Get the currently selected entry point

Hello,
I developed an content iview, where i have to find out which entry point is currently selected in the navigation.
Anyone an idea how to do this?
Thanks and Regards
Robert

Hi Robert,
Using the breadcrumb you can get the navigation of the current selection...
Try out this blog
EFP: Working with the New Taglibs - Part 2
-Aarthi

Similar Messages

  • JTree: How to get the currently selected node

    How do I get the currently selected node in JTree?
    getLastSelectedPathComponent() this method always return the last selected node and not the current one.
    Thanks in advance
    Sachin

    Use
    TreePath selectedPath = tree.getSelectionPath()If your tree allows multiple selections, use
    TreePath [] selectedPaths = tree.getSelectionPaths() this will return an array of all selected tree paths.
    Once you get the tree path, call the treePath.getLastPathComponent(). this should tell you the currently selected node.
    Hope this helps
    Sai Pullabhotla

  • How to get the current selected value of a combo box or a option button?

    Hello All,
    I want to catch the current selected value of a combo box and also of a option button and want save it into different variables in my code. These option button and combo box are in a SAP business one form which I have created through VB dot.net coding.
    But I don't know how to do that, can any one send any example code for this.
    Regards,
    Sudeshna.

    Hi Sudesha,
    If you want to get the selected values you can do it as follows: The Combo Box value you can get from the combo box. If you want to get it on the change event, you must make sure that you check when BeforeAction = False. If you want to get an Option Button value you should check the value in the data source attached to the option button.
            Dim oForm As SAPbouiCOM.Form
            Dim oCombo As SAPbouiCOM.ComboBox
            Dim oData As SAPbouiCOM.UserDataSource
            oForm = oApplication.Forms.Item("MyForm")
            oCombo = oForm.Items.Item("myComboUID")
            oApplication.MessageBox(oCombo.Selected.Value)
            oData = oForm.DataSources.UserDataSources.Item("MyDataSourceName")
            oApplication.MessageBox(oData.ValueEx)
    Hope it helps,
    Adele

  • Tried to update iTunes, after downloading I get the message: procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQLite3.dll ??

    Tried to update iTunes. After downloading I get this message: Procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQLite3.dll ??  What does that mean?!

    Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.

  • I have been trying to re download itunes, each time it says download is successful.  However, i kept getting the "itunes.exe- entry point not found?

    When I click on itunes on my laptap, i get promted with "the procedure entry point AVCFPlayer Applies Media Selection Criteria Automatically Key could not be located in the dynamic link library AV FoundationCF.dll?
    How can I correct this please.  I have not been able to go to iTunes?

    Try the following user tip with that one:
    Troubleshooting issues with iTunes for Windows updates

  • Re: Getting the current selected Row & column in adf table

    Hi,
    Our requirement is we have to retrieve both the current row and column in adf table.
    We can retrieve the current row in the backing bean like
    ViewObject view = getViewObject();
    view.getCurrentRow();
    Is it possible to retrieve selected column id or column header text as we are getting for row?
    please give some sample.
    Thanks,
    Vijay.
    Edited by: Vijayakumar Palanisamy on Jun 23, 2011 2:23 AM

    Hi John
    My exact requirement,
    1.     We have collection of records in adf table
    2.     Each cell in the row has commandImageLink (Like adding approver, edit approver, delete etc)
    Currently it’s working fine for me in the commandImageLink listener, but the problem is table is refreshed 2 time,
    while selecting a record and commandImageLink is clicked, I have to avoid 2 times refreshing,
    If it’s possible to identify a particular cell in the row selection, I can avoid the image link listener.
    we are using Jdeveloper11.1.1.4.0
    Please suggest.
    Thanks,
    Vijay

  • How to get the current selected column and row

    Hi,
    A difficult one, how do i know which column (and row would also be nice) of a JTable is selected?
    e.g.
    I have a JButton which is called "Edit" when i select a cell in the JTable and click the button "Edit" a new window must be visible as a form where the user can edit the a part of a row.
    Then the column which was selected in the JTable must be given (so i need to know current column) and then i want the TextField (the one needed to be edited) be active with requestFocus(). So it would be
    pricetextfield.requestFocus();
    Problem now is that i have to click every time in the window the JTextField which was selected in the JTable. I have chosen for this way of editing because my application is multi-user and it would be too difficult for me when everybody did editing directly (catch signals, reload data, etc.).
    My question is how do I know the current column and the current row in a JTable?

