Get the header in centre,make bold, change font in hierarchical alv  list

Hi all
I need to get the following header in the centre for hierarchical alv list:
ex:
                                                                          General Ledger                       -
want it to be bold
                                                                           July 2009                                -
  want to change font to be less than 1st  line
Please help me to achieve this.
I have  got the header in the middle using write statements in top of page.
But am not able to get it bold and change the font.
Thanking in advance.

Hi all
I need to get the following header in the centre for hierarchical alv list:
ex:
                                                                General Ledger   ( want it to be bold)
                                                                 July 2009            (want to change font to be less than 1st  line )
Please help me to achieve this.
I have  got the header in the middle using write statements in top of page.
But am not able to get it bold and change the font.
Thanking in advance.

Similar Messages

  • Case number  0123115765 ser no serial numbers removed send me the download of the mac version please. You are the most troublesome to make a change did the same with Norton they handled it over the computer without

    case number  0123115765 ser no <serial numbers removed> send me the download of the mac version please. You are the most troublesome to make a change did the same with Norton they handled it over the computer without any fuss!!! Regards answer via email what to do! Regards Bo

    Call Apple to get the replacement DVD > http://support.apple.com/kb/HE57 When you have the DVD, insert it and install iPhoto. Finally, open  > Software Update and install the most recent version

  • HT5570 I am not getting the verification email ... i changed from yahoo to a gmail for apple id...have sent it several times and I'm not receiving in gmail

    I am not getting the verification email ... i changed from yahoo to a gmail for apple id...have sent it several times and I'm not receiving in gmail

    Did you check your gmail account to see if it is working OK?
    Are you sure you didn't make a typo when you entered the gmail address as a change?

  • *** How to get the username in a custom password change routine....

    How to get the username in a custom password change routine / procedure / form when a user's password has expired and is redirected automatically to this custom program?
    We use the 2nd parameter in LOGIN_URL column in WWSSO_LS_CONFIGURATION_INFO$ table to get to this custom change-password proc.

    OK !
    Use that maybe good :
    select USERID into v_user from sys.aud$
      where ntimestamp#=(
      select max(ntimestamp#)
      from sys.aud$ );

  • Table in which if I put the delivery number ..I should get the HEADER TEXT

    Dear Members,
    I am checking for a table in which if I put the delivery number ..I should get the HEADER TEXT. Does such table exists or a Z report shoudl be created for this kind of setup.
    Regards,

    Hi,
    There are two Tables in which the texts will be stored
    One is STXH -
    TEXT HEADER
    other   STXL------- TEXT ITEM
    If you want to get the Header text then input the values in the table
    In STXH
    TEXT OBJECT     is    VBBK
    TEXT NAME      is      DELIVERY NUMBER
    TEXT ID             is       ZS01  ( this is the standard ID for the  Header note 1 )
    Now goto SE37 and give the Function Module READ_TEXT and maintain all the above details and get the TDLINE Which contains the TEXT of the Delivery
    regards,
    santosh

  • Is there any report to get the header/item text at GR stage together?

    Hi gurus,
    Is there any report to get the header/item text at GR stage together with a date range?
    at the point of goods receipt?  Or a report that could be run to search for header/item text at GR stage together with a date range?
    Text that was entered at the point of goods receipt?

    Hi
    Check MB51 report with posting dates for materials/vendors and use the display variant document header text (which is GR header text). I hope this is the one you are looking for.
    Thanks

  • When I OCR two versions of the same document and then compare th documents in Acrobat Pro XI, I usually get the message that there are no changes to mark.  However, I know there a quite a few number of changes.  I raised this question more than a year ago

    When I OCR two versions of the same document and then compare the documents in Acrobat Pro XI, I usually get the message that there are no changes to mark.  However, I know there a quite a few number of changes.  I raised this question more than a year ago, and the response I received had to do with the quality of the OCR and the scans of the documents.  However, if I use Acrobat Pro XI to save the same documents in Word and then run a comparison in Word all of the changes are marked.  When a PDF is saved as a Word document in Acrobat Pro XI, is a different OCR module being used than the one used in Acrobat Pro XI for text recognition?

