Get the Print Status of Reports - D2k/Reports Ver.6
Dear sir,
We are developing all the systems with oracle products. We are facing following technical problem in reports version 6.
1. During continuous cheque printing and pay slip printing in a pre-printed paper, kindly suggest what is the command/procedure to be used for printing sub-sequent pages continuously without any misalignment.
2. After the cheques/pages are printed, we have to identify printed cheques/pages status thro' the reports so that we have to update proper tables based on the printed cheques/pages.
We are badly need the solution for the above problems. Our development activity is standstill due to the above problems. I am expecting expedite reply.
With Regards.
(P.JEYAKUMAR)
PROJECT LEADER, ERP.
Printing checks & recording payments is a bit tricky but can be done with triggers and proper formating.
Too bad you aren't interested in hearing the solution from a mere woman.
Similar Messages
-
Hi all
After the output is displayed with ALV ,I have the following requirement
A status field will be found at the end of the row and will reflect the current status of the print documents. After printing occurs, the screen should refresh and processing status reflected to show post-print status. The user will then be able to see what documents printed immediately. Any documents that did not successfully print will need to be reprinted through the .PDF files stored in the shared directory.
I am unable to proceed further
Pointers would be helpful
Thanks in advance
Regards
NikhilNikhil,
Try going through this table TSP02L.It may give you some lead.
As well as go to DD02T table and give as spool in DDTEXT field so that you will be able to see all the spool related tables.
K.Kiran. -
Get the current pageno at runtime in Report 6i
Hi to everybody,
I wish to know how can i get the current pageno at runtime in report 6i ,
i want to display data at end page of the report on a condition that it is the last page of the report. i can get the last page but not the current page no at runtime.Take a look into SRW.GET_PAGE_NUM. You can use this in format trigger and It will return you current page number.
-
HT4865 i lost my phone where can i get the serial number for a police report
My phone was recently stolen. Where can I get the serial number for a police report?
It would be on the box it came in. It would also be on your support profile is you ever signed up for one (here: https://supportprofile.apple.com). Finally, if you ever synced it with iTunes on your computer you can find it by doing the following:
Launch iTunes on your computer.
Hold down your Control key, then on the menu bar in iTunes click iTunes>About iTunes (Mac) or Help>About iTunes (PC).
Any previously synced devices will scroll in a pop-up window; press the space bar to stop scrolling so you can write down the serial number. -
Query to get the Deployment Status of an application - SCCM 2012
Hi,
Do we have any query/report to get the detailed status report & machine name, user name of a deployment in sccm 2012 as in sccm 2007, instead of clicking on each deployment status to find the machine names and status details?
Regards,
Mike.Hi,
You could have a look the report -"All system resources for a specified package and program deployment in a specified state".
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Getting the Latest status with respect to DATE entered
Hi guyz, kindly help me in this scenario:
I have a DSO and a CUBE....
DSO:
cust
status code
status date
RAW DATA
cust status code status date
payer1 1 12/31/2013
payer1 3 1/3/2014
payer2 4 12/15/2013
payer2 2 1/10/2014
CUBE:
cust
0calday
qty (KF)
RAW DATA
cust 0calday qty
payer1 1/1/2014 10
payer1 1/2/2014 20
payer1 1/3/2014 30
payer1 1/4/2014 40
payer1 1/5/2014 50
payer2 1/1/2014 60
payer2 1/2/2014 70
payer2 1/3/2014 80
payer2 1/4/2014 90
payer2 1/5/2014 100
I need to have this report: (for example I entered 1/1/2014 - 1/5/2014)
cust status code 0calday qty
payer1 1 1/1/2014 10
payer1 1 1/2/2014 20
payer1 3 1/3/2014 30
payer1 3 1/4/2014 40
payer1 3 1/5/2014 50
payer2 4 1/1/2014 60
payer2 4 1/2/2014 70
payer2 4 1/3/2014 80
payer2 4 1/4/2014 90
payer2 4 1/5/2014 100
Is this possible in query? Or do I need to do this in start routine?
By the way, I can already show the QTY figures, I used CONSTANT SELECTION..My problem now is how to the STATUS CODE..How will I do this?
Thank you!
LoedLoed,If you are flexible with modeling level changes then i would suggest to stamp the values of status and status date against payer in cube.
Add the two objects ion cube.Do a lookup on the DSO from cube in End routine and based on payer fetch the value of status and status date against each payer.
Now once you have the complete data in the cube then at reporting level to get the correct status based on the validity dates you can refer my blog.
Status of Tickets based on their Dates
PS:If you need assistance in the coding part then let me know.
Regards,
AL -
How to Get the Print of General Ledger with Opening balances
Hi Friends.
How can I get the print out of G.Ledger with all line item transactions and opening balances in a company code?
Please explain.
Regards.
Srinihi
for line item-
goto s_alr_87012282 and select menu bar "list">print
for g/l statement
goto s_alr_87012332 same step above
rgs -
How to get the Shipping status of a Invoice items in SAP?
Hi All,
Is there any way to get the Shipping status of a Invoiced Item ?
While i extracting Sales Invoice lines,i can get the shipping method and the shipping date,how can i confirm whether the item is shipped or not?.
Is there any table which contains the shipping status or any column in Invoice lines(INV1) which contains the shipping status?
