Gets a created but not inserted row passivated?

Hi,
I'm facing a problem concerning that a VO looses its created but not inserted row after passivateState --> activateState.
The result is that the VO has another row a current row after activateState.
Any comments?
Is there a solution? Implement passivateState() and activateState() for that VO Class?
Configuation problem?
Thanks,
Markus

Hi Steve,
sorry, I tried, but I can' t reproduce the problem with a sample application. This means that a created (yes, build-in operation) but not inserted row gets passivated and activated!
There is something fishy with my application because I can't set the state token validation to false. When it is set to false than the new row don't get passivated and activated. :-(
Thanks,
Markus

Similar Messages

  • I am trying to create my Apple ID, but not receiving the verification link from Apple,. I get the email but NOT the link,. any suggestions

    I am trying to create my Apple ID, but not receiving the verification link from Apple,. I get the email but NOT the link,. I have triple checked my email address and all Apple account info, all of which are correct. Any suggestions?

    Where are you trying to create it?
    Go to appleid.apple.com and create it there.   Type the country name in the space and a dropdown should appear. Nigeria is clearly available there.

  • Step progression not inserting row in Jobdata panel

    I am trying to research step progression in Peoplesoft 9 & did all the setup.I can see the employee in review wage progression page with Approved status.As the final step, i ran HR_WP_ADV App Engine. .But is not inserting row into jobdata & giving error "Cannot Job data CI for employee 'emplid' ".
    Any help please!!
    Thanks

    Thanks for the reply.
    The Project was in version 11.1.3 before I migrated. I had the issue above so I migrated to 11.1.1.4 then to 11.1.1.5 then to the New GREAT 11.1.2 to go by the matrix of support The issue is still there.
    Basic Page layout:
    SEARCH-MASTER-PANELTABBED LAYOUT (Hold all the CHILDREN RECORDS)
    PANEL TAB is made of ; SHOW DETAIL ITEM- PANEL COLLECTION- TABLE.
    the panel collection has a toolbar with 2 buttons in it.
    My issue varies:
    Hit create insert==> record count goes up one but the table does not render (it goes all blank even if records existed in it)
    Hit undo budo ==>table still not rendering. (click next on master record then click previous to come back, the table renders correctly.)
    other tables do the following:
    Hit Create insert == > table shows normally and I can enter new record.
    Hit undo ==> table count goes down but table does not render at all anymore.
    for this issue i noticed if i set cache results to false the table works after hitting undo
    IF I CREATE A NEW SHOW DETAIL ITEM and put exactly what the other tabs have in them and use the same layouts and buttons the new table works great!!!!!!!!!!!!???????????????????? WTF?!?!?!?!
    NO ERROR MESSAGES even at finest level are thrown.
    I HAD NO ISSUES IN THE PREVIOUS VERSIONS OF JDEV IS THIS A JSF 2.0 BUG????
    BY THE WAY JDEV 11.1.2 sometimes CRASHES or Hangs when viewing the Binding of Page when you click on Binding straight from the Design view. I have to open the Binding Page separate to view it. FYI
    Edited by: Nottallah on Jul 11, 2011 9:48 AM
    Edited by: Nottallah on Jul 11, 2011 9:51 AM

  • Netweaver Error in Logs - JRA - Could Not Insert Row To ResultSet

    Hi there
    we have an MII 12.1.5 instance (with Patch) installed on a Netweaver platform (SP 3).  We're using the JRA action blocks to call an RFC (we populate the request doc with multiple nodes first) and they're all executing completely without any problems at face value.  When I look at the Netweaver logs (MII filter on), I'm getting quite a few entries per transaction run which hold the following Error Messages:
    Message:
    Could Not Insert Row To ResultSet
    Category:
    /Applications/XMII/Xacute
    or
    com.sap.xmii.storage.connections.JRAUtil
    Location:
    com.sap.xmii.storage.connections.JRAUtil
    Application:
    sap.com/xappsxmiiear
    Has anyone seen these errors or know what could be causing them?
    Thanks,
    Lawrence

    Hi.
    This is a known issue and have been there in some versions, the JRA action block seems to be working (but causes this problem in the Netweaver log) and the JCO action block do not have this problem.
    I have just reported as an OSS to SAP.
    BR
    Poul.
    Edited by: Poul Klemmensen on Apr 12, 2010 4:57 PM

  • How do I import a playlist on home sharing?  I get the songs, but not packaged in the playlist from which it was imported.

