Get subtypes from HR_F4_GET_SUBTYPE

Hi.
We are on the latest version of SAp wherein subtypes are fetched using the Badi HR_F4_GET_SUBTYPE.
The doc seems to suggest that we can have our own coding for implementing any infotypes' subtypes.
But when I try to make an implementation for a standard infotype for which standard implementation already exists (HR_GET_SUBTYPE_T591A), I am unable to activate it saying that "implementation already exists".
How do I then get my own values for subtypes for a standard infotype like IT0006?
I don't intend to change values in T591A directly.
any suggestions would be highly appreciated..
tks.
Samant

We can create our own subtypes usng View V_T591A. The updated values show up in HR_F4_GET_SUBTYPE.

Similar Messages

Get data from more than 1 subtype using RP_PROVIDE_FROM LAST

Hi all,
I need to get data from infotype 2013 subtype 90 and subtype 91.
Currently the codes only allow me to use it one time for the same infotype. If I use it again for the same infotype, pnp-sw-found will equal to zero. Anyone have any idea on this?
Example:
Get pernr.
Start of selection.
rp_provide_from_last p2013 0090 pn-begda pn-endda.
IF pnp-sw-found = 1.
**--> Populate internal table
    MOVE p2013-ktart TO ls_quota-ktart.
    MOVE p2013-aedtm to ls_quota-aedtm.
    MOVE p2013-uname to ls_quota-uname.
    MOVE p2013-accnu to ls_quota-accnu.
    MOVE p2013-accop to ls_quota-accop.
ELSE.
    REJECT.
ENDIF.
End of selection.

Using RP_PROVIDE_FROM_LAST you can only use for one infotype and one subtype. For reading data for IT2013 with subtypes 90 and 91....you have to use following....
Get pernr.
Start of selection.
rp_provide_from_last p2013 0090 pn-begda pn-endda.
IF pnp-sw-found = 1.
**--> Populate internal table
    MOVE:
           p2013-ktart TO ls_quota-ktart,
           p2013-aedtm to ls_quota-aedtm,
           p2013-uname to ls_quota-uname,
           p2013-accnu to ls_quota-accnu,
           p2013-accop to ls_quota-accop.
ELSE.
rp_provide_from_last p2013 0091 pn-begda pn-endda.
IF pnp-sw-found = 1.
     **--> Populate internal table
     MOVE:
           p2013-ktart TO ls_quota-ktart,
           p2013-aedtm to ls_quota-aedtm,
           p2013-uname to ls_quota-uname,
           p2013-accnu to ls_quota-accnu,
           p2013-accop to ls_quota-accop.
   ELSE.
       REJECT.
   ENDIF.
ENDIF.
End of selection.
Hope this answer is helpful

Strange message when removing subtypes from IT1002 for OM

Hi,
We need to remove some of the subtypes for IT1002 that show up in OM. Or rather - we need to differentiate subtype by object type (as is done by SAP).
The only way I have found how, is to remove the subtypes from T777Z under the time constraint view for IT1002.
However, when I try to delete a row, I get the message: "Documentation was deleted. Continue?".
This message worries me a little. So my questions are:
1. Is this the correct method for removing subtypes from different object types in OM?
2. What does the popup message mean, and do I need to worry about it?
Any suggestion appreciated
Best regards
Kirsten

Hi,
The correct way is through transaction OOSU or IMG path: SPRO>Personnel Management>Organizational Management>Basic Settings>Data Model Enhancement>Infotype Maintenance>Maintain Subtypes
If you try deleting from here, you will not get that confirmation box. Iu2019m not sure what it means but looks like itu2019s trying to delete the object itself. Youu2019ll see u201Cdelete an objectu201D in the title bar of that box.
Hope this helps.
Donnie

HT1349 How do you get help from apple if you don't know where to find the serial number of my "product." I don't know if they mean my itunes program, my iphone, my computer, which one, the number on the computer (is there one), or something in Windows or