    I'm not sure what your mean by the "current" row or column, but the following utility methods return
    which row and column have focus within the JTable.
    public static int getFocusRow(JTable table) {
        return table.getSelectionModel().getLeadSelectionIndex();
    public static int getFocusColumn(JTable table) {
        return table.getColumnModel().getSelectionModel().getLeadSelectionIndex();
    }

  • VS2013 / Team Explorer vsix - How to get the currently selected build definition?

    Greetings,
    My goal with a simple extension is to right-click any build definition and if my "Show Build Def Stats" menu item is selected, pop a message box with some summary details I plan to pull from the IBuildDefinition interface.
    I'm missing something fundamental I'm sure, but I cannot figure out how in the menu handler the actual build definition that I clicked on.
    The menu command is added where I want it successfully:
    Symbol info used to get this there:
        <!-- This is the Build Definition Context Menu -->
        <GuidSymbol name="guidTeamExplorerBuildDefContextMenu" value="{34586048-8400-472E-BBBF-3AE30AF8046E}" >
          <IDSymbol name="menuBuildDefinitionContext" value="0x109"/>
        </GuidSymbol>
    I am stumped as to how to get the fact that I clicked the "ISRepository" build definition in either the Initialize() or MenuItemCallBack() methods, I haven't come across the right service or container object that I recognize.
    Much obliged!
    --Jordan

    I have been investigating this for a while using .NET Reflector and finally I got it:
    In VS 2013, add references to the following assemblies in the folder C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team Explorer:
    Microsoft.TeamFoundation.Controls.dll
    Microsoft.TeamFoundation.Build.Controls.dl
    And then use this code:
    Microsoft.TeamFoundation.Controls.ITeamExplorer teamExplorer;
    Microsoft.TeamFoundation.Controls.ITeamExplorerPage teamExplorerPage;
    Microsoft.TeamFoundation.Build.Controls.Extensibility.IBuildsPageExt buildsPageExt;
    teamExplorer = base.GetService(typeof(Microsoft.TeamFoundation.Controls.ITeamExplorer)) as Microsoft.TeamFoundation.Controls.ITeamExplorer;
    teamExplorerPage = teamExplorer.CurrentPage;
    buildsPageExt = teamExplorerPage.GetExtensibilityService(typeof(Microsoft.TeamFoundation.Build.Controls.Extensibility.IBuildsPageExt)) as Microsoft.TeamFoundation.Build.Controls.Extensibility.IBuildsPageExt;
    foreach (Microsoft.TeamFoundation.Build.Controls.Extensibility.IDefinitionModel definitionModel in buildsPageExt.SelectedDefinitions)
    System.Windows.Forms.MessageBox.Show(definitionModel.Name);
    * My new blog about VSX: http://www.visualstudioextensibility.com * Twitter: https://twitter.com/VSExtensibility * MZ-Tools productivity extension for Visual Studio: http://www.mztools.com.

  • When syncing, i often do not get the current selections added or past selections deleted fom the ipod. any suggestions?

    when i sync up my ipod, i select new songs to add and remove. although itunes on the computer says syncing, the songs are not put on or taken off. any help to fix this would be most appreciated.

    get an iPhone? 
    as to date - that is an EXIF entry placed there by the camera (phone) and iPhoto just reads it so the cause is the phone recording it incorrectly somehow - you can export one to the desktop and look at the EXIF data using simple EXIF viewer - http://homepage.mac.com/aozer/EV/
    As ro faces, iPhoto does not distinguish by camera - it processes photos - if the photos taken by one camera are acting differently from the photos taken by other cameras then again I would look to the camera - contact their support
    LN

  • How to get to know the current selected service?

