Get Started with GUI Programming

I've programmed simple GUIs myself, but I hear there are good packages out there that produce decent interfaces. Where can I find more info about them? Are there any texts you recommend to go with them?
Thanks

Hmmmm. Good packages.
I think you mean an IDE. That stands for Integrated Development Environment. IDE is the keyword you want to plug into the search box above.
Here is what searching IDE produced:
http://search.java.sun.com/search/java/index.jsp?col=javaforums&qp=%2Bforum%3A54&qt=IDE&x=10&y=6
Lots of good reading there.
Cheers!

Similar Messages

FAQ: Common Lightroom workflows, or How do I get started with this program?

Starting to use a new application can be intimidating, especially one as sophisticated as Lightroom. Here is a handy list of resources to help you with your Lightroom workflow:
Getting Started Tutorials
10 Things Beginners Want to Know (Video, 36:28) from How to Get Started with Lightroom 4 with Terry White
How And Why You Should Use Adobe Lightroom
Beginners Guide on How to Use Lightroom 3
Photoshop Lightroom Tutorials Roadmap
A wealth of Lightroom tutorials (John Nack)
The Official Lightroom resource center
The Lightroom home page
The Lightroom 4 Users Guide
Continually updated resources
Learn Photoshop Lightroom 4
Learn Lightroom 4 Channel on Adobe TV
Julieanne Kost's Lightroom tutorial videos
Lightroom tutorials on Photoshop.com
Layers Magazine Lightroom Tutorials
Lightroom Killer Tips
Additionally, check out the rest of the Lightroom FAQ.
Follow Lightroom through social channels to receive a constant stream of tutorials:
Facebook
Google+
Twitter
YouTube (Check out the Getting Started with Lightroom series of videos)

contact adobe support, http://www.adobe.com/support/chat/ivrchat.html

Getting started with 3850 as WLC - Wireless GUI fails

I have started to look into configuring our 3850 as a WLC
I enabled the command wireless mobility controller
Then I tried to connect to <switch ip>/wireless
I just get a dead page.
I configured the wireless management vlan but still no joy
What basic steps am I missing?
Thanks
Roger

1. Make sure this are aenabled on this:
ip http secure-server
ip http server
2. Also Enable WIreless Management
3850(config)#wireless management interface vlan <1-4095>
3. Normally You can access wireless controller GUI using https:///wireless URL.
Please check these docs, it may helps.
https://supportforums.cisco.com/docs/DOC-34430
http://mrncciew.com/2013/09/29/getting-started-with-3850/
Please go through these, u will resolve ur problem.
Regards
Dont forget to rate helpful posts

Java Applet HelloWorld "Getting Started With Applets" example not working

Hi there,
It's been ages since I ran my Linux CentOS boot of Linux but I am going through the official oracle java applet tutorials, just every time I try and run the "Hello World" applet in Firefox 17.0.3 and I am running the Iced Tea thing for java applets.
Every time I try and run the example from the following code:
import javax.swing.JApplet;
import javax.swing.SwingUtilities;
import javax.swing.JLabel;
public class HelloWorld extends JApplet
// called when the user enters the html page:
public void init() // keep apps within the init() function very small as per the http://docs.oracle.com/javase/tutorial/deployment/applet/appletMethods.html
    try{
      SwingUtilities.invokeAndWait(new Runnable()
        public void run()
       JLabel myLabel = new JLabel("Hello World");
       add(myLabel);
        } // end running the application
      }); //end of swing invokeand wait
    } catch (Exception error){ // end user running the app in page
       // System.err.println("GUI didn't work on initial run");
}It keeps bringing up the error "Start: Applet not initialized" I did google that basic error and from what I found I should consult the JavaConsole, I know the console was removed from the Firefox menu quite a while ago. So went to find a way of loading it using the IcedTea one but it keeps bringing up a load of errors in even trying to run that.
Is there anyway of sorting this out? I mean I have even tried installing the one on the oracle website, the plain JDK but nothing seems to work.
Is there anyone that can help me get applets working? I was even going to go as far as to reinstall my distro but I want to avoid that as much as possible.
Thanks and I look forward to any replies,
Jeremy.

