Gettin latest firmware with updater

I've updated fware with updater and although it said failed after install all seems to be ok. I noticed that my new firmware is the v5.0609.2.0.1/01-03-06 and not the v5.0616.2.0.3 (24-04-2006) version. Should I run the updater again? My previous version before I ran updater was the 2.etc/8/10/05 one(my best guess).
Nokia N95 V11.0.026 17-04-07 RM-159 Vodafone Pay Monthly
XBOX Live Gamertag : Mafustokes

it displays a "A processar" thing when loading, and takes a lot of time to start.
also, i was just informed that v5.0616.2.0.6 is not really a operator dependant update... it's a general update. but if you have a vodafone branded phone, you will not get the update because vodafone did not brand this firmware version yet.
if you do not have a branded vodafone n70, but just a locked one, you still won't get the update... don't ask why!!! i'm still tryin to find out...
Previous phones: 3330, 3410, 3510i, 3200, 6230, Nokia N70, Nokia N73, Nokia N82, Nokia 5500 Sport & Nokia N97
Current: Nokia N900

Similar Messages

Latest firmware and updates!

Hello, I am new and as far as I searched this forum, I still havent found any info about latest firmware and its updates
Anyone can give me some link or something where I can see what is new in the latest update?
I am sorry if I was blind, but at least I tried to find something
Thanks
EDIT: Thats meant to be for Nokia N80 Message Edited by ikey on 25-Apr-200701:34 AM

25-Apr-200701:31 AM
ikey wrote:
Hello, I am new and as far as I searched this forum, I still havent found any info about latest firmware and its updates
Anyone can give me some link or something where I can see what is new in the latest update?
I am sorry if I was blind, but at least I tried to find something
Thanks
Well, the latest N80 Firm. is 4.0707.0.7 but it's craap. It contains a looooot of bugs u can find the bugs discussed here.
Seriously, I do not recommend updating to this version trust me i have an N80 too..Message Edited by tekso on 25-Apr-200701:38 AM
www.symbiano-tek.com

N95 Not Updating Firmware with Updater

Hi
My Nokia Software Updater is reporting my N95's firmware to be 10.0.018, am have seen versions 11/12 available, why does the updater not allow me to download these or even update itself!
Nokia n95
Orange
UK
Thanks

okay, so i've changed my product code and now i have version 12. to make sure nothing went wrong and nothing was deleted, I removed my memory card. did the update, then put it back in. Now it is asking for my memory card password
I've never set one, i had a pin lock before, but its not accepting it, whats happend?

HT3728 Does factory reset go back to latest firmware update.

I have resently updated my airport express to latest firmware. The airport express is configured as an extension to my wifi with an Extreme as main device.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
I have since then tried to do factory reset several times without getting the device up and running again.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
I have not been able to discover the express from my iPad, iPone or iMac again.
Could the reaons be latest firmware update?
Any advice to get it back to normal?
Thanks,
Per

Does factory reset go back to the latest firmware update.
A Factory Default Reset will not affect the installed firmware.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
A solid amber light is unfortunately an indication that the internal power supply inside the AirPort Express is failing, or has failed.
I have since then tried to do factory reset several times without getting the device up and running again.
The AirPort Express has failed, and will need to be replaced.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
This is yet another confirmation that the Express has failed, and will need to be replaced.

Attempted Iphone 4 update to latest firmware update "failed"

Ive attempted to update the Iphone to the latest firmware update and it has failed 3 times, the final time it looked as though
it worked but stopped and went into new mode to go-back to Restore to old setting. Now it is locked up and asking me for the admin backup password
and everything I've tried is not working.. Not sure what to do at this point.
The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
I'm open to any ideas at this point.
Thanks Artman

Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
Open a Command window and type the command "netsh winsock reset"
Reboot your computer
Disable your antivirus and firewall
Launch iTunes
Connect the phone using a USB port directly on the computer, not a hub
When the phone is recognized in iTunes click on it, then click Restore
If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
If the update completes you are in business
You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

TC issues after latest firmware update

Here is the skinny, my TC went through the normal firmware update a bit ago. Wednesday my Internet stopped working, when I use the Airport Utility app it showed the TC online, at first, then it gave me the error that the TC did not have a valid IP. Thought might have been a problem on my ISP's end so I grabbed another router and set it up Internet no problem. Has to be the new firmware right so I pushed the firmware back 3 versions, and still the same thing no valid IP but connected to the Internet but no HDD (Yes it said not a valid IP but connected to the Internet on one wireless PC). Everything else in the house would not connect to the TC they could see it but when you went to connect never asked for a password and I got the spindle of death type deal. I saved my settings and did a hard reset with the button on the back of the TC, started over and rebuilt the connection, same thing happened not a valid IP. I have read that Apple released 3 different firmware updates supposedly the last one works, it doesn't when I load the firmware I get the same error TC does not have a valid IP. I need some help, I have cycled through power down and power up situations over and over. Anyone have any other suggestions?

