Get SAP Business One connection

Hi all.
I'm creating a report using Crystal Reports Basic 2008 for SAP Business One and I have a question.
Our client has three databases under one server, so, I'm creating three reports and i'm conecting them under a UDL file.
My question is if it's possible to get the actual SAP Business One connection when the report is call? Because this way, I can only make a report instead of three.
I hope I was able to express myself best. I'm thank you and i'm waiting. Thanks.
The system have:
Windows Server 2008 SP2
SQL Server 2008
SAP Business One 8.8 PL 11
Crystal Reports Basic 2008 for SAP Business One 12.1.0.892

Hi,
I don't think that is possible since the sequence to run CR is after connecting to a specific database.
Thanks,
Gordon

Similar Messages

  • SAP Business One Integration Services Authentication Failed

    Dear ,
    ALL SAP forum members,
    Iam Using SAP Business One 8.81 PL 06, Micorsoft SQL 2008 R2
    In SLD B1DI and  JDBC, the connections were tested successfully.
    Whenever I log into SBO, I am getting "SAP Business One Integration Services Authentication Failed" error message. I did extensive research on all possible SBO documents dating 1 year back especially in B1ic Troubleshooting Document (New and Old) and searched the length of the SBO forums, but I could not a solution.
    I uninstalled and reinstalled the B1f package many a time. The integration services we re also restarted many times and the connections were all tested successfully. Firewall, AntiVirus also checked.
    In the B1f, in the Monitoring Window, the login is "Ok" but the AuthCheck is "Failed". I checked Authent.Monitor->Authentic Info  and I found the following message under Action message "Wrong Usrname and Password".
    I debugged and i found again "/com.sap.b1i.vplatform.scenarios.authen/sap.Xcelsius/Authenticate_Check.bfd
    But could not understand much of it.
    But i could go no further. The experts are requested to suggest their solutions, If any, to me as Iam stuck in this phase for the last 3 week
    I hope some experts will guide me over this issue
    Thanks and regards
    Ashish Gupte

    Hi Konstantin Ryahovsky
    Thanks for your reply. My problem is solved.
    And frankly speaking i dont know how it was solved. I have not uninstall, install ,not even i had restarted the server also.
    only change i did in SLD >> Maintainance >>> cfg Runtime >>>> Put server IP address instead of server Name and restarted the services.
    Thanks & regards
    Ashish Gupte

  • Error While Starting XL Reporter Addon on SAP Business One Server

    Hi Everyone,
    I have got the following error message while starting XL Reporter Addon on SAP Business One Server:-
    1. "Unable to Connect SAP Business One, Connection string is not valid [66000-84]. The user is not licensed." 
    2. "Addon does not have a License"
    while license is installed on this machine.

    Hi,
    Try these below steps:
    In Business One from the main menu go to Administration -> License -> License Administration.
    Select the user you wish to connect to the XL reporter.
    Assign the user the SAP AddOn License.
    JimM

  • Unable to create new connection using SAP Business One

    Hi all,
    I am unable to make a connection using the new SAP Business One connetion provided with the 8.8 release of SAP Business One Crystal Report Integration Package.
    There are no Companies available to select from.  When I try to manually type in the company name, the logon fails.  If I then press "Cancel", I get a message that Crystal reports encountered a problem and needs to close.  The details of the error refers to the following DLL: crdb_b1.dll.
    The connection is successful from another PC that only has the Client installed (and uses the License server on our server, which also contains the databases.)
    I have a local installation with my own license server.  I am not even able to connect to the database on my local PC.
    Please can anyone explain why this isn't working?
    Regards,
    Rikard

    Hi Rikard,
    You may get better help if you post your question to the Business One forum. I can' t move your post.
    Thank you
    Don

  • XL Reporter error Unable to Connect to SAP Business One DI API

    Hi Experts,
    Im getting this error on one of our clients' workstations.
    They have SAPB1 2005A PL 31.
    We've tried uninstalling and reinstalling the DIAPI and the whole client application as well.  Same error.
    It als gives an error after the initial error that says:
    "Security Settings in Microsoft Excel prohibit XL Reporter from running."
    Any suggestions?
    Thanks!

    hi jairus,
    To fix this XLR error 'unable to connect to SAP Business One DI API', do the following:
    1. Go to control panel and uninstall SAP DI API
    2. Run %temp%
    3. Rename the folder SM_OBS_DLL
    4. Go to the patch level package of the patch level you are using and install DI API. If you get a message that the installation already exists, ignore the message and proceed to install DI API.
    XLR should work properly.
    Best Regards,
    David

  • Error Starting XL Reporter - Unable to connect to SAP Business One DI API

    Hi Experts,
    I am getting the error message...
    Unable to connect to SAP Business One DI API
    [SAP Business One DI API]
    Internal error (-8006) occurred [131-183]
    ...when trying to start XL Reporter on one client PC.  Until today, it has been working OK.
    What needs to be done?
    Thanks
    Greig

