GetProperties() method missing from File Control

Where is the getProperties() method on the File Control? I see all the other methods
of the FileControl interface, but getProperties() is missing????

That class is not in that package, but another package imported in the sample, and in a different jar file. The readme file should reference a deployment guide listing the required jar files, which I've copied here: <a href="http://support.businessobjects.com/communityCS/TechnicalPapers/cr_xi_r2_jrc_deployment.pdf" target="_blank">http://support.businessobjects.com/communityCS/TechnicalPapers/cr_xi_r2_jrc_deployment.pdf</a>Sincerely,Ted Ueda

Similar Messages

HT4623 SOMEHOW the icon for rotation lock is missing from the control bar. I tried to reset but my passcode doesn't work. First, how do I find my passcode? Then, if I reset, will it return the rotation lock to the control bar?

I don't know how it happened why, but the icon for rotation lock is missing from the control bar. Second problem, the passcode for my iPad isn't working. I wrote it down, so not sure what the problem is. HELP

If the setting for the rotation lock is missing it is because you are using the side switch to control the rotation in Settings>General>Use Side Switch to>Lock Rotation. The software switch in the control center should be for Muting system sounds.
you have to restore the iPad in orde to unlock it now.
iOS: Forgotten passcode or device disabled after entering wrong ...
If you are sure that you are entering the correct passcode, reboot the iPad and then try again and see if it is accepted.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

ParameterFieldController class and getDataDefController() method missing from com.crystaldecisions.reports.sdk.*

I am trying to use the desktop samples for the JRC. The parameter setting sample will not compile because the ParameterFieldController class and the ReportClientDocument's getDataDefController() method are missing from com.crystaldecisions.reports.sdk.* .
I have release 2 of Crystal Reports XI Developer and should have the most up to date jrcerom.jar file for that product. What is it going to take to get this working? This is a critical aspect of using Crystal Reports for our java application reporting needs.
Prompt attention to this is appreciated.

 That class is not in that package, but another package imported in the sample, and in a different jar file. The readme file should reference a deployment guide listing the required jar files, which I've copied here: <a href="http://support.businessobjects.com/communityCS/TechnicalPapers/cr_xi_r2_jrc_deployment.pdf" target="_blank">http://support.businessobjects.com/communityCS/TechnicalPapers/cr_xi_r2_jrc_deployment.pdf</a>Sincerely,Ted Ueda

Windows 7 on Mac book pro photos missing from files Does it happen often?

Photos keep disappearing from files when saved from the net using Windows 7 .Has this happened to anyone else?
Thanks
John

Just how are you Copying and Pasting?
Do this.
Open Windows Explorer, or Computer, and make sure the Folder Pane is showing. Click on Computer, Not Libraries or you Usename, and Browse to the folder the images are stored in, whcih may be in your Username folder under Users of the C:\ drive.
Once you have that folder open in the Left Hand Pane Select the images you want to copy, you can do that by selecting the first image in the folder then hold down the Shift key and select the Last image you want to copy and all images in between the first and the last will be selected. If you want to select only a few images and they are not all in a row then click on the first and then hold down the Ctrl key and click on each image you want to copy, that skips the images in between the ones you want to select.
Once you have all the ones you want to copy selected, whether all or skipping some, Press and hold the Ctrl (Control) key (On the Mac keyboard it may be a different key. My Mac is off right now and I'm on my windows desktop so I can't check) and Press the C key (No Caps, just c). Then Browse to the External drive and select the folder you want to paste them to and Press/Hold Ctrl and then the V key (again no Caps just v). You should see the copy dialog window open and the images should start copying to the external. Do it this way I bet you get NO errors.
If you do get any errors, other then a file of the same name being in that folder, then what you have done is Saved Internet Shortcuts, Links, of those images and not the image files them selves. To really save an image from a web page you must Right mouse click on the image and from the dialog that comes select Save Image As. Otherwise it is going to save the Internet address of the image and not the real image.

Photomerge command has gone missing from File Automate - menu

Was using Photomerge command successfully in PS and at some point later PS crashed and locked my Mac. I restarted and now the Photomerge command is missing from the File Menu. I asked Adobe support for help, they had me reinstall latest PS but it's still not there.
Is there anywhere in the PS Folders I can check for a file associated with this command (like there are for Scripts for example) and could possibly replace?
I also tried initiating the command from Lightroom with a set of images selected and using the relevant contextual menu and it produces an error saying Photoshop could not be launched (it is launch though).

