GETSQL2008DBFilesFreeSpace forced to terminate because it ran past the configured timeout 300 seconds
We have a SQL cluster that is consistantly reporting the following error:
Forced to terminate the following process started at
<Time> because it ran past the configured timeout 300
seconds.
Command executed: "C:\Windows\system32\cscript.exe" /nologo
"GetSQL2008DBFilesFreeSpace.vbs" "<Cluster Name>" "<ClusterFQDN>"
"MSSQLSERVER"
Working Directory: C:\Program Files\System Center Operations
Manager\Agent\Health Service State\Monitoring Host Temporary Files
2450\2125\
One or more workflows were affected by this.
Workflow name: many
Instance name: many
Instance ID:
many
Management group:
In troubleshooting this error message, we have run the VBS manually on the server and the VBS runs and completes successfully. On the SQL side, it also appears to report back the data in under the 300 second threshold. However we are seeing
that the connection is active and then is terminated after 300 seconds.
Does anyone have any ideas or further troubleshooting suggestions for this error? We have other cluster servers that are configured the same and that do not report this error.
Thanks!
Hi，
This seems like an known issue:
On a cluster, when there are multiple clustered SQL Server instances, management pack discovery scripts may time out for Database Engines, Analysis Services, and Reporting Services. You might see events 21402.
Please go through the below article for more details:
http://technet.microsoft.com/en-us/library/dd279652.aspx
We can find the workflow name based on the event information.
Regards,
Yan Li
Regards, Yan Li
Similar Messages
-
I just loaded some July pictures into my PC iCloud photos upload folder, but I do not see them with my iPad. Are they not shared because they are past the 30 day window, or is there a different issue?
Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go. -
Can't get past the Configure page
I got a new Airport Express (old one replaced by a Genius after MBP couldn't connect to it). I try to set up a new network but I'm failing. MBP recognizes AE but I can't get past the reconfigure screen. The page keeps loading but that's as far as I get. I can't get to the point of naming my network and choosing a password.
Since I had a different AE set up here, do I need to reset something to make the AE work again?
Thanks.When the AirPort Express is new, it is broadcasting a default wireless network with a name like Apple Network xxxxxx, where the "x" can be either a number or letter.
Click the fan shaped AirPort icon at the top of your screen and look for this network. Your computer needs to be on this network in order to communicate with the AirPort Express.
An alternate way to do this is temporarily connect a spare ethernet cable from your computer to the AirPort Express. You can keep the ethernet cable connected during the configuration process and disconnect it when you have updated the Express with your new settings. -
Can anybody out there tell me how to update a MacBook with OS 10.5.4, to at least OS 10.6.6 ? When trying to update from the
Apple menu, it stops when configuring to install. I´v let it run overnight several times, no go. Help me !Start by checking if your macBook can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
(NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices). -
Copy/Paste Audio Configuration doesn't work for me. What am I doing wrong?
I've read all the other threads on this topic. Some say you have to save before you copy, etc., but nothing works for me. I open up a Logic song that has various Audio tracks, Aux tracks, and VI tracks. I open the Mixer and select Copy Audio Configuration. I close the project file, open up a new blank file, open the Mixer and hit Paste Audio Configuration. The only thing that happens is a single empty track gets pasted, that's it. This couldn't be broken in 8.01 AND 8.02, could it? Tell me I'm doing something wrong, please.
Hi,
if you want to copy the actual channel strips, you need to go to the Environment window, select them, press copy, and paste them into the Environment window of the other song.
Audio configuration doesn't equal channel strips, but refers to how these channel stripes are configured (eg. which plugins they use).
Or you could create the audio objects (channel strips) you need to use in the new song manually, and then copy the audio configuration, because then that copy/paste process would have some objects to paste the configuration into.
You could probably even create the audio objects after you have pasted over the configuration, but I haven't checked if this works. -
How do I get past the pass code on iPad running on Ios7.1 because j have forgotten it and I don not own a computer so it has to be with out
a computerUse a friend's computer. Your iPad will be erased.
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I got a used iphone 4s from a pawn shop and I cant activate it because I dont have the past owners icloud info is there anyway to unlock it and put in my information?
Take it back to whomever you purchased it from and ask for a refund. There is no way to get past the "Activation Lock".
-
I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet." Did my iphone's WiFi connection also get lost with the Contacts, Mail and Text Messages? When I tried the software update, as recommended by Winston Churchill, the iphone was connected to my desktop which is connected to the Internet.
