Get the filename from a directory and insert into a table

Hi,
I have a requirement, i need to read the file name from a Linux directory and get that file name into a variable,
After that i need to insert that file name into a table.
EX: let their is a file1.txt in abc directory , and i read that "file name" into v_file_name variable and i am going to insert that file name into a table.

You should have something common in all your file name that can be used to distinguish between them.
Ex: Suppose file names are like FILENAME_PKG1,FILENAME_PKG2,FILENAME_PKG3 then it will be easier to develop the logic inside ODI so that FILENAME_PKG1 can be processed by package1 ,FILENAME_PKG2 can be processed by package2 ,FILENAME_PKG3 can be processed by package3.
Hope you got, what i want to say.
Thanks.

Similar Messages

How to get the data from a file and insert into a table

Good morning,
NEED TO READ THIS FILE sui_facturacion_alcantarillado_15085_2011_01_76845_00A.csv containing the following information
NUID,NUMERO_DE_CUENTA_CONTRATO,CÓDIGO_DANE_DEPARTAMENTO,CÓDIGO_DANE_MUNICIPIO,ZONA_IGAC,SECTOR_IGAC,MANZANA_O_VEREDA_IGAC,NÚMERO_DEL_PREDIO_IGAC,CONDICION_DE_PROPIEDAD_DEL_PREDIO_IGAC,DIRECCIÓN_DEL_PREDIO,NÚMERO_DE_FACTURA,FECHA_DE_EXPEDICIÓN_DE_LA_FACTURA,FECHA_DE_INICIO_DEL_PERÍODO_DE_FACTURACIÓN,DIAS_FACTURADOS,CÓDIGO_CLASE_DE_USO,UNIDADES_MULTIUSUARIO_RESIDENCIAL,UNIDADES_MULTIUSUARIO_NO_RESIDENCIAL,HOGAR_COMUNITARIO_O_SUSTITUTO,USUARIO_FACTURADO_CON_AFORO,USUARIO_CUENTA_CON_CARACTERIZACIÓN,CARGO_FIJO,CARGO_POR_VERTIMIENTO_BASICO,CARGO_POR_VERTIMIENTO_COMPLEMENTARIO,CARGO_POR_VERTIMIENTOSUNTUARIO,CMT,VERTIMIENTO_DEL_PERIOD_EN_METROS_CUBICOS,VALOR_FACTURADO_POR_VERTIDO,VALOR_DEL_SUBSIDIO,VALOR_DE_LA_CONTRIBUCIÓN,FACTOR_DE_SUBSIDIO_O_CONTRIBUCIÓN_CARGO_FIJO,FACTOR_DE_SUBSIDIO_O_CONTRIBUCIÓN_VERTIMIENTO,CARGOS_POR_CONEXIÓN,PAGO_ANTICIPADO_DEL_SERVICIO,DÍAS_DE_MORA,VALOR_DE_MORA,INTERESES_POR_MORA,OTROS_COBROS,CAUSAL_DE_REFACTURACIÓN,NUMERO_DE_LA_FACTURA_OBJETO_DE_REFACTURACIÓN,VALOR_TOTAL_FACTURADO,PAGOS_DEL_CLIENTE_DURANTE_EL_PERÍODO_FACTURADO
242602,242602,76,845,99,99,9999,9999,999,CLL 5 CRA 7 PEATONAL,24911920,12-01-2011,01-12-2010,30,01,,,0,0,0,1,0000000000.00,0000000000.00,0000000000.00,0000000000.00,0000000005,0000002200.00,0000000000,0000000000,0.000,0.000,0000000000.00,0000000000.00,0,0000000000.00,0000000000.00,0000000000.00,0,0,0000002201.00,0000000000.00
242604,242604,76,845,99,99,9999,9999,999,CRA 4 # 6 - 13,24911846,12-01-2011,01-12-2010,30,01,,,0,0,0,1,0000000000.00,0000000000.00,0000000000.00,0000000000.00,0000000013,0000002200.00,0000000000,0000000000,0.000,0.000,0000000000.00,0000000000.00,0,0000000000.00,0000000000.00,0000000000.00,0,0,0000002201.00,0000004411.00
