GET URL opens a blank screen

I have a flash site that I have some PDF's attached to using the Get URL function opening a blank window.
My client is saying users are clicking on the window and it is timing out. This happend once to me and I got a time out. I think this was from the server and a DNS error.
The links are correct. On my computer it is fine however I have experienced this once or twice.
does anyone know why this might be happening?
thnaks

Try disconnecting and letting the battery drain completely.
I've had this a few times and has resolved it every time.
Though It Really shouldn't happen..

Similar Messages

Help I just get stuck with the blank screen and the white circle

help I just get stuck with the blank screen and the white circle after i erase all content and setting
i dont know how to do pls help.

Try connecting the device to your iTunes library and restoring it. If necessary place the iPod into recovery mode using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock

Pages opens to blank screen

I have the new Pages, 5.5.2 and OS 10.3.3 on a late 2012 iMac. When I open Pages, the screen is blank. All I get is the menu bar. I can go to File > Open Recent, and nothing displays. If I select 'Full Screen', it appears. I can then go to the Window tab on the menu and anything listed, when selected appears. All would now seem to appear as it should be. Then quit Pages. Open Pages, and I am back to square one, nothing visible. If I look under the Windows tab, there are documents listed, one of them even has a check mark. But until I select "Full Screen", the window is blank. I often leave three or four documents open that I am always working with. And previously, when I quit Pages, and later reopened it, those four documents would be there. Now when I do that, those four documents are listed under "Windows", but none and nothing is visible until I select "Full Screen" view. I can then toggle back, exit full screen and it is fine. But it seems that entering full screen view is the only way to get anything to be visible. All of my other apps work normally: Safari, Messages, Mail, Numbers, iTune, Photos, etc.......
BUT NOT PAGES.

How many displays do you have?
Peter

For no apparent reason I can no longer get my email icon to work. All I get is a completely blank screen.

For no apparent reason I can no longer receive or send emails. In fact when I touch the email icon all I get is a blank screen. I have checked my email settings all seems fine. Regards Kim

Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e.not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

ITunes preferences opens with blank screen, HELP!

Alright so I was getting bored of the Windows Media Player interface, so I decided to go back to iTunes.
The installation went fine, but when I wanted to change my options/Preferences, it comes up with this weird blank screen.
http://img40.imageshack.us/img40/3057/waaw.jpg
I've searched on google and only found 1 thread about this with no answers. So I decided to come and ask here.
So I would REALLY appreciate some help because I've always liked iTunes better than WMP.

What version of iTunes do you have installed? Do you have any iTunes plugins?
Troubleshooting issues with 3rd-party iTunes add-ons
If you create a new Windows Vista user, and log in to that user, do you still have the same problem?

Adobe form is opening with blank screen?

Hi,
When i am trying to open adobe form in my portal application, it contains only the blank screen. Could you please let me know, what is the reason for this and how to solve this problem.
I am using adobe livecycle desi
Thanks,
Sathishkumar GS

Hi Tulasi,
Thank you for your reply. I am using adobe livecycle designer 7.1 and reader 8.0
And activex controls are already activated. Even i am gettign the same result.
Thanks,
Sathishkumar GS

Whar do you do if you go to the app storee on your iphone 5c and get nothing but a blank screen?

What does one do if you go to the app store on an iphone 5c and all you get is a blank
screen?

Hi hs from sc,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful if you only see a blank screen when you visit the iTunes Store or App Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
Jeremy

How to get rid of the blank screen?

hi guys,
i'm creating a project, in my college.
i have a problem
i have a lot of flv files which i have loaded the externally.
the problem is, between every movie i get a blank screen, which really disturbing.
how do i get rid of it?
thanks

import poster images of your flvs and make the appropriate image visible when one flv ends and while the next is buffering.