Need some more info.
What is the modem.. make and model?
Is it both modem and router or just a modem?
What is the actual model of the TC.. the number from the base.. A1xxx where the x are numbers.
The latest firmware is an issue.. that is 7.6.4 and you should go back to 7.6.1
But it does seem hard to get rid of properly.
I want you to do a factory reset not just a hard reset.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Please redo the setup using all SMB names.. that is short, no spaces and purely alphanumeric characters.
eg TCgenx (use actual gen if you want) for base station name.
TCwifi for wireless name. (or TC24ghz and TC5ghz which is well worth naming both bands so you can test more carefully).
Please download and install a v5 utility on a computer if any of them use up to Mountain Lion.
Tell us what OS the computers are running and I can tell you how to install the old airport utility.
Test the TC in bridge to your other router is also a good alternative.

Mid 2006 iMac Boot Problem (Since latest firmware update)

I have a Mid 2006 17" iMac. Ever since the latest firmware update in early December, about every other startup I've been having boot problems. After the white screen with the Apple Logo and the spinning wheel it goes to a blue screen like normal, but instead of the 'Loading Mac OS X' white window popping up it stays blue and the spinning loading wheel starts. I've left it loading for quite a while before and nothing changes. I have to do a force shut off by holding the power button. and then I start it up and it will boot normally.
Any help would be appreciated.
Thanks!

Actually, I think it'san early 2006.

After latest firmware update, AppleTV2 no longer sends signal

So I updated my AppleTV2 with the latest firmware, and now it no longer sends a signal out.
Has Apple stated when they're going to fix this?

MicroUSB cable doesn't fit in AppleTV2. Try again.
Edit: Apparently the MicroUSB cable I was trying to use wasn't 'micro' enough.
I'm now trying again with a MicroUSB cable used to recharge my Xbox 360 wireless headset. Heh... the irony is amusing.

Issues with the latest N86 software update

As the title says, i updated my n86 software to the latest version with the pre-instaled application in my phone..And then the troubles started...The themes effects such as fading when rotating the screen takes like 10 and i repeat 10 second to finish, the camera starts after too much time and i'm always asked to connect to the internet..what happened?
With the 11.43 software i did not found any problem..suggestions?

The light sometimes remains on, even if i lock the keypad. Beside this, i noticed take my battery lasts like 1 hour while the light is on. This happens few times, but is really annoying.. Also, i now that the theme effects are not essential, but i want to keep my phone fully functional, so i'd like to know what's this issue about..
@metalfan I didn't expected a quick answer, i was only preoccupied for these problems
How can i to restore the original firmware?
I tried to remove my sim(also i don't use a memory card), but nothing changes...

IPHONE PROBLEM WITH LATEST FIRMWARE

I just updated my iphone to the latest firmware and i now i cant synch my iphone with my computer.. every time i do it, it shuts my computer down.
i'm running window vista
any suggestion or help

Oh, that's great news. Well, I'm not messing with my USB Periphs...they are/were all working fine, so I'm going to wait for Apple to come up with a fix for this problem.
I'm now on my 3rd uninstall/reinstall of the Mobile Support and iTunes.
After this, that's it. I'll have to wait until someone finds an easier fix. For all of you who got 2.1, enjoy. My phone crashes about 3 times a day and I'd really like it, too.

WAP4410N wireless traffic locks up even when running latest firmware update

I maintain multiple buildings, and each building has anywhere between 1 and 4 Cisco/Linksys WAP4410N access points. The problem is that at random intervals, the access points just stop sending and receiving wireless traffic. Every day or two, I have to log into every single access point (either via HTTPS or SSH) and reboot them in order for them to start working again.
In short, here are the config details:
They are all version 2 hardware (either WAP4410N-A V02 or WAP4410N-E V02).
They are running IPv4 (IPv6 is disabled) and get static IP addresses via DHCP.
When there are WAPs with overlapping signals, each WAP is on a different non-overlapping channel (1, 6, or 11).
Each WAP has two SSIDs (with spaces in their names). One is secured with WPA2. The other is unsecured.
There are two VLANs on the Ethernet interface. Each of the two SSIDs are assigned to a separate VLAN.
There is a DHCP server on the network, so the WAPs do not actually assign IP addresses to clients.
All of the WAPs are running on PoE switches. However, some are gigabit and some are 10/100 switches. Brands vary (Dell and Linksys) and models vary.
Cisco finally recognized this issue as:
CSCtx62203—In certain environments and traffic model, the WAP4410N may lockup after some undetermined time. Workaround: Reboot the device.
As such, the workaround didn’t really offer anything new. Rebooting every WAP ends up being a very time consuming process. It’s awful. And since you have no control over when this issue surfaces and can’t put any safeguards in place, I get calls about it at various points of the day almost every day.
Supposedly the most recent firmware update (2.0.6.1) claimed to fix the issue, but it only seemed to make it worse. So now instead of a WAP locking up every day or two, it locks up anywhere between every 15 minutes to 4 hours when in use.
The firmware was updated and the following issue was fixed in firmware version 2.0.6.1: CSCtx62203—In certain environments and traffic model, the WAP4410N may lockup after some undetermined time. (A protection mechanism was added to guard against sporadic problems with client association that could occur after six to 24 hours.)
As for troubleshooting, there are no error packets. On access points running firmware 2.0.6.1, these messages appear:
Feb 7 13:42:27 Syslogd start up
Feb 7 13:51:59 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 13:52:01 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 13:52:05 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 14:47:01 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 14:47:02 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 14:47:05 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 15:22:53 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 15:22:56 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 16:15:19 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 16:15:33 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 12:27:25 Syslogd start up
Feb 7 14:06:18 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 14:06:23 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 14:44:28 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 14:44:31 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 15:09:18 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 15:09:24 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 15:42:23 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 15:42:25 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 16:52:18 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 16:52:24 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 16:53:05 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 17:20:05 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 17:20:08 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 17:23:34 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 17:23:39 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 21:21:28 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 21:21:30 syslog: Found beacon stuck, down and up the VAP interface.
Feb 8 09:55:23 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 8 09:55:29 syslog: Found beacon stuck, down and up the VAP interface.
These log messages appear on both WAP4410N-A V02 and WAP4410N-E V02 devices.
I noticed that when the “beacon stuck” message appears, wireless traffic locked up 10-15 minutes prior to the message’s appearance in the log, and the SSID drops for 4-6 minutes after the message appears.
Is there anything that can be done to address the issue?

