Get URL in AS3

At the end of my movie I want to launch a URL that loads up
another Flash movie. In the past I would use something like
getURL("
http://www.whatever.com");
Any ideas on how to perform this task in Actionscript 3?

even if you're a little slow, it shouldn't take 8 1/2 months
to look up navigateToURL().

Similar Messages

  • Hi! I need to load a GET url that si very long. On other browsers, I can load the url. In firefox 3.6, no. There is an addons or a plugin so I can extend this limit? If yes, is possible to load automatically this addons when loading a certain page? thanks

    Hi!
    I need to load a GET url that si very long. On other browsers, I can load the url. In firefox 3.6, no.
    There is an addons or a plugin so I can extend this limit? If yes, is possible to load automatically this addons when loading a certain page? thanks
    The url is sometingh like this (this is correctly loaded, but it could be longer)

    Firefox should have problems with long GET data appended to an URL (long would be over 64k).<br />
    If there are problems then it is possible that an extension is the cause of that.
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Get URL by PCD in WD ABAP

    Hello friends,
    I'm developing a web dynpro abap applcation. My problem is when i'm pressing on button that need to open
    bw iview.I am using the method CREATE_EXTERNAL_WINDOW from the interface IF_WD_WINDOW_MANAGER, now I need to send url as paramter.Is there any way to get url by pcd ( to get the url of bw iview )?
    I'm doing it that way and not by calling NAVIGATE_ABSOLUTE method because when bw iview send me back paramters( with EPCM ) i want also to close it.
    Thanks in advanced,
    Udi

    Hi Udi,
    We had a similar requirement where we need to call a Transaction in portal with different values for its parameters.
    Assuming that your BW iView will have NON-CHANGING Url path you can store that path in a abap table ( for multiple reports also) and then get the value when required.
    If you need to pass any parameters with the URL you can concatenate it to the NON-CHANGING url part and send.
    I hope it helps.
    Revert back in case of queries/issues.
    Regards,
    Sumit Oberoi

  • Get Url from a text box

    Hello,
    I have read a couple posts in regards to the GEt URL function
    but couldn't find what I'm looking for.
    Trusting someone can help.
    Here are two reference files
    1- Main swf that loads the movie clip
    with the links
    Swf
    that displays the links I'm opening in a new window
    I'm able to open the url on a new window but couldn't find a
    way to control the height of this window. Please note that the
    links are all inside a text box. They are not separate buttons they
    are just text hiperlinks.
    Please let me know if any of you knows how to control the new
    _blank window height.
    Thanks
    Fe

    Hi. You should consider posting this to either the iPhone forum or the Developer forum. This forum is for discussing the Unix subsystem of OS X...

  • Help with calling a Get URL

    I am having a problem with calling a series of web pages
    within my movie. I have an index.fla that I publish to html. Within
    the index.html, I am calling multiple swf files to load content.
    Home.swf loads when the index page displays. Then the user clicks
    on any button and each button loads another swf replacing the main
    content with perhaps loading it's own swf files of content also.
    Everything is working fine. However, on one called swf file, called
    students.swf, I also have a menu swf file that is called when
    students loads. This menu swf file has text listed with
    actionscripting calling a data file that causes the text to expand
    and rollout and display a label of the url. When the user clicks on
    the list name I have a get url to the url of the label. Everything
    works fine in the swf files when I test the movies for the swf for
    the menu file and for the student file swf. However, when I publish
    and run the index page and start testing out the student swf that
    is called, the menu will not open up a new browser window with the
    link designated in the get url. I can't figure it out! It works
    fine in the swf files, but not when I test it out through the index
    controlling file. Please Help!!!

    if you're using as2, try adding
    this._lockroot=true;
    to the movieclip that contains getURL, the student file
    swf.

  • Get Url doesnt work in my flash .swf page

    Get url doesnt work in my flash .swf page
    www.wackyworld.biz/north.swf
    click on the building is supposed to go to a site. I made all the buildings symbols and when i hit f9 the actions window opens i put
    on bowling building
    on (Release)
    get URL (http://wackyworld.biz/bowling/bowling.html", "_self ") ;
    why when i click on the buildings they dont work? can someone download the file and convert it to fla and tell me what im doing wrong?
    Brent
    Message was edited by: crashncrazy

    i did click on the button and then put in the code.
    on (release)
         "getURL" (http://www.wackyworld.biz/bowling/bowling.html, "_self");
    like this?
    if so this is what i have. still no way to click on button on site

  • How to publish project to get url?

    how to publish project to get url?