FlashPlayer 9.0 r 115 executable file don't work, opens a blank screen

Hi,
I'm publishing my projector from flash cs3 (embed flashplayer 9.0 r115).I burnt my cd-rom but it doesn't work.
It opens a blank window, in Windows 7 and Vista.
Not always, I mean ... It works in most of computers I try to execute, but I get this problem in a few cases.
I can't get the solution, please anyone can help me?...
It is a fullscreen projector and uses actionscript 2.0.
Thanks a lot

Ok,
This is normally a setting in a modem or router about DOS or SPI protection.
Turn it Off if you have it.
Also Check Internet Sharing is Off.
Your log suggests that you are using a Airport Base Station of some sort (or one end is)
If it is your end you will not fond DOS or SPI there it will be the modem.
5:01 PM Sunday; November 11, 2007

When I open up a 2nd tab from my gmail I get nothing but a blank screen & no search bar

When I open firefox I go into gmail right away or renew my session. When I go to open a 2nd tab to search for something on the interenet I get a blank white screen w/no search bar. I then tried going to the orange firefox dropdown box and click on find. This does no good either.

I would just like to add to this thread. I have tried everything and every way listed here and found my own solution, for those of you who were having the same issue as me.
1. Type "'''about:config'''" in your search bar
2. Click "'''I'll be careful, i promise'''"
3. Type "'''newtab'''" in the search bar
4. Find "'''avg.userPreferences.newtabDisabledByUser'''"
5. Set value to '''true''' by either '''doube clicking''' or '''right click > toggle'''
This immediately deactivated the AVG new tab feature and reset my browser to it's default settings.
Hope this helps!

All of a sudden when I try to download a pdf from the web, all I get is a black blank screen. I trashed the safari plug-ins and still it is blank

when I try to download a pdf file with safari, all I get is a black screen!

Open a Finder window then from the menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Internet Plug-Ins
Click Go.
If you see the: AdobePDFViewer plugin in the Internet Plug-Ins folder, move it to the trash.
Quit and relaunch Safari then try downloading a PDF file.

System gets logged out with blank screen suddenly

I have crossover and installed Google sketchup.
Whenever I try to export as a 2d picture immediately the system becomes blank and login page appears again
Can any one help

