Get rid of the SVC enable

I've found that my clients can NOT access to my ASA 5510 with their Cisco VPN Client Ver 5.0 through IPsec over UDP.
By comparing my new running config with the old one I found some strang following configuration:
svc enable
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol IPSec l2tp-ipsec
We have 3 diffrent IT expert who have access to our router and I think this configuration is cause of our VPN access problem.
Is it really because of that or somthing els.
Any way I want to know how can I get rid of these configuration?
Thanks

Hi Portuquez,
Thanks for your really quick respond. Here is the outputs:
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:33 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:33 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:33 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:33 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:33 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:33 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:33 [IKEv1]: IP = 184.151.63.210, IKE_DECODE SENDING Message (msgid=
0) with payloads : HDR + NOTIFY (11) + NONE (0) total length : 596
Mar 14 11:57:33 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, All SA prop
osals found unacceptable
Mar 14 11:57:33 [IKEv1]: IP = 184.151.63.210, All IKE SA proposals found unaccep
table!
Mar 14 11:57:33 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE AM Resp
onder FSM error history (struct &0xae14aee8)  , :  AM_DONE, EV_ERR
OR-->AM_BLD_MSG2, EV_PROCESS_SA-->AM_BLD_MSG2, EV_GROUP_LOOKUP-->AM_BLD_MSG2, EV
_PROCESS_MSG-->AM_BLD_MSG2, EV_CREATE_TMR-->AM_START, EV_RCV_MSG-->AM_START, EV_
START_AM-->AM_START, EV_START_AM
Mar 14 11:57:33 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE SA AM:f
1735152 terminating:  flags 0x0100c001, refcnt 0, tuncnt 0
Mar 14 11:57:33 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, sending del
ete/delete with reason message
Mar 14 11:57:33 [IKEv1]: Group = skyline, IP = 184.151.63.210, Removing peer fro
m peer table failed, no match!
Mar 14 11:57:33 [IKEv1]: Group = skyline, IP = 184.151.63.210, Error: Unable to
remove PeerTblEntry
Mar 14 11:57:38 [IKEv1]: IP = 184.151.63.210, IKE_DECODE RECEIVED Message (msgid
=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) +
VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length :
851
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, processing SA payload
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ke payload
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ISA_KE payload
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, processing nonce payload
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ID payload
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, Received xauth V6 VID
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, Received DPD VID
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Fragmentation VID
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, IKE Peer included IKE fragme
ntation capability flags:  Main Mode:        True  Aggressive Mode:  False
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, Received NAT-Traversal ver 0
2 VID
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:38 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Cisco Unity client
VID
Mar 14 11:57:38 [IKEv1]: IP = 184.151.63.210, Connection landed on tunnel_group
skyline
Mar 14 11:57:38 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, processing
IKE SA payload
Mar 14 11:57:38 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:38 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:38 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:38 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:38 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:38 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:38 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:38 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:38 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:38 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:38 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:38 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:38 [IKEv1]: IP = 184.151.63.210, IKE_DECODE SENDING Message (msgid=
0) with payloads : HDR + NOTIFY (11) + NONE (0) total length : 596
Mar 14 11:57:38 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, All SA prop
osals found unacceptable
Mar 14 11:57:38 [IKEv1]: IP = 184.151.63.210, All IKE SA proposals found unaccep
table!
Mar 14 11:57:38 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE AM Resp
onder FSM error history (struct &0xae3ca500)  , :  AM_DONE, EV_ERR
OR-->AM_BLD_MSG2, EV_PROCESS_SA-->AM_BLD_MSG2, EV_GROUP_LOOKUP-->AM_BLD_MSG2, EV
_PROCESS_MSG-->AM_BLD_MSG2, EV_CREATE_TMR-->AM_START, EV_RCV_MSG-->AM_START, EV_
START_AM-->AM_START, EV_START_AM
Mar 14 11:57:38 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE SA AM:1
deaf147 terminating:  flags 0x0100c001, refcnt 0, tuncnt 0
Mar 14 11:57:38 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, sending del
ete/delete with reason message
Mar 14 11:57:38 [IKEv1]: Group = skyline, IP = 184.151.63.210, Removing peer fro
m peer table failed, no match!
Mar 14 11:57:38 [IKEv1]: Group = skyline, IP = 184.151.63.210, Error: Unable to
remove PeerTblEntry
Mar 14 11:57:43 [IKEv1]: IP = 184.151.63.210, IKE_DECODE RECEIVED Message (msgid
=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) +
VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length :
851
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, processing SA payload
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ke payload
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ISA_KE payload
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, processing nonce payload
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ID payload
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, Received xauth V6 VID
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, Received DPD VID
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Fragmentation VID