Hi and thank you. Yes Photomerge.jsx is there in the scripts folder. Although when I go to launch other scripts from within PS using the File> Scripts… menu I get the following error:
Could not complete the Image Processor command because Photoshop was unable to find the JavaScript plug-in
How can I get it?

Stupid question - method missing from Socket class

I'm sure I am just missing something here. I am using getInputStream from Socket class successfully - now want to add setKeepAlive method - I am getting an error:
Method setKeepAlive(boolean) not found in class java.net.Socket.
client.setKeepAlive(true);
client is defined as a Socket
Socket client = origSocket.accept();
What am I screwing up here?? I know the classpath is correct since I am and have been using getInputStream with this socket for months!!
Thanks for any responses!
Beth

javac is the compiler, not the run-time. That would have nothing to do with what the classpath is at run-time, which would either be the system environment variable CLASSPATH, or the -cp command-line parameter to java, not javac.

Package missing from file menu in CS6 - how to get this feature?

Hi,
I'm running Illustrator CS6 (version 16.0.3) 64-bit on Windows 7 64-bit as part of my Design Standard CS6. I'm trying to package a file but when I go to the File menu, there is no package option. Why is it not there? And how do I get the Package feature?
Mark

I'm missing the "Package" feature in Illustrator CS6
http://forums.adobe.com/message/5449455

Both "Save As..." and Duplicate are missing from file menu

Just upgraded and am running OS X 10.8.2 and Keynote 5.3... The file menu has only Close, Save, Revert to Saved, Export in that section. Pressing the option key doesn't change duplicate to Save As... since Duplicate is missing as well. When I press shift-command-S i get an error sound and option-shift-command-S does nothing... Every other mac app is working fine. Obviously, I need some help.

Thanks for the response. I got a fix for it. Went to another account on the mac and keynote had the proper file menu options listed. Under library/Preferences I trashed all the iWork related plist and the Cache file--Rebooted and all was back in order. Wish I could say I figured this out all by myself, but Apple support walked me through it. FYI if you run across anyone else with this type of issue.

Plug-in import missing from File, Import...

I'm an Eclipse (and Java) newbie. I'm trying to follow the tutorial, "Create a Hello World SWT application" available on the Welcome, Tutorials, page. However, step 3, "Import the SWT project" says:
Open the Import wizard from the main menu via File > Import..., and select Plug-in Development > Plug-ins and Fragments. Click Next.
There is no Plug-in Development > Plug-ins and Fragments on the wizard. I'm running Eclipse Luna, 4.4.2.
Is the tutorial out of date? How do I import a plug-in?
Phil

Phil,
The Java package doesn't include PDE. You use use Help -> Installer New
Software, pointing to the release train update site (Luna in your case)
to add it to whatever installation your using.
On 01/04/2015 10:56 PM, phil allred wrote:
> I'm an Eclipse (and Java) newbie. I'm trying to follow the tutorial,
> "Create a Hello World SWT application" available on the Welcome,
> Tutorials, page. However, step 3, "Import the SWT project" says:
>
> Open the Import wizard from the main menu via File > Import..., and
> select Plug-in Development > Plug-ins and Fragments. Click Next.
>
> There is no Plug-in Development > Plug-ins and Fragments on the
> wizard. I'm running Eclipse Luna, 4.4.2.
> Is the tutorial out of date? How do I import a plug-in?
>
> Phil

How to call a method written in user control (ascx file) from javascript

Hi to All,
I have one scenario where I need to call a method written in user control (.ascx.cs file) from javascript (ascx file). I tried below code but it is not working, I found later it works only for aspx or asmx file , is it true ??
Code:
$.ajax({
type: "POST",
url: "ViewSearch/SetServerSessionText",
data: "{'name':'" + searchText + "'}",
contentType: "application/json; charset=utf-8",
dataType: "json",
error: function () {
alert("error");
Can anyone please tell me how to call ascx.cs code from javascript ??
Thanks in Advance !!!

yes that is true, ajax calls can only be made to an endpoint like aspx pages/web service, basically anything that can return a http response etc. User Control can be embedded inside of aspx pages.

