Get the the host process details on OEM 12c

On Oracle Enterprise Manager - OEM 12c how to get the list of active process details.
What i look for is Unix command output
ps
We had that feature on OEM 11g
Hosts --> Performance --> Process

Hi,
This can be accessed by navigating to >> 'Host' drop-down menu >> 'Monitoring' >> 'CPU Details' >> look under 'Top 10 Processes (ordered by CPU)'.
Best Regards,
Ahmed

Similar Messages

Getting error when running process flows in oem

Hi all,
I'm trying to run a process flow in oem (using oem_exec_template.sql script), but it keeps failing with error "nms-1013: sqlplus does not exist". I tried running a map too and it failed with same message.
Any idea anyone?
Thanks!
Yanet

Hi,
Looks like you have an obvious code error, invalid cast operation in your code. Do you get this error when running in local emulator.
You can try the following article on how to debug published cloud service, assuming you have VS ultimate.
https://msdn.microsoft.com/en-us/library/azure/ff683671.aspx
Regards,
Nithin Rathnakar

When I install a host agent on my OEM 12c the status of the agent and host target in the OEM is stuck in pending. The agent is up and can ping the OMS. I haven't been able to locate any relevant errors in the logs

Sum
General
Upload Metric Data
Status
Status Pending
Availability (%)
Unavailable
Host
Version
Platform
Operating System
Operating System Agent Username
Unavailable
Interaction with Management Service
Upload to
Unavailable
Last Successful Upload
Unavailable
Agent to Management Service Response Time (ms)
Unavailable
Agent Upload Interval (minutes)
15
Detailed Status
Restarts (last 24 hours)
0
Secure
Unavailable
Agent Collecting
Unavailable
Agent Backed Off
No
Agent Purging Data
Unavailable
Above is the display from the agent page on the OEM console.
I have also checked the agents page and confirmed that the agent is not Blacked Out.

Hi Krishnan,
emctl unsecure agent fails with the error:
[15-04-2015 16:28:19] USERINFO ::Checking Agent for HTTP...
[15-04-2015 16:28:19] USERINFO ::   Done.
[15-04-2015 16:28:24] USERINFO ::Agent is already stopped...   Done.
[15-04-2015 16:28:24] USERINFO ::Unsecuring agent...   Started.
-115-04-15 16:28:25,294 [main] INFO agent.SecureAgentCmd openPage.871 - Opening: https://usatl-w-cmcloud.americas.abb.com:1159/empbs/genwallet
2015-04-15 16:28:29,521 [main] INFO agent.SecureAgentCmd openPage.897 - Response Status Code: 200
2015-04-15 16:28:29,523 [main] INFO agent.SecureAgentCmd openPage.905 - RESPONSE_STATUS header: OK
2015-04-15 16:28:29,525 [main] INFO agent.SecureAgentCmd openPage.906 - Response body: -1
2015-04-15 16:28:30,311 [main] INFO agent.SecureAgentCmd openPage.871 - Opening: https://usatl-w-cmcloud.americas.abb.com:1159/empbs/genwallet
2015-04-15 16:28:32,258 [main] INFO agent.SecureAgentCmd openPage.897 - Response Status Code: 200
2015-04-15 16:28:32,261 [main] INFO agent.SecureAgentCmd openPage.905 - RESPONSE_STATUS header: OK
2015-04-15 16:28:32,262 [main] INFO agent.SecureAgentCmd openPage.906 - Response body: -1
[15-04-2015 16:28:32] USERINFO ::OMS is locked. Cannot unsecure the Agent.
[15-04-2015 16:28:32] USERINFO ::Unsecuring Agent... Failed.
The OMS is on a Windows 7 VM. Do you know the command to unlock the OMS?
Thanks,
Jerald

Office 2013: Windows host process (Rundll32) has stopped working

Hi,
I have problems with adding additional e-mail address to my Outlook. When I open the Mail Control Panel Item, go to my Exchange Profile and add a new e-mail address I get a popup indicating that the Windows host process (Rundll32) has stopped working.
The only way of adding extra e-mail addresses is to remove my entire Outlook Profile. In the initial wizard I can add all Exchange mailboxes that I need (I have 3). After I've configured my Outlook profile I always receive the Rundll32 error. When I try
to create a second Outlook profile I still get the same error.
I've tried the following:
- Repair OST file
- Repair Office -> Control Panel and Online Repair
- Reinstall Office
- Reinstall my entire PC
It doesn't matter which e-mail address I add in the initial Outlook configuration wizard. I always receive the error when I try to add a new mailbox, even when I add a mailbox that does not exist (e.g. [email protected]).
Even after reinstalling my PC I still get the same error. I'm using Windows 8.1 (x64) and Office 2013 (32-bit) on a Lenovo W540. None of my colleagues have this issue. It's a domain joined PC and we are not using Roaming Profiles.
For troubleshooting I also created a local account on my laptop but I get the same issues with this account.