in the Getting Started with Java DB tutorial they
tell u how to set ur "DERBY_HOME" (what is that?).
once i press enter after typing this command:
set DERBY_HOME=D:\Java\Java
Phonebook\javadb in my command prompt do i get
any message or does it just go to the next line?type env or set or whatever in the command line to see what your environment variables are set to
they also tell u how to set ur "JAVA_HOME" (what is
that?). The Java installation you want to use
in their example they give u this: set
JAVA_HOME=C:\Program Files\Java\j2se1.4.2_05but in my java folder i have jdk1.6.0 and jre1.6.0
but no j2se1.4.2_05, so which 1 must i choose?It's up to you. I'd go with 1.6
also once ive done this: set
DERBY_HOME=D:\Java\Java Phonebook\javadb this
set JAVA_HOME=D:\Program
Files\Java\jre1.6.0 and this set
PATH=%DERBY_HOME%\bin;%PATH% and then type
sysinfo to verify that the variables were set
correctly i get these errors: 'D:\Java\Java' is
not recognized as an internal or external command,
operable program or batch file and '""'
is not recognized as an internal or external command,
operable program or batch file any help would
really be appreciated because this is really killing
me!you need to set your path variable - so something like:
set PATH=C:\Program Files\Java\j2se1.4.2_05\bin

Can not get example to work after following instructions given in "Getting Started with the NI LabVIEW C Generator" guide

We explored using sbRIO for our project, for different reasons we ended up going with a different embedded solution . We are currently evaluating the LabVIEW C Generator to convert some of the core analysis routines from LabVIEW to C so the team that will be creating the embedded solution don't have to re-implement them from scratch.
Before converting our code, I followed the instructions given in the "Getting Started with the NI LabVIEW C Generator" manual to create a static library created inCygwin using GNU Compiler Collection (GCC).
I managed to compile the code, but when I type "run GCD.exe" in the Cygwin console, I just see the window flash with no time to see if the result is correct or not. I modified the main.c cde to add a getchar(), but the window still just flashes and now I am left with the GCD process still running and have to kill it using Windows Task Manager.
Has anyone else got this example to run? I am sure I am missing an obvious setting or step, please help me.
More details below.
Thanks,
Fab
Here is a video showing the steps I followed
If you don't want/can't see the video. Here are some screenshots of what I have done so far:
GratestCommonDivisor.lvproj C Generation build specs Information:
C Function prototype definition:
I copied Makefile located at: C:\Program Files (x86)\National Instruments\LabVIEW 2011\examples\CGenerator\Tutorial\Cygwin
and replaced both Makefile and Makefile.cygwin in the directory where the C code was generated
I also copied main.c from the same location and replaced the one generated
Here is the snapshot of the results after executing "make GCD.exe"
Then to run it I just type
I see a window open and close really quickly and I never see the result. I have tried adding the getchar() line to the main.c file, but still I don't get to see the results.
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion

Hi Kevin,
I hope you had a good Thanksgiving. I am attaching a zip file with the LabVIEW project, my build specification and my version of "Greatest Common Divisor.vi", which should be the same as the one that you have that ships with the LabVIEW C Generator, but just in case. I am also attaching a zip file with the C files generated by the LabVIEW C Generator.
You can also see the video I posted earlier with the steps I followed. I hope you are able to point out where I went wrong.
Thanks,
Fab
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion
Attachments:
GreatestCommonDivisor.zip ‏8 KB
CGen Files.zip ‏71 KB

Getting started with an iBook G3?

Hey,
I just got an iBook G3 (500mhz, snow, airport, 10gb hd, upgraded ram), to compliment my iMac (G5 rev c) and I'm a little new.
It was used, I got it via trade.
Does anyone have some tips for me to get started with it ? I'm wanting to upgrade the HD to at least 20 GB, and to max out the ram. Any hints on that ?
Also, where can I get a new battery and charger ?
Also, what else should I know about it ?
It will mainly be used for writing (novel, fan-fics), surfing the web (wirelessly), and when I'm traveling...
Oh, it has OSX10.2 installed.