The following is My Xorg.0.log.old
[ 7367.413]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 7367.413]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 7367.413] X Protocol Version 11, Revision 0
[ 7367.413] Build Operating System: Linux 2.6.34-ARCH i686
[ 7367.413] Current Operating System: Linux gauranga 2.6.35-ARCH #1 SMP PREEMPT Fri Aug 27 16:22:18 UTC 2010 i686
[ 7367.413] Kernel command line: resume=/dev/sda6 root=/dev/disk/by-uuid/f3a6d5c8-57db-48d7-afff-e6762a184f55 ro init=/sbin/bootchartd acpi_backlight=vendor
[ 7367.413] Build Date: 21 June 2010 11:54:27AM
[ 7367.413]
[ 7367.413] Current version of pixman: 0.18.4
[ 7367.413] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7367.413] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7367.414] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 16 13:20:18 2010
[ 7367.414] (==) Using config file: "/etc/X11/xorg.conf"
[ 7367.414] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7367.414] (==) ServerLayout "X.org Configured"
[ 7367.414] (**) |-->Screen "Screen0" (0)
[ 7367.415] (**) | |-->Monitor "Monitor0"
[ 7367.415] (**) | |-->Device "Card0"
[ 7367.415] (**) |-->Input Device "Mouse0"
[ 7367.415] (**) |-->Input Device "Keyboard0"
[ 7367.415] (==) Automatically adding devices
[ 7367.415] (==) Automatically enabling devices
[ 7367.416] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 7367.416] Entry deleted from font path.
[ 7367.416] (**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 7367.416] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 7367.416] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 7367.416] (WW) Disabling Mouse0
[ 7367.416] (WW) Disabling Keyboard0
[ 7367.416] (II) Loader magic: 0x81e9d00
[ 7367.416] (II) Module ABI versions:
[ 7367.416] X.Org ANSI C Emulation: 0.4
[ 7367.416] X.Org Video Driver: 7.0
[ 7367.416] X.Org XInput driver : 9.0
[ 7367.416] X.Org Server Extension : 3.0
[ 7367.445] (--) PCI:*(0:0:2:0) 8086:2a42:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000060f0/8
[ 7367.445] (--) PCI: (0:0:2:1) 8086:2a43:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd3400000/1048576
[ 7367.445] (II) Open ACPI successful (/var/run/acpid.socket)
[ 7367.445] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 7367.445] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 7367.445] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 7367.445] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 7367.445] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 7367.445] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 7367.445] (II) LoadModule: "dri"
[ 7367.446] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 7367.446] (II) Module dri: vendor="X.Org Foundation"
[ 7367.447] compiled for 1.8.1.902, module version = 1.0.0
[ 7367.447] ABI class: X.Org Server Extension, version 3.0
[ 7367.447] (II) Loading extension XFree86-DRI
[ 7367.447] (II) LoadModule: "dri2"
[ 7367.447] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 7367.447] (II) Module dri2: vendor="X.Org Foundation"
[ 7367.447] compiled for 1.8.1.902, module version = 1.2.0
[ 7367.447] ABI class: X.Org Server Extension, version 3.0
[ 7367.447] (II) Loading extension DRI2
[ 7367.447] (II) LoadModule: "glx"
[ 7367.448] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7367.448] (II) Module glx: vendor="X.Org Foundation"
[ 7367.448] compiled for 1.8.1.902, module version = 1.0.0
[ 7367.448] ABI class: X.Org Server Extension, version 3.0
[ 7367.448] (==) AIGLX enabled
[ 7367.448] (II) Loading extension GLX
[ 7367.448] (II) LoadModule: "extmod"
[ 7367.449] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 7367.449] (II) Module extmod: vendor="X.Org Foundation"
[ 7367.449] compiled for 1.8.1.902, module version = 1.0.0
[ 7367.449] Module class: X.Org Server Extension
[ 7367.449] ABI class: X.Org Server Extension, version 3.0
[ 7367.449] (II) Loading extension MIT-SCREEN-SAVER
[ 7367.449] (II) Loading extension XFree86-VidModeExtension
[ 7367.449] (II) Loading extension XFree86-DGA
[ 7367.449] (II) Loading extension DPMS
[ 7367.449] (II) Loading extension XVideo
[ 7367.449] (II) Loading extension XVideo-MotionCompensation
[ 7367.449] (II) Loading extension X-Resource
[ 7367.449] (II) LoadModule: "dbe"
[ 7367.450] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 7367.450] (II) Module dbe: vendor="X.Org Foundation"
[ 7367.450] compiled for 1.8.1.902, module version = 1.0.0
[ 7367.450] Module class: X.Org Server Extension
[ 7367.450] ABI class: X.Org Server Extension, version 3.0
[ 7367.450] (II) Loading extension DOUBLE-BUFFER
[ 7367.450] (II) LoadModule: "record"
[ 7367.451] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 7367.451] (II) Module record: vendor="X.Org Foundation"
[ 7367.451] compiled for 1.8.1.902, module version = 1.13.0
[ 7367.451] Module class: X.Org Server Extension
[ 7367.451] ABI class: X.Org Server Extension, version 3.0
[ 7367.451] (II) Loading extension RECORD
[ 7367.451] (II) LoadModule: "intel"
