Geting error when installation of RCU home
Dear friends,
i am stuck on when i am installing rcu home, during installation when webcenter space came that time only this error happen.
RCU-6083:Failed - Check prerequisites requirement for selected component:WEBCENTER
Please refer to RCU log at C:\RCU\rcuHome\rcu\log\logdir.2009-11-11_10-51\rcu.log for details.
RCU-6107:DB Init Param Prerequisite failure for: PROCESSES
Required Value = 300, Current Value = 150, Comparison Operator: ">="
RCU-6092:Component Selection validation failed. Please refer to log at C:\RCU\rcuHome\rcu\log\logdir.2009-11-11_10-51\rcu.log for details.
So, any body know this problem, please suggest me.
thanks
sanjay
Hi sanjay,
You have the incorrect forum. You are looking for the Webcenter 11g or 10g. For Spaces, wikis, discussions, and blogs server, etc,etc.
This forum is strictly, Webcenter Interactions or integrations into Webcenter Interactions.
"Webcenter" (the name) in general can generally treated as a GROUPING name. Interactions is our product and Interactions does not use the RCU Tool at all.
I fortunately had installed Webcenter Suite 11g (for fun) and may have the answer for you!
Possible answer:
I am assuming you did not configure your Default Oracle database enviroment.
If you check your init.ora file there is a parameter called PROCESSES. The default is 150.
You must change it to 300 or higher. Restart your database, them rerun your RCU Tool. The error will go away and you can continue configuring your Tablespace and schema users.
The RCU tool for creating user schemas and tables spaces for WEBCENTER 11G will do the check against your oracle database and throw the below error.
RCU-6083:Failed - Check prerequisites requirement for selected component:WEBCENTER
Please refer to RCU log at C:\RCU\rcuHome\rcu\log\logdir.2009-11-11_10-51\rcu.log for details.
RCU-6107:DB Init Param Prerequisite failure for: PROCESSES
Required Value = 300, Current Value = 150, Comparison Operator: ">="
Cheers!!!
RichardL
Similar Messages
-
Page cannot be displayed error when login to EBS home page
Hi All,
I have some problem login to EBS page, if only one responsibility is active to user it will get error Page cannot be Displayed error 404 on the Main Menu.
However if 2 or more responsibilities are active no error will come up and it will show all responsibilities.
Below is the log I got from apache.
[Thu Apr 28 15:58:26 2011] [warn] mod_plsql: Stale Connection due to Oracle error 6502
[Thu Apr 28 15:58:26 2011] [error] mod_plsql: /pls/XXX/OracleNavigate.menuBypass ORA-6502
ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error
ORA-06512: at "APPS.ICX_CALL", line 1077
ORA-06512: at "APPS.ORACLENAVIGATE", line 2358
ORA-06512: at line 28
Appreciate if someone can share something about this.
Database Server
RDBMS : 10.2.0.2.0
Oracle Applications : 11.5.10.2
Thanks a lotHi All,
Thanks for all your help.
Seems I already found out the issue.
Since we are using "Personal Home Page" for the system profile option "Self Service Personal Home Page Mode" I checked oracle note and found out
that 11i did not support this mode. Maybe this is the problem that is why we are getting page cannot be displayed error when only 1 responsibility is active.
The way to fix this, is to use mode 'Framework Only' instead of 'Personal Home Page' as Oracle are phasing out mod_plsql based UI and it will not be present in future releases. No maintenance is being performed (i.e. bug fixes) to the mod_plsql based UI technology.
Please check this note for more clearer explanation:
Is The 'Personal Home Page' Mode Supported In Oracle 11i Applications? [ID 368628.1]
Again, thank you for your help! -
Geting error when build installer
I'm getting Error 33 and dotnet x86 ni language pack error and build stops
how can I solve this issue?
Building executable is fine, but the problem occurs during building installer.
Please advice
regards
Pierre Tannoury
Pevatech International S.A.R.Lthanks for helping,
i still receive another messages but the dotnet error message is gone
please see below the building status and what's errors remaining
CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi
Loading product deployment information
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Building deployment
Copying setup files
Setting merged database information
Setting product information
Setting developer part information
Starting final build
Validating...