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, IKE Peer included IKE fragme
ntation capability flags:  Main Mode:        True  Aggressive Mode:  False
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, Received NAT-Traversal ver 0
2 VID
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:43 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Cisco Unity client
VID
Mar 14 11:57:43 [IKEv1]: IP = 184.151.63.210, Connection landed on tunnel_group
skyline
Mar 14 11:57:43 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, processing
IKE SA payload
Mar 14 11:57:43 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:43 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:43 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:43 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:43 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:43 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:43 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:43 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:43 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:43 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:43 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:43 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:43 [IKEv1]: IP = 184.151.63.210, IKE_DECODE SENDING Message (msgid=
0) with payloads : HDR + NOTIFY (11) + NONE (0) total length : 596
Mar 14 11:57:43 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, All SA prop
osals found unacceptable
Mar 14 11:57:43 [IKEv1]: IP = 184.151.63.210, All IKE SA proposals found unaccep
table!
Mar 14 11:57:43 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE AM Resp
onder FSM error history (struct &0xae3ca500)  , :  AM_DONE, EV_ERR
OR-->AM_BLD_MSG2, EV_PROCESS_SA-->AM_BLD_MSG2, EV_GROUP_LOOKUP-->AM_BLD_MSG2, EV
_PROCESS_MSG-->AM_BLD_MSG2, EV_CREATE_TMR-->AM_START, EV_RCV_MSG-->AM_START, EV_
START_AM-->AM_START, EV_START_AM
Mar 14 11:57:43 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE SA AM:e
1637447 terminating:  flags 0x0100c001, refcnt 0, tuncnt 0
Mar 14 11:57:43 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, sending del
ete/delete with reason message
Mar 14 11:57:43 [IKEv1]: Group = skyline, IP = 184.151.63.210, Removing peer fro
m peer table failed, no match!
Mar 14 11:57:43 [IKEv1]: Group = skyline, IP = 184.151.63.210, Error: Unable to
remove PeerTblEntry
Mar 14 11:57:48 [IKEv1]: IP = 184.151.63.210, IKE_DECODE RECEIVED Message (msgid
=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) +
VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length :
851
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, processing SA payload
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ke payload
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ISA_KE payload
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, processing nonce payload
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ID payload
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, Received xauth V6 VID
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, Received DPD VID
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Fragmentation VID
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, IKE Peer included IKE fragme
ntation capability flags:  Main Mode:        True  Aggressive Mode:  False
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, Received NAT-Traversal ver 0
2 VID
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:57:48 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Cisco Unity client
VID
Mar 14 11:57:48 [IKEv1]: IP = 184.151.63.210, Connection landed on tunnel_group
skyline
Mar 14 11:57:48 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, processing
IKE SA payload
Mar 14 11:57:48 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:48 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:48 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:48 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:48 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:48 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:48 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:48 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:48 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:48 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:48 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:48 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:57:48 [IKEv1]: IP = 184.151.63.210, IKE_DECODE SENDING Message (msgid=
0) with payloads : HDR + NOTIFY (11) + NONE (0) total length : 596
Mar 14 11:57:48 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, All SA prop
osals found unacceptable
Mar 14 11:57:48 [IKEv1]: IP = 184.151.63.210, All IKE SA proposals found unaccep
table!
Mar 14 11:57:48 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE AM Resp
onder FSM error history (struct &0xae737fa0)  , :  AM_DONE, EV_ERR
OR-->AM_BLD_MSG2, EV_PROCESS_SA-->AM_BLD_MSG2, EV_GROUP_LOOKUP-->AM_BLD_MSG2, EV
_PROCESS_MSG-->AM_BLD_MSG2, EV_CREATE_TMR-->AM_START, EV_RCV_MSG-->AM_START, EV_
START_AM-->AM_START, EV_START_AM
Mar 14 11:57:48 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE SA AM:8
c1c1c40 terminating:  flags 0x0100c001, refcnt 0, tuncnt 0
Mar 14 11:57:48 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, sending del
ete/delete with reason message
Mar 14 11:57:48 [IKEv1]: Group = skyline, IP = 184.151.63.210, Removing peer fro
m peer table failed, no match!
Mar 14 11:57:48 [IKEv1]: Group = skyline, IP = 184.151.63.210, Error: Unable to
remove PeerTblEntry
debug crypto ipsec 190
ciscoasa# Mar 14 11:58:36 [IKEv1]: IP = 184.151.63.210, IKE_DECODE RECEIVED Mess
age (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VEND
OR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total
length : 851
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, processing SA payload
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ke payload
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ISA_KE payload
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, processing nonce payload
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ID payload