[ 7367.451] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 7367.452] (II) Module intel: vendor="X.Org Foundation"
[ 7367.452] compiled for 1.8.1.902, module version = 2.12.0
[ 7367.452] Module class: X.Org Video Driver
[ 7367.452] ABI class: X.Org Video Driver, version 7.0
[ 7367.452] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 7367.452] (++) using VT number 8
[ 7367.453] (II) Primary Device is: PCI 00@00:02:0
[ 7367.455] drmOpenDevice: node name is /dev/dri/card0
[ 7367.456] drmOpenDevice: open result is 9, (OK)
[ 7367.477] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 7367.477] drmOpenDevice: node name is /dev/dri/card0
[ 7367.477] drmOpenDevice: open result is 9, (OK)
[ 7367.477] drmOpenByBusid: drmOpenMinor returns 9
[ 7367.477] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 7367.477] (II) intel(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 7367.477] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 7367.477] (==) intel(0): RGB weight 888
[ 7367.477] (==) intel(0): Default visual is TrueColor
[ 7367.477] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 7367.477] (--) intel(0): Chipset: "GM45"
[ 7367.478] (==) intel(0): video overlay key set to 0x101fe
[ 7367.502] (II) intel(0): Output VGA1 using monitor section Monitor0
[ 7367.502] (II) intel(0): Output LVDS1 has no monitor section
[ 7367.503] (II) intel(0): found backlight control interface /sys/class/backlight/sony
[ 7367.511] (II) intel(0): Output DP1 has no monitor section
[ 7367.529] (II) intel(0): EDID for output VGA1
[ 7367.529] (II) intel(0): EDID for output LVDS1
[ 7367.530] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 7367.530] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "1024x768i" (interlace mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "512x384i" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
[ 7367.531] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
[ 7367.531] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
[ 7367.531] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[ 7367.531] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[ 7367.531] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[ 7367.531] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 7367.531] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 7367.531] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 7367.531] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 7367.531] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "1600x1200" (hsync out of range)
[ 7367.531] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7367.531] (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
[ 7367.531] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 7367.532] (II) intel(0): Not using default mode "1792x1344" (hsync out of range)
[ 7367.532] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 7367.532] (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
[ 7367.532] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 7367.532] (II) intel(0): Not using default mode "1856x1392" (hsync out of range)
[ 7367.532] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 7367.532] (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
[ 7367.532] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 7367.532] (II) intel(0): Not using default mode "1920x1440" (hsync out of range)
[ 7367.532] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 7367.532] (II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
[ 7367.532] (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[ 7367.532] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 7367.532] (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[ 7367.532] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 7367.532] (II) intel(0): Not using default mode "1920x1440" (hsync out of range)
[ 7367.532] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 7367.532] (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
[ 7367.532] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 7367.532] (II) intel(0): Not using default mode "2048x1536" (hsync out of range)
[ 7367.532] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 7367.532] (II) intel(0): Not using default mode "2048x1536" (hsync out of range)
[ 7367.532] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 7367.532] (II) intel(0): Printing probed modes for output LVDS1
[ 7367.532] (II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1328 1360 1408 800 803 809 816 -hsync -vsync (49.0 kHz)
[ 7367.532] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 7367.532] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 7367.532] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 7367.532] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 7367.532] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 7367.532] (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 7367.532] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 7367.533] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 7367.533] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 7367.533] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 7367.533] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 7367.533] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 7367.533] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 7367.533] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 7367.533] (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
