Get the changes in WF template under  a transport request

Hi Friends,
Can any one help me to find out, How I can figure out the changes done in a WF template mentioned under transport request.
Regards
Dev

Hi,
How I can figure out the changes done in a WF template
1)In the T.code SWDD, below the workflow no. You can find the Version.
2) '000' --> is the initial version, once you release the Transport Request then again you making the changes to the workflow new version will be generated.
3) Open 2 sessions, Goto SWDD in the Both the session and give the workflow no., then in one session, choose the previous Version and compare the workflow.
4) To manage the version to delete or retrieve back, goto Basic Data -> Version Overview.
Regards,
Surjith

Similar Messages

  • How to get the Change node in Production Server!!!!!

    Hi Guys,
    Kindly let me know how to get the Change node in Production Server for the Transaction Code Pe03 for generating the Acknowledgement No for the year 2008 .
    Plz provide me the steps how to get the Change Node for Acknowledgement No so tat i can get the configuration done.
    Regards
    Ansuman Mohanty.

    Hi Mr!
    If you want to generate the e-file feature 40ACK, do it in our Customization client box (Golden box) & save the request & move to Quality & production.
    Still if you need to workout only in Production, than with the help of Basis people you can get the Production change mode for 5 to 10 min time & can generate it. But mostly Basis people wont give us change mode for Production box ... with ur request they can do..try it.
    Did u collected 4 quarter TAN no's for 2008 Quarter...if not collect it & generate it at a time.
    All the best:-)
    Kind Regards,
    Saisree.S

  • I keep getting the incoming messages bar appearing under mail activity and then all my old emails start to enter inbox. why and how do i stop this and permanently delete these emails?

    i keep getting the incoming messagrs bar appearing under mail activity and all my old emails start to fill my inbox.Why and how do i stop this and how do i permanently delete old e mails?

    Maybe this will help:
    https://discussions.apple.com/message/21026706#21026706

  • How to refresh VO to get the changed value in other AM or backend database

    one VO is refrenced by two AMs, when i insert or update data by VO in one AM, how to get the changed data in another AM ?
    another case is i have updated some attributes of the record in database by SQL statement ,but the client can not get the updated value at once .
    i have tried to use executeQuery() ,but it does not work. now i always do a rollback method ,a bad idea.:)
    pls help me ! thanks
    Message was edited by:
    Guo Qinghua

    Mind that ADF BC (probably like any other persistence framework) caches data. So when you update something in the database other than via ADF BC, you then have in the ADF BC cache what is called 'stale data'. When you try to commit that nevertheless, the database will tell ADF BC that the record in the database has been updated by another user, and a rollback will be done. That is all to be expected.
    You can find some more info on how this works here:
    http://download-uk.oracle.com/docs/html/B25947_01/bcvoeo007.htm
    It also explains how to clear the cache and enforce that data will be read from the database.
    Jan Kettenis

  • How to get the Change Document Header details for a given date

    Hi All,
    Can anyone help me on this Change Document Header details(CDHDR).
    Better way to pull the information of Change Document Header details(CDHDR). No Index is maintained for the tables.
    So please suggest better Optimising techniques to get the Change Document Header details(CDHDR).
    Using this Function module : CHANGEDOCUMENT_READ_HEADERS how to import the DATE_OF_CHANGE.
    Thanks in advance
    Regards
    Chakri

    HI,
    Go through the documenattion of the FM u can get the details.. and also where used list
    Regards,
    Nagaraj

  • Confition type FRC1- how to get the change log,

    Hi,
    When  the condition type FRC1 automatically gets deleted (deletion flag),. and we are not able to see the change log for the same.
    how the Conditions are deleted. Or if at all any one has deleted, how to get the change log,

    Check in
    m/06
    go to utilities
    change log
    If not found  consult BASIS consultant