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, Received xauth V6 VID
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, Received DPD VID
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Fragmentation VID
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, IKE Peer included IKE fragme
ntation capability flags:  Main Mode:        True  Aggressive Mode:  False
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, Received NAT-Traversal ver 0
2 VID
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:36 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Cisco Unity client
VID
Mar 14 11:58:36 [IKEv1]: IP = 184.151.63.210, Connection landed on tunnel_group
skyline
Mar 14 11:58:36 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, processing
IKE SA payload
Mar 14 11:58:36 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:36 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:36 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:36 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:36 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:36 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:36 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:36 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:36 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:36 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:36 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:36 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:36 [IKEv1]: IP = 184.151.63.210, IKE_DECODE SENDING Message (msgid=
0) with payloads : HDR + NOTIFY (11) + NONE (0) total length : 596
Mar 14 11:58:36 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, All SA prop
osals found unacceptable
Mar 14 11:58:36 [IKEv1]: IP = 184.151.63.210, All IKE SA proposals found unaccep
table!
Mar 14 11:58:36 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE AM Resp
onder FSM error history (struct &0xae2e03c0)  , :  AM_DONE, EV_ERR
OR-->AM_BLD_MSG2, EV_PROCESS_SA-->AM_BLD_MSG2, EV_GROUP_LOOKUP-->AM_BLD_MSG2, EV
_PROCESS_MSG-->AM_BLD_MSG2, EV_CREATE_TMR-->AM_START, EV_RCV_MSG-->AM_START, EV_
START_AM-->AM_START, EV_START_AM
Mar 14 11:58:36 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE SA AM:6
692c100 terminating:  flags 0x0100c001, refcnt 0, tuncnt 0
Mar 14 11:58:36 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, sending del
ete/delete with reason message
Mar 14 11:58:36 [IKEv1]: Group = skyline, IP = 184.151.63.210, Removing peer fro
m peer table failed, no match!
Mar 14 11:58:36 [IKEv1]: Group = skyline, IP = 184.151.63.210, Error: Unable to
remove PeerTblEntry
Mar 14 11:58:41 [IKEv1]: IP = 184.151.63.210, IKE_DECODE RECEIVED Message (msgid
=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) +
VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length :
851
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, processing SA payload
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ke payload
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ISA_KE payload
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, processing nonce payload
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ID payload
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, Received xauth V6 VID
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, Received DPD VID
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Fragmentation VID
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, IKE Peer included IKE fragme
ntation capability flags:  Main Mode:        True  Aggressive Mode:  False
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, Received NAT-Traversal ver 0
2 VID
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:41 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Cisco Unity client
VID
Mar 14 11:58:41 [IKEv1]: IP = 184.151.63.210, Connection landed on tunnel_group
skyline
Mar 14 11:58:41 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, processing
IKE SA payload
Mar 14 11:58:41 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:41 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:41 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:41 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:41 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:41 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:41 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:41 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:41 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:41 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:41 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:41 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:41 [IKEv1]: IP = 184.151.63.210, IKE_DECODE SENDING Message (msgid=
0) with payloads : HDR + NOTIFY (11) + NONE (0) total length : 596
Mar 14 11:58:41 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, All SA prop
osals found unacceptable
Mar 14 11:58:41 [IKEv1]: IP = 184.151.63.210, All IKE SA proposals found unaccep
table!
Mar 14 11:58:41 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE AM Resp
onder FSM error history (struct &0xaec001e0)  , :  AM_DONE, EV_ERR
OR-->AM_BLD_MSG2, EV_PROCESS_SA-->AM_BLD_MSG2, EV_GROUP_LOOKUP-->AM_BLD_MSG2, EV
_PROCESS_MSG-->AM_BLD_MSG2, EV_CREATE_TMR-->AM_START, EV_RCV_MSG-->AM_START, EV_
START_AM-->AM_START, EV_START_AM
Mar 14 11:58:41 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE SA AM:7
7811ec5 terminating:  flags 0x0100c001, refcnt 0, tuncnt 0
Mar 14 11:58:41 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, sending del
ete/delete with reason message
Mar 14 11:58:41 [IKEv1]: Group = skyline, IP = 184.151.63.210, Removing peer fro
m peer table failed, no match!
Mar 14 11:58:41 [IKEv1]: Group = skyline, IP = 184.151.63.210, Error: Unable to
remove PeerTblEntry
Mar 14 11:58:46 [IKEv1]: IP = 184.151.63.210, IKE_DECODE RECEIVED Message (msgid
=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) +
VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length :
851
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, processing SA payload
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ke payload