Copying files...
Updating files...
*** Error: Fatal runtime error. (Error code -10)
*** Error Details:
Access violation! Structured exception code 3221225477
*** End Error Report
*** Error: An internal tool or library returned an error. (Error code -21)
Error Messages
*** Error Details:
Error in MDF API function: _MDFBuildDist_Build
Error List
.\InputParser.cpp(819): IInstallerError 108
Problem with updating Part DataSocket64.msi.
*** End Error Report
Done building deployment -
10g XE - 404 error when I click on Home Object Browser (in IE)
Greetings
I use 10g XE with my xp/sp3 system, with IE7 (initially IE8RC1-also problematic).
The problem is that if I click on Home>Object Browser
I always get a "HTTP 404 Not Found"/The "Webpage cannot be found" error message
I've followed the instructions from htp://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABFHAEC,
I've uninstalled my antivirus (Kaspersky Internet Security 2009) and have Windows Firewall disabled
I've setup the ports needed by Oracle to my router (1521,2030,8080)
I have even started IE in safe mode(=without addons) --- iexplore -extoff
I've tried almost anything...
With other browsers (Firefox,Google Chrome, Opera)
that "Object Browser" button works ok,
BUT at other points (eg. "SQL>SQL Scripts>Create")
they all have more or less display problems (while IE shows all other things ok).
Please help :(
PS. I've read in http://kr.forums.oracle.com/forums/thread.jspa?threadID=554359
that there is a patch (#5648872) that could fix the problem,
but unfortunately http://metalink.oracle.com/ is only for Oracle's paying customers,
while I need/use Oracle 10gxe (free download) for my university lessons :( :(Yes, of course.
Here is what I get in IE now instead of a plain 404:
the first few lines:
Mon, 23 Feb 2009 23:17:20 GMT
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "FLOWS_020100.WWV_FLOW", line 11227
ORA-06512: at "FLOWS_020100.WWV_FLOW_CONDITIONS", line 392
ORA-06512: at "FLOWS_020100.WWV_FLOW_DISP_PAGE_PLUGS", line 717
ORA-06512: at "FLOWS_020100.WWV_FLOW_DISP_PAGE_PLUGS", line 309
ORA-06512: at "FLOWS_020100.WWV_FLOW", line 3098
ORA-06512: at "FLOWS_020100.WWV_FLOW", line 2422
ORA-06512: at "FLOWS_020100.WWV_FLOW", line 9357
ORA-06512: at "FLOWS_020100.F", line 236
ORA-06512: at line 30
DAD name: apex
PROCEDURE : f
+URL : [http://XDB|http://xdb/]+ HTTP Server:8080/apex/f?p=4500:1001:4320649656424332::NO:::
PARAMETERS :
+===========+
p:
+4500:1001:4320649656424332::NO:::+
the full page:
[http://pastebin.com/f39c20e60]
?:| -
Error when installation of Hyperion 11 interactive reporting web client
I can't install the web client through Hyperion workspace v11.
My steps are:
h3. Workspace --> Tool --> Install --> Interactive Reporting Web Client
Then error message is shown:
unexpected status 400 (no host matches server name XXXXXX.com) returned on XXXXXX:45000/workspace*/dataaccess/../../InsightInstaller/setup.ini access check
Please check if the server is properly configured.
After I pressed OK, another error message is shown:
unable to launch the installer. Please use the information bar (if available) to install activeX control or check if you have Admin right on this computer.
I am using IIS v5.1.
Can any friends help on this issue?
Is there anything to configure in my IIS? or the version is too old ?
Thank you ~!
Jeff T
Edited by: user8102244 on Mar 18, 2009 12:00 AMHi,
First try to go the below path and execute setup file
C:\Hyperion\products\Foundation\workspace\AppServer\InstalledApps\workspace_static\zeroadmin\component\Insight
After executing setup file try to install web clientthrough workspace. -
Geting Error when accessing Web IDE from Hana Trial.
Unhandled Error: An unexpected error in the Orion backend connection has occurred. We apologize for the inconvenience.
