Get the following error message:
Exit Code: 15
Please see specific errors below for troubleshooting. For example, ERROR: DW051 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
ERROR: DW051: Dependency of session payload {3E7FC757-D497-4C89-A935-7D38E2164E85} Shared Technology Photoshop Camera Raw 8 8.0 has changed.
ERROR: Media DB Error : 12
what product/version are you installing or updating?
Similar Messages
-
I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?
-
I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.
Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.
-
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I am having trouble downloading Itune, icloud etc onto my Windows 7 PC and keep getting the following error message "this installation pack could not be opened, verify that the package exists and that you can access it"
tried downloading the quicktime installer, I get the same message with it too
-
I have OSX 10.7 Lion. I set up a separate email account for my wife. All of a sudden when she tries to enter and website from email we get the following error message. JavaScript; The notnull validator has already been loaded. From there we can't seem to go any where. When you hit OK it just keeps appearing and the only way to get out of it is to quit Safai. If you try and got directly to Safari you get the same error message and can't go any further. Please help.
What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54). what does this error mean and what can I do about it??
The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .
-
Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?
I have advised McAfee's product team of the problem and this thread, and they're looking into it now.
-
Airport Express- No internet connection. I am getting the following error messages- No DNS Server and Double SAT. Can anyone walk me through a fix
Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply. For 10.5/10.6 Network, highlight Interface>Advanced button>DNS tab>little + icon.
Might also put them in the Airport Express, no idea what Double SAT is!? -
Hi , I am trying to update iPod that has iOS 2.2.1 to iOS 4.2 but I am getting the following error message, "the iPod could not be restored. An unknown error occured (-1)." I would appreciate if anyone could let me know what the problem is and if it is possible how to fix it? Thanks
Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
The latest version of iTunes did not install properly on my Windows 7-64bit PC. I am getting the following error message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services."
I have tried the following troubleshooting steps without success:
Restart PC
Uninstall iTunes and attempt to reinstall
Verify that I am signed in as an administrator
Download and save iTunes64Setup file, right-click, and run as Administrator
Disable Norton antivirus software
Any suggestions would be greatly appreciated!Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
I am trying to download Firefox on my laptop which runs Vista. I am getting the following error message: Your Firefox profile can't be loaded, it may be missing or innaccessible." Please help.
See:
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Profile_in_use
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding -
I am getting the following error message "wireless network appears to have been compromised"
I am getting the following error message "wireless network appears to have been compromised"
Any information would be helpful.bclark173 wrote:
I am getting the following error message "wireless network appears to have been compromised"
Can you provide a screenshot of this message? Make a screenshot by following the directions here:
http://support.apple.com/kb/HT5775
Be sure no sensitive personal information is displayed. To add that image to a post here, click the camera icon in the post editor toolbar. -
I am getting the following error message when I try to import photos into iPhoto from my camera: "/private/var/folders/GB/GBl4wh8-ELqUVMI5dO-ryU TI/-Tmp-/iPhoto/DSCF2033.JPG". Have already tried removing and reinstalling iPhoto to no avail.
Does this happen if you try to Import to Library within iPhoto, or is it when you connect your camera (and which is set to automatically use iPhoto) that this error message occurs?
If you open Image Capture > Preferences is iPhoto selected as the choice when a camera is connected? -
I am getting the following error messages:
I am getting the following error messages:
May 29 15:31:42.404 utc: %SFF8472-5-THRESHOLD_VIOLATION: Gi1/1: Rx power high warning; Operating value: -2.0 dBm, Threshold value: -3.0 dBm.
May 29 15:41:42.974 utc: %SFF8472-5-THRESHOLD_VIOLATION: Gi1/1: Rx power high warning; Operating value: -2.0 dBm, Threshold value: -3.0 dBm.
What is the solution?Hi,
From the error decoder
Showing 1-3 of 3 results
Page: 1
1. %SFF8472-5-THRESHOLD_VIOLATION: [char]: [char]; Operating value: [char]There was a threshold violation as specified in the message.
Recommended Action: Contact your technical support representative.
Related documents- No specific documents apply to this error message.
2. %SFF8472-5-THRESHOLD_VIOLATION: [char]: [char]; Operating value: [char]There has been a threshold violation as specified in the message.
Recommended Action: Make sure that the port is active. If port does not need to be active, then transceiver ought to be removed. If port should be active, but is not, then make sure that the connection is appropriate. Sometimes, removing and reinserting transceiver might help. For all other issues, please contact technical support.
Related documents- No specific documents apply to this error message.
3. %SFF8472-5-THRESHOLD_VIOLATION: [char]: [char]; Operating value: [char], Threshold value: [char].The specified port is not connected, or it is connected to a damaged fiber optic cable.
Recommended Action: If the message relates to an enabled but unconnected DOM transceiver, shut the port to stop the alarm messages. If the alarm persists, or relates to an enabled and connected transceiver, contact your Cisco technical support representative.
Related documents- No specific documents apply to this error message.
Hope this helps
Regards
Alex -
i am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/Firefox/components/ref helper.JS:510 in English
ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"
Maybe you are looking for
-
How to get editable value from thtmlb:tableView
Hi, I create a tableview using tag thtmlb:tableView and set column editable. Now the value in the tableview can be changed, but I don't know how to get the changed value from tableview. Pls help me. thanks in advance!
-
To view the list of users in Satellite Systems from Solman
Dear Friends, We wish to view the list of users in a satellite system (say ECC5.0) from solution manager 4.0, can anyone help us to find the same. Regards Senthil
-
Popup for entering Reason for Rejection
Hi Experts, I have a workflow which has a user deciision step for approval and rejection. On rejecting i want a popup to appears where in user can select the reason for rejection and then exceute the workitem. I have tried using POPUP_GET_VALUES . I
-
didn't get any proper answer yet
-
Nickname caché in C# VS 2013 for Outlook 2013.
I use VS 2013 and Outlook 2013. How can I manage Nickname caché and contacts from Outlook using C# in Unit Test Project in VS 2013 ? About it, any step-by-step guide, or Getting Started - Quick Start that can be completed in 15-20 minutes? I get you