The package file is missing from the project directory

Today after working in SSIS all day with no problems, I re-opened one of my projects and got the message:
The package file ‘package_name.dtsx’ is missing from the project directory. This package has been skipped, and project will continue to load.
So two of my packages loaded and all remaining packages where skipped, one pop-up dialog for each “missing” package. I then looked in my project directory and all my packages are still there.
1. Has anyone experienced this and found why this happens?
2. Can I just import my packages again and be good to go?
Update:
I discovered that this had to do with renaming my packages in SSDT. For some reason the name changes did not get saved into the project .dtproj file. I was able to correct by renaming the .dtsx files in the project directory to their original name. Then
I re-opened the project, renamed the packages to the new names, saved and closed all packages. At this point you need to save the project, which actually wasn't really straight forward. You need to highlight the project name in Solution Explorer
and then from the File menu select 'Save Selected Items'. This updates the .dtproj file.
Upon closing SSDT, a dialog SOMETIMES appears asking you to save the project, after selecting Yes, the .dtproj file also updates. However, I've realized that upon closing the project, that the dialog asking to save the project does not always appear,
depending on what has changed in the project. To be safe, use method previously described, especially after renaming packages. Also, if SSDT happens to crash after you have renamed a package, the project will not re-open properly.

I remember one such occurrence when I used Source Control (if I recall right it was TFS), and yes, you can simply right-click on the packages folder and choose 'add existing package'.
But check for project file perhaps it has a wrong reference. E.g. something from the outside manipulated on the package files.
Arthur
MyBlog
Twitter

Restore - filename for datafile is missing in the control file

I am practicing RMAN recovery procedures and I encountered a problem that I do not know how to solve.
1) I took a hot backup of my test database.
2) Create tablespace TS_DATA_TEMP
3) Deleted tablespace TS_DATA which had 2 datafiles
4) Created tablespace TS_DATA with 1 datafile
5) shutdown database
6) logged into RMAN in nomount
7) restore controlfile from autobackup;
8) alter database mount;
9) restore database;
RMAN> restore database;
Starting restore at 22-AUG-08
using channel ORA_DISK_1
the filename for datafile 5 is missing in the control file
skipping datafile 1; already restored to file /u02/oradata/EDM91/system01.dbf
skipping datafile 2; already restored to file /u02/oradata/EDM91/undotbs01.dbf
skipping datafile 6; already restored to file /u02/oradata/EDM91/index
skipping datafile 3; already restored to file /u02/oradata/EDM91/sysaux01.dbf
skipping datafile 7; already restored to file /u03/oradata/EDM91/TS_INDEX01.dbf
skipping datafile 9; already restored to file /u03/oradata/EDM91/TS_LOB01.dbf
skipping datafile 4; already restored to file /u02/oradata/EDM91/users01.dbf
restore not done; all files readonly, offline, or already restored
Finished restore at 22-AUG-08
10) tried to recover
Starting recover at 22-AUG-08
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/22/2008 15:04:22
RMAN-06094: datafile 5 must be restored
SQL> select name from v$datafile where file#=5;
NAME
/u04/oradata/EDM91/TS_DATA.dbf
12) alter database backup controlfile to trace
DATAFILE
'/u02/oradata/EDM91/system01.dbf',
'/u02/oradata/EDM91/undotbs01.dbf',
'/u02/oradata/EDM91/sysaux01.dbf',
'/u02/oradata/EDM91/users01.dbf',
'/u04/oradata/EDM91/TS_DATA.dbf',
'/u02/oradata/EDM91/index',
'/u03/oradata/EDM91/TS_INDEX01.dbf',
'/u04/oradata/EDM91/TS_DATA02.dbf',
'/u03/oradata/EDM91/TS_LOB01.dbf'
CHARACTER SET UTF8
So i'm not sure what the problem is. Datafile TS_DATA.dbf is located in the control file but i'm getting the error: the filename for datafile 5 is missing in the control file.
Suggestions on what's wrong with the control file?

I found my mistake; a newbie error.
I did not know I needed to include in my restore command the 'until' option when doing incomplete recovery. I only included the 'until' option in the recover command:
original command
restore database;
recover database until sequence =123;
should be
restore database until sequence = 123;
recover database until sequence =123;
I usually run the command using a RUN block with a SET UNTIL SEQUENCE but this case I used the single commands separately.
RUN
+{+
SET UNTIL sequence 123;
RESTORE DATABASE;
RECOVER DATABASE;
+}+