You can't use your computers Internet connection to update your phone from the phone itself. If you want to use the computers Internet connection to update your phone you must update it through iTunes.
-
My Wireless KB and mouse are stuck in discovery mode, but I can't get past the "user password" screen because It won't allow me to enter characters.
Should work if you enter the code and hit the return key. Here is a step by step article.
http://support.apple.com/kb/HT1809?viewlocale=en_US
Captfred -
HELP! FLASH CS6 "The export operation failed because it ran out of memory"
Hey guys, really need your help on this one. I can't seem to export my flash animation video. It kept failing and prompting that "The export operation failed because it ran out of memory"
Anyone knows a solution to this. It will be very much appreciated.
Thank you very much.Hi,
It totally depends on what's the content you are trying to export. The reason is as simple as it says. The content might be really huge that it ran out of memory. Any info you can provide on the kind of stuff you have in the file?
- Hemanth -
Flash CS6, QuickTime: The export operation failed because it ran out of memory.
Exporting a QuickTime movie file seems to be an old issue with previous versions too. In CS6 I always get the error message: "The export operation failed because it ran out of memory." I've got tons of memory and have allocated increasing amounts to the cache with no success.
My small and fairly simple file was created with Flash CS5 which seemed to work fine at the time of creation. I've tried everything recommended online but with no luck so far. BTW, I reinstalled CS5 and tried that too but it just hangs now, and there's no error message.
Does anyone have a solution?
(OS X 10.7.4)If I may join this discussion... I loaded up CS6 two days ago and have just completed my first 60 second animation using it. Like everybody else here, it all went fine until I tried to export it to QuickTime – something that has never been problematic before.
I ended up exporting it as a swf and opening that in CS4. Then I could export it, but the resulting QuickTime movie was over 500 MB in size! Okay, so then I opened it in QuickTime Pro and exported it from there. This brought the file size down to a far more reasonable 35 MB, but now the soundtrack has gone! So now I am having to replace the sound in Final Cut Pro.
This is a real palaver – and not conducive to heaping praise on CS6 when questioned. I note that there is talk of Adobe rectifying this "bug", but it would be really good to hear from somebody at Adobe with:
a) An apology
b) An estimated time of delivery
c) A best practice work round
But I'm guessing that anybody that works at Adobe will be the last person to read this... -
my ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me
- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and try to restore.
- See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again. -
I accidentally turned off bluetooth and now my keyboard won't connect. I already tried to reboot the computer. I can't use the mouse because I ca't get past the user log-in screen. Please help
http://www.cultofmac.com/247979/whoops-reconnect-your-bluetooth-keyboard-and-mac -after-logging-out-os-x-tips/
had the same problem and it worked! -
Has anyone ran into the problem of having an old apple id and now can't download any past purchases
Has anyone ran into the problem of having an old apple id and now can't download any past purchases
Go to settings/itunes & app store and logout of your new ID and log in with the old, then try looking for past purchases again
-
Hi my trackpad is frozen and I also could not get force quit to work, I closed the top down and now I cannot get past the login and the cursor will not move, does anyone have any ideas
Try these two steps:
Intel-based Macs: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM
Maybe you are looking for
-
Unable to install essabse11.1.2.1.0 on existing weblogic instance on linux
I am trying to install essabse11.1.2.1.0 on existing weblogic instance on linux. I installed essabse on the same middleware home whare existing weblogic server configured(for OBIEE) Here I am unable to install and configure the weblogic, any suggitio
-
What's wrong with Http server of SunONE AS 7?
I try to output something of database to a PDF file using jasperreports-0.5.2.jar and jsp file likes: Class.forName("oracle.jdbc.driver.OracleDriver"); Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@**:1521:**","**","**"); File repo
-
Extending a AM(Not a Root AM) on OAF-CU2 is erroring out
Hi All, I have extended a Application Module(Not a root AM) to add some extra where clause in AMImpl.java. I have a region in which I have few fields, this region I am adding into page using personalization. The application module of this new region
-
HI All, In my interface the EDIFACT message would be received by Seeburger AS2 and converted to EDI-XML by Seeburger BIC module.but i dont how to do this through seeburger.if any body is having any useful link so plz send me. thanx in advance. Monik
-
Strange problem with LabPython when calling datetime.strptime()
Here's my code. Whenever this is run, I get the following error: Error 1050 occurred at PYTHON Execute Script__ogtk.vi->Writer.vi:<type 'exceptions.TypeError'>, attribute of type 'NoneType' is not callable The code works perfectly in python. Any ide