Get Windows Mobile 5 device working with Parallels USB ?

Hi,
I have installed windows XP with parallels and I plugged my phone into the USB port but, it detects with the operating system but active sync cannot connet to it.
Has anyone got it working ?
I have a HTC wizard.
Thanks

Thank you for the tip. I found the fix on this page: http://forums.parallels.com/thread2743.html
It should work to get any WM5 device working.
Hope this helps lots of you.

Similar Messages

HP Photosmart Printer-cannot get the apps to work with a USB hook up

I purchased a HP Photosmart Printer C310 and hooked it up to a USB, not wireless. The apps on the printer will not work, says it has to be on wireless for those features to work. When I purchased it the guy said I could use those apps even if it was on a USB hook up? Any ideas of how to get the apps to work without the wireless?

Make sure you have done this to reset the iPod
http://support.apple.com/kb/ht1320
and that you have restarted your computer since this problem occurred. You should also try disconnecting all USB devices from your computer including hubs (except standard keyboard and mouse if normally used), and connecting the iPod by itself to a direct USB port.
There are no iPod viruses. But data corruption on the iPod's storage is possible.
If doing the above does not help, you may want to do a Restore on the iPod, from the iPod's Summary tab in iTunes. This will erase the iPod, re-install its software, and set it to default settings. If data corruption or a software glitch is causing the problem, a Restore should fix it.

How can I get my iMovie 4 working with a USB Camcorder

Hello everybody,
I bought a Sony DCR SX33E which does not have a FireWire connection. IMovie does not recognize the camcorder and it is not possible to transfer the recorded material to iMovie 4. What can I do to get the camcorder working with my iMovie via USB?
Any help is much appreciated.
Best regards
Zuse

These cameras aren't supported in iMovie. It shoots in standard definition MPEG-2. You'll need MPEG Streamclip to convert the media to QuickTime DV as I don't think that version of iMovie supports other codecs.

700w not recognized by Vista with windows mobile device center

please help:
i have a treo 700w that doesn't want to consistently connect to machine I am working on. when it works (rarely), it works fine, when it doesn't there is no explanation. I have restarted both computer and phone, and I can't seem to get a connection made.
Further I tried to uninstall/reinstall the windows mobile device center, i have removed the sync profiles on both my computer and phone, but nothing is seeming to work. I find it interesting that vista recognized my Smartphone USB device (it shows in the device manager), but that windows mobile device center doesn't show that anything is connected.
I am connecting via USB, but would be happy to connect via bluetooth, but when i try that approach, it only offers headset/wireless stereo (i'm looking for calendar/contacts/etc).
any direction would be wonderful - i have searched in google and subsequent pages for an hour already, and I'm thinking someone must have a better way.
Thanks,
-cb
PS - for those who are forum administrators, the registration process sucks: the password limitations are oddly strong for a simple forum like this, and when you don't put in a proper password from the get-go, it clears your prior selection of device/os/agreement registration, so when you fix the red flags (the password) and submit, it (and only then) tells you that you've forgotten to answer the questions below (that you had already answered before you were thwarted by the password reqs). sigh.
Post relates to: Treo 700w (Verizon)

Hi AlanG,
I have tried multiple USB connections, and do not have another sync cable. No luck.
Though, your post gave me an idea and that was to use a safety pin to scrape the contacts at the bottom of the phone. I keep the phone in my pocket most of the time, so there was some visible grime, though i would have guessed that the connection could have been made (it wasn't that grimy, just not shiny).
The other thing that was interesting is that when it was plugged in previous to the cleaning it shows the device connected to be a " smartphone usb sync ". Post cleaning, it now shows as a " PocketPC ". I'm not sure what the difference is, nor if I should be hoping that it reads "treo 700w", but hey, can't look a gift horse in the mouth, right?
So, that, in addition with removing all partnerships on both the machine and the treo (and after restarting my phone) it finally connected.
Wow. What a remarkable pain. Let's hope it keeps working.
Post relates to: Treo 700w (Verizon)

Palm Pre Tethering to Windows Mobile Device via Dialup Network or USB

I've got a Windows Mobile device that I tethered to the Internet via Dialup Network on my old Verizon phone, and would like to use the Palm Pre for that same purpose. The Windows device does not have wi-fi, so that's not an option, but maybe tethering through USB might work.
Does anyone have any experience with this and can give me some direction on setting it up? Thanks!

there is a way to connect via usb,
refer to precentral.net and do a search.

How to get Cumulative Update packages for SQL Server Compact v3.5 SP2 for use on a Windows Mobile device

There are links on the pages for various Cummulative Updates for SQL Compact v3.5 SP2 which look to relate to the desktop version, but are these also available for Windows Mobile devices? If so, what is the process to get hold of them?
We are seeing intermittent problems with corrupted databases on devices which are using SQL Compact v3.5 SP2 and have seen that some of the Cumulative Updates do relate to corruption and would like to see if these can help to solve the issue.