Hi, Josh. Welcome to Apple Discussions.
How much RAM is installed?
Does it have the original AirPort card installed? (You may want to install one, if not, to enable wireless access to the internet.)
Did the original system CD's and the OS X 10.2 software CD's come with it? If not, try to get the person you got it from to give them to you. You will need them if you intend to upgrade the hard drive (and for maintenance, even if you don't upgrade the hard drive).
Hard drive upgrade services:
MCE Technologies
DT & T Computer Services
A hard drive upgrade is very complicated, and best left to a professional.
Check out the procedure:
http://www.pbfixit.com/Guide/50.12.0.html
http://www.powerbooktech.com/knowledge,name-Hard-Drive,type-6.htm
http://uk.geocities.com/ibookupgrade/
http://sterpin.net/uk/ddibookdualuk.htm
Hard Drives:
Other World Computing
Newegg
Batteries:
http://www.powergears.com/product.php?catID=1100&p=1
http://www.computergiants.com/items/one_item.asp?part=71148&cat=99&subsubcat=115 2
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M93 37G/A
http://eshop.macsales.com/item/Newer%20Technology/BAPIB111V36/
http://eshop.macsales.com/item/Newer%20Technology/BAPIB111V48/
Adapters:
I have found the following options for replacing a white iBook power adapter:
http://www.macresq.com/store/detail.php?prodID=P009141
MCE Technologies
http://www.madsonline.com/index.html?
adapter at Other World Computing
Apple's is the only one with the glowing ring, though, and is found here:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M89 43LL/A
Enough dual USB G3 iBooks suffered from a logic board problem that Apple began the iBook Logic Board Repair Extension Program in January of 2004. Check out the FAQ page and be aware of how this logic board problem manifests itself.
It has been suggested that you can minimize the chance of a logic board failure of this sort by never picking it up by the front left corner alone. Pick it up with both hands or in the center under the trackpad.
It's also a good idea not to close it any more often than you need to in order to minimize the chance of the backlight cable (and other cables and wires) becoming pinched in the hinge or broken. When you have some time, check out the Discussion thread in the Displays Forum entitled 90 degrees and black out!!!!
Information on using the battery to maximize both life and lifespan can be found here.
You can download the manual for the iBook (Dual USB) from this page:
http://www.apple.com/support/manuals/ibook/
Good luck, and happy iBooking!

FAQ: How do I get started with Photoshop Elements Editor, or What do all these tools do?

Opening an image editing application for the first time can be intimidating. The more powerful the tool, the more complicated it can be to learn to use. Below are a list of resources to help you get started with the Photoshop Elements Editor.
I just bought Photoshop Elements, where do I start?
There are a lot of directions you can go when you first make your purchase. Here is your first roadmap.
Getting Started Tutorials
What do all these terms mean?
There are some common words tossed around when talking about image editing or tool use. Here is a helpful guide to define these: Photoshop Elements key concepts
Photoshop Element Help Topics:
Workspace basics
Tools
Color and tonal correction basics
Elements Basics, an overview of Elements' essential concepts on Photoshop Elements User.com
Where can I find some tutorials on the web?
There are many resources for learning Photoshop Elements on the internet. Here are some that we recommend.
Photoshop Elements: Where can I find some good basic tutorials? on the Photoshop Feedback site.
Like Photoshop Elements on Facebook for daily tutorials and inspiration. As well as the occasional contest.
Editing Tutorials for Photoshop Elements on Photoshop.com
Getting Started with the Elements Editor on Photoshop Elements User.com
Photoshop Elements for Dummies.com
What about video tutorials?
Some find it easier to watch a product being demonstrated and explained by an expert
Learn Photoshop Elements 11 on Adobe TV
Photoshop Elements channel on YouTube
Where can I find books about learning Photoshop Elements?
Photoshop Elements books on Pearson Peachpit Press

