Get XBOX sound to mega 180 with SPDIF

Hello,
i have a X-Box. Now i want, that i hear the x-box sound with the mega 180.
I bought the Audio Kit for the X-Box and connected the xbox with the SPDIF input @ the mega with an optical cable.
What settings do i have to do, that i get the xbox sound to the mega? I've installed the newest nforce drivers.
thx for some help

hmmm..just noticed something cool
in Volume Control....u can change Mic in to "Center channel out" and Line-in to "Rear output"
of course the main output is already "front output" ...just need to enable them in Volume Control
and there u go

Similar Messages

Can't get Xbox Media Connect to work with WRT54GX4 router

My Xbox 360 and 2 computers all run through my WRT54GX4 router. They all use wired connections.
I can't get Media Connect to work so I can stream pics and videos through my Xbox.
I have the correct ports set up and enabled per Xbox instructions. but still no joy. When I go to the Media tab and select pictures, it will list my computer but when I try to select it, it fails to connect.
Note that when I go to Library, media sharing on my PC it does list the Xbox there and I have "allow" selected.
Is there a problem with this router and Media Connect? I am running the latest firmware.
Thank you,
- Chris

Thanks DT for the reply!
As noted, my Xbox actually is connected wired, not wirelessly.
I have all the ports open, but I am unclear on whether the IP address I enter into my router here should be for the *host PC* (in my case IP *.101) or for the Xbox (*.103). The Xbox instructions aren't crystal clear here... they just say the ports must be open for your computer.
I've tried it both ways and neither works, but would like to know which is correct so I can give it another go.
Thanks,
-Chris
P.S. - I've also gone through MS tech support (phone) to no avail.

Trying to get my sound card to work with ArchLinux

Okay, let me tell you my problem. I'm still somewhat of a noob when it comes to linux so don't be hard on me . And, yes that's half of my problem, anyways I've got a sound card called the Soundblaster X-FI USB and I've been trying it to get it to work with the alsaconf command which hasn't worked of course Let me point out that whenever I use my backup flashdrive with PuppyLinux it the Alsaconf inside of it see's the card that I'm using and automatically sets it up.. Plus whenever I type the ' cat /proc/asound/cards ' command I get this..
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xefffc000 irq 21
1 [S51 ]: USB-Audio - SB X-Fi Surround 5.1
Creative Technology SB X-Fi Surround 5.1 at usb-0000:00:1d.2-2, full speed
*(The first one being my dead onboard audio)
So please help me out here I really want to have sound again and hey maybe I'll learn something new about linux!

konni wrote:
mhhm... the creative x-fi support for linux seems to be rather bad...
--> http://www.phoronix.com/scan.php?page=n … &px=Njc3Mg
there's some experimental driver that maybe makes it work with alsa, see here:
http://www.phoronix.com/scan.php?page=n … &px=Njc3NQ
My card is a USB which isn't compatible with the driver that they include. So no help there ;(. I've loaded Ubuntu recently and it has worked perfectly with my soundcard (Creative X-FI USB Surround 5.1) right out of the box. I personally think there has to be a way to get it to work in Archlinux since it worked in Ubuntu...
Although. I suppose I could just use Ubuntu but I'm more of a fan of Arch. So does anyone have any idea what Ubuntu used as in drivers wise to get my card to work in linux??

Unit totally locked up. now get startup sound and blank screen with red circle with line thru it.

My Macbook is about 4 years oId. I was doing an Excel spreadsheet(apple office suite), went for a short break, on first keystroke the unit totally locked up with the spinning beachball. My mouse could move that around but that was all it could do. After about 4 minutes, needed to force quit it by holding down start up button. let it sit for a couple of minutes and then tried to restart it. I now get the start up chime followed after a short spell with a grey screen with a red circle with a red line though it right in the middle of the screen. tried about 3 more times with the same result. I hope it isn't dead because my project was about 95% complete and just about ready to print.
Any ideas how to revive the ol' girl?

Thanks for the info. Unfortunately more serious then that. took unit to the apple repair techies and needed to replace hard drive. It had a total catastrophic failure and none of the info was recoverable That is a bummer as my last project was quite time consuming and almost complete. Good news I guess is I now have a much larger hard drive memory. Also had them put in much more RAM so now she is purring like a kitten again and a lot faster. Hopefully it will be a while before the swirling beachball of death appears. Thanks again for trying to help.

Poblem with software to msi mega 180

hi, I have bought a Msi mega 180 with amd.
i have installed the software. mega deluxe 3.
Everything is working fine,but when i try to listen to music via, multimedia part, the program crash. when i press ctrl+alt+del i got the error program not respondinging.
I have reinstalled the program 3 times but i still have this problem.

