Get the time stamp when the user is enabled in the report.

Hi,
I need to create a report to show the list of user who has been enabled for a given period with time stamp.
please suggest a way to achive that..
thanks....

Hi,
All reports give results in time stamp,
Wednesday, November 9, 2011 2:20:01 PM CST CONFIGURATOR Enable Identity System Account 1001 WAVESET 1001 Success N/A
what excatly are you looking for?

Similar Messages

Lync 2013 commands shell to get the report which user is connecting to which pool in coexistence with Legacy version

HI,
We have LYNC 2013 in coexistence with OCS 2007 R2 and setup is like that user can connect to any pool either sip is exist on OCS 2007 or on LYNC 2013
Do we have any command shell to get the details about which user is connecting to which pool?
lync 2013 commands to get the report which user is connecting to legacy pool in coexistence with ocs 2007
Thanks
jitender

HI Holger,
Thanks for reply!!
But the above link will not work as per scenrio.
The SIP addresses has been migrated to LYNC server. ther is no user host on OCS server. However in communicator client the manual entry is done and OCS pool name is given. OCS pool just redirect the query to LYNC pool.
And we need to idenfy the SIP user request on OCS which are redirecting by ocs pool to lync pool
In other word we can say this question like: How to collect the number of SIP users connections coming on OCS Direct server?
Thanks
jitender
As all users are migrated to Lync Server, all users will be redirected to their home pool.
You want to collect the number of SIP connections coming from OCS server that means you want to count the number of Lync client with manual configuration pointing to OCS server.
This information is stored in SIP session. There is no Lync command to get this kind of information natively.
Lisa Zheng
TechNet Community Support

Retaining date/time stamp when copying files from a backup network drive

How do I retain the date/time stamp when copying files from a backup such as a external drive or a network drive?

i don't trust MA at all. known to create a lot of problems.
instead, see the green box in this user tip.

Error in getting the report from web

HI,
HERE I AM TRYING TO CREATE A REPORT FROM FORMS WHICH I WANT TO WEBENABLED.
I COULD GO TILL I CAN SEE MY FORM WHERE I GIVE AS THE PARAMETERS AS 'HS' OR 'SC' OR 'YS' THROUGH THE LIST OF VALUES OR THE USER CAN JUST ENTER IF THEY KNOW THE VALUE WHICH THEY ARE LOOKING FOR.
HERE WHEN I CLICK ON THE BUTTON TO GET THE REPORT ITS GIVING AN ERROR CALLED FRM-41219 CANNOT FIND THE REPORT: INVALID ID.
I DONT UNDERSTAND WHERE I AM DOING WRONG THE REPORT IS ON THE SERVER ALSO.
HERE IS THE CODE IN WHEN-BUTTON-PRESSED TRIGGER TO GET THE REPORT.
declare
v_rep varchar2(100);
repid report_object;
v_param varchar2(1024);
begin
repid:=find_report_object('WAT');
v_param:='paramform=no P_STATUS='||:NBT.STATUS||'';
set_report_object_property(repid,report_other,v_param);
set_report_object_property(repid,report_destype,file);
set_report_object_property(repid,report_desname,'E:\ORANT\WEBTEMP\TEST'||:NBT.STATUS ||'.pdf');
v_rep:=run_report_object(repid);
web.show_document('http://PS/WEBTEMP/TEST'||:NBT.STATUS||'.pdf','_blank');
end;
HERE 'WAT' IS THE REPORT NAME AND P_STATUS IS THE PARAMETER I AM PASSING FROM THE REPORT,
:NBT.STATUS IS THE PARAMETER WHERE I GIVE IN THE FORM SUCH AS 'CS' OR 'YS' ETC..
I CAN SEE THE FORM BUT AFTER I GIVE THE PARAMETER AND CLICK ON THE BUTTON TO GET THE REPORT I AM GETTING THE ERROR.
PLEASE DO HELP ME OUT.
THANKS A LOT IN ADVANCE....