    How do I import a playlist on home sharing?  I get the songs, but not packaged in the playlist from which they were imported. Now I have duplicate songs in my music library.

    You can't import media from one Home Sharing library to another by any other means except selecting the individual items you want to import. For example, you can't select a playlist and then click on the 'Import' button to import all the items in that playlist. You have to select all the items in the playlist before you can click on the 'Import' button. By extension, the playlist on the other Home Sharing computer will not be re-created on your computer. You can select more than one item using the 'Shift' or 'Command' keys.
    What you can do is create a playlist on your computer first, with the same name if you want, and then use drag and drop to copy the media from the remote playlist to your playlist. Note that the playlist on your computer cannot be a 'Smart' playlist it must be a regular playlist for drag and drop copying to work.
    Regarding 'Smart' playlists. If you create a 'Smart' playlist on your computer that uses the exact same filtres as the ones on the remote library when you import the media from the remote library they will show up in the same 'Smart' playlist on your computer.

  • Environment creating But Not Connecting  Oracle through  OCCI

    hi Guys,
    Environment creating But Not Connecting Oracle through OCCI in VC++2005 .NET ..... ,Oracle 10G ,
    But Same Code is Working VC++2003 .....
    giving the Following Error......
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information.
    I try to download INSTANTCLIENT new one for VC++2005 that One is Not down loading... therefore the same down instantclient is copied in VC++2005...
    http://www.oracle.com/technology/tech/oci/occi/occidownloads.html
    I downloaded abobe URL for VC++8 and copied into that INSTANT client.....
    But still not connecting.....somebody who has done in VC++2005 connection through OCCI... help me step by step Plzzzzzzzzz....
    friends can anybody tell how to connect OCCI .....
    advance thanx ......
    yours LUV

    Hi guys,
    I have the same problem. I've tried using the supplied demo in instantclient sdk but I keep getting this SQLException without a message.
    Any help is welcomed.
    Cheers,
    Sorin

  • How could i get other themes  but not in keynote, How could i get other themes  but not in keynote

    How could i get other themes  but not in keynote???!!!

    Create them yourself, specific, simple, easy and free.

  • Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud,

    Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud, is that possible from LR5 to LR6? Thanks so much.

    Welcome to Apple Discussions!
    You can't install 9.2.1 or earlier on any Mac that is only Mac OS X bootable. In fact you need to use the restore disks which came with those Macs to install 9.2.2 on those Macs. 8.6 is only possible to install on Macs which came with 8.6 or earlier. The 9.1 disk may be useful for your 1999 PowerMac G4, but won't be of any use for a 2006 Powerbook G4.
    Adobe Pagemill does not follow w3.org web publishing standards. If you want a webpage editor, get http://www.barebones.com/ BBEdit
    MS Office, there is a free Mac OS X alternative in http://www.neooffice.org/
    Or you can upgrade to the full Office 2004 for the Mac, or get http://www.thinkfree.com/ or Open OS X Office.
    Wordperfect files can be converted to Word files with http://www.dataviz.com/ 's Maclinkplus.
    Microsoft no longer has Internet Explorer for download (that quit being offered January 2006), though that is covered more in my FAQ:
    http://www.macmaps.com/browser.html
    As for other Mac OS X inquiries, I strongly recommend seeing my other FAQ:
    http://www.macmaps.com/macosxnative.html
    which should answer most of your other questions. If you have further questions, please feel free to ask me.
    Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

  • Form created but not visible!!