Hi Christoph and WarriorAnt,
Thank you both for the replies.
I don't know anything about GarageBand because I've never used it. I've never used any music software before, (other than iTunes, Ha!)
I don't have GarageBand on my Mac because it wasn't stock on the old Powerbook G4, so I would have to buy it. I'm happy to do that if I can figure out that it does what I want ... but I'm overwhelmed by the info at Apple's site. Too much for a beginner like me. Even the wikipedia.com entry for GB uses too many terms I don't know, so I'm easily lost.
I just want to be able to set up drum loops and play along with them. The main thing is that I'm able to use third party loops. There are so many really amazing loop products out there ... jungle drums, acoustic jazz drums, lounge, etc. I don't want to get caught up in anything proprietary (like Band-In-A-Box) because the selection is limited. I'm sure GarageBands loops are great, but I want access to all these other third party loops as well ... loops that were not specifically made for GarageBand.
Will GarageBand let me drop in any and all drum loops from these other companies?
And does GarageBand work like a basic sequencer, where I can program up an intro, X number of measures of a loop, then a turnaround, then a variation loop, then an ending, etc?
I know the high-end stuff like Native Instruments Kontakt does this, but unfortunately it also does a kazillion other professional-level things I will never need and don't want to pay for (and which make the software more complex and daunting).
Thank you again, both of you, for responding and helping me with this project.
Just a little more advice on those two questions would really go a long way.
-JOHN

Getting Started with Swept Sine (DAQmx) Multiple Response Signals

Hi,
I've been using the modified version of the Getting started with swept sine.vi for multiple response signals
https://decibel.ni.com/content/docs/DOC-24474. Program fully suitable.
However, I am facing with three issues :
1) The edits are highly non user friendly (horrible for 6 multi-channel already), and quite long to perform.
2) Would there be a way using for loops to have a more compact and flexible way to use FRF? (Calling 6 times the same program in a similar structure does not quite seem like a smart move yet I'm relatively novice in LabVIEW).
3) Be able to set the number of channels somewhere in the software, and automatically have the software to be able to cope with this? (aka if 20 multichannels are needed, no need to modify the code?)
It's probably going to be a lot of work to get there, all I'm asking for you guys is to point me in the right direction and suggestions,
Cheers,
Kentmey
Kentmey

duplicate post, continue here…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Problems getting started with templates

I am just getting started with the dreamweaver 30 day trial.
I am trying to create my first file. When I try to open a new
template file I get the message below-
"Dreamweaver stores templates in the root folder of a site,
but there are no sites defined. Please add a site"
What does this mean? How do I find the templates? I am a
total dreamweaver newbie trying to learn the program.
Thanks

ntmunger wrote:
> I am just getting started with the dreamweaver 30 day
trial. I am
> trying to create my first file. When I try to open a new
template
> file I get the message below-
>
> "Dreamweaver stores templates in the root folder of a
site, but there
> are no sites defined. Please add a site"
>
> What does this mean? How do I find the templates? I am a
total
> dreamweaver newbie trying to learn the program.
>
> Thanks
It's not a problem with templates.
You have to create a site for your website - F1 will show you
how to do
that. Once you have a site created, you will be able to
create new template
files, and they can write themselves to the correct part of
the site.
HTH,
Pete.
Peter Connolly
http://www.acutecomputing.co.uk
Derby
UK
Skype ID: acutecomputing