    Hi
    If you publish your Captivate project to Adobe Connect, then you will get a URL which you can provide to your users. Users need to open the URL to play the project.
    If you publish your Captivate project which is SCORM compliant, then you need to upload this project to any LMS,  you will get a URL which you need to provide to your users, users will open on the URL and project will start playing.
    Thanks and Regards
    VJ

  • Get URL variable in customer exit

    Hi,
    does anybody know how to process a variable value in a customer exit which was filled by an URL parameter? I have created an iView which calls a webtemplate via URL  "http://<SERVER>/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=ZTEST&var_name_1=MyVAR&var_operator_1=EQ&var_sign_2=I&var_value_low_ext_1=12345".
    When I execute the iView the value "12345" is correctly transported and stored in variable "MyVAR" and the result is also filtered on this value.
    Now I would like to modify the value in a customer exit but it seams as the entry is not not stored in table i_t_var_range. Any ideas how I might get access on the URL parameter value?
    Thanks, Carina

    Hi,
    I have exactly the same problem. Have you solve this problem ?
    It must exist a solution because SAP kowns how to get URL filters in standard, but I don't kown how!
    Thanks in advance for any help.
    Philippe

  • Get Url

    Hi,
    I have created following embedded code
    <object width='576' height='353' ID="Object1"
    VIEWASTEXT>
    <param name='movie' value='
    http://invind05/Rohit2/find_url.swf'
    />
    <param name='wmode' value='transparent'/>
    <embed src='
    http://invind05/Rohit2/find_url.swf'
    width='576' height='353' type='application/x-shockwave-flash'
    wmode='transparent'/>
    </object>
    This code will be used by client on any
    http:// xyz/abc.html.
    Iwant to get the url where the above .swf file is used. I
    donot want to add Java Script function in the embedded code.

    Kevin wrote:
    > How can i get a browser to load a new page url once a
    flash movie ends.So
    > the viewer doesnt have to click a link to open the new
    browser window? Ive
    > tried the get url action but no success so far.
    Place a key frame on the last frame of the timeline with
    getURL action.
    getURL("somepage.html");
    Once the movie reaches that frame, it will automatically call
    the browser window.
    It's good idea to place stop(); action on that frame as well,
    sometimes the movie
    rewind itself while the browser process the action, making
    impression like there
    is more to come and user get suddenly shifted elsewhere. They
    tend to hit the back
    button to go back see what has happened.
    Best Regards
    Urami
    Beauty is in the eye of the beer holder...
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Get URL + load Movie

    I am going from one Flash site to another and use the get URL
    code just fine getURL("
    http://www.site2.com).
    When I get to site2 how does one pass loadMovie or other
    commands to site2 flash from site 1 with the get URL command? Is
    that a case for shared Objects?
    Thanks

    It looks like you are loading in an external .swf for the
    thumbnails and the larger images for each section. If you want to
    update a particular section's photos, then you can just replace the
    old .swf with a new one with the same name. Your movie will then
    use the new .swf when it is called to be loaded.
    You should not use getURL() for any of this. GetURL() is used
    to load a new .html document into a browser.

  • ACE 4710 http probe get url question

    I am trying to create a http probe using the request method get url command. My url contains a question mark and the ACE will not accept the url as is and it strips out the question mark character. Is there a way to make the ace accept a url containg a question mark?
    probe http HTTP_PROBE
      port 9040
      interval 10
      faildetect 5
      passdetect interval 60
      expect status 200 200
      open 1
    The url I am trying to enter is /psp/epprod/?cmd=login
    When I enter it the ACE does as shown below
    (config-probe-http)# request method get url /psp/epprod/?
    <LINE>
    ACE-APP-02/vc_peoplesoft(config-probe-http)# request method get url /psp/epprod/cmd=login
    It strips out the ? character.

