Get the x- and y-coord of a pointobject (heijden@speerit.nl)
Can anybody tell me how I simply can get the x- and y-coord of a pointobject using sql
I need to update the X and Y field in a spatial table based upon the spatial object in the same table.
It must be a simple SQL, but I can't find it. My email : [email protected]
SELECT t.<geometry_col>.SDO_POINT.x,t.<geometry_col>.SDO_POINT.y
FROM <table> T
Note that you must use the table alias.
Similar Messages
-
I am trying to download a book on my ipad. It says I need to install itunes. I have itunes already. I frequently get a message to re-install itunes. I do, but I still get the message, and I still can't get the book on my ipad.
you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads
-
I found an old iPod classic of mine that is synced to a computer that is long gone. I want to get the music and photos from this old iPod onto my new computer. Every time I hook the iPod up to my new computer it wants to delete what is on the iPod and replace with the contents of the iTunes that is currently on the new computer. I don't want to do that. I want to keep what is on the old iPod and transfer it to iTunes. Any help? Thanks!
See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock -
Trying to get the Opening and Closing Balance, 0TOTALSTCK and 0VALSTCKVAL
Hi Experts, Good Day.
I am developing a query for Stock Balances, Using Custom cube created with copy from 0ic_c03.
I am trying to get the Opening and Closing Balance, based on Non-Cumulative KF - 0TOTALSTCK and 0VALSTCKVAL.
Both The KF's Behaviour for Exception Aggregat. = Last Value
I am using VARIABLE OFFSET as -1 to get Opening Balance, and just restriction for Closing Balance based on 0CALMONTH
Unfortunately i am getting data for the periods which does not have data in my Cube. It is taking the total value as closing balance for the periods which we don't have transaction in the cube.
For Ex. I have data for 09.2010 & 10.2010 a particular material, when i enter 08.2010 as input i am getting the total value of the material.
I hope you understand the problem and solution soon.
I will give you more explanation if needed.
Thanks in Advance....
Have a great Day Ahead.....
GopalNHi GopaIN,
can you explain us process you have done about initialization of data (2LIS_03_BX, cube compression)? it seams like there was data before 09.2010 and you load it with 2LIS_03_BX data source. That data is not in cube, but just used for update markers.
Edited by: Sasa Todorovic on Mar 25, 2011 9:48 AM -
How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?
How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size? I would like them to open at the size they were previously resized like they used to in previous operating systems. They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it. Any help would be appreciated.
hi Prasanth,
select werks matnr from ZVSCHDRUN into table it_plant.
sort it_plant by matnr werks.
select
vbeln
posnr
matnr
werks
erdat
kbmeng
vrkme
from vbap
into table it_vbap
for all entries in it_plant
where matnr = it_plant-matnr and
werks = it_plant-werks.
and again i have to write one more select query for vbup.
am i right? -
I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?
I just tried the link and it is just fine. If the GateKeeper pops up then open Security & Privacy preferences, click on the General tab, set the last radio button to Anywhere.
-
How can i get the itunes and apps store icon on my ipad desktop?
How can i get the itunes and apps store icon on my ipad desktop?
Google are supposed to be working on an iPad maps app.
-
when i try to set up my icloud account the system says it is sending me an email to verify. I never get the email and it is not in my spam filter. How can i get set up??
Make sure that your Apple ID is your email address and you do not have any other or old IDs associated with you. Go to www.appleid.apple.com and confirm this info. Make sure that the email address you are trying to sign up with is your primary one.
-
I'm new to Mac. I have an iPhone and a Mac Mini. My original iTunes was on a Windows computer that crashed. So, all of my iTunes Music and Movies are gone. How do I get the movies and music from my iPhone to the new Mac Mini?
If you still have the crashed Win computer, you may be able to recover your music and movies from the hard drive. If you have a friend with a hard drive USB connection kit and a PC, they should be able to help. Otherwise, check locally for computer services that might do that for you (I think Best Buy Geek Squad may be able to help). If the drive itself is in good shape, it shouldn't be too expensive.
-
I got an I pad for Christmas and had to return it and they gave me a new one. Is there a way I can get the books and apps I purchased without paying for them again?
Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519
-
i plugged my new iPhone into the computer for the first time and it proceeded to restore. i accidentally clicked on the storage saved on my iTunes for my old phone. so now all the storage from my old phone is on my new phone and I can't find any of the storage from my new phone. is there a way to get the pictures and data back onto my phone that i originally had ?
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs > http://support.apple.com/kb/HT5622
SHARING iTunes MUSIC
http://macmost.com/five-ways-to-share-music-in-itunes.html -
How to get the latest and valid BOM item entry from STPO
hi,
may i know with what condition we can get the latest and valid BOM item entry from STPO table?
i have STLNR and IDNRK as a input. But i realized that it would return multiple entry due to the combination of valid-from and valid till date.
can i use stlnr,idnrk and stpoz (with the latet counter) to get the latest and valid BOM entry?
thank you.Hi
You can get the latest BOM either by using the latest valid from date DATUV or latest internal counter STPOZ
Regards
Shiva -
How can I get the start and end of a date range?