Thanks for posting the link AtHoSsIcO. I still have the same problem, even with the new software. I have downloaded the lastest drivers
Audio driver version 4.31 (WHQL)
Audio utility version 4.31
Ethernet driver 3.39 (WHQL) + TOT.nvu
GART driver 3.43 (WHQL)
MemCtl driver 3.38 (WHQL) + TOT.nvu
SMBus driver 3.43
WinXP IDE 2.5 driver version 4.12 (WHQL) + updated nvuide.exe and txtsetup.oem
Installer version 4.31
I have installed the latest version (45.3), but I still get the same thing, I click on music and 'loading' in green writing appears in the left hand top corner, then nothing loads and the program crashes and I have to press ctrl alt delete to get out of it. The green writing that appears is very similar to when I use special funtions on my logitech cordless keyboard, not sure if the 2 are related. Any idea what could be causing the crash?

I am unable to get sound using apogee jam with my guitar. I can see input levels but no sound. What step am I missing?

I am unable to get any sound using apogee jam with my guitar in logic pro 9. I am using Macbook pro.

status...
DWdrummerBeam
Jun 4, 2012 3:24 PM
I think I have done something wrong. I used my Apogee Jam on a guitar project with several audio tracks in Logic Pro 9. And while the Apogee Jam still was connected, I switched to another project with only instrument tracks (synths). I forgot to change the "Built In Input". After I did this, my guitar sounds like crap when I try to use Apogee Jam in the same guitar project, or also if I create a new project. I use Guitar Rig 5 (Native Instruments) as my guitar plug-in. But the guitar sounds strange even if I don´t assign Guitar Rig.
Can somebody help me?

I can't get any sound through speakers with monitoring on either - using imac with guitarlink audio interface

I can't get any sound through my speakers with monitoring on - i'm using a behringer usg102 audio interface and garageband is recognizing the input - i just can't hear the output - any suggestions? thanks!

vickyfromla quinta wrote:
i have the usb selected as the input device
and the output?
vickyfromla quinta wrote:
but it won't allow me to set the input level. when i try to move the slider, it automatically moves itself back to the far left side.
that's not the problem:
http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled
(Let the page FULLY load. The link to your answer is at the top of your screen)

Mega 180 using the LCD with Linux

Hi all,
is it possible to use the LCD of my MEGA 180 with Linux? I am using 2.6.9-rc2, would be cool to the see LCD working under Linux, too.
Best regards,
Everlast²

There are several forum members working on customising the LED display for the MEGA 180, including myself. The biggest problem at the moment is the lack of information about the hardware specifications of the display. The blueprints of the exact module are definately NOT released by MSI , but perhaps that specifications of very similar displays are also usable. Another problem that's next in line, is going to be that we will need someone who is into hardware programming. First lets wait for a definitive answer about the blueprints. I'll let you know when more info becomes available.
JaDi.

Mega 180 - Ram Eater????

Let me begin by saying *$*$%#@)!!!!!!! OK, now that I got that out of my system, here's my problem. My MEGA 180 eats RAM.
You see, I built a Mega 180 with a single stick of RAM, 512 MB. After a few days, the thing wouldn't boot. It wouldn't even POST. It just sounded a beep code that indicated bad RAM. I took out the RAM, put it in a different machine and yeseereee, the RAM was indeed dead. The stick is being RMA'd right now.
So the machine would still be functional, I put in two sticks (256 MB each) of RAM, used the machine for a few more days and, you guessed it, I got the same POST beeps. Well, one of my sticks went bad. I took theses sticks from another machine and there was nothing wrong with them (there is now!).
So, my first stick wasn't defective after all. My Mega 180 is frying RAM. I'm not overclocking the system or over volting the RAM.
Has this happened to anyone else???? I'm guessing the motherboard is bad. That means this will be the second time I've had to RMA this thing back to MSI

Hey jamierooney!
I've had very few problems with the NEC drive, and the ones I do have might as well be related to the Mega - it's hard to know without trying another drive.
In Windows everything works ok, though I've had the occasional famous "freeze", where the drive tray won't close after being opened. Seems to be bad drivers causing that one, and I've learnt to get around it in most cases.
Burning DVD-R works as a charm, with quality 4x discs there are no problems burning in 8x.
The real annoyance right now occurs in hifi-mode; sometimes when playing an ordinary audio-cd the playback ends abruptly, and either "SEARCHING" or "NODISC" is shown in the LCD. This is the case with both original CD's as well as with CD-R copies, so it's not a matter of bad discs.
But as I stated above, I don't really know if it's the drive or the Megas fault, but I will have to find a cure before my girlfriend gets really upset about it
-M

WMVHD on Mega 180

Hi,
I ask your help to understand if my Mega 180 with 1 gb ddr and integrated geforce4 (with 128 mb dedicated) can play smoothly wmvhd.
Is there any bios setting that can solve the problem?
Or I have to use the latest nvidia drivers?
Or simply I have to add an AGP video card?
Thanks in advance.