    Hi Nicholas,
    To enter a question mark you need to type ctrl+v prior to entering the ?
    You enter the control key then lowercase v, then your question mark.
    HTH
    Pablo

  • Changing an old Get URL

    Hello,
    I feel like I am losing my mind, and this may be a very easy
    fix that I am overlooking, but I am trying to just change the Get
    URL address of something that I did a long time ago. When I open
    the file, I found 2 instances where I put in the new URL in place
    of the old one, but when I test the movie, it still sends to the
    old address. I have cleared my cache in the browser, etc.
    Does anyone have an idea of what I might be overlooking in
    trying to change the URL? I created a fade up movie for an icon and
    I changed the address on the timeline and on the movie itself,
    which were the only 2 places I could find the URL to replace.
    You can see the website at
    http://www.dirtcad.com
    It is the fade up Blue Cross icon on the bottom right after
    the movie loads that needs to be changed. I created this movie in
    Flash MX and I opened it in Flash 8 and I am just trying to make
    that one change.
    Thanks for any suggestions.

    kregg wrote:
    > Hello,
    >
    > I feel like I am losing my mind, and this may be a very
    easy fix that I am
    > overlooking, but I am trying to just change the Get URL
    address of something
    > that I did a long time ago. When I open the file, I
    found 2 instances where I
    > put in the new URL in place of the old one, but when I
    test the movie, it still
    > sends to the old address. I have cleared my cache in the
    browser, etc.
    there really is no magic when comes to getURL action, you
    simply editing wrong instance
    and old action remain attached. You just remove the action in
    a wrong place so it
    takes no effect.
    Upload the file and let us check, much easier than trying to
    guess from here
    Regards
    Urami
    Happy New Year guys - all the best there is in the 2006 :)
    <urami>
    http://www.Flashfugitive.com
    </urami>
    <web junk free>
    http://www.firefox.com
    </web junk free>

  • Can not get URL using GetPageContext().getRequest().getRequestURI()

    Hi guys,
    I am coding a web application using ColdFusion 8.
    The situation is as follow:
    - I type https://mypage.com/aaa/bbb.html on web browser where aaa and bbb.html does not exist in my web folder.
    - And this will drive the error 404 PageNotFound occurred, in the code that processing error 404, I tried to get URL aaa/bbb.html by using GetPageContext().getRequest().getRequestURI() but the result of this command is my created 404 error page.
    - I also tried to get URL by using CGI, but also couldn't get it.
    Can you guys show me the way to get URL when no page is found error occurred?
    Thank you very much in advanced!

    No screen wrote:
    - I type https://mypage.com/aaa/bbb.html on web browser where aaa and bbb.html does not exist in my web folder.
    - And this will drive the error 404 PageNotFound occurred, in the code that processing error 404, I tried to get URL aaa/bbb.html by using GetPageContext().getRequest().getRequestURI() but the result of this command is my created 404 error page.
    ColdFusion will know nothing of https://mypage.com/aaa/bbb.html! As the requested page is HTML, the web server will respond to it, without involving ColdFusion. The ColdFusion function GetPageContext() is therefore irrelevant.

  • ACE Health probe using get URL

    Hello,
    We are trying to create a health probe for our google search appliances and as part of the URL get there is a question mark but the ACE doesn't like that.  Is there a way around this or should it be done differently?
    request method get url /searchq? (This is what we want the URL to be)
    request method get url /searchq (This is where it thinks i'm asking it for help)
    Thanks in Advance.

    Hello,
    You need to typ CRTL+v prior to entering the ?
    That's the Control key then lowercase v, then your question mark.
    Hope this helps,
    Sean

  • Get URL of portal

    Hello!
    I have, seems like, simple question:
    How to get url of portal ( http://mydomain:port /irj/portal/....), which see user?
    (For example, portal server access by ip 10.18.0.1, but user in file 'hosts' have alias mydomain for this ip, accordingly have http://mydomain:port /irj/portal/... in address bar)

    Hello Paul,
    Actually thing is that we can not access portal with its IP address so we save its Ip address with host name in drivers and then access it with its host name
    For eg if ur portal Ip Address is 10.18.0.1 and u have saved it with its Host name as hello and ur instance number of ur server is 01 then ur port numbre will be
    Port Number = 50000+100*Instance number
    Ie Port number will be 50100
    and host name willll be hello
    so whole URL to access ur portal will be
    http://hello:50100/irj/porttal
    Hope this will help u
    regards.
    Soni Vinit

Maybe you are looking for