How are you supposed to get help from Apple if you don't know what your serial number is? They say to input the serial number of the "product" that you are asking about. Since my problem is how to deauthorize/authorize computers, and they are saying I have more than 5 (which I have never owned more than 5 computers in my life), I can't imagine what serial number they mean. Does it mean your desktop computer? If so, which one? Do they mean your device? LIke your iPhone, iPod or whatever? Do they mean the software ON one of your computers and/or devices? If so, which program, and on which computer/device?
We have three operational computers, one does not have iTunes on it. Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers. See what I mean? I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not. I only know of 2 computers that have iTunes on them, so how can there be 5? We also have 2 iPhones and 2 iPods in this family, but one of the iPhones has his own apple id. He may have been using mine, since his computer died. I read that those don't count as "computers" to the 5. Do they, then?
Help! I can't contact apple because I have no idea what they mean about serial number. I doubt they would help me anyway. In order to get the serial number off my desktop computer (that has iTunes on it already), I will have to move furniture, so I don't want to if that's not it. Is there some way to find the serial number in the software, either on my desktop or my iPhone?

sunshinecowgill wrote:
We have three operational computers, one does not have iTunes on it. Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers. See what I mean? I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not.
You could have more 5 computers authorized if you ever, for example, reformatted a hard drive or replaced a hard drive without deauthorizing the computer first. Apple's system would see that as a different computer, even though you don't. There's nothing to be afraid of in deauthorizing everything and the reauthorizing what you actually have. You won't lose any data. Mistimp is correct, they can't tell you which computers are authorized.

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstorepls help

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstore...pls help as im only a teenager and have no credit credit and my parents dont trust me with theres and they dont care about the fact that you can set up a password/.... PLEASE SOMEONE HELP I WILL BE SO GRATEFUL... And i would really like to get the iphone 4 but if there is no way of etting apps without your credit number then i would have to get a samsung galaxy s3 maybe ...

You can set up an Apple ID without a credit card.
Create iTunes Store account without credit card - Support - Apple - http://support.apple.com/kb/ht2534

Creating Variable with Replacement Path to get value from ANOTHER Variable

Hi all,
    Is anyone has created the Variable with Replacement Path to get the value from another User Entry Variable, PLEASE ?
First created the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next created the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we should get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path for my requirement, PLEASE ?
The following is from help.sap..com:
Replace with Characteristic Value
Text and formula variables with the processing type Replacement Path can be replaced with a corresponding characteristic value. In the variable editor, on the General tab page, you specify under Reference Characteristic the characteristic that is to be referenced by the replacement. On the Replacement Path tab page, you can choose whether the variable is replaced with the From or the To Value and with the Key or the Name of the characteristic value. You can also specify the Offset Start and Offset Length for the output.
Replace with Variable
Characteristic value variables, hierarchy variables, text variables, and formula variables with the Replacement Path processing type can take their values from a different variable.
The following prerequisites need to be fulfilled:
Variable
●      The variable must not be input-ready
●      The variable must represent a single value
Source Variable
●      The source variable must not be a hierarchy node variable
●      The source variable must be input-ready
●      The source variable must be available in the query
●      The source variable must represent a single value or an interval
In the variable editor, on the Replacement Path tab page, you specify the source variable from which the value is to be determined. The value is either determined from the key, the external attribute of the key, the description, or the attribute value. You can specify an Offset Start and an Offset Length for the output here. The variable is replaced on the variable screen upon each data release.
Thanks,
Venkat.

Hi Eve,
It is possible to connect the 2 queries using a Replacement Path characteristic variable. You would need to create the variable on the char whose values you want to pass from Q1 to Q2. The variable will be of type replacement path and you will need to enter the name of Q1 from which it will get the values. Make sure that you include this char in the query definition of Q1 and Q2. In Q2 you will restrict the characteristic using this variable. DO not use this variable (replacement path) in Q1.
In your query properties check if you have turned on the checkmark for Release for OLE DB for OLAP (3rd tab). If the check mark is there, then remove it.
We are using the scenario in a couple of places, and it works very well.
Hope this helps...