    OCR is only for recoginition of the image / picture of text provided by an scanner.
    Content typed into a Word file which is converted to a PDF is (in Word and in PDF) *not* an image  or picture of text - it is the digital text. So, no OCR involved.
    When the "digital" (renderable) text of a PDF's page content is exported to Word no OCR is involved.
    When a PDF's content is from the image output of a scanner and this is a picture of text then OCR comes into play.
    If this content is exported to Word before doing OCR then it is the image that is exported to the Word file.
    Once OCR is performed it is the OCR output that is exported.
    OCR output is (always will be) impacted by "the quality of the OCR and the scans of the documents". 
    Regardless "Compare" is based on a Word file output to PDF1 then edits to the Word file followed by an output to PDF2. You use Acrobat Pro to do a compare of PDF1 & PDF2.
    Paper 1 scanned to image 1 to image 1 in PDF1 that gets OCR 1 and
    Paper 2 scanned to image 2 to image 2 in PDF2 that gets OCR 2
    being processed with Acrobat Pro's Compare can certainly be done.
    But - well you've described what can be observed.
    Be well...

  • Z-Report for PR using ES language not getting the Header and Item text deta

    Hi,
    We have developed Z report for PR report and we ahve used ES and EN language, but when i select language ES and execute the report then we are not getting the Header and Item text data,
    Secondly when We select language EN and execute the report then we are getting the Header and Item text details.
    Please guide me.
    Thanks
    Shital

    Have you maintained Tetexxt in ES language or is it that you are expecting  on selecting ES the text from En will get coverted to ES and display in your report?

  • I need a Functional module to get the header material from the component .

    Dear Guru's
    Please help me .
    I need a name of the Functional module to get the header material from the component .
    As in if I put the Component in the Input I should get ALL the Main header materials using this Component.
    Regards,
    Roshan Lilaram Wadhwani.

    This was not answered

  • How to get the header to downloading fine

    Hi,
    i am downloading xl file for which i need to get the header.i doesnt no the fieldnames.how to get the header for entire file.

    Hi,
    For this please create an internal table for field names and pass it to FM' WS_DOWNLOAD'.
    Sample code:
    * internal table for headers
    DATA : BEGIN OF it_fieldnames OCCURS 0,
           name(100),
           END OF it_fieldnames.
    g_fname = 'C:\Documents and Settings\kut3kor\Desktop\kar4.xls'.
    *populate the internal table
    it_fieldnames-name = 'Material Number'.
    APPEND it_fieldnames.
    it_fieldnames-name = 'Material type'.
    APPEND it_fieldnames.
    it_fieldnames-name = 'Material group'.
    APPEND it_fieldnames.
    CALL FUNCTION 'WS_DOWNLOAD'
    EXPORTING
    *   BIN_FILESIZE                  = ' '
    *   CODEPAGE                      = ' '
       FILENAME                      = g_fname
       FILETYPE                      = 'DAT'
    *   MODE                          = ' '
    *   WK1_N_FORMAT                  = ' '
    *   WK1_N_SIZE                    = ' '
    *   WK1_T_FORMAT                  = ' '
    *   WK1_T_SIZE                    = ' '
    *   COL_SELECT                    = ' '
    *   COL_SELECTMASK                = ' '
    *   NO_AUTH_CHECK                 = ' '
    * IMPORTING
    *   FILELENGTH                    =
      TABLES
        data_tab                      = gt_mara[]
       FIELDNAMES                    = it_fieldnames[]
    * EXCEPTIONS
    *   FILE_OPEN_ERROR               = 1
    *   FILE_WRITE_ERROR              = 2
    *   INVALID_FILESIZE              = 3
    *   INVALID_TYPE                  = 4
    *   NO_BATCH                      = 5
    *   UNKNOWN_ERROR                 = 6
    *   INVALID_TABLE_WIDTH           = 7
    *   GUI_REFUSE_FILETRANSFER       = 8
    *   CUSTOMER_ERROR                = 9
    *   OTHERS                        = 10
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards,
    Karuna.