Getting Started with Wireless: Wireless configuration on 877W router - STUC

Just letting you know that I've already posted an identical post under "Getting Started with Wireless" but don't feel that I'm getting any attention so I made another post. Thank you.
Hi all
I have a Cisco 877W router running IOS v 12.4(15)T3. Have been trying to configure wireless to run WPA-PSK and is stuck at the final stage. Spent a lot of time configuring the router using CLI but ended up using the Web GUI interface. I was able to configure the wireless settings (I think) but failed when connecting to the router from WinXP-SP2 and was wondering if you have any suggestion for me. I've ran the following debugs on the router:
VNRouter#sho debug
DHCP server event debugging is on.
dot11:
802.1X module WPA/WPA-PSK/CCKM key management debugging is on
dot11 Syslog debugging is on
Below is the error message when connecting wirelessly
*Mar 4 18:46:25.655: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded
VNRouter#
*Mar 4 18:46:25.659: %DOT11-6-ASSOC: Interface Dot11Radio0, Station VNRouter 001b.771a.dbad Associated SSID[VN-WiLess1] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
VNRouter#
*Mar 4 18:47:25.571: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded
*Mar 4 18:47:25.575: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded
*Mar 4 18:47:25.575: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded
*Mar 4 18:47:25.579: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded.
I've created two VLANs (and tied these two vlans to 2 separate SSID) on this router for a reason and so far has not been able to connect to any of them (SSID). I've also attached the config so you can have a look. Thanks in advance for your help.

The configuration looks fine. In most cases, the connectivity issues with WPA-PSK is due to the mismatch in PSK on the Client and the AP. Try re-entering the PSK key on both the router and the client and check if you are seeing any issues.

Getting started with SAP Netweaver

Hi there,
I am an IT professional with 7 years of development/project management experience in MS technologies.
I want to learn SAP Netweaver, but very new to SAP!
What is the Pre-requisite to learn Netweaver? Should I know ABAP to get into the Netweaver platform?
Please advice me and provide some useful materials to getting started with Netweaver.
Thanx.
Aslu

Hi Aslam,
there was a recent thread about a similar question of yours, please check out First time in SAP Netweaver
There are so many NetWeaver components so your question is a bit hard to answer.. But if you want to keep on programming, you really don't need ABAP much. NetWeaver is mostly about Java (Web App Server & Enterprise Portal programming), but you have touching points to both .NET and ABAP.
Hope this helps,
-Mikko

Getting Started with 9iAS Wireless

I installed the 3 CDs for 9iAS and when I look at my inventory for installed Oracle products I see that 9iAS wireless is installed, however I can't find any documentation, links or admin programs that help me get started with it. I have a WAP emulator and I want to write applications in PLSQL in the XML format, however it rejects them claiming that the page is HTML and not accepted. What do I need to do to write applications in PLSQL that will work on a WAP enabled device.
Thanks

You can find documentation to Oracle9iAS Wireless Release 2: http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/wireless.htm
In the Getting Started and System Guide, you can find a walkthough of the product: http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/wireless.902/a90486/pags.htm#1005603
Additionally, here is a link to a hosted version of Oracle9iAS Wireless called the Mobile Studio: http://studio.oraclemobile.com. This has infrastructure set up so you can easily access your application through voice, SMS, any mobile browser...
Hope this helps,
Kalle
[email protected]

Getting Started with BT Vision - FAQs

If you need some help getting started with BT Vision, check out our videos for information about how to install Vision yourself. Or if you fancy reading rather than watching, you can get the manuals here.
Lots of information on BT Vision can be found at www.bt.com/btvision
Don't forget to also check out our Vision Video of the week.
Functions and Features:
For technical information, and details of how BT Vision connects with other TV equipment such as video recorders and DVD players, check out our help pages.
How do I program my BT Vision remote control? The instructions for programming your BT Vision remote differ slightly depending on what model you have. Check out the link for more info.
Freeview on BT Vision:
Find out how to improve your reception and image quality on BT Vision with our handy video guide.
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Hi Folks,
I am tidying up our sticky threads so have decided to archive a few more. The links of the Sticky threads that I am archiving can be found below, just encase you want to view these again.
New IP Channels - 28-02-2014
System update on June 23rd - Problems with accessing or playing on demand programmes - 20-06-2014
System update on June 24th - Problems playing On Demand programmes - 20-06-2014
Temporary issue with BBC iPlayer - Issue resolved - 21-07-2014
Problems receiving local TV Channels - 24-02-2014
Sky Sports 5 launch on Vision+ box - 11-08-2014
National Freeview Retune - 3rd September 2014 - ‎01-09-2014
BT Vision - Fresh New Look - 11-09-2014
ITV Retune on Monday 2nd February - 30-01-2015
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Getting started with the BC Open Platform