Hello,
In
repid:=find_report_object('WAT');
WAT should be the report object seen in the forms object navigator and not actully the report rdf name.
This message FRM-41219 essentially means that the report cannot be found. Specifying the correct name of a report object found in the forms object navigator (not the
actual name of the rdf file) usually resolves the problem.
Please ensure to be on the latest patch of your version ( can get from oracle metalink site) of developer to consume any fixes in this area
Thanks
The Oracle Reports Team

How can I get a time stamp on text message without turning on "read"???

How can I get a time stamp on text message iPhone 5 IOS 7? (Without having to send read receipt)

You can make the "Visit Date" column visible in the Bookmarks Manager (Library) via "Views > Show Columns"
* Bookmarks > Organize Bookmarks
*http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox

How do I get a time stamp with EACH text message?

How do I get a time stamp with EACH text message?

Wow finally! It's nice to see Apple finally provided something as simple as a time stamp.
Now if they would only put in an Auto Retry for text messaging I would be all set
Does anyone use the current Android OS? Does it have an auto retry function?

Are all my photos dated and time stamped when they are taken

Are all my photos date and time stamped when taken?

Abadfatboy wrote:
Are all my photos date and time stamped when taken?
While that data is not visible in the Photo app, yes, it is there.

I too get the report of Failiure configuring Windows updates....

I too get the report of Failiure configuring Windows updates, however, when it restarts and I go into safe mode with networking, it indicates the same message and restarts on it own......PLEASE HELP! I don't have the luxury of being able to access my Windows,
it won't even go to password!

Hi,
Please press and hold the F8 key* early in the system boot process. Then select the
Repair your computer option from the boot menu that appears.
If Windows RE is not installed or is unable to boot from the internal drive, access it as follows:
Insert your installation media -> Press a key when the Press any key to boot from CD or DVD message appears
-> You will be prompted to select a Language to install, Time and currency format, and Keyboard or input method. Configure each of these settings and then click Next. -> Click the Repair your computer option
Then, choose System Restore to fix this issue.
Kate Li
TechNet Community Support

PAYABLES NOT GETTING THE REPORT OUTPUT IN PDF AFTER APPLYING RUP5 R12

Hi All,
RDBMS:10.2.0.3.0
Oracle Apps :12.0.4
OS:AIX 5.3
Problem Description:
We are presently facing an issue in Payables not getting the report output in PDF esp for the reports "Invoice Register", Invoice Hold Report and also other reports. We were able to generate the reports till our last test performed on last Thursday. This instance was cloned over the last weekend and probably the new upgrade to RUP5 R12,would have impacted it.
Concurrent Programs submitted are completed normal but on clicking "view output" results in Blank PDF output.
The error message what was shown is as below:
"Adobe Reader could not open 'AcrC.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)".
Where could we locate ther above 'AcrC.tmp' of Adobe Reader..
could anyone please share such an experience encountered for resolution..
Would appreciate an early response..
Thanks for your time!
Regards,

I suggest you speak to your DBA/sysadmin. This is not likely to be a reports problem.
Check that you can see the output from apps through the viewer (the report may not hav output anything)
Check whether you can print anything on that printer from apps.
May also be worth checking to see if you can print to another printer from this report.

Get the report server details of a tfs instance

HI
I have tried the following method to get the report server attached to the tfs instance. but this returns no details. Please help on this.
UritfsUri =
newUri(uri);
TfsConfigurationServerconfigurationServer
=
TfsConfigurationServerFactory.GetConfigurationServer(tfsUri);
ReadOnlyCollection<CatalogNode>
collectionNodes =
                configurationServer.CatalogNode.QueryChildren(new[]
{ CatalogResourceTypes.ReportingServer,
CatalogResourceTypes.ReportingConfiguration,
CatalogResourceTypes.SqlReportingInstance}
, true,
CatalogQueryOptions.IncludeParents);
Thanks
Poornima

Hi Pommrnima,
Thanks for your post.
I tested this scenario in my TFS Server and received the same result. But the
CatalogResourceTypes.ProjectCollection and
CatalogResourceTypes.TeamProject can working fine to show the collection and team project details. It seems that
ReadOnlyCollection<CatalogNode> tpcNodes = configurationServerNode.QueryChildren()
cannot return the server level configuration information.
For this scenario, please submit it to Microsoft Connect Feedback portal at:
https://connect.microsoft.com/VisualStudio. Microsoft engineers will evaluate them seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I get the report status?