  • After a recent update I'm only getting the header but no text on incoming email. Please help.

    I'm only getting the header and not the text of incoming email messages on my iphone 4. How can I get the text?

    Try settings>mail, contacts, calendars>mail>preview and alter to how many lines you wish to preview.

  • Does the iPad2 get the new notification centre with iso6?

    Upgraded my iPad2 to iso6 and I can't see Facebook in my notification centre, does the iPad2 get the new notification centre with iso6?

    Hello, can you please help me ?
    You specified sample payload here:
    TerrellFromLockhart wrote:
    I finally got this to work. The picture in the Programming Guide is very confusing. The solution was to prefix every message's frame data with command 2 and that messsage's frame data length. Here is a sample:
    ANS frame: 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 4 4 0 4 83 7 199 195 5 0 1 10
    About to read response at Thu Feb 20 15:40:20 CST 2014
    SocketTimeoutException
    2 - is clearly command
    0 0 0 77 - frame length
    1 - item Id
    what's 0 32 ? According to this page https://developer.apple.com/library/ios/documentation/NetworkingInternet/Concept ual/RemoteNotificationsPG/Chapters/Commu…
    Item id  should be followed by item length. But item length is obviously greater than 32 because device token's length is 32. Can you please explain why 0 32 were used? and do you have any insight on item id meaning ?

  • I have been getting the wierdest, most ridiculous issues using PP 2014 here is a list:

    i have been getting the wierdest, most ridiculous issues using PP , 2014 here is a list:
    unsyncing single-source a/v when aplying effects.
    exporting the resynced clip to an even more out-of-sync clip
    freeze frame. when applying stabilizer, clip will just stall on a frame whereas before the effect, it didn't
    losing 2-3 hours of work due to auto-save failure. quitting premiere like normal but still having to force quit
    ramdom green frames that just suddenly appear
    constant crashing
    crashing without auto saving
    severe artifacting
    timeline, source, project thumbnails won't play
    toggle to previous/next edit point won't work
    significant, work-hidering issues in 90% of my project that collegues have never heard of
    pefferences will suddenly change. auto-save set to every 5 minutes and 100 versions will reset to default and audio scrubbing has just turned off
    no video, sound only during playback. freeze framing during playback
    pasting an item other than what was copied. copied a mask, pasted and mask of diferent size and shape
    inserting single frames between clips that i didn't add
    mixing unused video during transitions
    mixing unused video into masks.
    the above image is a mask that is being distorted by the image on the left below but it is only occuring in the mask.
    media pending sceen remains long after all content is loaded
    artifacting in the form of green pixel fields after exporting
    these issues are seriously hindering my ability to work. failed solutions i have run thru are:
    closing and reopening PP
    deleting render files and re-rendering
    replacing the distored clip with a  fresh clip
    rebuilding the mask
    restarting my computer
    PRAM and smc resets
    uninstalling and re-installing PP
    what is going on???

    Hi DV,
    Sorry you are having issues. FWIW, I also run a Mac and do not have these issues - however, I am still running OS X 10.8.5 on my personal machine.
    First of all, we need a lot more info: FAQ: What information should I provide when asking a question on this forum?
    deadvessel wrote:
    i have been getting the wierdest, most ridiculous issues using PP , 2014
    You say you are using "PP 2014," however, that is not precise enough. Which version of Premiere Pro CC 2014 are you using? 8.0.1, 8.1, or 8.2? Choose Premiere Pro > About Premiere Pro and look at the bottom of the dialog box. That will give you a precise version number.
    deadvessel wrote:
    Here is a list:
    Indeed, that's quite a list. My first suggestion is that you check out this article and perform the fixes there, if necessary: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later) Are all the permissions set correctly?
    The other issue I see a lot is needlessly updating a project file in the middle of a project. The advice here is to avoid updating a project file to a new version of Premiere Pro as you work on it. Update before a new project is created.
    Try a test: update to Premiere Pro CC 2014.2 (8.2) and create a brand new project. Does it work better now?
    Thanks,
    Kevin