Just select the KB article, at the top of each there is a link to request a hotfix, you will then get a email with a download link. The 8088 and 8109 hotfixes also apply to Windows Mobile.
http://erikej.blogspot.dk/2010/08/sql-server-compact-35-sp2-downloadable.html
Please mark as answer, if this was it. Visit my SQL Server Compact blog http://erikej.blogspot.com

How to install the JRE that comes with JME 3.0 to a Windows Mobile device

From Sun's JME download page:
Integration with 3rd party emulators and Windows Mobile devices
The new Java ME Platform SDK architecture allows integration of 3rd party emulators and devices. Java ME Platform SDK comes with Sun's Java runtime environment for Windows Mobile. A user can install this runtime on a Windows Mobile device or a Microsoft device emulator and experience all the on-device features of Java ME Platform SDK.*
My question is, how can I install the Java runtime environment that comes with Java ME Platform SDK 3.0 to a Windows Mobile device. I am a newbie in this device programming and I'm setting up my development environment. So far, I have installed JME in my computer, and have also installed both the Windows Mobile 5 and Windows Mobile 6 emulator. I've been searching the internet for answers, but it always points me to using a third party java runtime such us Mysaifu, etc. I would like to stick with what is packaged with JME if possible.
If anybody assist me or direct me to an online documentation on how to do this. All help is greatly appreciated :-)

I had some success installing on a real Mobile 5 device [http://forums.sun.com/thread.jspa?threadID=5344195]
There is a link to a doc on the main download page, item 5 under How to Install. [http://java.sun.com/javame/downloads/sdk30ea.jsp] I used this for the real device, Treo 700w. Did not try it with an emulator.
The support looks to be an emulator rather than a JVM per say. But then again I could be wrong on that. I too had poked around looking for a JVM, CrEme, J9, etc..
I do have a commercial app installed on the Treo that uses IBM's J9, which is seems requires a contact with a sales person to get ahold of. I had hoped to find something that might clue me in on how to "hook up" my own J2ME app with the J9 installed by the commercial package. But I've pretty much decided to get a real J2ME handset rather than continue to waste my time hacking up something with WM. Now the question is which one makes a good reference platform?

Will USB mobile broadband work with Apple TV?

I am considering to get USB modem so I can use the apple TV anywhere. But I have not purchase the USB modem yet. Click below for more info on USB modem:-
http://threestore.three.co.uk/broadband/
I was thinking - USB modem is to be connected to my laptop (via USB port), Apple TV is to be connected to my laptop (via ethernet cable).
The questions are when I switch Apple TV on:-
1. Will Apple TV automatically find the internet?
2. Will the USB mobile Broadband work with Apple TV (Wireless via my computer)?
Please advise.

I'm sure it should be someone answering this question who has actually tried this, but given that the tv is not overly portable I'm not sure you will find too many who have.
FWIW, you can use an tv with a direct ethernet connection or ad hoc wifi network between the computer and the tv, so I don't see why a mobile account rather than a static one should make any difference. You would need to set up internet sharing and all that, but my guess is it should work for you. Be aware though, I haven't actually tried this.

The iTune cannot detect my iPhone. I have already tried all methods suggested, including re-installling iTune, re-activating Apple Mobile Device, plugging in various USB ports, and etc. I use windows 7. How can I solve this?

The iTune cannot detect my iPhone 4S. I have already tried all methods suggested, including re-installling iTune, re-activating Apple Mobile Device, plugging in various USB ports, and etc. I use windows 7. How can I solve this?

The new cable is completely new, and my computer can detect the phone as a drive, and battery charging is ok. So I believe the USB cable works properly. It is so weird that just iTune itself cannot detect the phone, and it is of the most updated version. What else can I do? Thanks.

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.

I am unable to reinstall iTunes. I get the message it was not installed correctly. "Please reinstall itunes (Windows error 126)" Also get "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."

I am unable to reinstall itunes. I get the message that it was not installed correctly. I HAVE DONE A SYSTEM RESTORE, I HAVE TRIED TO REINSTALL SEVERAL TIMES ALSO. I get a error message that it's "Windows error 126". Also get "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."
Help!

Click here and follow the instructions.
(98993)

Can't get Palm Zire to work with windows 7

Can't get palm zire to work with windows
Post relates to: Palm Pilot

Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista. It's all there.
After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

How can I get photoshop CS2 to work with Windows 8.1?

how can I get photoshop CS2 to work with Windows 8.1?

Have a look at
http://forums.adobe.com/message/4976720
Cheers
John

Hi im living in qatar and im ordering iphone 5s from online US apple store i wanted to know would unlocked iphone 5s work in qatar? and would i get t mobile nano sim with the iphone so i can activate my iphone ! please help..

hi im living in qatar and im ordering iphone 5s from online US apple store i wanted to know would unlocked iphone 5s work in qatar? and would i get t mobile nano sim with the iphone so i can activate my iphone ! please help..

No you won't. You can try, but your order will be canceled.
But, yes, the phone is unlocked. But again, you won't be ordering one.

Im thinking about getting a laptop. would windows 7 starter work with the newest version of itunes or would a different version of windows work better?

I just want to make sure it works well because im getting rid of my computer.

iTunes can run in Windows XP SP3 or later versions of Windows, so it works with iTunes

Get Windows Mobile 5 device working with Parallels USB ?

Similar Messages

Maybe you are looking for