was the "extra". This effectively made using my mouse and keyboard impossible, as they are USB, and sent my poor husband into the basement to find a million-year-old keyboard (and then a mouse) with the old fashioned kind of connectors (PS2). Bleh. Don't do that.
Here's what I did that worked (not saything this will work for you -- this modifies the Registry so better do a system backup with that backup and restore if you're nervous about this sort of thing):
From the start menu, choose run, and type regedit to get into the Registry editor.
Follow this file path: Computer, HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, Class
Click on: {36FCE60-C465-11CF-8056-4445535400000}
If there's an item on the right called "UpperFilters", delete it. (see pictures)
Hope this helps someone.
Karin
First pic: shows "before"
Second pic: shows full file path and "after"

Can't get rid of the Ken Burns Effect!!

Not sure why, but when choose Show Photo info when working on the clips in iMovieHD, in Preview, I don't see the photo. It's just black. I also can not get rid of the Ken Burns Effect. I click the X so it won't be applied to the photos, but it does it anyway. This is becoming very frustrating. Is there some sort of bug that's causing it to do this? I started over several times seeing if that would help, but it hasn't. Any suggestions??

Cathy,
that yellow star, you gave Sue were the last 5 points to make her an honorable
LEVEL 4
forum member...
CONGRATS, SDILLINI!
hooray... ;-)))))
from the working pits down here in Level3....
(probably, she doesn't hear me, hanging out with the other Big Boys in The L4 Lounge...)

How do I get rid of the 3d effect when opening home screen? It gives me a headache.

How do I get rid of the 3d effect when opening home screen? It gives me a headache.

jimginakouri wrote:
It's more of a "zoom-in/zoom-out" every time you turn on home screen or open/close an app.
THAT you can't change. Silly of Apple not to provide a setting to back out the animation effects either as a whole or individually.

How do I get rid of the Ken Burns effect on my photos

I would like to get rid of the Ken Burns effect on my photos I addes to my video. How do I do that

When you create a New Project and give it a name, the next thing you should always do is go to File>Project Properties and make sure in 'Initial Photo Placement you have selected either Fit or Crop. It seems the default setting is the Ken Burns annoyance.

I have an iPhone 6 with IOS 8.1.3 and when I use the landscape view in Safari, the bookmark page appears and takes up one half of the screen. How can I get rid of the bookmark page so I can have the whole screen to what I am browsing?

I have an iPhone 6 with IOS 8.1.3. When I go to the landscape view in Safari, the bookmark page appears and takes up one half of the screen. How can I get rid of the bookmark page so I can use the whole screen to what I am browsing?

OOPS! Too quick on the trigger to ask that question without trying anything. Sorry. Solved it by touching the bookmark icon.

Hi,I have made a new Apple ID and logged in on my phone, on settings, but the app store is still using my old one. How do I get rid of the old ID and replace it with the new one?

Hi, I have made a new Apple ID and logged in on my phone, settings > iTunes & app stores, but the app store is still using my old Apple ID. How do I get rid of the old ID and replace it with the new one?

HAYDONISRAD wrote:
... Maybe I'll stick with hers for now :-)
OR...
You could use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?

How do I get rid of the iCloud Backup alert message? I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset. Thanks

How do I get rid of the iCloud Backup alert message? I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset. Thanks

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

HT4314 Hi I have clash of clans only Game Center on my iPhone and on my iPad and I want to get rid of the one on my iPad, on my iPhone it always comes up with 'would you like to use you town hall level 4' help!

Hi I have clash of clans only Game Center on my iPhone and on my iPad and I want to get rid of the one on my iPad, on my iPhone it always comes up with 'would you like to use you town hall level 4' help!

Please help me back my clash of clans game. I cant access my games. But im steel can visit. Please hepl me.

How to get rid of the blue underline with green arrows on words and then a pop-up ad appears.

How to get rid of the blue underline with green arrows on words and then a pop-up ad appears.

Click here and follow the instructions, or if they don't cover the type of adware on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(119795)

Get rid of the 'Missing'with Custom Effects

Similar Messages

Maybe you are looking for