242605,242605,76,845,99,99,9999,9999,999,CRA 2 CLLES 3 Y 4,24911509,12-01-2011,01-12-2010,30,01,,,0,0,0,1,0000000000.00,0000000000.00,0000000000.00,0000000000.00,0000000004,0000002200.00,0000000000,0000000000,0.000,0.000,0000000000.00,0000000000.00,0,0000000000.00,0000000000.00,0000000000.00,0,0,0000002201.00,0000002200.00
this is the function that I have
<<function_test>>
DECLARE
TOTAL_CAR NUMBER;
POS_1 NUMBER:= 0;
POS_2 NUMBER:= 0;
REST NUMBER:= 0;
ACUM NUMBER:= 0;
CADEN VARCHAR2(200);
nom_archivo varchar2(80);
v1 utl_file.file_type;
v2 varchar2(2048);
BEGIN
     nom_archivo := 'sui_facturacion_alcantarillado_15085_2011_01_76845_00A.csv';
     v1:= utl_file.fopen('PUBLIC_ACCESS',nom_archivo,'R',32767);
     utl_file.get_line(v1,v2);
     SELECT LENGTH(v2) INTO TOTAL_CAR FROM DUAL;
     ACUM:=1;
     POS_1:=0;
     WHILE ACUM <= 60
     LOOP
          select instr(v2, ',', 1, ACUM) PRUEBA
          INTO      POS_2
          FROM      DUAL;
          dbms_output.put_line(' TOTAL POSICION 1--> '|| POS_1);
          dbms_output.put_line(' TOTAL POSICION 2--> '|| POS_2);
          dbms_output.put_line(' TOTAL ACUMULADO --> '|| ACUM);
          REST := (POS_2-POS_1)-1;
          SELECT SUBSTR(v2,(POS_1+1),REST) PRUEBA2
               INTO CADEN
          FROM      DUAL;
          dbms_output.put_line(' CADENA SELECCIONADA --> '|| CADEN);
          ACUM := ACUM + 1;
          POS_1:= POS_2;
     END LOOP;
     utl_file.fclose(v1);
     dbms_output.put_line(' -->');
     dbms_output.put_line(' TOTAL POSICION 1-->'|| POS_1);
     dbms_output.put_line(' TOTAL POSICION 2-->'|| POS_2);
     dbms_output.put_line(' TOTAL ACUMULADO -->'|| ACUM);
     dbms_output.put_line(' TOTAL DE CARACTERES -->'|| TOTAL_CAR);
     dbms_output.put_line(' ');
     EXCEPTION
          WHEN NO_DATA_FOUND THEN
               dbms_output.put_line('NO SE ENCONTRARON MAS CARACTERES');
          WHEN OTHERS THEN
               dbms_output.put_line('OTRO TIPO DE ERROR ');
               dbms_output.put_line('CODIGO ERROR '|| SQLCODE ||' '||SQLERRM);
END;
Which must be separated by a comma and enter a table I have the following procedure in which only brings me the first line, which need not
The current role I have just read and extract data from the row number 1, I do not need information.
I need information for rows 2,3,4. In each row there are 41 fields, which I enter in a table called Dato_archivos.
how to perform this function? ...
I appreciate the cooperation and explanation ...
GOOD DAY ...
REYNEL SALAZAR MARTINEZ
COLOMBIA ...

