Geting back deleted objects

Hi Experts,
is there any way to get back a deleted object after activating it in ID? any chance?
I know this is not possible .... still if there any chance?
Thanks
Sugata

Hi,
It doesn't matter. Try this link.
/people/robin.schroeder/blog/2006/11/21/receive-deleted-xi-objects
Its a simple 3 steps approach.
Step 1: You have to create a new Object with the same name in the same namespace of the Object you want to receive.
Step 2: Activate the New Object.
Step 3: Open the History of the Object and now you see the old Objects before deleting.
Regards,
Sarvesh

Similar Messages

Get back deleted objects

Hi colleagues,
If I delete an object, how can I restore it? I see the object in my transport request (not released). I think that it is possible but I couldn't find out how to do it.
Thank you very much!
Regards, Marina

Hi,
1.if it is TEMP ($TMP) program then no chance of getting that.
2.if it is Associated with Request and Not yet Transported at least once also Leave it,
3. if it is Transported ,after that you deleted then you can Bring it back
4. if you have Backup in to some notepad(PC file) then upload it again.
5. final thing re write it from scratch.
Reward points
Regards

How to Retrieve Last Deleted objects after activating

Hi Experts
Is there any way to get back the deleted objects. I mistakenly deleted few imp objects and now wondering do XI have some versioning to get that back.
Regards
DhanyaR Nair

Hi,
If you know the exact name of deleted object you can get the same with this technique.
Step 1: Create a dummy object with the same name [of course your namespace etc should be same as your deleted object]
Step 2: Activate the new object
Step 3. Check the History [From menu] and you can select the previous versions you were deleted.
Hope this helps.
Regards,
Ananth

View deleted objects - LDP.EXE

Hi, last week I deleted some disabled users and computers. My domain/forest functional level is Windows Server 2008 R2 without enabled AD Recycle Bin feature. Having started ldp.exe utility on domain controller with all FSMO roles on it, I noticed that
none of deleted users/computers was listed in deleted objects container in ldp.exe. There were only DNS PTR records and some GPOs listed. A few years ago I tested ldp.exe utility and I was able to find deleted test user. We have
Backup Exec software as main backup software - used for backing up AD, Exchange, SQL . . . but I just want to know why this happens with ldp.exe.

Hi,
Checkout the below link to search for deleted objects in Active Directory,
http://support.microsoft.com/kb/284928/en-us
From the above link, in the fifth point (5. In the Filter box, click (isDeleted=*).), replace the (isDeleted=*) query to
(&(objectclass=user)(isdeleted=*)) to filter deleted users.
From (isDeleted=*) query, iam unable to find the deleted users from the large list, using the second one I am able to find the users.
Regards,
Gopi
JiJi
Technologies

Restore deleted objects with local transports ?

hi experts,
while trying to delete existing source system and create the same again in RSA1, I deleted some of the BW objects as it was asking to delete. Now I could not activate the bw source system, which I created newly. I have local transport created for the deleted objects. Is it possible to restore the deleted objects back.
Thanks,
Usha

Hi,
Welcome to SDN !!!!!
Is it only single BI system or any other BI system exists. If exists are these deleted objects moved to that other system. If yes then try to create the requests of deleted objects in that system and then transport them here. If it is only a single system then as per my knowledge I dont think it is possible to resote them from local requests. Normally if you have two clients in a system and if you want changes from one client to be copied to other then we do it using SCC1. But I guess you BI system might have only one client and I think transporting them in the same client would not work. But anyhow just give a try by using SCC1 tcode.
In last case check with your BASIS consultant if they are taking backup and till what date backup exists. If backup exists then ask them to restore the same and this will restore the complete system to date of which the backup exists.
Regards,
Sharath

Message Monitoring & Delete Objects

Hi,
1.How to clear messages under message monitoring?
2.How to delete objects forever under Integration Repository?
3.How to delete objects forever under Integration DIrectory?
(in I.D, i selected one scenario and deleted using right click menu.. and its going to 'Change Lists' tab. If i right click and say Reject Change there and its coming back to Scenarios tab)
Thanks
Seshu

1.How to clear messages under message monitoring?
Follow Archive and Delete Messages in SAP XI: A Step-by-Step Guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
2.How to delete objects forever under Integration Repository?
In a namespace delete all the objects including ExchangeLogData and ExchangeFaultData data types then before activating, go to SWCV, delete the namespace then activate the changes. Now in the same screen where you enter the namespaces, in the menu, use the delete option.
3.How to delete objects forever under Integration DIrectory?
in I.D, i selected one scenario and deleted using right click menu.. and its going to 'Change Lists' tab. If i right click and say Reject Change there and its coming back to Scenarios tab)
That means...you are deleting the object and the from the change list, rejecting that delete action. Instead, activate the change list. Two negatives make a positive.
Regards
Shravan

Dreamweaver deletes objects (and is super laggy)

It took my 2 months to get rid of the slow laggy typing issue and now Dreamever decides to delete objects from my page. Every time I make a link, edit a photos properties, change a table, anything, as soon as it applies the change it deletes the object from the page. Luckuly I can "Command Z" it back but it is the most annoying thing in the world right now.
Also it goes through periods of being super slow to even select and highligh text or tables.
Please get a stable release out and forget all the fancy new stuff without making sure the basic functions work!
I'm on a macbook pro, quad core, 2.6 Ghz, 18gb Ram.