So far I tested the ATI 9200, the situation improves a little, but only on WMV 720p, not on 1080i.
Please help me to solve my problem. Should I:
-upgrade my bios
-change some config on present bios
-install a more powerful CPU (maximum allowed Athlon 3000+)
-install an additional GPU like GeForce 6600 even if is suggested only with a PSU of 300 Watts and my Mega 180 has a 200W(PFC 5V/12V SB) Full Range
the last solution is the most suggested but I'm scared about heating on my case.
Thanks in advance
Renato
Configuration:
Mega 180
CPU Athlon 2600+
1Gb (2x512) RAM DDR400 V-Data
HD Maxtor 160Gb IDE
DVD Burner Pioneed A109
Integrated audio
Integrated Geforce4
USB-Bluetooth Dongle
Bluetooth trackball keyboard DigitalRise (http://www.digitalrise.biz/products/input/keyboard_btb/)
Windows XP Pro SP2
Latest Nforce Sound drivers and Nvidia Video drivers
TV CRT Philips 32PW9308 32 inch. 16:9 100hz (via S-SHS)
Screen Resolution 720x480
Audio output by Creative GD580 5.1 Surround Speaker (Dolby & DTS)

Advice needed for buying an AGP card for MEGA 180

Since 1 year I have a MEGA 180 with a SEMPRON 2500 processor, 512 MB DDR RAM, Lite-On DVD-R/W, Hauppauge PVR-150 running MediaPortal 2.0.0.0.-RC4 and it rocks!
I am not so happy though about the TV-output of the integrated GF4MX that came with the nForce2 chipset. I would like to disable this and insert a low profile, passive cooled nVidia-6200 with 128 MB-DDR. I am a bit worried about the power requirements of the card and the juice that the power supply (200W ) can deliver. Is it safe to use this card or should I adjust my demands? I am using the system for media purposes only, e.g. recording and watching recorded TV, watching movies and playing music. MediaPortal requires a DirectX-9 compliant card, DirectX-8 also works but with video artefacts. Gaming is no requirement.
Can anyone please advice what to do ???
Thanks in advance, Leo

Quote from: johnsaunders18 on 21-December-06, 06:08:32
get a nvidea 6200 they are fine, on a mega, i have built 3 machines based on teh mega 651 and they are all fine
hope this helps
john
Now that's what I call a quick answer
Thanks, John.

MSI MEGA 180 Media Centre Full Screen Button

I have a MEGA 180 with Media Centre III and was wondering if there was a button on the remote that does full screen instead of having to start the item you wish then trying to navigate to the button and pressing ok?
This is for the sections such as MP3 mode for the visulisations or Video Clip mode for full screen home movies.
I have tried all of the buttons but none of them seem to work.
Any help would be apprecitated
Cheers.

That makes the MCDIII run in full screen, but the video (etc) still runs in a window inside the MCDIII App. The only ways I found were to set the settings to auto maximise the display, or to press the button to the bottom right of the picture. Also I found there was no way of getting back to menu mode without using the keyboard (unless you were prepared to navigate the buttons without seeing them!!!).
This made MCDIII totaly unsuitable as a remote controlled application, and hence I binned it. I now use MediaPortal which works well. Just need to find a better way of getting the DVD filters to work.

Mega 180 no post/video

o_0I've looked over the forum and I haven't found anything that could help (but if you know of a thread that has pertinent info then do tell). Anyway I've been working on my Mega 180 on and off for about a month and I still can't get it to post. I think all of my jumpers are correct and I've tried to dismantle component by component, but no avail (the only thing I got was some beep codes when I took out the ram).
I can tell you that the HD seems to grind a bit, the lights to the keyboard flicker on, and the fans spin when I power up (but no video...nuttin'). I even bought another processor just to make sure it wasn't that.
Could just be a general problem but I was just wondering if there was a persistent issue with the Mega 180s that could prevent it from booting.
I've built a few computers and I figured all those out, but this one is bothering me. Thanks for any help.
By the the way I got:
Athlon 3000+
2x256mb Generic DDR2700
80mb Generic IDE HD
Memorex CD-RW/DVD Combo Drive
Thanks for any help.