When you get an error with external tables (or sql*loader) look in the same folder as the data file and you should get a .log file and maybe a .bad file too.
The log file should indicate the nature of the error it has trying to load the data.
I've just copied your sample data from your first post to a file on my server and tried it to find that you are not specifying the required format for your dates. The below shows it now working...
CREATE TABLE tabla_prueba
(NUID NUMBER,
   NUM_CUENTA_CONTRATO NUMBER,
   COD_DANE_DD NUMBER,
   COD_DANE_MM NUMBER,
   ZONA_IGAC NUMBER,
   SECTOR_IGAC NUMBER,
   MANZANA_VEREDA_IGAC NUMBER,
   NUM_PREDIO_IGAC NUMBER,
   CONDICION_PREDIO_IGAC NUMBER,
   DIRECCION_PREDIO_IGAC VARCHAR2(80),
   NUM_FACTURA NUMBER,
   FECHA_EXPED_FACTURA DATE,
   FECHA_INI_PERIODO_FACTURACION DATE,
   DIAS_FACTURADOS NUMBER,
   COD_CLASE_USO NUMBER,
   UNI_MULTIUSUARIO_RESIDENCIAL NUMBER,
   UNI_MULTIUSUARIO_NORESIDENCIAL NUMBER,
   HOGAR_COMUNITARIO NUMBER,
   USUARIO_FACTURADO_AFORO NUMBER,
   USUARIO_CON_CARACTERIZACION NUMBER,
   CARGO_FIJO NUMBER,
   CARGO_VERTIMENTO_BAS NUMBER,
   CARGO_VERTIMENTO_COMP NUMBER,
   CARGO_VERTIMENTO_SUNT NUMBER,
   CMT NUMBER,
   VLR_FACTURADO_VERTIDO NUMBER,
   VLR_SUBSIDIO NUMBER,
   VLR_CONTRIBUCCION NUMBER,
   FACTOR_SUBS_CONTR_CARGO_FIJO NUMBER,
   FACTOR_SUBS_CONTR_VERTIMENTO NUMBER,
   CARGO_CONEXION NUMBER,
   PAGO_ANTICIPADO_SERVICIO NUMBER,
   DIAS_MORA NUMBER,
   VLR_MORA NUMBER,
   INTERES_MORA NUMBER,
   OTROS_COBROS NUMBER,
   CAUSAL_REFACTURACION NUMBER,
   NUM_FACTURA_OBJ_REFACTURACION NUMBER,
   VLR_TOTAL_FACTURADO NUMBER,
   PAGOS_CLIENTE_DURANTE_PERIODO NUMBER
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
   DEFAULT DIRECTORY TEST_DIR
   ACCESS PARAMETERS
    (RECORDS DELIMITED BY NEWLINE
     SKIP 1
     FIELDS TERMINATED BY ","
     OPTIONALLY ENCLOSED BY '"'
      (NUID,
       NUM_CUENTA_CONTRATO,
       COD_DANE_DD,
       COD_DANE_MM,
       ZONA_IGAC,
       SECTOR_IGAC,
       MANZANA_VEREDA_IGAC,
       NUM_PREDIO_IGAC,
       CONDICION_PREDIO_IGAC,
       DIRECCION_PREDIO_IGAC,
       NUM_FACTURA,
       FECHA_EXPED_FACTURA CHAR DATE_FORMAT DATE MASK "DD-MM-YYYY",
       FECHA_INI_PERIODO_FACTURACION CHAR DATE_FORMAT DATE MASK "DD-MM-YYYY",
       DIAS_FACTURADOS,
       COD_CLASE_USO,
       UNI_MULTIUSUARIO_RESIDENCIAL ,
       UNI_MULTIUSUARIO_NORESIDENCIAL,
       HOGAR_COMUNITARIO ,
       USUARIO_FACTURADO_AFORO ,
       USUARIO_CON_CARACTERIZACION ,
       CARGO_FIJO ,
       CARGO_VERTIMENTO_BAS ,
       CARGO_VERTIMENTO_COMP,
       CARGO_VERTIMENTO_SUNT,
       CMT,
       VLR_FACTURADO_VERTIDO,
       VLR_SUBSIDIO ,
       VLR_CONTRIBUCCION ,
       FACTOR_SUBS_CONTR_CARGO_FIJO ,
       FACTOR_SUBS_CONTR_VERTIMENTO ,
       CARGO_CONEXION ,
       PAGO_ANTICIPADO_SERVICIO ,
       DIAS_MORA ,
       VLR_MORA ,
       INTERES_MORA ,
       OTROS_COBROS ,
       CAUSAL_REFACTURACION ,
       NUM_FACTURA_OBJ_REFACTURACION,
       VLR_TOTAL_FACTURADO,
       PAGOS_CLIENTE_DURANTE_PERIODO
    LOCATION ('test.csv')
SQL> select * from tabla_prueba;