    Can anyone tell me how to get the current selected service in MHP? I tried to find one but no result. Can javax.tv.media.MediaSelectControl.getCurrentSelection() gives me the answer?

    servicecontext.getService()

  • After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."

    After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Kindly advice a process to get rid of this error, without losing my files on the iTunes.

    Hi, I get the same error EVERY time iTunes updates.
    I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
    My Question:
    Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
    It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
    Thank You,
    Steve

  • Applescript to get the current insertion point of the cursor

    How do I use Applescript to get the current insertion point of the cursor in a Apple pages.app document?

    Oops, missed that one - you are correct, the line should be:
    <pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto">set {TheStart, TheEnd} to character range of the selection</pre>
    I have a wrapper script that I use to insert stuff from my handler/code library into a Script Editor document, and was adapting snippets from that for my examples - I guess that one got away.
    As for the dictionary, some applications just have poorly written or outdated documentation. Some of the items have multiple entries (eg, there may be a selection object for the application and also for the document), and some inherit properties from other items. Some are used as nouns, others as verbs (or both). Sometimes it is easier to visualize the item by keeping track of it's reference - the 'some property of document 1 of the current application' thing. You can use the Script Editor's Event Log to see the results of various properties and commands - for example, the above script will result in the following entry (your numbers will vary depending on the selected text):
    <pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto">tell current application
    get character range of selection
    {50, 50}
    end tell
    </pre>
    You can also use the 'log' statement (eg, 'log MyVariable') to add your own entries into the log instead of using dialog boxes.

  • I need to get the current assignee for a given request using SOA's java api

    I'm developing a spring app that interfaces with Oracle SOA suite and executes the actions such as approving requests using the api. I need to get the current assignee for each SOA Task this is dispalyed in the OIM console so it is getting it from somewhere. I tried getApprovers in the ITaskService api but this returns an empty list

    I have checked it once again and there indeed are links for ALUI components for Solaris on SPARC at edelivery.oracle.com. (Officially ALUI supports Solaris on SPARC only)
    If you have looked at Solaris x86, then you must not have found them. Please make sure that you are selecting the righ platform. Also, make sure that you click on the Aqualogic media pack so as to get the lists of the components included in it. (Point to Note: You need to go to the next level)
    For whichever component you are not able to find, try looking for it in the Metalink (My Oracle Support) if you have a support contract.

  • Need help on how to specify the current select row in a View Object

    Hi,
    I have a ADF table on my page, when I was selecting the rows in this table, I want the set and get methods in the ViewRowImpl class to do some customized actions. I found out that each time regardless the row I select in the table, the viewrowimpl class will always return the data in the first row, I tried to use getCurrentRow in VO row impl. but still, gets the first row.
    Does anyone know how to get the selected row value in the View Object, or View Row Impl rather???
    Thanks!

    Hi,
    you can call a method exposed by the AM and pass teh rowKey of the selected row as an argument. When you configure the exposed AM method in the pageDef (creating a method binding) the argument is shown in a dialog from where you can use EL like #{bindings.iteratorName.currentRow.rowKey} to access the current selected row.
    Frank

  • How do I return to the start of the current selection?

    In Audtion 3 and earlier, if I wanted to hear currently selected audio, I just made the selection in the Waveform Editor, pressed Play and the selection would play.  It would play the same selection again if I stopped playback and pressed Play again.  In CS5.5 and 6 this only seems to work the first time you press Play after selecting some audio.  After that, the audio just resumes from when it last stopped.
    Is there any way to get the current time indicator to return to the beginning of a selection?
    Robert

    I find it to be quite consistent in its behaviour. But if you want to investigate the possibilities, go to Edit>Preferences>Playback, and you have several self-evident options to alter it.

Maybe you are looking for