ORA-01173: data dictionary indicates missing data file from system tablespa

Hello
My Database is 11gR1 and Linux is the OS. Thought of posting it as a new thread as things have changed a lot.
2 of my database file were lost due to hardware failure. (the datafile do not belong to SYSTEM TABLESPACE) and and the second was datafile for undo tablespace.
I created control files with command not mentioning the lost datafiles:
CREATE CONTROLFILE REUSE DATABASE "BSSGLB" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 32
MAXLOGMEMBERS 5
MAXDATAFILES 600
MAXINSTANCES 10
MAXLOGHISTORY 1168
LOGFILE
GROUP 1 '/DB/app/oracle/oradata/bssglb/redo01.log' SIZE 500M,
GROUP 2 '/DB/app/oracle/oradata/bssglb/redo02.log' SIZE 500M,
GROUP 3 '/DB/app/oracle/oradata/bssglb/redo03.log' SIZE 500M
-- STANDBY LOGFILE
DATAFILE
'/DB/app/oracle/oradata/bssglb/system01.dbf',
'/DB/app/oracle/oradata/bssglb/sysaux01.dbf',
'/DB/app/oracle/oradata/bssglb/users01.dbf',
'/DB/app/oracle/oradata/bssglb/bss01.dbf',
'/var/oracle/oradata/bssglb/bss02',
'/var/oracle/oradata/bssglb/system02.dbf'
CHARACTER SET US7ASCII
I have all the files mentioned in the datafile section of the above command.
But somehow when i try to open the DB, first it asks for the media recover. When i recover database then it disconnects database saying:
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
Process ID: 4768
Session ID: 170 Serial number: 5
Contents of the alert log file are:
Beginning crash recovery of 1 threads
parallel recovery started with 3 processes
Started redo scan
Completed redo scan
1 redo blocks read, 0 data blocks need recovery
Started redo application at
Thread 1: logseq 7, block 2, scn 20356182450
Recovery of Online Redo Log: Thread 1 Group 1 Seq 7 Reading mem 0
Mem# 0: /DB/app/oracle/oradata/bssglb/redo01.log
Completed redo application
Completed crash recovery at
Thread 1: logseq 7, block 3, scn 20356202453
0 data blocks read, 0 data blocks written, 1 redo blocks read
Sun Feb 20 08:16:23 2011
Thread 1 advanced to log sequence 8
Thread 1 opened at log sequence 8
Current log# 2 seq# 8 mem# 0: /DB/app/oracle/oradata/bssglb/redo02.log
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Sun Feb 20 08:16:23 2011
SMON: enabling cache recovery
Errors in file /Oracle/app/oracle/diag/rdbms/bssglb/bssglb/trace/bssglb_ora_4550.trc:
ORA-01173: data dictionary indicates missing data file from system tablespace
Error 1173 happened during db open, shutting down database
USER (ospid: 4550): terminating the instance due to error 1173
Sun Feb 20 08:16:25 2011
Instance terminated by USER, pid = 4550
ORA-1092 signalled during: alter database open...
ORA-1092 : opiodr aborting process unknown ospid (4550_182910338848)
Sun Feb 20 08:16:26 2011
ORA-1092 : opitsk aborting process
Guys please help me out of this situation.
Regards, Imran

STOP opening new threads for ongoing solution to SAME problem
Re: I have copy of data files! How to install and add these files to database!
Re: Failure of network storage!
Re: I have copy of data files! How to install and add these files to database!
Handle:      misterimran
Email:      misterimran
Status Level:      Newbie
Registered:      Jan 15, 2002
Total Posts:      1,109
Total Questions:      130 (115 unresolved)
so many questions & so few answers!
Edited by: sb92075 on Feb 19, 2011 7:49 PM