      NUID NUM_CUENTA_CONTRATO COD_DANE_DD COD_DANE_MM ZONA_IGAC SECTOR_IGAC MANZANA_VEREDA_IGAC NUM_PREDIO_IGAC CONDICION_PREDIO_IGAC DIRECCION_PREDIO_IGAC                                                    NUM_FACTURA FECHA_EXPE FECHA_INI_
DIAS_FACTURADOS COD_CLASE_USO UNI_MULTIUSUARIO_RESIDENCIAL UNI_MULTIUSUARIO_NORESIDENCIAL HOGAR_COMUNITARIO USUARIO_FACTURADO_AFORO USUARIO_CON_CARACTERIZACION CARGO_FIJO CARGO_VERTIMENTO_BAS CARGO_VERTIMENTO_COMP CARGO_VERTIMENTO_SUNT        CMT
VLR_FACTURADO_VERTIDO VLR_SUBSIDIO VLR_CONTRIBUCCION FACTOR_SUBS_CONTR_CARGO_FIJO FACTOR_SUBS_CONTR_VERTIMENTO CARGO_CONEXION PAGO_ANTICIPADO_SERVICIO DIAS_MORA   VLR_MORA INTERES_MORA OTROS_COBROS CAUSAL_REFACTURACION NUM_FACTURA_OBJ_REFACTURACION
VLR_TOTAL_FACTURADO PAGOS_CLIENTE_DURANTE_PERIODO
    242602              242602          76         845         99          99                9999         9999              999 CLL 5 CRA 7 PEATONAL                                                         24911920 12-01-2011 01-12-2010
             30             1                                                                             0               0                           0          1                    0                     0                     0          0
                    5         2200                 0                            0                            0              0                        0          0          0            0            0                    0                             0
                  0                          2201
    242604              242604          76         845         99          99                9999         9999              999 CRA 4 # 6 - 13                                                               24911846 12-01-2011 01-12-2010
             30             1                                                                             0               0                           0          1                    0                     0                     0          0
                   13         2200                 0                            0                            0              0                        0          0          0            0            0                    0                             0
                  0                          2201
    242605              242605          76         845         99          99                9999         9999              999 CRA 2 CLLES 3 Y 4                                                            24911509 12-01-2011 01-12-2010
             30             1                                                                             0               0                           0          1                    0                     0                     0          0
                    4         2200                 0                            0                            0              0                        0          0          0            0            0                    0                             0
                  0                          2201
SQL>
{code}