Validate code and fix reported errors.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
If that doesn't improve performance, try changing workspaces in DW.
Nancy O.

Restore deleted objects

Hi experts!,
I used FM RH_OBJECT_DELETE to delete some objects. Are there any FM for restore objects?
A lot of thanks in advance.
Best regards.
djlu

I don't think it is possible to get back the deleted objects. You need to create them again. You can do it by using the same technical name.
The transport request in which you have these objects collected will be containing the information about the deletion of these objects, So if you move this transport to test environment then these objects will also get deleted from there.

BW variable: Inconsistent in loading. please check use of deleted objects

Hi Experts,
I encountered an error and can not solve it following OSS note.
When I create a variable in query definition for an infoobject, it prompts an error dialog 'Inconsistent in loading. please check use of deleted objects'.
I checked the OSS notes 792779, there is a such description:
The variable existing in the table RSZGLOBV, but not existing in the tables RSZELTDIR or RSZCOMPDIR have inconsistent definition. These situation may return 2 different error messages. When a variable is missing in RSZELTDIR table (or in both together), an attempt to expand a list of variable under a corresponding InfoProvider or a list of text/formula variables will return a message 'Inconsistency in loading...'. All variables which are created for corresponding InfoProvider, text/formula variable are not available. When a variable is missing in the RSZCOMPDIR table only the error message is 'Missing UID XXXXXX... in RSZCOMPDIR! You may continue to work, but this component is not loaded' in Query Designer
But I checked these tables RSZGLOBV and RSZELTDIR and RSZCOMPDIR. I can find a variable for this infoobject, such as TC_SREG, in these tables. That is, this variable should be availbale in the query definition.
I don't know why.
My sap bw is 3.1, without the program 'ANALYZE_RSZ_TABLES'.
Many thanks for you help.

Hi,
While installing business content make grouping as Data Flow before and collection mode as 'Automatic'. Then expand the Tree in the tree you can see Info Object Catalogue. All installed and activated object will be in green (Active Mode). those will be normally unchecked to install anyway cross check and if found anything check deselect them. Go for Simulation Installation to identify unforeseen errors. Install the same and activate entire data-flow.
Hope your issue will be resolve
Thanks
BVR

How to determine deleted objects in a transport

Hi
I create a new report Z_TEST_1 and assign this one to a new transport request.
Now I rename this report to Z_TEST_1B
In my transport are two entries:
-Z_TEST_1
-Z_TEST_2
Now I read this objects with function module TR_READ_COMM
Afterwards I want to analyse the objects of this transport
But how can I see which objects exists and which not?
I only need the (still) existing objects (in my test case: Z_TEST_2)
I don't want to check every single object if this object still exists. I know I could check the entry in table TRDIR (for reports).
But there are a lot more object kinds in my transport (function modules, dictionary objects, forms, table keys)....
Does anyone have a simple solution for this problem?
Thanks
Andy

Hello There.
SE03 is for finding the existing objects according to your first question (for function modules, reports, etc).
As your object is not imported or transported.
You need to find your deleted objects in Transaction SE95.
In the window beneath,
1. Go to window, Reset Objects.
2. Check the deleted objects.
3. You can also mention your request or package.
4. Execute.
5. Go to Deleted objects node.
6. Navigate to the node desired.
7. You can also find the request related to that business object by clicking on find requests.
These are the logs.
If you have already tried out then its good or else give feedback.
Good Luck & Regards.
Harsh Dave

UnitOfWorkChangeSet and deleted objects

I would like use the UnitOfWorkChangeSet for auditing changes made to the objects. It seams that the UnitOfWorkChangeSet contains new objects and updated objects, but I cannot find deleted objects. The function UnitOfWorkChangeSet.getDeletedObjects always returns an empty set.
1) How to get deleted objects?
2) Where can I find the best information about usage of the change sets?
3) Can I process the change set after calling the method commit or is it better do it in any SessionEvent method (if so - which method should I use?)?
Thank you in advance for any help
Jan Kostrhun

Hello Jan,
For effeciency reasons the deleted objects are only placed in the UnitOfWorkChangeSet in the case of Cache Coordination (Cache Synchronization). If your application is not configured to use Cache Coordination the deleted objects can be found in unitOfWork.getObjectsDeletedDuringCommit(). Please note that this is an internal method in TopLink that may change in future released.
Accessing the UnitOfWorkChangeSet after you have called commit is fine.
--Gordon

How to delete object in Integration Repository SAP PI 7.0

how to delete object in Integration Repository SAP PI 7.0

Hi Rashmi,
Right click on the object, you would find the option to delete--> select it. Goto Changelist Tab and activate the changes.
Ref: /people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Re: How to delete/remove the software component from integration repository
Thanks,

How to get back deleted photos and contacts???