Post Author: RobR
CA Forum: Formula
Greetings!
I have a report whose records are selected if a date field is within the date range returned by the LastFullWeek function. I want the header for that report to print the first and last dates in that range. I don't see a way to extract those dates from a date range. How do I do it?
Also, I think it would be nice to be able to walk through a date range using a for loop, something along the lines of the following:
for (thisDate in LastFullWeed)( do something;)
but I didn't see syntax like that in the help system. If I could do this, then I could get the first and last date. Is this possible?
Thank you!
RobRPost Author: SKodidine
CA Forum: Formula
If all you want is the starting date and ending date of the function LastFullWeek, then all you have to do is this:
minimum(LastFullWeek) & ' ' & maximum(LastFullWeek);
On a side note, from your post: for (thisDate in LastFullWeed) Whatcha smokin' Willis?? -
How can I get the peak and valley of a MZI signal
I am using MZI signal which is similar to sine wave with frequency of 10MHz to calibrate an interference signal. I want to get the peak and valley of the MZI signal and get the corresponding value of interference signal at the same location. The problem is that the MZI signal aquired by DAQ is not smooth, Please see attached filter.PNG, the top left is the MZI, top right is the MZI Zoomed in, you can see that there may be two values that are approximately same to each other. I used a peak detector to detect both the peak and valley and a build array to concatenate them. I am worried that the peak detector may find two peaks or two valleys in a fringe. So I used the filter function in express to bandpass the MZI signal (cutoff frequency is 8MHZ~12MHZ) to smooth the signal, the result zoomed in is the bottom graph in filter.PNG. But I found that it did not solve the problem but cause phase shift. Is there somebody can give some help?
Attachments:
filter.PNG 143 KB
peak detector.PNG 69 KBI don't know anything about MZI signals, but I do know sine waves. If this is a sine wave, it is relatively easy to measure its amplitude as long as you know the frequency. Since you say it is 10 MHz, you appear to know the frequency. You can use Fourier analysis to determine the magnitude and phase of your signal, as long is it is a steady signal that doesn't change frequency or amplitude.
Generate a sine and cosine wave using the same frequency. Divide each wave by the sum of its points. Multiply each one by your incoming signal and sum all the values, one sum for sine and one sum for cosine. The sums should be the coefficients of the sine and cosine components of your unknown signal. The ratio tells you the phase of the signal. If you multiply the sine and cosine waves by their coefficients and add them together, you should be very close to your incoming signal. The amplitude of your signal is equal to square root of A*A+B*B, where A and B are your coefficients.
I may be off by a constant factor here somewhere (probably pi), since I didn't write down the equations and verify them. These equations are the basis of the Fourier series, though, so they would be fairly easy to find.
Another option would be resampling. If you upsampled the data and increased the data resolution by a factor of 10 or so and filtered the results using an FIR filter, you would have a much cleaner signal with a lot more detail. You wouldn't have any problem locating and measuring peaks and valleys. This would probably work better with your data, since it looks like it doesn't have a constant magnitude. To upsample the data, just add 9 zeroes between each data point. Create a lowpass FIR filter that is based on 10 times the original sampling frequency and has an amplitude of 10. The cutoff frequency should be half the original sampling rate. Filter your new data and you should get the same waveform with 10 times the resolution.
Bruce
Message Edited by Bruce Ammons on 10-02-2008 09:10 PM
Bruce Ammons
Ammons Engineering -
My wife purchased an iTunes gift card for me and I scratched off the back to get the code and when I entered it to redeem it told me that it had already been redeemed what do I do?
Try Here > http://support.apple.com/kb/TS1292
If no joy...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
And there is this...
http://www.apple.com/hk/en/support/itunes/store/giftcard/
Maybe you are looking for
-
Open AR transaction and Receipts
Can you let me know the standard concurrent programs which list all the Receivables Open AR Transaction and Open AR Receipts
-
After installing software update and restart, mail no longer opens.
After I installed a software update on 9-20-12, I got a message that "this version of Mail doesn't work with Mac OS X...open Mail from the applications folder." I tried this, but nothing happens when I click on the different looking mail icon. I dr
-
Problem in WebI reports in a single dashboard
Hi All, How many WebI reports we can display in a single dashboard, and what should we do to increase them without error. Now, Our dashboard consist of 7 WebI reports, each of them have a link (OpenDoc) to open WebI in new window. After a link
-
Trying to EXPORT-CSV without headers - Tried suggestions in forum - still stuck
I am tryling to get the contents of my array out to a CSV with no neader records. I looked for examples here and on other sites but I still cannot get it working. Below is the latest attempt and the 1st row of te output. I end up with a CSV with
-
I cannot sync iMessage between devices although I have both devices settings correct
I have the settings correct on both iPhone and iPad but messages still will not sync. They had been working and then it stops. Anyone else having this problem? A possible solution?!