[ 7367.533] (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
[ 7367.533] (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
[ 7367.538] (II) intel(0): EDID for output DP1
[ 7367.538] (II) intel(0): Output VGA1 disconnected
[ 7367.538] (II) intel(0): Output LVDS1 connected
[ 7367.538] (II) intel(0): Output DP1 disconnected
[ 7367.538] (II) intel(0): Using exact sizes for initial modes
[ 7367.538] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 7367.538] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7367.538] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 7367.538] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 7367.538] (==) intel(0): DPI set to (96, 96)
[ 7367.538] (II) Loading sub module "fb"
[ 7367.538] (II) LoadModule: "fb"
[ 7367.539] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7367.539] (II) Module fb: vendor="X.Org Foundation"
[ 7367.539] compiled for 1.8.1.902, module version = 1.0.0
[ 7367.539] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7367.540] (==) Depth 24 pixmap format is 32 bpp
[ 7367.540] (II) intel(0): [DRI2] Setup complete
[ 7367.540] (II) intel(0): [DRI2] DRI driver: i965
[ 7367.540] (**) intel(0): Tiling enabled
[ 7367.540] (**) intel(0): SwapBuffers wait enabled
[ 7367.540] (==) intel(0): VideoRam: 262144 KB
[ 7367.540] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 7367.565] (II) UXA(0): Driver registered support for the following operations:
[ 7367.565] (II) solid
[ 7367.565] (II) copy
[ 7367.565] (II) composite (RENDER acceleration)
[ 7367.565] (II) put_image
[ 7367.565] (II) get_image
[ 7367.565] (==) intel(0): Backing store disabled
[ 7367.565] (==) intel(0): Silken mouse enabled
[ 7367.565] (II) intel(0): Initializing HW Cursor
[ 7367.602] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7367.609] (==) intel(0): DPMS enabled
[ 7367.609] (==) intel(0): Intel XvMC decoder enabled
[ 7367.609] (II) intel(0): Set up textured video
[ 7367.609] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 7367.609] (II) intel(0): direct rendering: DRI2 Enabled
[ 7367.609] (--) RandR disabled
[ 7367.609] (II) Initializing built-in extension Generic Event Extension
[ 7367.609] (II) Initializing built-in extension SHAPE
[ 7367.610] (II) Initializing built-in extension MIT-SHM
[ 7367.610] (II) Initializing built-in extension XInputExtension
[ 7367.610] (II) Initializing built-in extension XTEST
[ 7367.610] (II) Initializing built-in extension BIG-REQUESTS
[ 7367.610] (II) Initializing built-in extension SYNC
[ 7367.610] (II) Initializing built-in extension XKEYBOARD
[ 7367.610] (II) Initializing built-in extension XC-MISC
[ 7367.610] (II) Initializing built-in extension SECURITY
[ 7367.610] (II) Initializing built-in extension XINERAMA
[ 7367.610] (II) Initializing built-in extension XFIXES
[ 7367.610] (II) Initializing built-in extension RENDER
[ 7367.610] (II) Initializing built-in extension RANDR
[ 7367.610] (II) Initializing built-in extension COMPOSITE
[ 7367.610] (II) Initializing built-in extension DAMAGE
[ 7367.638] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7367.638] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7367.638] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7367.638] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 7367.638] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7367.638] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 7367.638] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7367.640] (II) intel(0): Setting screen physical size to 338 x 211
[ 7368.101] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 7368.101] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7368.101] (II) LoadModule: "evdev"
[ 7368.101] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7368.101] (II) Module evdev: vendor="X.Org Foundation"
[ 7368.101] compiled for 1.8.1.902, module version = 2.4.0
[ 7368.101] Module class: X.Org XInput Driver
[ 7368.101] ABI class: X.Org XInput driver, version 9.0
[ 7368.102] (**) Power Button: always reports core events
[ 7368.102] (**) Power Button: Device: "/dev/input/event3"
[ 7368.110] (II) Power Button: Found keys
[ 7368.110] (II) Power Button: Configuring as keyboard
[ 7368.110] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 7368.110] (**) Option "xkb_rules" "evdev"
[ 7368.110] (**) Option "xkb_model" "evdev"
[ 7368.110] (**) Option "xkb_layout" "us"
[ 7368.188] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 7368.189] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7368.189] (**) Video Bus: always reports core events
[ 7368.189] (**) Video Bus: Device: "/dev/input/event4"
[ 7368.200] (II) Video Bus: Found keys
[ 7368.200] (II) Video Bus: Configuring as keyboard