Hi,
I'm also using Office 2013 32-bit and Windows 8.1 64-bit on my computer but doesn't get this issue. As you mentioned you reinstalled your PC, the first thing I suggest is to make sure your Windows and Office have been up to date.
The second thing is to make sure you are using the system with an administrator account, this ensures you the enough permission.
There is a possibility that some 3rd-party programs are interfering with "Mail", we can try to perform a clean boot to determine whether background programs are interfering with this:
1.Swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click
Search.
2.Type msconfig in the search box, and then tap or click
msconfig.
3.On the Services tab of the System Configuration
dialog box, tap or click to select the Hide all Microsoft services
check box, and then tap or click Disable all.
4.On the Startup tab of the System Configuration
dialog box, tap or click Open Task Manager.
5.On the Startup tab in Task Manager, for each startup item, select the item and then click
Disable.
6.Close Task Manager.
7.On the Startup tab of the System Configuration
dialog box, tap or click OK, and then restart the computer.
If in clean boot the issue doesn't exist, the issue was probably caused by the 3rd-party programs. For further information to troubleshoot, you can refer to this kb below:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Generic Host Process For Win32 Services Has Encountered a Problem and Needs to Close - J6480

Computer: eMachines T3025 Athlon
OS: Win XP SP3 (recent clean install)
Printer: HP J6480 on wireless network
Printer prints and scans fine wirelessly. I am using the "small footprint" HP drivers to print and scan.
After some hours with printer connected to the computer wirelessly and printing or scanning, I eventually get the
'Generic Host Process For Win32 Services Has Encountered a Problem and Needs to Close' error message and cannot print or scan any longer unless I shutdown and restart Windows.
I have implemented all the fixes (download, reinstall, etc.) listed for this printer on the hp.com site - namely
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00273968&tmp_task=solveCategory&lc=en&dlc=en&cc...
with the exception of changing the firewall setttings to allow hpqtra08.exe to run. This file is not found on my system in my install. The files that are allowed to bypass the firewall are shown below (duplicates listed as shown on my screen)
hpoews01.exe
hponicifs01.exe
hponicifs01.exe
hponicifs01.exe
hposid01.exe
hpqkygrp.exe
hpqtax08
hpznui08.exe
hpznui08.exe
hpznui08.exe
Per the Firewall bypass instructions, the files available in the Digital Imaging\bin location on my machine are
hpiscnapp
hpoews01
hposid01
hposvc08
HpqApKil
hpqkygrp
hpqpprop
hpqqpawp
hpqtax08
hpqtbx01
HPqTrMgr
hpqwrg
hpsjrreg
What else do I need to do to solve this problem once and for all ?

Hi,
Please try to update the hot fix then monitory the status again, at same time that error ome times also can cause by virus infection some time please back up important files
update your AV soft then scan the virus.
The relate hot fix:
The Service Host process may stop unexpectedly in Windows Server 2003
http://support.microsoft.com/kb/932762/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error message: Host process for windows services stopped

I recently had to install a new hard drive into my laptop. I am running windows vista and have installed all updated drivers. After installing itunes and uploading my backed up library, I went to play a song and I got the error "host process for windows services stopped working and was closed." Movies play fine. I have searched but have not found anything. Any help would be greatly appreciated.

Q I just upgraded to a new mobo and CPU, the EVGA X58 SLi and i7 920, and this issue still persists! That means it is either the sound card or Steam. The drivers on the CD have no issues, only the newer ones do. So by deduction there is something wrong with the new drivers, but I need them to not BSOD in OpenAL!

Host process rundll32 has stopped working while Installing BPC 7.5

Hi guys,
while installing BPC on Windows 2008 R2, the installation programs shows the message
Host process rundll32 has stopped working.
According to SAP Note 1498480 - Windows host process (Rundll32) has stopped working, i have followed the recommendations:
32bit Compatibility Mode ON
C:\inetpub\AdminScripts>cscript.exe adsutil.vbs set W3SVC/AppPools/Enable32BitAp
pOnWin64 "true"
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Enable32BitAppOnWin64 : (BOOLEAN) True
Also disabled the Data Execution Prevention (DEP) and rebooted server.
Then tried reinstalling IIS 7.0, rebooting the server, instaling it again but still showing the same error message.
Any futher help on this would be highly appreciated.
Regards!

After a few restarts it worked

Generic Host Process failure on battery boot

When I boot on battery 'DEP'(data execution prevention) closes the Generic Host Process for Win32 Services.
I had a blue screen first but changed the gv3.sys driver from the Intel Pentium M processor to intelppm.sys.
I'm not having the blue screen any longer but the Gen host problem is still there...