I am using web service to connect to BI Publisher and run the report by java code. And I have questions still unclear, anyone who knows about it please help me.
1. Is there any method to get the report status, such as whether the report runs successfully or not.
2. If I have a huge table that binds with the template (maybe RTF template), how about the performance of the BI publisher?
3. I use the sample codes in the web service tutorial to run the report, but the out pdf report doesn't change when i add or remove the table data, how can I resolve it?
Thanks very much.

Use the web services and use this function
getScheduledReportStatus
you will get the status of the report ran.
Possible values are: "Completed", "Error" "Running", "Scheduled","Suspended", "Unknown"
It is in the table XMLP_SCHED_OUTPUT status column :)

How to get the report summary to the bottom of the page?

Hi all. Does anyone know how can I get the report summary to
stick to the bottom of the page, like the page footer? Basically, I
have a report that displays line items on an order. At the end of
the report, there is a signatory section or acknowledgment. If I
stick this in the page footer, then it displays at the bottom of
the page, but on every page. If I put it on the report footer, than
it follows immediately after the details, and not at the bottom of
the page. What I need is the report footer to be at the bottom of
the last page.
Any ideas?

Greetings. Thanks for the post. I am not having problems with
a page number. I am having problems with getting the report footer
contents to be at the bottom of the last page. The closest solution
I have found is to put the content in the page footer, and then
hide the page footer until the last page. However, this leaves
whitespace on all of the other pages, which isn't ideal. I really
need an attribute that allows me to set the report footer to print
at the bottom of the page, like the page footer.

How to get the Reports of Change Tracking Table in MDM?

Hi!
Please tell me how to get the reports of Change Tracking Table in MDM which is a System table, directly from MDM without using any interface.
Thanks in advance for the reply.
With Best Regards
Devendra Pandey

Hi Devendra,
MDM can track changes on tables and fields. <u>The level of change tracking, and which tables/fields to track, are configurable in the MDM Console</u>. MDM opens a new database on the same database engine as the MDM repository and writes all change records to this database.
For information of various steps you can visit
<a href="http://help.sap.com/saphelp_mdm550/helpdata/en/45/c7b20339ee570ae10000000a114a6b/content.htm">this URL</a>
Regards,
Krutarth

How to get the reporting icon in cube.

hi,
i have a successful request(with all the required data) in the cube (manage screen) but i could n't get the reporting icon next to request id in the cube manage screen how to get ithe reporting icon.

This might be because of issue -- data is not ready to view in the Query level. So that it happened.
Go to the 'Manage' in the InfoCube level and verify the last updated request are ready to report.
The possible causes may be
1. If the previous request may be an error in Cube level, the other requests will not be ready to report.
2. If there is Aggregate is maintaining in the Cube level, you should perform rollup to fill aggregates and made the requests available to report.
Edited by: prashanthk on Aug 31, 2010 10:48 AM

How to get the report server name in Forms 10g.

How to get the report server name in Forms 10g.
I'm using the Application Server 10g 10.1.2.

Hello,
I do not think that you can get this value from anywhere. A solution is to put the Reports server name in an environment variable stored in the /forms/server/default.env file, then to query it at Forms runtime with the TOOL_ENV.Getvar() built-in.
Francois

Get the report name in reports 6i??

Hi!!
I need to get the report name from reports 6i, in forms i can get the form name whit :SYSTEM.CURRENT_FORM, but in reports this is not possible.
How Can I get the name of the report??
Thanks!
Regards!!
Edited by: JuaNiNNaio on 30-jun-2009 9:55

Try srw.get_report_name!

Get the time stamp when the user is enabled in the report.

Similar Messages

Maybe you are looking for