How to read the data from XML file and insert into oracle DB

Hi All,
I have below require ment.
I will receive data in the XML file. then i need to read that data and insert into oracle tables. please let me know how this can be handled.
Many Thanks.

Sounds a lot like this question, only with less details.
how to read data from XML variable and insert into table variable
We can only help if you provide us details to help as we cannot see what you are doing and only know what you tell us. Plenty of examples abound on the forums that cover the topics you seek as well.

HOW TO READ DATA FROM A FILE AND INSERT INTO A TABLE USING UTL_FILE

Hi..
I have a file.I want to read the data from file and load it into a table using utl_file.
how can I do it?
Any reply apreciated...

Hi,
This is not your requirment but u can try this :
CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
GRANT READ ON DIRECTORY text_file TO fah;
GRANT WRITE ON DIRECTORY text_file TO fah;
DROP TABLE load_a;
CREATE TABLE load_a
(a1 varchar2(20),
a2 varchar2(200))
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY text_file
ACCESS PARAMETERS
(FIELDS TERMINATED BY ','
LOCATION ('data.txt')
select * from load_a;
CREATE TABLE A AS select * from load_a;
SELECT * FROM A
Regards
Faheem Latif

I have an old iPod Classic with 80 GB (I think) of space. I saved all my songs in an external hard drive, but the iTunes library resided in an old computer (no longer working). Can I get the libray from my iPod and use it in my new computer (Windows)?

I have an old iPod Classic with 80 GB (I think) of space. I saved all my songs in an external hard drive, but the iTunes library resided in an old computer (no longer working). Can I get the library from my iPod and use it in my new computer (Windows)?

You might want to check your process for moving your iTunes music against this: http://support.apple.com/kb/HT4527.

Fetch data from two tables and insert into one table

I have similar to the following data in two tables (@Plant, @PlantDirector) and need to consolidate into one table (@PlantNew) as follows.
DECLARE @Plant TABLE (PlantID INT, PlantName VARCHAR(100))
INSERT INTO @Plant (PlantID, PlantName) VALUES (1, 'Name One'),(2, 'Name Two'),(3, 'Name Three'),(4, 'Name Four'),(5, 'Name Five'),(6, 'Name Six')
Director data for the Plants exist in the following table. Assistant value 1 means Assistant Director and 0 means Director.
Data exists only for subset of plants and a Plant may have one or both roles.
DECLARE @PlantDirector TABLE (PlantID INT, PlantDirectorID INT, Assistant bit)
INSERT INTO @PlantDirector (PlantID, PlantDirectorID, Assistant) VALUES (2, 111, 1),(2, 222, 0),(4, 333, 0),(6,444,1)
The above data needs to be inserted into one table (@PlantNew) as follows:
PlantID in @Plant table is IDENTITY value and needs to be inserted as-is into this table.
PlantDirExists will get a value of 1 if at least one record exists in @PlantDirector table for a PlantID. PlantAssistantDirID and PlantDirID should be set to the corresponding PlantDirID or NULL appropriately depending on the data.
DECLARE @PlantNew TABLE (PlantID INT, PlantName VARCHAR(100), PlantDirExists bit, PlantAssistantDirID INT, PlantDirID INT)
INSERT INTO @PlantNew (PlantID, PlantName, PlantDirExists, PlantAssistantDirID, PlantDirID)
VALUES (1, 'Name One', 0, NULL, NULL),(2, 'Name Two', 1, 111, 222),(3, 'Name Three', 0, NULL, NULL),(4, 'Name Four', 1, NULL, 333),(5, 'Name Five', 0, NULL, NULL),(6, 'Name Six',1, 444, NULL)
How do I achieve the above using SQL ? Thanks.

like this
INSERT @PlantNew (PlantID, PlantName, PlantDirExists, PlantAssistantDirID, PlantDirID)
SELECT p.PlantID,
p.PlantName,
CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
PlantAssistantDirID,
PlantDirID
FROM @Plant p
LEFT JOIN (SELECT PlantID,
MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
@PlantDirector
GROUP BY PlantID)pd
ON pd.PlantID = p.PlantID
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
You're missing a FROM
insert into @PlantNew
SELECT p.PlantID,
p.PlantName,
CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
PlantAssistantDirID,
PlantDirID
FROM @Plant p
LEFT JOIN (SELECT PlantID,
MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
from @PlantDirector
GROUP BY PlantID)pd
ON pd.PlantID = p.PlantID