Hi enos
I am not sure if this forum is the right one for this kind of problems is. First of all it will be interesting to know which notebook model you have and if the SP2 was preinstalled on your unit.
I suppose that you have much experience but just one interesting site from Microsoft
http://support.microsoft.com/kb/875352

Error when login windows 2003 server: Generic host process for win32 services has encountered a problem and needed to close

Hello, Yesterday I've upgraded from Windows Server 2003 R2 Standard x86 to Enterprise. After upgrade I had to download and reinstall all updates about 130. The error from the topic title appears at logon. Another thing is Automatic Updates won't start
and because of this other services that are set to Automatic just stop. Here is the list of services: Application Management, BITS, COM+ Event System, Cryptografic Services, Distribuited Link Tracking Client, Help and Support, Logical DIsk Manager, Performance
Logs and Alerts, Server, Shell Hardware Detection, Workstation .... Error print screen: http://i.imgur.com/QPpMV6w.jpg appcompact.txt can be viewd here: http://textuploader.com/1bow Need to solve this issue asap, thank you in advance.

Hi,
Please try to update the hot fix then monitory the status again, at same time that error ome times also can cause by virus infection some time please back up important files
update your AV soft then scan the virus.
The relate hot fix:
The Service Host process may stop unexpectedly in Windows Server 2003
http://support.microsoft.com/kb/932762/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

OEM 12c WLS Console?

I am having issues finding the console address for the WLS/Admin server running behind OEM 12c. Is there a log file this is documented?

Hi,
You can find the URL in <OMS Home>/install/setupinfo.txt.
Regards,
- Loc

Getting error"Broker Client is no longer connected to the Broker Host"

HI Guruu2019s,
I'm trying to featch Data from SAP using IDOCs in Real Time Job. I have configured Real-time service ,Client Interface and RFC details successfully .also I start my Real-time service, it is showing green symble -" Weating for Idocs "
when start Idoc process from SAP system ,I'm getting below Error-
*"Broker Client is no longer connected to the Broker Host AGLSAPSBXARDDB1:4000"
Pls-2 give me the solution where is the problem -in sap side or BODS side and I hope you should have some solution
I'm doing wait for your response.
Thanks & Regards,
Rajeev kumar
SAP-BODS Developer

Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

Communication channel monitoring did not record the processing detail

Hi,
I have a proxy-to-file scenario. Usually, I can see the processing details for the receiving file communication channel in Communication channel monitoring with the Message ID and Explanation. And if I click the Message ID, it will give me processing steps in Audit Log. However, I don't see this log for last night's run. In SXMB_MONI, it shows me 2 messages were successfully sent out. The second message should be appended to the first message in receiver file. But the receiver side only got the first message data. Is there any way I can find out why the second message did not reach to the receiver?
Thanks in advanced!
Meiying

Hi
Try opening directly
tools->Internet Options->Advance, uncheck show HTTP friendly error messages under Browsing, then try
http://<host>:<port>/mdt/channelmonitorservlet
You need the authorizations of user group SAP_XI_ADMINISTRATOR with the role modify.
also refer
No "Adapter monitoring" in runtime workbench

Two SAP systems in the same host "no files processing"

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
<b>How can I set up this issue?</b>
Thank you very much
regards
Thank you very much
regards

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
<b>How can I set up this issue?</b>
Thank you very much
regards
Thank you very much
regards

Can anyone explain me the concept of Process Integration(XI) in detail?

Hai all,
Can anyone explain me the concept of Process Integration(XI) in detail?
Regards,
Sanjeev.

Richa,
As already explained above by another user it means that every time SOA looks for files (in this case every 10 sec) SOA should pick all the files that are atleast 2 Minutes Old. (i.e., the "Current Date Time" - "File Creation Date" >= 2 Minutes).
It has nothing to do with the size of the file, as you mentioned in your example.
e.g. File A of 2 MB requires 1.5 mins to write itself on FTP server completely, it is getting picked up in 2 mins only.
File B of 8KB required miliseconds to write itself on FTP server completely, it is getting picked up in 10 seconds.... ISSSUE?
Here the time when File A and File B arrived in the location matters.
Say the same File A and File B are copied into location (say "D:/FilesToBeRead") at 10:20:30 AM, then the poller should pick up both these files at 10:22:30 AM as you had set your minimum file age property to 2mins.
Hope this helps
Thanks,
Deepak.

How can I automate the multi-step process of looking up a caller's contact details when a telephone call comes in with caller ID?

How can I automate the multi-step process of looking up a caller's contact details when a telephone call comes in with caller ID. I want to be able to see more than just the first & last name when a client calls me. I would like the caller ID to pull up the same information that shows up when you search for and find a contact name and then click on the right arrow.
My workaround is to force/enter both the last name and the address in the last name field since then the address will show up.
The only computerized way to look up this additional information is to put the client on hold, memorize the first and last name and correctly enter it in the search field of the contact database and hopefully find it before the client gets tired of waiting.
Note that I go to about 48 small jobs per week. So far I have about 9,000 contacts. It's easy to make a mistake and have the client wondering what I'm doing and what's taking so long.
The second workaround is to use paper and pencil and ask the client for name, address, cross street and phone number again, repeating what I did some time previously.
Please help meautomate this process.

You don't have to put anyone on hold. When the call comes in, tap the Home button, then tap contacts, go to the contact. Tap Home button when finished, tap the top banner to return to the call screen.

Get the the host process details on OEM 12c

Similar Messages

Maybe you are looking for