In ADOBE BRIDGE CS6 "folder can not be created" appears when getting photos from camera

Has anyone seen this when getting photos from camera in ADOBE BRIDGE CS6?
"Folder cannot be created"

I solved the problem myself.
jwerth2

Can we get data from business views in CR 2008/XI?

Hi All,
Can we get data from business views in CR 2008/XI?
If its possible, pls let us know how to get connect with Business View in both of these versions and what is the tool that we have to use to create Business Views.
Thank you,
Krishna Pingali

Hi Krishna,
Crystal Reports/BusinessObjects Enterprise ( BOE ) Business Views can only be created using the BV build which comes with BOE and installed using the Work Station installer for BOE. for both XI and 2008.
You cannot mix these two versions on the same PC not can one talk to the other, the BV designer must match the same version as BOE. XI ( version 11.0 ) is no longer available but if you mean XI R2 ( version 11.5 ) then it still is.
It's not completely clear which Business View you are referring to? BOE has a Business View Designer so not sure if this is just a naming problem or not? If you are referring to the BOE Business View Designer then the above is true. If your reference is about some other BV designer or data source then you need to clarify.
Contact our Sales department for pricing and availability.
Thank you
Don

Can not get data from mySql

I prepared a GUI user connection application in NebBeans 5.5 accessing mySql database in the company server. The application run very well in desktop.
However, when I post it to the company server web, it gets nothing from the database.
Can any one give advice???
Thank you in advance.
The following is my application
import java.util.Vector;
import java.awt.event.*;
import java.awt.*;
import java.awt.event.*;
public class UserConnection extends javax.swing.JFrame {
//constants for database
private final String userName = "labmanage";
private final String password = "labmanage";
private final String server = "jdbc:mysql://svr.corp.com/labmanage";
private final String driver = "com.mysql.jdbc.Driver";
private JDBCAdapter data = new JDBCAdapter(server, driver, userName, password);
//variables
private String user, pwd;
private Vector<Vector<String>> userTable = new Vector<Vector<String>>();
private Vector<String>colUserNames = new Vector<String>();
* Creates new form UserConnection
public UserConnection() {
initComponents();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" Generated Code ">
private void initComponents() {
userLabel = new javax.swing.JLabel();
pwdLabel = new javax.swing.JLabel();
userTextField = new javax.swing.JTextField();
passwordField = new javax.swing.JPasswordField();
submitButton = new javax.swing.JButton();
statusLabel = new javax.swing.JLabel();
jScrollPane1 = new javax.swing.JScrollPane();
statusTextArea = new javax.swing.JTextArea();
changePwdButton = new javax.swing.JButton();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
setTitle("User's Connection");
setBackground(new java.awt.Color(153, 204, 255));
setCursor(new java.awt.Cursor(java.awt.Cursor.DEFAULT_CURSOR));
setFont(new java.awt.Font("aakar", 1, 12));
userLabel.setText("User Name:");
pwdLabel.setText("Password:");
submitButton.setText("Submit");
submitButton.addMouseListener(new java.awt.event.MouseAdapter() {
public void mouseClicked(java.awt.event.MouseEvent evt) {
submitButtonMouseClicked(evt);
submitButton.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
submitButtonActionPerformed(evt);
submitButton.addKeyListener(new java.awt.event.KeyAdapter() {
public void keyTyped(java.awt.event.KeyEvent evt) {
submitButtonKeyTyped(evt);
statusLabel.setText("Status:");
statusTextArea.setColumns(20);
statusTextArea.setEditable(false);
statusTextArea.setLineWrap(true);
statusTextArea.setRows(3);
statusTextArea.setText("Initial assigned password is \"dime\".");
statusTextArea.setWrapStyleWord(true);
jScrollPane1.setViewportView(statusTextArea);
changePwdButton.setText("Change password");
changePwdButton.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
changePwdButtonActionPerformed(evt);
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(userLabel)
.add(pwdLabel)
.add(statusLabel))
.add(35, 35, 35)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(submitButton)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(changePwdButton))
.add(passwordField, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE)
.add(userTextField, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jScrollPane1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE))
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(userLabel)
.add(userTextField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(pwdLabel)
.add(passwordField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(statusLabel)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(15, 15, 15)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(submitButton)
.add(changePwdButton))
.addContainerGap(27, Short.MAX_VALUE))
pack();
}// </editor-fold>
private void submitButtonKeyTyped(java.awt.event.KeyEvent evt) {
if(evt.getKeyCode() == KeyEvent.VK_ENTER) {
submitButton.doClick();
submitButton.requestFocus();
changePwdButton.requestFocus();
private void changePwdButtonActionPerformed(java.awt.event.ActionEvent evt) {
String command = evt.getActionCommand();
if(command.equals("Change password")) {