Hey BC partners,
Welcome to the BC developer forum!
To get started, just visit http://developers.businesscatalyst.com/ (username: alpha, password: bcdevdocs) and follow the Getting Started tutorials. This is a dedicated developer documentation site which includes information on how to register and create an app, links to API endpoints, modules and tag references and sample apps.
Here's what you should do:
Go to http://developers.businesscatalyst.com/getting-started/ and have a look at the introduction pages
Sign up as a developer and register your app, by clicking the "Create an App" button on the top right part of the screen: http://developers.businesscatalyst.com/getting-started/register.htmlNOTE: For now, all requests are manually reviewed and approved, it might take a couple of days for your app key to be sent
You'll receive the app key over email, or further clarifications, if needed.
While your key is generated, follow these steps to create a "Hello World" sample app on your site: http://developers.businesscatalyst.com/getting-started/building-your-first-app.html#hello_ world
Once you receive the app key, you can start building your app: http://developers.businesscatalyst.com/getting-started/building-your-first-app.html
Here's another sample app and instructions on how to use it and understand how it works: http://developers.businesscatalyst.com/samples/meet-the-team-app.html
Other useful developer resources:
Customizing the Admin Console menu using an app: http://developers.businesscatalyst.com/developer-documentation/customize-admin-menu.html
Get started with the Business Catalyst APIs: http://developers.businesscatalyst.com/developer-documentation/api-reference.html
API endpoints reference: http://docs.businesscatalyst.com/content/api-endpoints/index.html (username: alpha, password: bcdevdocs)check out the new Authentication, FileSystem and the webapps/webapp items APIs
The bcapi.js SDK - http://adobebc.github.io/bcapi.js/index.htmland how to use it: http://developers.businesscatalyst.com/developer-documentation/sdk-reference.html
Best practices when developing apps: http://developers.businesscatalyst.com/developer-documentation/best-practices.html
Within the next few months our team will continue to develop these features with the help of the Beta Group, and then open the development program to all partners of Business Catalyst.
We hope that you are just as excited as we are to embark in this new direction for Business Catalyst, and shape the future of the platform.
If you run into any problems or have any questions, start a new discussion on this forum
Enjoy,
The Business Catalyst team
P.S: Make sure to sign up to receive email notifications from this forum - by going to http://forums.adobe.com/community/business_catalyst/developer_forum and clicking "Follow this forum" in the Notifications pod on the right side of your screen.

Hi,
Although I'm learning I am a complete programming / javascript / json / jquery novice so my apologies in advance if this is a stupid question or i have failed to understand the new restful api functionality which is available under this beta.
In the past, where a client has had really specific functionality that was not achievable within the BC framework, I have implented an external php application (with the help of a web developer) and simply linked to it via a sub domain. Obviously not ideal.
My hope is that the new api functionality will open up a range of possibilities that will go some way toward eliminating the need to build extenal applications and simply extend the existing BC framework using the added api functionality.
One example that i would like to move solely on to BC is the following - http://mylist.grocerwatch.com.au/
The above is a grocery pricing comparison website whereby the applicaton highlights the cheapest and best value (comparible) products. The application also allows the user to select from the items displayed to create a shopping list showing where to buy the selected products for the best value. The user can also email, print, or save their shopping list.
My question is for someone who is more farmiliar with the new api and who is perhaps more experienced than me with programming. Would it be possible to create the above solely on BC without sacrificing speed, security, functionality etc?
Thanks.

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

Labview isn't cheap, but it would certainly allow you to build a program (set of vi's - virtual instruments) that would do what you describe. Where would the timecode information come from? Your vi, or program, would: Start up, initialize the serial port, loop until a trigger happened, read the timecode (from where?), output that timecode out the serial port in a loop until you pressed the stop button. There is a free evaluation of Labview software available from NI - the base product itself runs about $995.
- Dave

Get Started with GUI Programming

Similar Messages

Maybe you are looking for