  • How to get the changes during ABENDED replicat process

    Hi,
    I am working on Oracle GG bi-directional DML replication. I m stuck in one place.
    My target replicat process was ABENDED due to Error :- ORA-01403: no data found. I restarted my replicat process again by runing the below command
    GGSCI (db1) 30> alter replicat rep2 begin now
    GGSCI (db1) 30> start replicat rep2
    After restart the replicat process I can't see the changes on target server which I had applyed on source server during target replicat was ABENED.
    My doubt is.
    1. Is my command is correct for start the ABENDEND replicat process?
    2.How to get the changes on target server which applyed on source during ABNDED of targer replication?
    3.How to avoid the ABENDED replicat process on production server?
    4.how to track the ABENDED process in production server?
    Please HELP:(
    Edited by: NaveenK on Aug 29, 2012 3:32 AM

    NaveenK wrote:
    Hi,
    I am working on Oracle GG bi-directional DML replication. I m stuck in one place.
    My target replicat process was ABENDED due to Error :- ORA-01403: no data found. I restarted my replicat process again by runing the below command
    GGSCI (db1) 30> alter replicat rep2 begin now
    GGSCI (db1) 30> start replicat rep2
    After restart the replicat process I can't see the changes on target server which I had applyed on source server during target replicat was ABENED.
    My doubt is.
    1. Is my command is correct for start the ABENDEND replicat process?
    2.How to get the changes on target server which applyed on source during ABNDED of targer replication?
    3.How to avoid the ABENDED replicat process on production server?
    4.how to track the ABENDED process in production server?
    Please HELP:(
    Edited by: NaveenK on Aug 29, 2012 3:32 AMHi Naveen. SQL Error 1403 means row not found. Your data is out of sync and you should fix this.
    By doing begin now when this happens, you are skipping all the transactions that were "in-line" since the process ABENDED.
    You have more than one way to deal with these things, first of all you should synchronize your data! This should get rid of the 1403 errors.
    Then you can write rules using REPERROR to tell the replicat how to behave in case of errors should come up.
    Using logdump, you can read the exact row which failed and find out the next RBA to skip that specific one if required. You should also configure a DISCARDFILE to get details about errors when they happen.
    Greetings,
    N K

  • Hi, I cannot restart or shut down my MAC and get the message Geneio.it installer is cancelling your request. Please shut down and retry. However, I cannot seem to exit that application and I have no idea where it came from. Thanks

    Hi, I cannot restart or shut down my MAC and get the message Geneio.it installer is cancelling your request. Please shut down and retry. However, I cannot seem to exit that application and I have no idea where it came from. Thanks
    Could this be a virus?

    Hold down the Power button until the computer shuts down.
    The Safe Mac » Adware Removal Guide - Genieo
    The Safe Mac » Adware Removal Guide
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
    From user Joe Bailey comes this equally useful advice:
    The facts are:
    1. There is no anti-malware software that can detect 100% of the malware out there.
    2. There is no anti-malware that can detect anything targeting the Mac because there
         is no Mac malware in the wild, and therefore, no "signatures" to detect.
    3. The very best way to prevent the most attacks is for you as the user to be aware that
         the most successful malware attacks rely on very sophisticated social engineering
         techniques preying on human avarice, ****, and fear.
    4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
        your computer is intended to entice you to install their malware thinking it is a
        protection against malware.
    5. Some of the anti-malware products on the market are worse than the malware
        from which they purport to protect you.
    6. Be cautious where you go on the internet.
    7. Only download anything from sites you know are safe.
    8. Avoid links you receive in email, always be suspicious even if you get something
        you think is from a friend, but you were not expecting.
    9. If there is any question in your mind, then assume it is malware.

  • Today is April 10, 2013. I try to login to iTunes connect and I keep getting the message "An error has occurred processing your request. Please try again later or send an email for assistance." It never tells us what email address we need to write to.

    Today is April 10, 2013. I try to login to iTunes connect and I keep getting the message "An error has occurred processing your request. Please try again later or send an email for assistance." It never tells us what email address we need to write to.

    The problem was solved by Apple Technical Help. The process is as flollows:
    1. Open Safari
    2. Menu item Safari-Reset Safari - remove all website data - reset
    3. Now if you try to login on iTunes connect it will work.

  • I lost my iphone and I use the locate iphone function to wipe to protect my information, but I cannot get the location to restore my iphone, can I request a permanent lock to prevent the thief from using it?