Control File Missing Temp file

Dear All,
I have a problem with my database and receiving errors related to Temp file. I run the following command and got output as:
*select status,name from v$tempfile;*
*Output:*
STATUS NAME
ONLINE 'X:\ORACLE\ORADATA\PROD\TMPPROD02.DBF'
ONLINE 'X:\ORACLE\ORADATA\PROD\TMPPROD03.DBF' I run ALTER DATABASE BACKUP CONTROLFILE TO TRACE; command it generated following output:
I think control file is missing temp file information. Can any one help please?
#     Set #2. RESETLOGS case
# The following commands will create a new control file and use it
# to open the database.
# The contents of online logs will be lost and all backups will
# be invalidated. Use this only if online logs are damaged.
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "PRODUC" RESETLOGS ARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
    MAXLOGFILES 32
    MAXLOGMEMBERS 2
    MAXDATAFILES 32
    MAXINSTANCES 16
    MAXLOGHISTORY 7917
LOGFILE
GROUP 3 'X:\ORACLE\ORADATA\PRODUC\LOGPROD3A.RDO' SIZE 10M,
GROUP 4 'X:\ORACLE\ORADATA\PRODUC\LOGPROD4A.RDO' SIZE 10M,
GROUP 5 'X:\ORACLE\ORADATA\PRODUC\LOGPROD5A.RDO' SIZE 10M
-- STANDBY LOGFILE
DATAFILE
'X:\ORACLE\ORADATA\PRODUC\SYSPROD01.DBF',
'X:\ORACLE\ORADATA\PRODUC\UNDOPROD01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODCFD01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODCFI01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODPD01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODPI01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODCRD01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODCRI01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODPHD01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODPHL01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODPHI01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODFPD01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODSD01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODAD01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PROD_MON01.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODREPORTINGDATA01',
'X:\ORACLE\ORADATA\PRODUC\PRODREPORTINGINDX01',
'X:\ORACLE\ORADATA\PRODUC\PRODCFD02.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODPHL02.DBF',
'C:\ORACLE\ORA92\DATABASE\FSDFSDFSDFS',
'X:\ORACLE\ORADATA\PRODUC\PRODREPORTINGDATA02',
'X:\ORACLE\ORADATA\PRODUC\PRODAD02.DBF',
'X:\ORACLE\ORADATA\PRODUC\PRODCFD03.DBF',
'X:\ORACLE\ORADATA\PRODUC\UNDOPROD02.DBF'
CHARACTER SET AL32UTF8
# Recovery is required if any of the datafiles are restored backups,
# or if the last shutdown was not normal or immediate.
RECOVER DATABASE USING BACKUP CONTROLFILE
# Database can now be opened zeroing the online logs.
ALTER DATABASE OPEN RESETLOGS;
# Commands to add tempfiles to temporary tablespaces.
# Online tempfiles have complete space information.
# Other tempfiles may require adjustment.
ALTER TABLESPACE TEMP ADD TEMPFILE 'X:\ORACLE\ORADATA\PRODUC\TMPPROD03.DBF'
     SIZE 1024M REUSE AUTOEXTEND ON NEXT 134217728 MAXSIZE 16383M;
ALTER TABLESPACE TEMP ADD TEMPFILE 'X:\ORACLE\ORADATA\PRODUC\TMPPROD02.DBF'
     SIZE 8192M REUSE AUTOEXTEND ON NEXT 33554432 MAXSIZE 16383M;
# End of tempfile additions.

Please either add a tempfile or else if you have two temporary tablespaces(say temp01 & temp02) with associated tempfiles and let us assume TEMP01 is the default tablespace for the database(by seeing the database_properties view) then please drop the TEMP02 tablespace and re-create it and then make TEMP02 as default tablespace for the database and then drop the TEMP01 tablespace and re-create it and then make it as the default temporary tablespace .. Thats the solution and hope its clear... you can go through following steps :
SQL> select tablespace_name, file_name from dba_temp_files;
SQL> drop tablespace temp02 including contents and datafiles;
SQL> create temporary tablespace temp02 tempfile ''X:\ORACLE\ORADATA\PROD\temp02.tmp' size 16383M;
SQL> alter database default temporary tablespace TEMP02;
SQL> drop tablespace temp01 including contents and datafiles;
SQL> create temporary tablespace temp01 tempfile ''X:\ORACLE\ORADATA\PROD\temp01.tmp' size 16383M;
SQL> alter database default temporary tablespace TEMP01;
Cheers!

Method or property to remove decorations from a control

Hi folk,
by program, I would like to remove (to make transparent) some decorations of a control (the 3d border of an Intensity Graph) before to save it on a png/jpg file.
Do you know how to perform that task by method or property?
Regard,
Asper

Dear Ben,
thanks for your workaround suggestion.
I already use the Get Image node, but I believe that this is not the right way. I would like to preserve all features like scales, scale labels etc. and strip out only the 3d border and other decorations.
"slice and dice" the image is not possible because it would cut parts of scales. Now I am using the "Create Mask.vi" to delete the color that is associated with the border. This approach works not very well too.
The 3d border has a color gradient and it is necessary to delete all colors associated to the 3d border gradient.
Further the 3d border changes size and number of gradient colors with the zooming of the windows. Not last, the size of plot area changes with variation of the minimum and maximum of scale limits.
Programmaticly is not so clear which points should be selected to detect the colors to mask.
Any method or property to remove decorations from a control?
Asper

GetProperties() method missing from File Control

Similar Messages

Maybe you are looking for