    Form created but not visible!!
    Hi everyBody,
    I've created 2 user Forms binded with a 2 user tables (with diffrent UDOs)  and  everything works perfectly. When I tried to run it on a machine at a customer, the first form functions perfectly and the second one is created but does not appear!!!,
    I am lost!!
    Is there a problem of SQL  Server 2005?!
    Is it because of the nature of the machine (server or client machine)?
    Is there a problem of configuration (Operating System)?  I'm using Windows XP but the other machine is using Windows 2000.
    would somebody have an idea or suggestion?
    Thank you in advance

    HI Haifa,
    When the second form opens (but doesn't appear on screen) choose Windows--Cascade from the top menu. Sometimes a form will open outside the viewable area in the SBO client so choosing this menu option will reset it.
    Kind Regards,
    Owen

  • Spool Error - Spool created but not opening/displaying. Message no SP01R042

    Dear All,
    In the ECC Production System, for SD documents Spool is  created but not opening/displaying.
    Message no SP01R042
    When we check the short dump for the user,
    The dump is -
    - POSTING_ILLEGAL_STATEMENT
    - Statement "CALL SCREEN" is not allowed in this form.
    Please help. Perfect answers will be definitely rewarded.
    Thanks & Regards,
    Sameer

    Hi Sri,
    Try to setup the printer at OS LEVEL.
    then,
    If on Windows---use method C.
    if not,
    use method U and map to your printer queue at OS level.
    Hope this resloves this issue.
    Reward Pts if useful
    Regards,
    Malti

  • Master idoc is created but not communication idoc

    Hi Experts,
    Thrugh the change pointers i m sending the customer  master data through idocs ,
    there master idoc  is creating but not the communication idocs .
    it is not triggering the function module MASTER_IDOC_DISTRIBUTE.
    How to rectify this ,, please anybody asap..
    Regards

    Initially, check the Partner profiles(Sending and Receiving), port definitions and Distribution model(where the model view should be distributed).
    Check out for any filters added, enable change pointer also.
    Cheers..
    Santosh.
    <i><b>Reward Points for all Usefull Answers.</b></i>

  • HT1349 Why doesn't the video open on the iTunes turorials? I get the voice, but not the video.

    I open iTunes tutorials but the video doesn't open. I get the voice, but not the video.

    HP, eh? Me too. I wonder if everyone having this sort of problem is running a new HP Vista machine?
    This has been going on for some time. Why don't you see this thread
    http://discussions.apple.com/thread.jspa?threadID=950652&tstart=0
    and post your machine info there? Maybe if enough people with this problem post their machine info it could help lead to a solution.
    HP Pavilion Entertainment PC   Other OS   Vista

  • I added a new email to my iPad , i am getting the emails, but not able to send , i keep getting a message that i am not connected to the server?

    i added a new email address to my iPad, i am getting the mail but not being allowed to send , i keep getting a message that i am not connected to the server

    Jo Elyn
    Your question has ended up in a relatively low traffic forum, Using ASC (How to use this website). I have asked our gracous Hosts to move it to Using iPad where it may get a more rapid and targeted response
    best luck
    ÇÇÇ

  • Query the new inserted but not committed row join with db

    Hi,
    I have one vo based on two EOs, one is for update and another is for reference. When inserting a new row, is there any way I can retrieve the data from the reference EM based on the join condition for the new inserted row from the reference EO. If the inserted row is committed, it is not an issue. Before the commit, the join is between the memory and db. I tried to set the VO query mode to
    ViewObject.QUERY_MODE_SCAN_ENTITY_ROWS|ViewObject.QUERY_MODE_SCAN_UNPOSTED_ENTITY_ROW, it does not get the column values from the reference EO.
    If I use sql, I insert row in one table, then join query this table and another table, within the same transaction, I can get the new row joining with other table rows before committing the trans.
    Thx
    Hu

    I think you don't need to change the query execution mode
    check [url http://blogs.oracle.com/shay/entry/whenvalidateitem_trigger_in_ad]When-Validate-Item trigger in ADF with PPR 

  • I create shortcut for user to get a cr but not working

    1. added report to Customer service folder
    2. created shortcut in closure group, which is attached to Customer service.
    the new report is not appearing when I login as that user. why? I can see the report shortcut when viewing in CMC but not when actual  logging in.

    Please allow me to re-phrase your question,
    1. Created a Report in Folder X
    2. Created a shortcut for the above report and placed in Folder Y
    User in Group A can view the report in Folder X but can't see the the shortcut in Folder Y, is that right?
    Or
    User in Group A can view the shortcut in Folder Y from CMC but not from BI Launchpad?

Maybe you are looking for