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ISA_KE payload
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, processing nonce payload
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ID payload
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, Received xauth V6 VID
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, Received DPD VID
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Fragmentation VID
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, IKE Peer included IKE fragme
ntation capability flags:  Main Mode:        True  Aggressive Mode:  False
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, Received NAT-Traversal ver 0
2 VID
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:46 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Cisco Unity client
VID
Mar 14 11:58:46 [IKEv1]: IP = 184.151.63.210, Connection landed on tunnel_group
skyline
Mar 14 11:58:46 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, processing
IKE SA payload
Mar 14 11:58:46 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:46 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:46 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:46 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:46 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:46 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:46 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:46 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:46 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:46 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:46 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:46 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:46 [IKEv1]: IP = 184.151.63.210, IKE_DECODE SENDING Message (msgid=
0) with payloads : HDR + NOTIFY (11) + NONE (0) total length : 596
Mar 14 11:58:46 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, All SA prop
osals found unacceptable
Mar 14 11:58:46 [IKEv1]: IP = 184.151.63.210, All IKE SA proposals found unaccep
table!
Mar 14 11:58:46 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE AM Resp
onder FSM error history (struct &0xa7b62e58)  , :  AM_DONE, EV_ERR
OR-->AM_BLD_MSG2, EV_PROCESS_SA-->AM_BLD_MSG2, EV_GROUP_LOOKUP-->AM_BLD_MSG2, EV
_PROCESS_MSG-->AM_BLD_MSG2, EV_CREATE_TMR-->AM_START, EV_RCV_MSG-->AM_START, EV_
START_AM-->AM_START, EV_START_AM
Mar 14 11:58:46 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE SA AM:3
6bb869f terminating:  flags 0x0100c001, refcnt 0, tuncnt 0
Mar 14 11:58:46 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, sending del
ete/delete with reason message
Mar 14 11:58:46 [IKEv1]: Group = skyline, IP = 184.151.63.210, Removing peer fro
m peer table failed, no match!
Mar 14 11:58:46 [IKEv1]: Group = skyline, IP = 184.151.63.210, Error: Unable to
remove PeerTblEntry
Mar 14 11:58:51 [IKEv1]: IP = 184.151.63.210, IKE_DECODE RECEIVED Message (msgid
=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) +
VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length :
851
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, processing SA payload
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ke payload
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ISA_KE payload
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, processing nonce payload
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, processing ID payload
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, Received xauth V6 VID
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, Received DPD VID
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Fragmentation VID
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, IKE Peer included IKE fragme
ntation capability flags:  Main Mode:        True  Aggressive Mode:  False
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, Received NAT-Traversal ver 0
2 VID
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, processing VID payload
Mar 14 11:58:51 [IKEv1 DEBUG]: IP = 184.151.63.210, Received Cisco Unity client
VID
Mar 14 11:58:51 [IKEv1]: IP = 184.151.63.210, Connection landed on tunnel_group
skyline
Mar 14 11:58:51 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, processing
IKE SA payload
Mar 14 11:58:51 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:51 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:51 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:51 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:51 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:51 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:51 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:51 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:51 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:51 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:51 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:51 [IKEv1]: Phase 1 failure:  Mismatched attribute types for class
Group Description:  Rcv'd: Group 2  Cfg'd: Group 1
Mar 14 11:58:51 [IKEv1]: IP = 184.151.63.210, IKE_DECODE SENDING Message (msgid=
0) with payloads : HDR + NOTIFY (11) + NONE (0) total length : 596
Mar 14 11:58:51 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, All SA prop
osals found unacceptable
Mar 14 11:58:51 [IKEv1]: IP = 184.151.63.210, All IKE SA proposals found unaccep
table!
Mar 14 11:58:51 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE AM Resp
onder FSM error history (struct &0xa7b62e58)  , :  AM_DONE, EV_ERR
OR-->AM_BLD_MSG2, EV_PROCESS_SA-->AM_BLD_MSG2, EV_GROUP_LOOKUP-->AM_BLD_MSG2, EV
_PROCESS_MSG-->AM_BLD_MSG2, EV_CREATE_TMR-->AM_START, EV_RCV_MSG-->AM_START, EV_
START_AM-->AM_START, EV_START_AM
Mar 14 11:58:51 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, IKE SA AM:d
b6e5d1d terminating:  flags 0x0100c001, refcnt 0, tuncnt 0
Mar 14 11:58:51 [IKEv1 DEBUG]: Group = skyline, IP = 184.151.63.210, sending del
ete/delete with reason message
Mar 14 11:58:51 [IKEv1]: Group = skyline, IP = 184.151.63.210, Removing peer fro
m peer table failed, no match!
Mar 14 11:58:51 [IKEv1]: Group = skyline, IP = 184.151.63.210, Error: Unable to
remove PeerTblEntry