First time to sync iphone 4 to computer and I have accidently deleted all my photos and contacts! All the photos from my computer are now in albums on my iphone. Any help in how to get back deleted photos and contacts would be greatly appreciated.
Thanks,
Sandra

Hi Allan,
Thanks for the reply. I restored from backup but now all photos from computer are gone, plus messages since yesterday etc.!

Error - Trying to delete objects (Positions)

Via Report RHRHDL00, I am trying to delete a few positions, I created for Testing.
I am getting error u201C STOP: The information entered is incorrect, Cost Center missing . Please contact your SAP Rep before completing this.
I am getting the same error via Tcode RE_RHRHDL00
Why should I get this error, when I am just deleting objects?
Please help.

You can use the above report to delete the OM object. However first remove the OM and PA integration if the postion is still assigned and then execute.
In case you want to delete the person completely you can use the program RPUDELPN.

Querying deleted objects container in Active Directory using JNDI

Hi,
I am trying to query deleted objects container using JNDI which fails with error 64.
Has anyone seen this or knows how to query AD using binary data in JNDI.
Seems to me there is some problem with the search base.
search base: <GUID=18E2EA80684F11D2B9AA00C04F79F805,dc=engserver,dc=com>.
filter: objectclass=*
search scope: subtree
This is the error:
Search example failed.
javax.naming.InvalidNameException: <GUID=18E2EA80684F11D2B9AA00C04F79F805,dc=eng
server,dc=com>: [LDAP: error code 64 - 00000057: LdapErr: DSID-0C090563, comment
: Error processing name, data 0, v893 ]; remaining name '<GUID=18E2EA80684F11D2B
9AA00C04F79F805,dc=engserver,dc=com>'
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2802)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2616)
at com.sun.jndi.ldap.LdapCtx.searchAux(LdapCtx.java:1744)
at com.sun.jndi.ldap.LdapCtx.c_search(LdapCtx.java:1667)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_search(ComponentDirCon
text.java:368)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCom
positeDirContext.java:328)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCom
positeDirContext.java:313)
at javax.naming.directory.InitialDirContext.search(InitialDirContext.jav
a:245)
at jSearch.main(jSearch.java, Compiled Code)
Thanks,
Chetan

I thought I had posted one of these. How remiss of me !/**
* deleted.java
* 5 July 2001
* Sample JNDI application to search for deleted objects
* Modified December 2004 to add Win2K3 lastKnownParent
import java.util.Hashtable;
import javax.naming.*;
import javax.naming.ldap.*;
import javax.naming.directory.*;
import com.sun.jndi.ldap.ctl.*;
class DeletedControl implements Control {
 public byte[] getEncodedValue() {
 return new byte[] {};
 public String getID() {
 return "1.2.840.113556.1.4.417";
 public boolean isCritical() {
 return true;
public class deleted {
 public static void main (String[] args) {
 Hashtable env = new Hashtable();
 String adminName = "CN=Administrator,CN=Users,DC=ANTIPODES,DC=COM";
 String adminPassword = "XXXXXX";
 String ldapURL = "ldap://mydc.antipodes.com:389";
 env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
 //set security credentials, note using simple cleartext authentication
 env.put(Context.SECURITY_AUTHENTICATION,"simple");
 env.put(Context.SECURITY_PRINCIPAL,adminName);
 env.put(Context.SECURITY_CREDENTIALS,adminPassword);
 //connect to my domain controller
 env.put(Context.PROVIDER_URL,ldapURL);
 try {
 //Create the initial directory context
 LdapContext ctx = new InitialLdapContext(env,null);
 //Create the search controls
 SearchControls searchCtls = new SearchControls();
 //Specify the attributes to return
 String returnedAtts[]={"distinguishedName","lastKnownParent"};
 searchCtls.setReturningAttributes(returnedAtts);
 //Specify the search scope
 searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
 //specify the LDAP search filter
 String searchFilter = "(&(objectClass=user)(isDeleted=TRUE))";
 //Specify the Base for the search
 String searchBase = "DC=antipodes,DC=com";
 //initialize counter to total the results
 int totalResults = 0;
 //specify the Deleted control
 Control[] rqstCtls = new Control[] {new DeletedControl()};
 ctx.setRequestControls(rqstCtls);
 //Search for objects using the filter
 NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
 //Loop through the search results
 while (answer.hasMoreElements()) {
 SearchResult sr = (SearchResult)answer.next();
 totalResults++;
 System.out.println(totalResults + ". " + sr.getName().toString());
 // Print out some of the attributes, catch the exception if the attributes have no values
 Attributes attrs = sr.getAttributes();
 if (attrs != null) {
 try {
 for (NamingEnumeration ae = attrs.getAll();ae.hasMore();) {
 Attribute attr = (Attribute)ae.next();
 System.out.println("Attribute: " + attr.getID());
 for (NamingEnumeration e = attr.getAll();e.hasMore();System.out.println(" " + e.next().toString()));
 catch (NullPointerException e) {
 System.err.println("Problem listing attributes: " + e);
 System.out.println("Deleted objects: " + totalResults);
 ctx.close();
 catch (NamingException e) {
 System.err.println("Problem searching directory: " + e);
}

Geting back deleted objects

Similar Messages

Maybe you are looking for