  • How to create space between Header text of Hierarchical ALV List.

    hi,
    I am display data using Hierarchical ALV List.
    In Perform of field catalog, I am writing this code:
    PERFORM fill_catalogue USING :
         'CHKBX'      'T_HEADER' 20  'Sess Decision Box'(t19) 'X',
          'SESS_NO'    'T_HEADER' 11  'Session'(t20)           ' ' ,
          'SESS_STAT'  'T_HEADER'  4  'Status'(t39)            ' ',
          'HOLD_STAT'  'T_HEADER'  4  'HOLD'(t52)              ' ',
          'ICON'       'T_HEADER'  9  'Tracking'(t21)          ' ' ,
          'CREATE_DT'  'T_HEADER' 10  'Archiving Date'(t22)    ' '  ,
          'AGING'      'T_HEADER' 50  'Aging'(t23)             ' ',
          'OBJECT'     'T_HEADER' 12  'Archive Obj'(t24)       ' ',
          'HOLD_INFO'  'T_HEADER' 100 'Hold Reason'            ' ' ,
          'YFY_DATA'   'T_HEADER' 4  'Data Fiscal Year'(t48)  ' ' ,
          'COMMENTS'   'T_HEADER' 50  'Session Notes'(t26)     ' ' ,
          'DATATYPE'   'T_HEADER' 50  'Archive Object Description'(t25) ' ',
          'APPR_STAT'    'T_ITEM' 16  'Approval Status'(t29)   ' ',
          'DESTR_DT_REV' 'T_ITEM' 10  'New Date'(t30)          ' ',
          'REJCT_REASON' 'T_ITEM' 60  'Rejection Reason'(t31)  ' '  .
    At output of this program , there are two rows in HEADER details.
    I want text 'Session notes' of 2nd row  under 'Archiving Date' of 1st row.
    For this i have to create space between 'Data Fiscal Year' & 'Session notes' text.
    How i can do this.
    Regards,
    Mamta

    Hi,
    You can use TOP-OF-PAGE event and pass this event to Hierarchical ALV FM.
    Thanks,
    Kartavya Kaushik.

  • Help required in getting the header details.

    Hi All ,
    In my first WDA , I am showing the header details of Purchase Order for a input parameter  in table
    and now I want to show the items details for that particular PO on lead selection of the the PO details
    in my second application . How can I achieve the desired functionality .
    Please help , any pointers regarding this ..
    Thanks in Advance.

    Hi ,
    U need tto get the URL of the called application through method
    construct_wd_url and generate the popup window for the second application with the above URL .
    in ur first app , crate an event on lead selection of the table and write the following piece of code :
       DATA:
          w_url   type string,
          w_value type string.
             call method cl_wd_utilities=>construct_wd_url
            exporting
            application_name              = u2018 u2018 // here specify the name of the called application
          importing
            out_absolute_url              = w_url.
       * make the Value type compatible that has to be passed with the URL
      w_value = lv_ebeln.
    * Attach the parameters and its value with the URL that
    * have to be passed to the 2nd application
      call method cl_http_server=>append_field_url
        exporting
          name  = ' '   // input parameter here
          value = w_value
        changing
          url   = w_url.
    * generate a popup window for the 2nd application with the above URL
      DATA lo_window_manager TYPE REF TO if_wd_window_manager.
      DATA lo_api_component  TYPE REF TO if_wd_component.
      DATA lo_window         TYPE REF TO if_wd_window.
      lo_api_component  = wd_comp_controller->wd_get_api( ).
      lo_window_manager = lo_api_component->get_window_manager( ).
      lo_window         = lo_window_manager->create_external_window(
                       url = w_url ).
      lo_window->open( ).
    Now in the doinit of ur called application , u can get the value for that particular input parameter
    [code}
    DATA:
      lv_param type string.  
    lv_param = wdr_task=>client_window->get_parameter( ' u2018  ).  // paramtr name
    Now select the appropriate values in internal table for this and bind it to ur context node ..
    I hope this helps..

Maybe you are looking for