Similar Messages

  • When I plug my ipod touch into the pc, it tells me:the ipod cannot be used because the apple mobile device service is not started. What does this mean and how do I get rid of that and enable syncing?

    When I plug my ipod touch into the pc, it tells me:the ipod cannot be used because the apple mobile device service is not started. What does this mean and how do I get rid of that and enable syncing?

    Hello Julia,
    Start with this article.
    http://support.apple.com/kb/ts1567
    B-rock

  • How to get rid of the guest network on E1000

    Is there a way to get rid of the guest network on a E1000 or is it part of the setup.

    Hello Burns1214 ,
    I posted an answer here http://homecommunity.cisco.com/t5/Wireless-Routers/Enable-quot-Guest-Access-quot-on-E1000-Router/m-p.... You can only disable it thru Cisco Connect software.

  • How do I get rid of the ugly yellow that is on Mozilla desk top now? I hate it

    how do I get rid of the ugly yellow on my desk top now with mozilla it is so ugly and annyoying? Can I change the color?

    See my second reply here:
    *[[/questions/1038807#answer-670671]] Who took a pee on Foxfire Start page; how get rid of yellow color?
    Mozilla shows snippets on the about:home page to run different campaigns and that changes regularly.
    If you prefer not to see snippets on the about:home page or if there are problems with a snippet then you can set the <b>browser.aboutHomeSnippets.updateUrl</b> pref to an empty string on the <b>about:config</b> page.
    Delete the <b>storage\persistent\moz-safe-about+home</b> folder in the Firefox profile folder with Firefox closed ("3-bar" Firefox menu button > Exit/Quit) to remove snippets stored in IndexedDB and make Firefox use a default snippet set.
    You can reset the browser.aboutHomeSnippets.updateUrl pref via the right-click context menu to the default value to re-enable the snippets and make Firefox recreate the moz-safe-about+home folder.
    Close and restart Firefox after changing the value of the browser.aboutHomeSnippets.updateUrl pref.