How to extract data from xml and insert into Oracle table

Hi,
I have a large xml file. which will have hundreds of the following transaction tags having column names and there values.
There is a table one of the schema with coulums "actualCostRate","billRate"....etc.
I need to extract the values of these columns and insert into the table
<Transaction actualCostRate="0" billRate="0" chargeable="1" clientID="NikuUK" chargeCode="LCOCD1" externalID="L-RESCODE_UK1-PROJ_UK_CNT_GBP-37289-8" importStatus="N" projectID="TESTPROJ" resourceID="admin" transactionDate="2002-02-12" transactionType="L" units="11" taskID="5017601" inputTypeCode="SALES" groupId="123" voucherNumber="ABCVDD" transactionClass="ABCD"/>
<Transaction actualCostRate="0" billRate="0" chargeable="1" clientID="NikuEU" chargeCode="LCOCD1" externalID="L-RESCODE_US1-PROJ_EU_STD2-37291-4" importStatus="N" projectID="TESTPROJ" resourceID="admin" transactionDate="2002-02-04" transactionType="L" units="4" taskID="5017601" inputTypeCode="SALES" groupId="124" voucherNumber="EEE222" transactionClass="DEFG"/>

Re: Insert from XML to relational table
http://www.google.ae/search?hl=ar&q=extract+data+from+xml+and+insert+into+Oracle+table+&btnG=%D8%A8%D8%AD%D8%AB+Google&meta=

How do i get the music from my click wheel ipod into my itunes

How do i get the music from my click wheel ipod into my itunes library.

You cannot transfer song files from iPod to computer using iTunes, except for songs purchased from the iTunes Store. However, there are third-party methods and utilities that can transfer from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
Once the song files are on your computer, you can add them to your iTunes library.

Hi, extract data from xml file and insert into another exiting xml file

i am searching code to extract data from xml file and insert into another exiting xml file by a java program. I understood it is easy to extract data from a xml file, and how ever without creating another xml file. We want to insert the extracted data into another exiting xml file. Suggestions?
1st xml file which has two lines(text1.xml)
<?xml version="1.0" encoding="iso-8859-1"?>
<xs:PrintDataRequest xmlns:xs="http://com.unisys.com/Anid"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://com.unisys.com/Anid file:ANIDWS.xsd">
<xs:Person>
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://com.unisys.com/Anid file:ANIDWS.xsd">
These two lines has to be inserted in the existing another xml(text 2.xml) file(at line 3 and 4)
Regards,
bubbly

Jadz_Core wrote:
RandomAccessFile? If you know where you want to insert it.Are you sure about this? If using this, the receiving file would have to have bytes inserted that exactly match the number of bytes replaced. I'm thinking that you'll likely have to stream through the second XML with a SAX parser and copy information (or insert new information) as you stream with an XML writer of some sort.

Extract data from xml file and insert into another exiting xml fil

hello,
i am searching extract data from xml file and insert into another exiting xml file by a java program. I understood it is easy to extract data from a xml file, and how ever without creating another xml file. We want to insert the extracted data into another exiting xml file. Suggestions?
Regards,
Zhuozhi

If the files are small, you can load the target file in a DOM document, insert the data from the source file and persist the DOM.
If the files are large, you probably want to use a StAX or SAX.

How to read ecel sheet and insert into oracle table

hi all,
am working on forms builder 6i. and i want , from a trigger to read from a a sheet excel file the data and insert into a table that i had aleady created.
i whrite a code that can till now open the excel file but i cant read the data to insert it into the table.
am using TEXT_IO.IS_OPEN to open the file
TEXT_IO.GET_LINE to take each line
and subst(x as variable) to read the first line , but the subsrt return nohing
any solution??

There's already a topic made on this: how to copy data from excel to oracle forms

Build a sql query fro different table and insert into a table

Hi I have a requirement ,
i have some table 1 table which holds rules which rules i have to apply on the sql query
2 table will hold table name and column name and transformation
with these help of 2 tables i want to build a sql quey and the sql query need to be insert into another table.

Hi Karthick,
I am not going to build Dynamic Data Model.
i already have table 1 contains rules let's say COUNT,
and another table contain source table name , column name , Target table name, Source Table name like that
so with the help of these 2 tables i want to build Sql query and going to insert into 3rd table.