[ 7368.200] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 7368.200] (**) Option "xkb_rules" "evdev"
[ 7368.200] (**) Option "xkb_model" "evdev"
[ 7368.200] (**) Option "xkb_layout" "us"
[ 7368.202] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event6)
[ 7368.203] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 7368.203] (**) Sony Vaio Keys: always reports core events
[ 7368.203] (**) Sony Vaio Keys: Device: "/dev/input/event6"
[ 7368.213] (II) Sony Vaio Keys: Found keys
[ 7368.213] (II) Sony Vaio Keys: Configuring as keyboard
[ 7368.213] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
[ 7368.213] (**) Option "xkb_rules" "evdev"
[ 7368.213] (**) Option "xkb_model" "evdev"
[ 7368.213] (**) Option "xkb_layout" "us"
[ 7368.216] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 7368.216] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7368.216] (**) Power Button: always reports core events
[ 7368.216] (**) Power Button: Device: "/dev/input/event1"
[ 7368.226] (II) Power Button: Found keys
[ 7368.226] (II) Power Button: Configuring as keyboard
[ 7368.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 7368.226] (**) Option "xkb_rules" "evdev"
[ 7368.226] (**) Option "xkb_model" "evdev"
[ 7368.226] (**) Option "xkb_layout" "us"
[ 7368.227] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 7368.227] (II) No input driver/identifier specified (ignoring)
[ 7368.230] (II) config/udev: Adding input device UVC Camera (05ca:183f) (/dev/input/event9)
[ 7368.230] (**) UVC Camera (05ca:183f): Applying InputClass "evdev keyboard catchall"
[ 7368.231] (**) UVC Camera (05ca:183f): always reports core events
[ 7368.231] (**) UVC Camera (05ca:183f): Device: "/dev/input/event9"
[ 7368.240] (II) UVC Camera (05ca:183f): Found keys
[ 7368.240] (II) UVC Camera (05ca:183f): Configuring as keyboard
[ 7368.240] (II) XINPUT: Adding extended input device "UVC Camera (05ca:183f)" (type: KEYBOARD)
[ 7368.240] (**) Option "xkb_rules" "evdev"
[ 7368.240] (**) Option "xkb_model" "evdev"
[ 7368.240] (**) Option "xkb_layout" "us"
[ 7368.241] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 7368.241] (II) No input driver/identifier specified (ignoring)
[ 7368.246] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event12)
[ 7368.246] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 7368.246] (**) Logitech USB Optical Mouse: always reports core events
[ 7368.246] (**) Logitech USB Optical Mouse: Device: "/dev/input/event12"
[ 7368.260] (II) Logitech USB Optical Mouse: Found 12 mouse buttons
[ 7368.260] (II) Logitech USB Optical Mouse: Found scroll wheel(s)
[ 7368.260] (II) Logitech USB Optical Mouse: Found relative axes
[ 7368.260] (II) Logitech USB Optical Mouse: Found x and y relative axes
[ 7368.260] (II) Logitech USB Optical Mouse: Configuring as mouse
[ 7368.260] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 7368.260] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7368.260] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[ 7368.260] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 7368.260] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 7368.260] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 7368.260] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 7368.260] (II) Logitech USB Optical Mouse: initialized for relative axes.
[ 7368.261] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse3)
[ 7368.261] (II) No input driver/identifier specified (ignoring)
[ 7368.269] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 7368.269] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 7368.269] (**) AT Translated Set 2 keyboard: always reports core events
[ 7368.269] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 7368.280] (II) AT Translated Set 2 keyboard: Found keys
[ 7368.280] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 7368.280] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 7368.280] (**) Option "xkb_rules" "evdev"
[ 7368.280] (**) Option "xkb_model" "evdev"
[ 7368.280] (**) Option "xkb_layout" "us"
[ 7368.281] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event8)
[ 7368.281] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 7368.281] (**) PS/2 Generic Mouse: always reports core events
[ 7368.281] (**) PS/2 Generic Mouse: Device: "/dev/input/event8"
[ 7368.293] (II) PS/2 Generic Mouse: Found 3 mouse buttons
[ 7368.293] (II) PS/2 Generic Mouse: Found relative axes
[ 7368.293] (II) PS/2 Generic Mouse: Found x and y relative axes
[ 7368.293] (II) PS/2 Generic Mouse: Configuring as mouse
[ 7368.293] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 7368.293] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7368.293] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
[ 7368.293] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 7368.293] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 7368.293] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 7368.293] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 7368.293] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 7368.294] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 7368.294] (II) No input driver/identifier specified (ignoring)