passwordField.setText("");
//Get connection to the changing password panel
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new ChangePassword().setVisible(true);
private void submitButtonActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
String command = evt.getActionCommand();
if(command.equals("Submit")) {
user = getUser();
pwd = getPwd();
data = new JDBCAdapter(server, driver, userName, password);
data.executeQuery("SELECT * FROM USERTABLE");
colUserNames = data.getColumnNames();
userTable = data.getDataTable();
if(colUserNames.elementAt(0).equals("")) {
statusTextArea.setText("Can not connect to database");
boolean checkUser = false;
int i = 0;
while(!checkUser && i<userTable.size()) {
if(user.equalsIgnoreCase((String) userTable.elementAt(i).elementAt(0))) {
//Find the user in database
checkUser = true;
//Check user's password
if(pwd.equals((String)userTable.elementAt(i).elementAt(1))) {
//Check for initial default password. The user is requested
//to change his password
if(pwd.equals((String) "dime")) {
statusTextArea.setText("You are requested to change your " +
"initial assigned password. Click 'Change password' please.");
else {
//Set UserConnection Panel to invisible
setVisible(false);
dispose();
//Get connection to the table
if(userTable.elementAt(i).elementAt(2).equals("0")) {
//Get connection to non-editable table
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
PVRackReportNonEdit rackReport = new PVRackReportNonEdit();
rackReport.createAndShowDialog();
else {
if(userTable.elementAt(i).elementAt(2).equals("1")) {
//Get connection to editable table
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
PVRackReport rackReport = new PVRackReport(user);
rackReport.createAndShowDialog();
//PVRackReport rackReport = new PVRackReport();
else statusTextArea.setText("You do not get approval for viewing data. " +
"Please contact the administrator for details.");
else {
passwordField.setText("");
statusTextArea.setText("Please enter corrected password or" +
"the administrator for details.");
i++;
if(!checkUser) {
passwordField.setText("");
statusTextArea.setText("Not find such user's name." +
"contact the admistrator for details.");
private void submitButtonMouseClicked(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new UserConnection().setVisible(true);
public String getUser() {
return userTextField.getText();
public String getPwd() {
return passwordField.getText();
// Variables declaration - do not modify
private javax.swing.JButton changePwdButton;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JPasswordField passwordField;
private javax.swing.JLabel pwdLabel;
private javax.swing.JLabel statusLabel;
private javax.swing.JTextArea statusTextArea;
private javax.swing.JButton submitButton;
private javax.swing.JLabel userLabel;
private javax.swing.JTextField userTextField;
// End of variables declaration
Here is my JDBCAdapter
package rackdemo2;
* This is an adaptor which transforms the JDBC interface
* to the PVRackTableDialogue
import java.util.Vector;
import java.sql.*;
import javax.swing.table.AbstractTableModel;
import javax.swing.event.TableModelEvent;
public class JDBCAdapter {
Connection connection;
Statement statement;
ResultSet resultSet;
Vector<String> columnNames = new Vector<String>();
Vector<Vector<String>> rows = new Vector<Vector<String>>();
ResultSetMetaData metaData;
public JDBCAdapter(String url, String driverName,
String user, String passwd) {
try {
Class.forName(driverName);
connection = DriverManager.getConnection(url, user, passwd);
statement = connection.createStatement();
catch (ClassNotFoundException ex) {
System.err.println("Cannot find the database driver classes.");
System.err.println(ex);
catch (SQLException ex) {
System.err.println("Cannot connect to this database.");
System.err.println(ex);
public void executeQuery(String query) {
if (connection == null || statement == null) {
System.err.println("There is no database to execute the query.");
return;
try {
resultSet = statement.executeQuery(query);
metaData = resultSet.getMetaData();
int numberOfColumns = metaData.getColumnCount();
// Get the column names and cache them.
// Then we can close the connection.
for(int column = 0; column < numberOfColumns; column++) {
columnNames.addElement(metaData.getColumnLabel(column+1));
// Get all rows.
while (resultSet.next()) {
Vector<String> newRow = new Vector<String>();
for (int i = 1; i <= columnNames.size(); i++) {
String tempString = resultSet.getString(i);
if(!tempString.equals("null")) {
newRow.addElement(tempString);
else {
newRow.addElement("");
rows.addElement(newRow);
//Modify dataTable to add empty row to separate chassis
if(numberOfColumns>1) {
int nRow = rows.size();
Vector<String> row = new Vector<String>();
for(int i=0; i<numberOfColumns; i++){
row.add("");
if(nRow>0 || numberOfColumns>0) {
//Adding blank row to separate chassis
int i = 0;
while(i<nRow) {
if(!rows.elementAt(i).elementAt(0).equals("")) {
if(i>0) {
rows.add(i, row);
i++;
nRow = rows.size();
i++;
close();
catch (SQLException ex) {
System.err.println(ex);
public void close() throws SQLException {
resultSet.close();
statement.close();
connection.close();
// MetaData
public Vector<String> getColumnNames() {
return columnNames;
public Vector<Vector<String>> getDataTable() {
return rows;
public int getColumnCount() {
return columnNames.size();
// Data methods
public int getRowCount() {
return rows.size();
}