  • Apple Users Can't Get Rid Of The New 'Super Cookies' That Track Private Web Browsing

    Further to the article "Apple Users Can't Get Rid Of The New ‘Super Cookies’ That Track Private Web Browsing" https://ca.finance.yahoo.com/news/apple-users-cant-rid-super-180500863.html, is there a solution to resolve this security issue?
    Here's an excerpt from the above mentioned article;
    "Apple users are particularly vulnerable, as their devices do not have a function that lets users delete super cookies from their browsers.
    Most websites place what’s called a “cookie” on visitors’ computers, which is used to track them and record their preferences. It’s how websites can remember your password, for example. Like your web browsing history, they’re easy to delete. If you use your browser’s “private browsing” mode they’re never saved in the first place — and advertisers can't track you, and other computer users can't go back and see what you looked at.
    However, a flaw in a modern web security feature called “HTTP Strict Transport Security” (HSTS) allows websites to plant “super cookies” that can be used to track web users’ browsing habits even when private browsing is enabled.
    Here’s how it works.
    Security researcher Sam Greenhalgh writes that HSTS “allows a website to indicate that it should aways be accessed using a secure connection that encrypts your communication with the site.” This “flag” is then saved by your web browser, ensuring that any future visits to the website are secure. But this can also be abused, using this feature to store a unique number that can be used to track your web browser.
    And because HSTS carries over into private browsing, it means the “super cookie” can be used to track you whether you’re attempting to cover your steps or not.
    Greenhalgh says that Apple’s Safari web browser is especially vulnerable to the exploit. While clearing cookies on Mozilla’s Firefox, Google Chrome or Opera also erases HSTS flags, deleting the super cookies, there’s no way to do so on Safari on iOS devices.
    This means that if you’ve had super cookies placed on your iPad or iPhone, there’s effectively no way to get rid of them short of reformatting the entire machine."

    Hi all,
    I tried this with IOS 7.1.2 Safari on an iPad retina and the super cookie did not persist after web data and history was deleted.
    I also tried this with IOS 8.1.2 Safari on an iPhone 6, and the super cookie persisted even after deleting web history and website data.
    Evidently it was ok on 7.1.2 and broken on 8.1.2.

  • How do i get rid of the 'set up new email' text on...

    how do i get rid of the 'set up new email' text on the screen ?
    Thanks 

    Menu -> Tools -> Settings -> General -> Personalisation -> Home Screen -> Mode settings -> Home Screen applications -> Enabled applications.
    Remember that Home Screen must be set to Active.

  • Can I get rid of the white frame on Finder icon preview?

    This is another one of those things that Leopard has done that makes me wonder what the heck they were thinking! (Don't even get me started on the Windoze95 sidebar!) Why the heck take a wonderful thing like the Finder icon previews in Tiger, and make them solid white squares, with a nasty white border? These are stupid, ugly, and a massive step backward in interface design. I am assuming this is all done for the sake of "cover flow?" With decent Finder Icon previews, who needs it?
    But please, please, if you MUST 'fix' things for me, give me the ability to opt out! SO until Apple remembers what GOOD GUI design is, does anyone know how to get rid of the border & white background?
    Thanks!

    To each his or her own, but I find the frames & white backgrounds, if not particularly attractive, fairly useful for a quick visual reference of the images' proportions (like tall & skinny vs. nearly square). This is pretty hard to see if transparency is enabled & large parts of the image are transparent.
    When I do want to see the transparency, I find Cover Flow (& Quickview) very useful, although Cover Flow doesn't always seem to show alpha channels while QuickView always does. Plus, both versions of the technology allow much larger previews than in conventional icon Finder windows & support scroll wheels, making it easy to review large numbers of image files quickly at high resolution literally at the flick of a finger.
    FWIW, at first I thought this was just a gimmick with little practical value. Now that I have started using it, particularly in conjunction with smart searches, I think it is a great addition to the OS, one that is so intuitive & efficient that it makes the old icon view look like an antiquated relic from a time when computers were not powerful enough to manage more than tiny thumbnails.
    I'm not trying to convince you about this as you seem adamant about not liking it, but I do think it is the logic progression for browsing through ever larger numbers of ever higher resolution images, & is only going to get better at this as it becomes more refined. Perhaps someday a future version will meet your needs.