[ 7368.295] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 7368.295] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 7368.295] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 7368.295] (II) LoadModule: "synaptics"
[ 7368.295] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 7368.295] (II) Module synaptics: vendor="X.Org Foundation"
[ 7368.295] compiled for 1.8.0.902, module version = 1.2.2
[ 7368.295] Module class: X.Org XInput Driver
[ 7368.295] ABI class: X.Org XInput driver, version 9.0
[ 7368.296] (II) Synaptics touchpad driver version 1.2.2
[ 7368.296] (**) Option "Device" "/dev/input/event10"
[ 7368.333] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5728
[ 7368.333] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4548
[ 7368.333] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 7368.333] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 7368.333] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 7368.333] (**) Option "TapButton1" "1"
[ 7368.333] (**) Option "TapButton2" "2"
[ 7368.333] (**) Option "TapButton3" "3"
[ 7368.359] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 7368.360] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 7368.373] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 7368.373] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 7368.373] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 7368.373] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 7368.373] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 7368.399] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 7368.400] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 7368.400] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 7368.400] (II) Synaptics touchpad driver version 1.2.2
[ 7368.999] SynPS/2 Synaptics TouchPad no synaptics event device found
[ 7368.999] (**) Option "Device" "/dev/input/mouse2"
[ 7369.013] (**) Option "TapButton1" "1"
[ 7369.013] (**) Option "TapButton2" "2"
[ 7369.013] (**) Option "TapButton3" "3"
[ 7369.033] Query no Synaptics: 6003C8
[ 7369.033] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 7369.034] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 7369.073] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[ 7369.073] (II) UnloadModule: "synaptics"
[ 7369.073] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 7369.073] (II) No input driver/identifier specified (ignoring)
[ 7369.076] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event7)
[ 7369.076] (II) No input driver/identifier specified (ignoring)
[ 7369.076] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[ 7369.076] (II) No input driver/identifier specified (ignoring)
[ 7587.473]
Backtrace:
[ 7587.473] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80df05b]
[ 7587.473] 1: /usr/bin/X (0x8048000+0x63da5) [0x80abda5]
[ 7587.473] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb779b40c]
[ 7587.473] 3: /usr/lib/xorg/modules/dri/i965_dri.so (0xb6e67000+0x1384b) [0xb6e7a84b]
[ 7587.473] 4: /usr/lib/xorg/modules/dri/i965_dri.so (0xb6e67000+0x13e85) [0xb6e7ae85]
[ 7587.473] 5: /usr/lib/xorg/modules/dri/i965_dri.so (0xb6e67000+0x149e7) [0xb6e7b9e7]
[ 7587.473] 6: /usr/lib/xorg/modules/dri/i965_dri.so (0xb6e67000+0xa1d6) [0xb6e711d6]
[ 7587.473] 7: /usr/lib/xorg/modules/extensions/libglx.so (0xb735c000+0x423dc) [0xb739e3dc]
[ 7587.473] 8: /usr/lib/xorg/modules/extensions/libglx.so (0xb735c000+0x32fa2) [0xb738efa2]
[ 7587.473] 9: /usr/lib/xorg/modules/extensions/libglx.so (0xb735c000+0x337a5) [0xb738f7a5]
[ 7587.473] 10: /usr/lib/xorg/modules/extensions/libglx.so (0xb735c000+0x3766f) [0xb739366f]
[ 7587.473] 11: /usr/bin/X (0x8048000+0x2170f) [0x806970f]
[ 7587.473] 12: /usr/bin/X (0x8048000+0x1a4b5) [0x80624b5]
[ 7587.474] 13: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb74c2c76]
[ 7587.474] 14: /usr/bin/X (0x8048000+0x1a0a1) [0x80620a1]
[ 7587.474] Segmentation fault at address (nil)
[ 7587.474]
Fatal server error:
[ 7587.474] Caught signal 11 (Segmentation fault). Server aborting
[ 7587.474]
[ 7587.474]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 7587.474] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 7587.474]
[ 7587.483] (II) Power Button: Close
[ 7587.483] (II) UnloadModule: "evdev"
[ 7587.496] (II) Video Bus: Close
[ 7587.497] (II) UnloadModule: "evdev"
[ 7587.510] (II) Sony Vaio Keys: Close
[ 7587.510] (II) UnloadModule: "evdev"
[ 7587.523] (II) Power Button: Close
[ 7587.523] (II) UnloadModule: "evdev"
[ 7587.536] (II) UVC Camera (05ca:183f): Close
[ 7587.536] (II) UnloadModule: "evdev"
[ 7587.563] (II) Logitech USB Optical Mouse: Close
[ 7587.564] (II) UnloadModule: "evdev"
[ 7587.589] (II) AT Translated Set 2 keyboard: Close
[ 7587.590] (II) UnloadModule: "evdev"
[ 7587.643] (II) PS/2 Generic Mouse: Close
[ 7587.644] (II) UnloadModule: "evdev"
[ 7587.718] (II) UnloadModule: "synaptics"
[ 7587.719] (II) AIGLX: Suspending AIGLX clients for VT switch