Thank you for your answer.
I'm very new to mySql as server. When I was assigned
to write the application, the administrator has set
up mySql database in the company web server for my
application. My program runs very when using my
workplace desktop with java web start or with java
web start in netbeans (all paths should be link to my
desktop hard disk, i.e. users/application/). I can
not run the application at home because I can not
access to the company intranet server (for security
purpose). The problem happens when I post the
application in the company web page (I have to modify
all paths in jnlp file to the company web address).
The program then runs without exception except it
seems that it gets no data from the database (for
example, when I type my username, it returns that
"There is no such user name. contact.." as what I
code in the application for not correcting user name)
It happens for not only using my company desktop but
also for others.
Please help me.
Thank you in advance.And all this could have been answered yesterday, in your other thread, when I asked you "Is the DB configured to allow that user to connect to the DB from where that user is attempting to connect from?"
Seeing as how you get that error, the obvious answer was, "No." At which point we could have continued.
Configure the needed users into the DB, without forgetting to allow them access from the machines from which they are going to access from.
Although, I agree with Rene, that you should set up a server of some sort, located on the same machine as the DB, for communicating with the DB.

No matter what acct I send an email from it gets sent from my gmail

I only have 2 accts set up on my iPhone: gmail (personal) and bethelmaine.org I can receive email into both accts with no problem, but when I try to reply from my bethelmaine acct the recipient gets it from my gmail acct. I know for a fact the Cc/Bcc, From: line is bethelmaine.org and I also know that the recepient gets it as gmail because I tested it several times by sending to my wife's yahoo acct. This happens when the primary server (under settings: mail, contacts, calendars: accounts) is turned off.
The bethelmaine acct outgoing server is set up in Outlook as smtp.megalink.net. When that is set up as the primary server and turned on I get a message that says "the recipient was rejected by the server" no matter who I try to send to.
Not sure what to do!