  • When capturing video; how do I get rid of the green lines at the bottom of the frame?

    When capturing video; How do I get rid of the green lines at the bottom of the frame?

    s.haider
    You have Canon ZR950 mini DV Camcorder, why not make a firewire connection and do DV data capture into the Premiere Elements 8.0/8.0.1 Capture Window?
    Do you have any reference for what you are attempting to do or is this a creation of your own? Could you confirm what you describe as "just capturing video".
    a. From your information, you are doing Get Media/Webcam or WDM Device with the Capture Window showing the Capturing Device as "Dazzle DVD 100 Video Device". What type of connection are you making between the Canon ZR950 and the Dazzle DVD 100 and the computer?
    b. What exactly do you expect to be putting on the Premiere Elements 8.0/8.0.1 Timeline from this capture...DV AVI or something else?
    Coming from the perspective of Premiere Elements 8.0/8.0.1 known issues, I would ask you to consider:
    a. Remove the check mark next to AutoAnalyzer in the Capture window. Even if you were doing this Capture the "usual way", that is highly recommended.
    b. Go to Edit Menu/Preferences/General, and compare your results with and without a check mark next to enable GPU playback. As a cross reference, please go to Edit Header/Effects/Video Effects and detemine if there is a category of Effects named GPU Effects. Do the same thing for Edit Header/Transitions/Video Transitions and determine if there is a category of Transitions named GPU Transitions.
    And, the general drill for all users of Premiere Elements 8.0
    a. Are you working with the automatic Background Rendering and AutoAnalzyer Features turned Off?
    See Premiere Elements workspace Edit Menu/Preferences/General for background rendering option and Elements Organizer workspace Edit Menu/Preferences/AutoAnalzyer Options for AutoAnalzyer options.
    b. Are you working from the 8.0.1 Update version of the program?
    Please consider.
    We will be watching for the outcome.
    Thank you.
    ATR

  • Is there any way to get rid of the private feature? Or to store history while using that feature?

    I would like to be able to get rid of the private feature. It is too hard to manage kids browsing and this makes it all the more difficult. I would like to be able to get rid of this feature all together or at least be able to store the history while this feature is open. There should be some way to see the history.

    Sorry, the Mozilla developers didn't include a switch to turn Private Browsing off. Any hack that I have seen posted would affect the main security file and possibly cause a security risk (advice provided by a Mozilla developer). There is a Bug filed to disable Firefox's Private Browsing mode when Windows Vista and Win 7 Parental Controls are enabled. I made a comment in that Bug in Oct 2009 and provided a list of threads (in Dec 2009) from this support forum that discussed the requests from parents for either a switch to turn the feature off or compatibility with Windows Parental Control, The final result of that effort was a comment about the (small - "two per week") number of threads where this topic was discussed. There haven't been any comments or any progress made since last April toward fixing that Bug. ''Please note that not every Bug is a fault with Firefox, a good number of Bugs are requests for enhancement of existing features or for adding new features.'' <br />
    https://bugzilla.mozilla.org/show_bug.cgi?id=471658 <br />
    https://bugzilla.mozilla.org/show_bug.cgi?id=471658#c36
    IMO, don't let the kids use Firefox due to this Bug. Or install a good external Parental Control program that records browsing history, as the one that comes with Windows doesn't do as much in Firefox as it does in IE, because of this Bug <br />
    https://support.mozilla.com/en-US/kb/Parental+controls.

  • Wiki Server: how to get rid of the "mail" nav menu item

    How do I get rid of the "mail" nav menu item at the top right of our Wiki? Our mail server isn't switched on so I wouldn't have expected it to show in the first place.

    I solved my issue, and it can probably help with yours too. Sounds like you'll have to enable web archives in order to disable them for individual groups.
    See my lonely thread at:
    http://discussions.apple.com/thread.jspa?messageID=7006339#7006339

  • I have a Australian iTunes account and want to switch to using the u.s store as I now live there, I cannot do this because I have $1.41 still in the oz account an image to have a zero balance to change stores, how can I get rid of the $1.41?