Please help me to come out from that problem
Thanks
JanakiRamanHello Gilbert,
The column what you specified INV1.TRNSCODE is to know how the shipping was done. My question, Is there any field to specify the material was shipped or not?
Thanks
Janakiraman -
How do I get the printer driver for a hp officejet 6500 e709n?
How do I get the printer driver for a hp officejet 6500 e709n? When I add the printer, Apple says the software is not available and to contact the manufacturer. HP says it is available from Apple.
Hi Robmtu,
You can find the direct download here. -
To get the User status of the Production Order
Dear all,
I have a requiement to get the user status of the production order, This is just below the Status of the Production Order,
I was able to get the Status of the Production order using the Function Module ( REL MSPT PRC ) etc
Can any body please help me in fetching this data.
with rgds
Ranjith SinghDear,
Please try with,
FM 'STATUS_TEXT_EDIT'
Or See function module PM_ORDER_DATA_READ
The status maintenace is done by SAPLBSVA
Use the Tables are :
JEST - Pass OBJNR of the Production ORDER (AUFK, AFKO tables)
or from
TJ02
TJ02T
Please take help from technical consultant.
Hope it will help you.
Regards,
R.Brahmankar -
I cant print i get the printer spool service message
i have pavallion a1737c and i cant print!!! i get the printing spool service is not running, i have tried to turn on the spooler in the services area but no luck, can someone please help
Norton cancelled their protection. My printer spool went with their cancellation. Now it doesn't work.
-
I have taken the firefox updates when offered to 4.4. I have the browser as an aside to Internet Explorer 9 as a backup browser. When I use Firefox I am being told my system is not up to date and I need a newer version. I download the version and keep getting told I am not current with firefox. When Firefox DOES work I cannot get any printer icon or settings to enable and allow the printing of a page. I have to use IE9 to get the printer to work. Using eBay I cannot get the uploading of pictures from my computer to consistently operate even though I use small JPG files under 500KB.
There are a lot of IntelliTXT like ''ad'' pop-ups possible.
If your current Adblock Plus filter settings aren't blocking some pop-ups then it is best to take this to the Adblock Plus forum.
* https://adblockplus.org/forum/
* http://en.wikipedia.org/wiki/Category:Internet_advertising_services_and_affiliate_networks
* http://en.wikipedia.org/wiki/IntelliTXT -
How to get the printer button to appear
The buttons on my printer should say scan, copy & print.
They are now saying scan, copy & copy. how do I get the print button back, as I cannot printHi,
What is the exact printer model? is it the HP Photosmart C4385?
The following model does not provide any fax capabilities as you may find by its datasheet below:
http://cdn.cnetcontent.com/b6/14/b6144c8e-0a16-4ce3-a66d-2eb03e86f4d9.pdf
If I misunderstood your pritner model, please clarify the exact model.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
I am using AI CS2 on an eMac and cannot get the print menu options to recognize the print features l
I am using AI CS2 on an eMac and cannot get the print menu options to recognize the print features like? I need to use mirror feature and high quality printing and it will not work.
jdanek
It is an eMac. I have a corrupted font book. How can I fix/re-install/or download a new font book app? Most fonts that were in it work, some do not, but I cannot open it nor can I install fonts into it. This happened after the eMac OS was upgraded from 10.3.9 to 10.4.11 and AI was upgraded to CS2
Kind regards,
Steve Mosher
Village Graphics LLC
438 Troy Loop
The Villages, FL 32162
352-409-6853
[email protected] -
FM for getting the SYSTEM STATUS in pp order.
hi,
i wnat to know what is the FM used to get the SYSTEM STATUS in pp order.
and the parametes needed t be passed.HI,
1. go to tcode BS22 (Maintain: System Status)
2. look for the system status TECO.
3. Double click the field "TECO".
4. in the transaction control tab look for the business transaction "RMWA" or goods movement (you can type it in the lower left corner buttom box).
5. select the radio button from "Allowed" to Disallowed".
6. save your changes.
Here are the function moduels:
SYSTEM_STATUS
UPGI22_GET_SYSTEM_STATUS
UPG_GET_SYSTEM_STATUS
TMS_CFG_GET_SYSTEM_STATE
Regards
Sudheer
Maybe you are looking for
-
App-V 5 Client + Office 2013 (Administrator OK, user Not OK)
Dear MS, I've installed App-V environment onto our Windows 2008 RDS farm with your tech documents successfully. Then I test it with a simple sequenced app (Mozilla Firefox and XML notepad) and it ran successfully. I've also sequenced Office 2013 with
-
Why can I not open some previous documents in Pages?
Help! I can not open previous documents in pages. It is instructing me to download the latest, when I do try, it tells me the most current has been installed? I still can not open the documents?
-
Oversea buyer using credit card in Apple store??
Dear Apple, May I ask a question?? I am a fan of Apple who live in Taiwan. iPhone 5 has just been announced and I love this product very much.I decide to buy one. However, Taiwan have not started to sell it. So, I ask one of my friend who l
-
Is it possible to call ctx_doc.filter from Java?
Hello all, Is it possible to call ctx_doc.filter from Java? If so, do you have a code sample? Thanks, Marvin
-
A few days ago I upgraded to Snow Leopard without any problems; today I installed iWork for the first time. Just now, I left the laptop open while I charged my iPhone, and when I came back after about 20 minutes, I had a message saying that my Start-