    Hi Gordon,
    I thought that might be the answer.  Are there any set instructions for a 'clean' client uninstall?
    Thanks
    Greig

  • DI-API Error Company Connect with SAP BUSINESS ONE 2004 - B 7.30.215

    Hi,
    I am using SAP BUSINESS ONE 2004 - B 7.30.215. But in the COM window of the Visual Studio.net is having only
    SAPbobsCOM 6.2 and 6.5.
    While executing the DI connecting program It is showing an error
    the error is -2028 (without description)
    I need to add any patches to connect to company?
    help me..
    Regards,
    Jay

    Hi Jay,
    Here's a post that also refers to the same question you asked.
    Need Help in DIAPI
    Is your problem with the connection? Have you tried to connect using the Data Transfer Workbench? Where do you get this error -2028? Please post your code so we can see what the problem is.
    Adele

  • Cannot connect SAP Business One with iPad

    Hey all,
    I am new to SAP Business One. And i am exploring SAP Business One Mobile Applicaiton for iPad.
    I've tried to follow the step to set up my both SAP Business One and iPad but failed.
    The message "Connecting to server" keep loading and after few minutes show me "Tje request timed out (-1001)"
    So am I did something wrong? Or miss out something?
    Please advice with this problem.
    Thank you.
    Regards,
    Wai Leng

    Hey Lisa,
    Yes, I've tried what I found in this forum and the Support Portal.
    But it's is failed again.
    As iPad doesn't really need a mobile phone number, so i just simple key in a number for both SAP B1 and my iPad. Is it any problem?
    Another question, I've tested my connection for B1D1, but failed, following is the error message.
    com.sap.b1i.adapter.dia.exception.ConnectionFailedException: Connect to Business One failed.
    (-107) Unable to connect with the specified username and or password
    Anything i miss out?
    Thank you.
    Regards,
    Wai Leng

  • SAP Crystal Reports data source connection problem using sap business one

    Hi,
    I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
    I am trying to create a Crystal report but when I try to configure a new connection it does not work.
    I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
    Our Current SAP related software details are as follows:
    OS: Windows Server 2008
    SAP B1 Version: SAP B1 9 (902001) Patch 9
    SAP Crystal Report Version: 14.0.4.738 RTM
    Database: MS SQL Server 2008 R2
    I have also added some screenshots of the issues.
    Please have a look and let me know if you have any questions or any further clarifications.
    I m eagerly waiting for a quick and positive reply.

    Hi,
    There is problem with SAP Business One date source.
    I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
    So, try to use OLEDB.
    Regards,
    Amrut Sabnis.

  • Error Connecting SAP Business One and Crystal Report

    Hi All,
    I installed Crystal Report 2008 on my system for creating a report in Crystals.
    I clicked on "New Report" and it opened a window called "Database Exert." However, when I look in the Database Expert, I cannot see "SAP Business One" in it. How can I connect SAP Business One 8.8 with Crystal Report?
    Regards,
    Bharath S

    Hi
    On your computer, locate the Crystal folder according to the following directory path: C:\Program Files\SAP\SAP Business One\Crystal. Then double-click the file: SAP Business One Crystal Report Integration Package.exe. and follow the step of the setup status screen.
    Regards
    Christian Carrasco

  • There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

    Hello,
    I have an issue with connecting client SB1H on Windows, the scenario is as follows:
    1.- Server:
         Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
         NDB and Server are review 69 SP06
    2.- Client:
         Windows 8 Pro Virtual Machine on Microsoft Hyper-V
         SB1H PL 11 version 32bits    
         SAP HANA Studio version 1.0.60
    When I run SB1H the following message appears:
    There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
    Any idea what could be the solution?

    Hi,
    Please check SAP notes:
       1993392 - Server components setup wizard: New default values for certificates and single sign-on option
    1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
    Thanks & Regards,
    Nagarajan

  • Not able to get Form 16 A (SAP Business One 8.8 Version)

    Hi all,
    I am not able to get Form 16 A, after giving necessary information in Form 16 A Selection criteria screen (after posting  Outgoing payment for vendor and Govt authority), then system opens another window  u201CForm 16 A reportu201D  and clicked u201Cgenerate certificate nou201D , but not able to view form 16A.
    system is throwing a message "No certificate number marked to any invoice included in this form",
    where to mark the certificate number in the invioice?
    In BP master under accounting , tax subtab, for Subject to withholding tas there we have a feild for certificate no, update this feild also the same system mesaage is popping up
    Is there any other process to view?
    Am working on SAP Business One 8.8 (8.80.229)  SP: 00  PL: 10
    Can anyone help how to get Form 16 A
    Thanks
    Kumar
    Edited by: kumar on Jun 29, 2010 1:11 PM
    Edited by: kumar on Jun 29, 2010 1:12 PM

    Hello Dear,
    After posting outgoing payment and payment of TDS on TDS account,Update the challan entries.
    You can get the update challan entries form under Financial --CXS-TDS.
    After that open the Form 16 A form you will get the report.
    Thanks,
    neetu

  • How  to get  the  Save  dialouge box  in   SAP Business One

    Hi,
    How  to get the  Save dialouge box in    Button  click  event  in  SAP Business One.
    Thanks,
    Y.