Unhandled Error: Request failed: Service Unavailable URI: /orion/prefs/user/watt/sap.watt.common.plugin.welcomescreen.service.Version
The Url : https://webide-p1940079822trial.dispatcher.hanatrial.ondemand.com/I was seeing the same error few hours back and then it worked. there were some updates going on.
Now i am able to access it in chrome browser. You can try it again.
Regards,
JK -
Geting error when deploy ear file on Oracle Application Server
Hi,
i m trying to deploy EAR on Oracle Application Server but i m getting ther Error
Operation failed with error: Missing class: oracle.adf.controller.v2.lifecycle.PagePhaseListener Dependent class:
any body know that what is this error
plz help me
HarishWhat version of JDeveloper are you using? And what version is your app server?
-
Error when updating through "Role import"
Hi all
I get this error when I update through Home > Authentication > SAP > Role Import:
"An error occurred while communicating with the CMS.
The following error message was returned:
Error occurred in CSAPSecHttpRolePage::OnCommitRoles. Return value = -2147213817 (0x80041e07)j Failed to commit objects to server : Duplicate object name in the same folder."
Does this mean that I have duplicate users or groups? If this is the case, how come I get the error even if I remove all roles, update, and then add a role and update again? Then everything should have been cleared?
And the funny part is that the import of users seems to work, because I can log on to the InfoView using SAP authentication... But I don't like this error, and would like to get rid of it.
Best regards,
Martin SøgaardHi Sogaard,
when you remove all roles can you verify that all the user groups and users are being removed from the system ?
after removing the roles could you also delete the entitlement system and re-create it ?
Ingo -
Error when installing Ecc5.0 and IDES Ecc5.0
Hi all,
I tried to install Ecc5.0 and IDES ECC5.0 on same server( windows 2003,and Oracle9i),but when installing ECC5.0 after successfully install IDES Ecc5.0,used following two cases, there are errors.
Case one:
install IDES and ECC on different SAP system:
step one: instlling a Non-Unicode SAP Ecc 5.0 SR1 ABAP system --> installs central instance on both systems, T13 and T14, from DVD 51031149
Step two: instlling a Non-Unicode SAP Ecc 5.0 SR1 ABAP system --> installs database instance on T13, select IDES export DVDs(DVD 51031332) during the installation process, installation successfully.
Step 3: instlling a Non-Unicode SAP Ecc 5.0 SR1 ABAP system --> installs database instance on T14, select ERP 2004 export DVDs(DVD 51031867) during the installation process, there is error when installation went to Oracle database Load with something like name alreay in the database.
Case two:install IDES and ECC on same SAP system:
Base on the above error, I tried to install ECC database instance on T13 again with diffrent Schema ID from IEDS database instance.
still there is an error like "connect with sql failed, error # 257".
Could any one help me?
I ever successfully installed ECC5.0 without IDESPls let us know that could you able to install ECC5 IDES, if yes pls give EXPORT material no.
Thanks
Vijay -
Error during installation phase when upgrading from oracle 10 to 11g
hi,
We have going to upgrade oracle 10.2.0.4 to 11.2.0.3 in SAP ECC 6.4(DB:oracle, OS:AIX6.1). By mistake I run RUNINSTALLER from wrong path oracle/stage/11203 <dump folder>/database instead of SAP folder.it gives some error message during installation but i continue to installation and installation is completed.
now i worried about error and and wrong path selection, i removed manually new oracle home folder 112_64 and continue to new installation from proper path but now i am getting below error when running RUNINSTALLER from SAP folder
"[INS-10008] Session Initialization failed".and log are as
ERROR) - Oracle Database software installation finished with errors.
. The Oracle executable <OH>/bin/oracle is empty or does not exist.
. Possible cause(s): link error, installation was cancelled or interrupted, or fatal error.