It seems pretty clear to me.
When you turn off your primary account the only active account the phone can send via is your Gmail account, and that's what you're seeing.
The question is why do you need to turn off the primary account.. which you answer:
When that is set up as the primary server and turned on I get a message that says "the recipient was rejected by the server
That's because your ISP (megalink) is using access controls to manage who sends mail through their mail server. The first thing they're probably doing is using IP address restrictions - essentially saying they'll only relay mail from any machine on their network (including dialup/DSL/etc. customers), but you're not on their network, you're on an AT&T (or Verizon) 3G connection which isn't in their IP address range, and therefore not valid as far as their mail server is concerned.
The typical solution to this is authentication - by authenticating to their server (via username and password) you identify yourself as a customer and they should relay your messages. So check your phone to ensure that you have authentication enabled for your primary mail account.
If that fails (e.g. they don't support authenticated SMTP) the next option would be to relay the message through your cell provider's mail server - as an AT&T wireless customer you should be able to relay through AT&T's mail server... likewise for Verizon (or whatever national carrier your iPhone is on). You'll need to check with your carrier's site for the specifics of the mail server address to use.

Cannot get email from tiscali account

Hi,
I recently changed my password on my tiscali email account. i can get my emails OK on the computer but ever since I have been unable to get emails from this account on my iphone.I have changed the password on the phone, deleted and re-added account, turned phone on and off, in fact everything i can think of but still get the error message 'cannot get mail' the user name or passwordfor tiscali.co.uk is incorrect.
i have another email account not from tiscali and i can get the emails ok , also can access internet.
Can anyone help?
many thanks,
jane

I assume that though your signature says you are running 10.4.8 you are actually running Lion or Mountain Lion? If so please amend the signature to prevent confusion.
Go to System Preferences>iCloud and uncheck Mail in the list there: then re-check it. This should set Mail up again to access the account. If this doesn't work, sign out completely, reboot, then sign back in again. You iCloud data will disappear from your Mac but reappear when you sign back in.

I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

You can go to the Apple online store and purcahse a copy of Mountain Lion. This will give you a redemption code, which you can use to download Mountain Lion from the App Store. Unfortuantely, I'm not aware of any other way to legally purchase it. I have never seen Apple release Muontain Lion on DVD.
In terms of Apple Service, they just need the serial number of the machine to check the purcahse date. It is usually correct, to within a few weeks. A quick Google search should give you the correct number to dial.
I hope this helps.

I have installed Mountain Lion 10.8.1 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

I have installed Mountain Lion 10.8.1 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

I would delete the account and try to re-enter it. Also, you have to let your firm's IT department know that you want to sync work email on your personal devices before they actually work.

Adobe creative cloud is asking for a serial number for updates - where do I get this from?

Adobe Creative cloud is asking for a serial number for updates - where do I get this from
we have recently Bought 5 x 1 year licences and been using this a month
Michael

Hi Mick,
Please refer to the below link.
http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
Thanks

Weblogic realm authentication failure getting connection from pool

We are getting this error when we try to get a connection from the
pool for a Tx Data Source. We are successfully getting connections
from a (non-Tx) Data Source.
java.lang.SecurityException: Authentication for user Fitness_demo
denied in realm weblogic
at weblogic.security.acl.Realm.authenticate(Realm.java:212)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
at weblogic.security.acl.Security.doAsPrivileged(Security.java:481)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:127)
We have added the DB user as a user in the realm, which usually does
the trick; but in this case it does not. We are using Merant's
JSQLConnect type 2 driver for SQL Server, and we are running on
Solaris. The scenario works fine using Oracle Thin driver on Windows.
Do we need ACL entries or something? We do not have any ACL entries
now.
Thanks,
-wes

We are getting this error when we try to get a connection from the
pool for a Tx Data Source. We are successfully getting connections
from a (non-Tx) Data Source.
java.lang.SecurityException: Authentication for user Fitness_demo
denied in realm weblogic
at weblogic.security.acl.Realm.authenticate(Realm.java:212)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
at weblogic.security.acl.Security.doAsPrivileged(Security.java:481)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:127)
We have added the DB user as a user in the realm, which usually does
the trick; but in this case it does not. We are using Merant's
JSQLConnect type 2 driver for SQL Server, and we are running on
Solaris. The scenario works fine using Oracle Thin driver on Windows.
Do we need ACL entries or something? We do not have any ACL entries
now.
Thanks,
-wes

Get subtypes from HR_F4_GET_SUBTYPE

Similar Messages

Maybe you are looking for