Getting a Filename from a Directory Structure

Hi,
Our client will be sending us a Fixed Length file via FTP, each month. That file will be in a specific folder, but we will not KNOW that filename, The client doesn't want to put an header record in the file with the filename information... Is there a way in PL Sql to look in a directory and read all the filenames in there?
Thanks in advance!

Whenever you post provide your 4 digit Oracle version (result of SELECT * FROM V$VERSION).
>
Our client will be sending us a Fixed Length file via FTP, each month. That file will be in a specific folder, but we will not KNOW that filename, The client doesn't want to put an header record in the file with the filename information... Is there a way in PL Sql to look in a directory and read all the filenames in there?
>
And what good would it do to have a header record INSIDE the file that has the filename information if you need the filename to find, open and read the file? That doesn't even make sense.
You don't say what you plan to do with the file. Will you use an EXTERNAL TABLE to load the file data into the DB?
For monthly processing I use the Java procedure that Rod refers you to to do the actual directory reading. Java is much more flexible for OS operations than PL/SQL as it has extensive support for OS operations. Using Java you can easily check the file date and size to verify that this is a new file ready for loading.
After the file is loaded or processed you should have a shell script (or another Java procedure) that moves it to an archive folder if you wish to leave the directory empty and ready for the next file drop. The main problem with a design that requires an empty folder is that design is not scaleable if your requirements change and you need multiple drops and/or drops from multiple vendors.
A better archytecture is to treat the intial DROP folder as a staging area where you can perform the proper tests to make sure the file was received properly and that it is the correct file.

How to get the value from a JavaScript and send the same to Java file?

Hi.
How to get the value from a JavaScript (this JS is called when an action invoked) and send the value from the JS to a Java file?
Thanks and regards,
Leslie V

Yes, I am trying with web application.
In the below code, a variable 'message' carries the needed info. I would like to send this 'message' variable with the 'request'.
How to send this 'message' with and to the 'request'?
Thanks for the help :-)
The actual JS code is:
function productdeselection()
var i=0;
var j=0;
var deselectedproduct = new Array(5);
var message = "Are you sure to delete Product ";
mvi=document.forms[0].MVI;
mei=document.forms[0].MEI;
lpi=document.forms[0].LPI;
if(null != mvi)
++i;
if(null != mei )
++i;
if(null != lpi)
++i;
if(null != mvi && mvi.checked)
deselectedproduct[++j]="MVI?";
if(null != mei && mei.checked)
deselectedproduct[++j]="GAP?";
if(null != lpi && lpi.checked)
deselectedproduct[++j]="LPI?";
if( 0!=j)
if(i!=j)
for (x=0; x<deselectedproduct.length; x++)
if(null != deselectedproduct[x])
message =message+ "-" +deselectedproduct[x];
alert(message);
else
//alert(" You cannot remove all products!");
return false;
return true;
}

How to get the filename from J2SE File adapter

In our project scenario , we are using J2EE and J2SE engine both .J2EE for mapping and J2SE for Deliveying the message .
In one senario, routing will be based on the filename .
J2SE Sender File adapter --- XI Adapter --- XI pipe line
So the File reaching to XI pipelane via J2SE File adapter--> XI adapter.
When we are using the dynamic configurator in the XI to get the filename
we are not able to get the file name becasue it is coming to XI via
XI adapter.
How to get the filename ????Hope I am clear about the problem.

hi,
try this
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//obtengo la Key del FileName
DynamicConfigurationKey keyF = DynamicConfigurationKey.getName();
http://help.sap.com/javadocs/NW04/current/pi/com/sap/aii/mapping/api/DynamicConfigurationKey.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c89607-e4d9-2910-7280-f6746e964516
/people/mohammed.zabiulla/blog/2008/03/26/have-you-ever-tried-to-determine-mail-cc-dynamically
Hope it helps
Thanks
Rodrigo
Edited by: Rodrigo Pertierra on Apr 11, 2008 9:31 AM

Get the filename from a directory and insert into a table

Similar Messages

Maybe you are looking for