. (INFO) - Fatal error occurred during installationHi Pawan
Could you refer the SAP Note for Oracle Installation error
1431796 - Oracle 11.2.0: Troubleshooting the Software Installation
BR
SS -
On my Mac, after the installation i get this error when i start - "Premiere Elements 13.0 has encountered an error. [/Adobe/pre/main/MediaCore/ASL/Foundation/Make/Mac/../../Src/DirectoryRegistry.cpp-283]"
any ideas how to fix this, i don't know or haven't faound out how to contact Adobe supporet....Here's the contact link for Adobe support. It's just three clicks from the site's home page.
Contact Customer Care -
Hello,
I've got following error when do installation. I checked and libexpat.so.0 is exists in /home/oracle/oracle/product/2.0.1.2.0/beehive_4/lib and the path is on LD_LIBRARY_PATH
IMPORTANT NOTE: Now going to 'use XML::Parser' module which is a wrapper built around a perl binding to Expat XML Stream parser implemented in the 'XML::Parser::Expat' module. This module requires the 'libexpat.so.0' shared object. If you encounter a failure because libexpat.so.0 cannot be found then please re-try after prefixing '/home/oracle/oracle/product/2.0.1.2.0/beehive_4/lib' to the 'LD_LIBRARY_PATH' environment variable.
Please advice me.
ThanksDid you use http://labs.adobe.com/downloads/acrobatcleaner.html ? That should clean up everything related to Adobe Reader.
Then download the installer from http://get.adobe.com/reader/enterprise/ -
DNS error when launching Application login page after R12 installation
Hi ,
I installed R12.0.4 on windows server 2003.
After installation when I launch the home page, its giving dns error saying that <domainname>.<hostname> cannot be loaded.
I checked the apache alert log, it is trying to access an IP that is commented out in the host file. I am not sure where it is picking it up from. I installed loopback adapter before the installation and the entries in the host file also seem fine. Please help me out, this is the 2nd installation but the issue is still not resolved. Please let me know if you need anymore details.
Thanks !Hi Dharmshila,
Since you were not able to access the application URL using the IP Address then I believe it is an issue with the application/database services. To verify that all application services are up and running properly, please do the following:
- Open a new DOS session
- cd %INST_TOP%\apps\<SID>_<hostname>\admin\scripts
- Issue "adopmnctl.sh status"
- You should get something similar to the following:
Checking status of OPMN managed processes...
Processes in Instance: PROD_db2.db2.domain.com
-------------------+--------------------+---------+---------
ias-component | process-type | pid | status
-------------------+--------------------+---------+---------
OC4J | oafm | 3800 | Alive
OC4J | forms | 2528 | Alive
OC4J | oacore | 3112 | Alive
HTTP_Server | HTTP_Server | 172 | Alive
exiting with status 0
ERRORCODE = 0 ERRORCODE_ENDRegards,
Hussein -
I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie. -
SQL serever 2012 Setup has encountered an error when running a windows installer file
I am trying to install SQL server 2012 Express on a windows 7 PC for 2 days now. I feel like banging my head against the wall.
I keep getting the following errors here's the full log
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer
to Help and Support for more information. HRESULT: 0x8007054F. Windows Installer file: C:\Users\Receno\AppData\Local\Temp\SQL Server 2012\Setup\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20150109_213740\SqlSupport_Cpu64_1_ComponentUpdate_1.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325hmmm..so which hotfix do I apply ?
SQL Server 2012
All (Global) x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
Maybe you are looking for
-
Microsoft is Office Home and Student 2010-Windows used with macbook pro
can home and student 2010 be used with my macbook pro?
-
Single Sing On in PI 7.0
Dear All, Could you please provide me help on this,how to create SSO in PI 7.0.? Thanks & Regards, Venkat.
-
hi.. i have a requirement that i have to save the entries in selection screen to the db. if i click save button it is asking for variants. suggest me.. reply asap.. thanks in advance...
-
How to know wifi hotspot status?
how can we detect the hotspot network when it is turned on. in windows phone 8.1 programmatically? Please help me out ?
-
BEEPS - How do I get these random beeps to stop?
My MacBook has been beeping at me for about 2 weeks. There are low pitched beeps every minute or every few minutes, sometimes just one short beep, and sometimes a longer beep (1-2 seconds). My volume is muted. I have software version 10.4.11 installe