    Hello,
    You would like to display an SaveFileDialog box?
    may follow this thread, and you can find a sourcecode in vb.net and c# inside (for open dialog, but it is the similar...)
    Regards
    János

  • Fail to connect DB via DI-API on SAP Business One 9.0 for HANA

    Hi,experts.
    I am coding a sample program using VB.net on SAP Business One 9.0 for HANA.
    But this problem fail to connect DB.
    The code relevant to connect DB is below.
    ============================================-
    SAPbobsCOM.Company.DbServerType = 6
    SAPbobsCOM.Company.Server = ServerName:30015
    SAPbobsCOM.Company.UseTrusted = False
    SAPbobsCOM.Company.DbUserName = SYSTEM
    SAPbobsCOM.Company.DbPassword = ********
    SAPbobsCOM.Company.CompanyDB = CompanyDBName
    SAPbobsCOM.Company.UserName = manager
    SAPbobsCOM.Company.Password = ********
    ' Connecting to a company DB
    RetCode = SAPbobsCOM.Company.Connect
    ============================================
    (Result)  RetCode = False
    (Expected result) RetCode = True
    I think this is a commonly difinition on SAP Business One for HANA.,
    but I can not find any useful information...
    Could you give me advice about this problem?
    Best regards,
    Yuka Masuda

    Thank you for your reply, Maik.
    I changed DbServerType from 6 to 9,
    and the program works!!
    I appreciate your useful information.
    Thank you.
    Best regards,
    Yuka Masuda

  • Wrong User name or Password while connecting from SAP Business One - PL26

    I have restored my database on the server.I am using Patch Level PL26
    I am getting an error while logging to Server
    Wrong username and password....Message [131-93]
    Is it because i have not imported the Temporary Liscence.But when i work on my laptop, it doesnt give me an error with the same username and Password.
    I have checked SAP B1 Suite Service Manager also......it is "ON".
    Can you please give me an help on this issues, why is it giving this error
    OR
    Is there a problem in my SAP Business One Server installation
    Steps i have followed to install the SAP Busines One Server
    1 - PL26 - Packages - Server Tools - Setup
    2 - SAPB1 - Packages - Server - Setup (Custom - Demo-India
    3 - Client - setup
    4 - PL26 - Packages - DIAPI - Setup
    Not installed -
    5 - Packages - Upgrader Common - Setup
    Reason - I have been told that until and unless you import liscense, you cannot run Upgrader Common Setup.
    Please if you can find out is this true ?
    Is the problem coming because i have not run the Upgrader Common setup ?

    Hi Khimesra,
    Could you please try the following:
    1 - Firewall/antivirus disabled                                   
    2 - B1 uninstalled                                                
    3 - Net 1.1 installed                                            
    4 - B1 reinstalled                                                
    Please also refer to the following SAP notes:
    546344 and 542690
    Regards
    Emanuel

Maybe you are looking for

  • Can I save music from my itunes macbook to my iphone/ipad mini via home sharing?

    Or can you only play it in your home with the home wifi? When I plug my ipad into my Macbook an error message comes up "The ipad cannot be used because it requires iTunes version 10.7 of later. My Macbook is running itunes 10.6.3 and won't seem to ac

  • Work manager using thread.sleep or delay doesn't work

    Hi all, I used Spring framework and oracle weblogic 10.3 as a container. I used workmanager for manage my thread, I already made one thread that managed by workmanager. Fortunately spring provide the delegation class for using workmanager, so I just

  • 30 GB Battery LIfe when REcording

    I get about 2 hours of battery life on a fully charged 30GB iPod when recording using iTalk. Is this the best anyone else is getting? What are alternatives for recording lectures with greater battery life?

  • Enhancements in Program SAPMV60A

    Hi! We' re running SAP R/3 4.7 Enterprise and would like to place some custom coding in program SAPMV60A after a new invoice has been persisted in tables VBRK and VBFA, which is done within function module RV_INVOICE_DOCUMENT_ADD via call of FM RV_IN

  • IPhoto Sharing with iCloud

    Hi, I followed the instructions to use iPhoto on my IMac. There's a problem with IPhoto. On the iCloud pages, it's written that I must update IPhoto. But it seems that my iPhoto 11 is up to date. When I go to iPhoto, there's no way I can see ICloud t