    I lost my iphone and I use the locate iphone function to wipe to protect my information, but I cannot get the location to restore my iphone, can I request a permanent lock to prevent the thief from using it?, I call your call centre, your staff said they can do nothing, I am great disappointed as your advertisment said that we can protect our phone from lost, however, I think my phone has now been resale and reuse by others, but Apple cannot do anything with your so call "Find my iphone" function, I have brought 4 iphone and iPad for my family use, I will never use your product again and recommend to my company or friends anymore!
    Philip Sin

    You are not addressing Apple here at all.
    Apple can do nothing.  Sorry.
    Like any other make of any other phone, they cannot permanently disable it.
    The thief is responsible.  Not Apple.  You seem to be directing your anger at the wrong people.
    No phone manufacturer will do this.
    "I am great disappointed as your advertisment said that we can protect our phone from lost, "
    It mentions "loss"  NOT theft.  you cannot find a mention of theft protection.  Find my iphone is NOT theft protection and has never been advertised as such.

  • I have created two tables for my new  report under one transport request.

    Unwanted table transported
    I have created two tables for my new  report under one transport request.
    But I only need one table and the second table I was supposed to delete.
    However by mistake, with out deleting the second tableu2026 the transport request is released and moved to quality system.
    how to handle this issue. 
    I am not sure any additional changes for this program.
    Could you please suggest me an idea.
    Thanks in adv

    >
    sam kumar wrote:
    > Unwanted table transported
    > I have created two tables for my new  report under one transport request.
    > But I only need one table and the second table I was supposed to delete.
    > However by mistake, with out deleting the second tableu2026 the transport request is released and moved to quality system.
    >
    > how to handle this issue. 
    >
    > I am not sure any additional changes for this program.
    > Could you please suggest me an idea.
    >
    > Thanks in adv
    Does one custom table more or less really matter?  If you really want delete it, delete the table in DEV which will put it into a new transport and get that transport moved to TEST.

  • How to delete Graphics Image under any Transport Request?

    Hi Guru's,
    I want to delete the Graphics Image under one Transport Request.
    but when i try to delete it from SE78, it is deleting with out asking any new Transport Request.
    Can anybody give me some inputs.
    Thanks in Advance,
    Venkat

    Thanks Lavanya for your quick reply,
    can you explain where exactly we can see that deltion attributes.
    if i am opening that TR number in SE09....i can't see any new attributes..
    what ever previous parameters are there only those are available..
    Thanks,
    venkat

  • How can we download smartforms under a transport request.

    hi
       my requirement is that i have to download all smartforms under a transport request using a report program, is thr any standard program in sap or anyone who have done it before.
    thanks n regards.
    pardeep kumar

    Write a custom BDC program.

  • How to get the change mode option for the line items in SC

    Hi Everybody,
    1. when the SC has 2 line items and in that if both the line item are rejected by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line items of both the rejected one, the change is enable and the requester can do the changes in the line items of the shopping cart which is working fine. but in the other case
    2. when the SC has 2 line items and in that if any one of the line item is rejected and other one is approved by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line item of the rejected one, the change is getting disabled but for the approved line item the requester can able to do the changes.
    so can anyone help me out how to solve this issue that if any one line item is rejected in the shopping cart also it should get the editable mode when the requester wants to do any changes.
    thanks in advance.

    Hi Everybody,
    1. when the SC has 2 line items and in that if both the line item are rejected by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line items of both the rejected one, the change is enable and the requester can do the changes in the line items of the shopping cart which is working fine. but in the other case
    2. when the SC has 2 line items and in that if any one of the line item is rejected and other one is approved by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line item of the rejected one, the change is getting disabled but for the approved line item the requester can able to do the changes.
    so can anyone help me out how to solve this issue that if any one line item is rejected in the shopping cart also it should get the editable mode when the requester wants to do any changes.
    thanks in advance.

  • How to get the value of identity template

    Hello,
    i have a AD resource and i want to get the identity model value in a form. Is it possible to do it ?
    Thanks

    A Resource object has a method getIdentityTemplate but its result type won't be easy to use inside a form.
    What kind of information are you exactly interested in?
    For example if you need to know which resource attributes are part of the identity template, you can find this information directly in the user view, i.e. :
    <ref>accountInfo.accounts[Active Directory].attributes[idTemplate=true].name</ref>

Maybe you are looking for