Firefox starts but all i get is a white blank screen

i was having a problem with my computer, it would start but then it would like do nothing. it wouldn't let me log on. so after doing all kinds of things i finally figured out it was the cable going into the monitor that was messed up. but after that when i tried to go into firefox all i get is a blank white screen with a tool bar on top that says mozilla firefox. how do i fix this problem? i have to use internet explorer right now and i hate it. i'm about to take this computer and throw it out the window.
i am certain i didn't do anything to the firefox while i was trying to get my computer to run. i don't know what happened to it. any help someone could give me would be great

-> press '''F11''' to bring the computer out of FullScreen
-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to View Menu -> '''Zoom''' -> click '''Reset''' -> '''Page Style''' -> select '''Basic Page Style'''
-> go to View Menu -> Toolbars -> select '''Menu Bar''' and '''Navigation ToolBar''' -> unselect All Unwanted/Incompatible Toolbars
-> go to Tools Menu -> Options -> General -> '''When Firefox starts : select "Show My Home Page"''' -> Type the address of the website which you want to be your HomePage e.g. http://www.google.com
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
-> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
Now Restart Firefox. Check and tell if its working.

Nothing is opening just blank screen

nothing is opening what wrong

Safari 8?
What happens if you enter an address in the URL address bar and press enter?

Unit totally locked up. now get startup sound and blank screen with red circle with line thru it.

My Macbook is about 4 years oId. I was doing an Excel spreadsheet(apple office suite), went for a short break, on first keystroke the unit totally locked up with the spinning beachball. My mouse could move that around but that was all it could do. After about 4 minutes, needed to force quit it by holding down start up button. let it sit for a couple of minutes and then tried to restart it. I now get the start up chime followed after a short spell with a grey screen with a red circle with a red line though it right in the middle of the screen. tried about 3 more times with the same result. I hope it isn't dead because my project was about 95% complete and just about ready to print.
Any ideas how to revive the ol' girl?

Thanks for the info. Unfortunately more serious then that. took unit to the apple repair techies and needed to replace hard drive. It had a total catastrophic failure and none of the info was recoverable That is a bummer as my last project was quite time consuming and almost complete. Good news I guess is I now have a much larger hard drive memory. Also had them put in much more RAM so now she is purring like a kitten again and a lot faster. Hopefully it will be a while before the swirling beachball of death appears. Thanks again for trying to help.

GET URL opens a blank screen

Similar Messages

Maybe you are looking for