Anyone ever get one of these mega 180's to post/work with only a single stick of ram? Or, am I going to find myself going to buy a second stick tomorrow? I might be able to get my hands on a second stick tonight, who knows though.
I'm having the same situation described above. The monitor I am using indeed works, as it is on a KVM. I have tried both VGA ports on the unit, to no avail. I have also tried both PCI and AGP graphic cards, and still no avail. The only beep is when I remove the RAM. *sigh*
cpu: amd barton 2500ish..
ram: 1x corsair 256mb pc2700
hdd: 120gb wd
cd: p.o.s. that is sittin plugged because it died on me when trying to troubleshoot this thing.
cpu and ram were just taken from a working PC that I decided to scrap, as I wasn't using it.
I'm too tired to keep playing with this tonight. So far, I feel I just bought a $300 radio that isnt worth $300.
...just tried another stick of ram, a generic 256mb.. it's a pc3200, but it was just laying there, asking to be tried. still, no go.
ok then guys. just ignore me. i decided to take the whole darned thing apart, to see the board in it's entirety, thinking maybe something was out of place or something...
i get it stripped, and to my disappointment, nothing. a rather bare board. so, i mount it all back as I think it should go. for giggles, i decide to boot it up (original equipment, mind you...only now, alchohol is in my system.) and, i suddenly get post. o_O
lets hope it statys that way. :D

Mega 180 beeps, no POST

Ok I guess I need to sit down and tell you the whole story. I have a Mega 180 system that worked fine for two months (heck the best system I ever had) I decided to put the all in wander graphics card in to the system. I was going to the AGP slot of the motherboard of the mega 180. I went to the bios and saw something about high performance and about the AGP 8X knowing that my graphics card is for the 8X I decided to hit that save the Bios and shut down the system to put in the AGP card. After installing the card I started up my system and I got nothing to the screen, then the Mega made beep ever 3 secs. I shutdown the system by pulling the power plug. Waited 10-15 sec and tried it again, still no screen and the beeps. I pulled the plug again and uninstalled the graphics card. I again started the Mega up and switch the monitor hookups back to the built in graphs card. Still no screen and the beeps. My next guess was it had something to do with the Bios. I did the whole jumper thing and still got the no screen and the beeps. I even pulled out the battery and unplugged the power supply to the motherboard and waited 24 hours. Hooked back up everything installed the battery and powered up the system. And got no screen and the beeps. Ok maybe it is something elese so my sister having the same Mega as I do a 180(and thanks again sis for you help and the trust to use you mega as a test base) I pulled every thing out of my mega 180 and installed it in her’s. I put in the Memory, processor, hard drive, DVD-ROM. It worked with out a flaw it was just like before. I even tested the graphics card with out going to the bios (real trust from my sis or did I not say this is what messed up mine oh well) and the graphics card worked fine. So after another time spent I put back together my mega 180 (with out the graphics card in the AGP slot) and still got the no screen and the beeps. I then tested what the on line forms asked. I tried to put in other graphics cards in the other slot to see if it was looking there for a card, no luck. Then I took the hold thing down to BEST BUY (they have helped out before good Guys there) and they spent all day messing around trying to clear the bios and trying different memory and different graphic cards and no luck. They said to call in the warranty and see what MSI will do. (They did not charge me a thing for their time, and many of them I know want one now too even with this mess up I think this is the best thing out there in the world of pcs)
Ok so that bring us here and I thought to give you guys here a try be for I go ask MSI
Again thanks to all that help, I wish I could do more then say thank you.
Heck one more thing I would have done the redo of the flash the bios thing with the new file but the mega 180 does not have a floppy drive so no A drive.

Thanks for splitting this from the other topic to avoid any confusion.
I did use a can of air when I rebuilt my mega 180 after I tested all the parts in my sister Mega 180. And best buy looked over every thing and did not see any thing wrong. (four eyes always are better then mine) At this point I’m out of ideas thanks again for all you help guys. I guess I’ll send an email to MSI today and see what they say. (in a year or two I’ll hear something) I thought it would be fair to start here before going to MSI. In all, I hope this is truly a rear thing that happens to mega 180's for I still say this the best case to get. I love this case and I got two of my friends to buy one and my sister has one. We all love our Mega's a lot. (Heating can be fixed with a little work ok) And the radio rocks and the looks cant be beat. I will keep you all updated and again if you all have any ideas please post them here you never know one day this might happen to you.

Mega 180 not detecting processor correctly

Ok, sorry I made two threads recently, I'm new around here and I am not certain how you guys do things..
Anyway,
Mega 180 with a barton 2600 installed and it detects it as 1.5 ghz. any ideas on how to get it to detect correctly?
Thanks

Read up on Johnrr6 sticky at the top of the forum. I too had a heck of a time trying to get my 2500 barton to not be a 1100mhz system until I took the steps that john outlined and now it works great @1830mhz.
Give it a browse here: https://forum-en.msi.com/index.php?threadid=46409&sid=

Get XBOX sound to mega 180 with SPDIF

Similar Messages

Maybe you are looking for