    I want to switch to the u.s store as I now live in the us, I cannot switch stores because my balance is $1.41 in the oz store and needs to be zero, how can I get rid of the $1.41 when everything costs more or less than that? I do not have a credit card on the oz iTunes account an I cannot use my us one to top it up.
    HELP

    Click here and request assistance.
    (60992)

  • Since downloading ios5 on my iphone 4 the capacity guage in itunes shows other as over 21Gb and i can no longer fit any music on it. How do I get rid of the other stuff? other

    Since downloading ios5 on my iphone 4 a few days ago, the capacity guage in itunes shows "other" as over 21Gb and i can no longer fit any music on my iphone.
    How do I get rid of the other stuff?
    capacity available on 32 Gb iphone is 28.49Gb
    i previously had 21.97 Gb music, over 6 Gb photos, about 1Gb of apps, and minute amount of audio
    now i have no music, 5.4 Gb photos and similar (0.8Gb) for  apps and audio. i have deleted heaps of photos and unused apps to try to make space but obviosly this is a much bigger problem. I also created a smaller music folder on itunes to sync to but at present no music is selected for syncing due to the lack of available space.
    i have 15Gb icloud account now also which is about half full.
    Ive done a little research and heard similar tales but with much smaller other totals than this. Can you help?
    i cant update my apps as i get a message saying i do not have enough available space.

    I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
    Before you restore or reset, I would try that first.

  • How do I get rid of the "other" data on my iPhone 4?

    The "other" data on my iPhone 4 is currently taking up 4.5 gb of my 6.4 gb phone. As you can see I'm not very happy about this. I am basically limited too about ten apps and I cannot download iOS 7 due to my lack of storage. I was wondering if there were any ways to get rid if the "other" data without resetting my iPhone. I cannot reset my iPhone because my family has a shared data plan and a limited amount of storage to back up to on iCloud. We don't have enough storage on iCloud to backup the 5.8 gb I'm using because of the other data. Any help?

    You would need to restore the iphone.

  • Some of my songs are listed twice on my iPod itself.  However, when I plug the iPod into my computer, the songs don't show up twice in iTunes when I click on device/music. How do I get rid of the duplicate songs on my iPod?

    Some of my songs are listed twice on my iPod itself.  However, when I plug the iPod into my computer, the songs don't show up twice in iTunes when I click on device/music. How do I get rid of the duplicate songs on my iPod?

    that is odd! that should not be happening.
    Are you syncing your songs right off of itunes itself? because it should be syncing over to the ipod however it is listed in itunes.

  • How can I get rid of the dates and time on my Notes

    How do I get rid of the dates and times on my Notes that appeared when I updated to 8?

    Yes, it's seems like a poor design decision.
    By putting the date on the line below the Note title in the Notes Index, the app shows half the number of notes per page AND if you have a large number of notes, it takes twice as long to stroll down.
    I doubt the designer actually uses the app. 
    TSAW

Maybe you are looking for

  • Iweb, SEO tool and Sitemap Automator

    I am quite new to iweb and I am confused about how to go about getting my web site to different search engines like Google, Yahoo, etc...... Once I have created the web site in iweb do I need to use an SEO tool to put in tags, meta tags and alternate

  • Source System BW - what is "Customizing for extractors" etc.

    Hi, Can somebody explain IN DETAIL what is the purpose of 1)Customizing for the extractors 2)Transfer Global settings 3)Transfer exchange rates I could not find any documentation in help.sap.com. Is there any documentation? thanks a lot

  • Getting started with tomcat 4

    Lets say I wanted to setup a workstation and a server to develop JSP and servlets. would this configuration work: workstation - J2SE java servlet sdk server - J2SE & Tomcat or do i also need J2EE ?

  • Telephone number validation

    Hi All Can you please let me know how to validate a telephone number entered in a GUI....Is there any standard function module. Please also let me know how its done in the BP transaction in CRM or R/3 Regards

  • Does java api allow access the ethernet card directly

    i m working on cluster computing. i like to code in java. i need to send object from one single machine to other machines in a university computer lab. i would like to send the objects very efficiently and fastly. i used java.net and also java.nio. b