1) LAN port speed doesn't appear to have any effect
2) Forcing a connection type doesn't seem to have any effect. This is also rather impractical.
3) I don't have that option (though there is a TKIP/AES mixed option). Either way, I'd rather not have to resort to using a weaker encryption method.
4) No effect.
I did manage to find some information about the error message (older versions of firmware didn't even offer that clue).
http://www.dd-wrt.com/wiki/index.php/Advanced_wireless_settings#Beacon_Interval
I ended up increasing the beacon interval from 100ms to 500ms under Wireless > Advanced Settings.
The wifi analyzer app on android seems to keep dropping the SSID when the beacon interval is set that high, so I might have to adjust it to find a good balance.
However, while it was set to 500ms, none of the access points went down for two days.
[edit]: I reduced the beacon interval incrementally down to 300ms. It started locking up at 250ms.

My macbook pro screen remains grey after latest firmware update

i just had the update notification for the latest firmware, proceeded to do so, and the screen remains grey, its been more than one hour and still grey, since its a firmware update i don't want to disturb it, but could it be that is taking so long?

Reboot it by pressing the power button down hard to force a shutdown.
If your still having problems, take it to Apple. I hope you have AppleCare becuase if they can't fix it, it's a new logicboard.

Internet stopped working on MBA after latest firmware update. Help please!!!

Internet stopped working after installing the latest firmware update. WiFi still connects to router, our other mac desktop still connects to internet as usual (same network). I can't even re-install the MBA OS since it needs an internet connection!!!
Any ideas?

FIXED.
I swapped our wireless router for a newer one, internet seems to work fine again (we were sent a new one by our internet provider which we never set up until now).

Zen Touch latest Firmware Update...player not connec

I tried installing the latest Firmware update for my Zen Touch (released 2-09).
The player is connected and recognized by Windows and the Media Explorer. However, when I try to install the new Firmware it keeps saying "player not connected".
I tried d/l two different language packages cause I wasn't sure what counted - player language or operating system langauge. Anyway, that didn't make a difference.
So what do I do? I have no idea where to start. It's firmware for the correct device connected through Windows XP.
I have made a firmware update before, which worked fine. After that I updated the media explorer software.
Help is very much appreciated! Thank you in advance.
-tina-Message Edited by tinas on 2-0-2005 08:56 PMMessage Edited by tinas on 2-0-2005 09:00 PM

Perhaps it's worth making sure no software is using the player, so reboot the PC, and turn off the Creative Detector. Then try again.
Are you trying to upgrade to the .0.03 version?

Latest firmware update and startup problems

Hi I have been reading all about this so-called firmware and its importance in keeping updated on my new macbook pro. Therefore I have been diligently trying to keep it updated over my dial-up connection. I installed the latest firmware as my automatic update suggested. Now I get the spinning startup circle of death. Tried booting in safe mode to no avail. Help? (I also have version cue installed.)

Hi jbell,
Firmware updates are not availible in Software Update, only sofware updates are. Did you Repair Permissions prior to and after updating software? You always should. Go to Applications-Utilities-Disk Utility, and highlight Mac OS X in the left hand column, then Repair Permissions below. Firmware updates are available here....
http://www.apple.com/support/downloads/macbookproearly2006firmwareupdate101.html
http://www.apple.com/support/downloads/macbookpro15inchsmcfirmwareupdate.html

Gettin latest firmware with updater

Similar Messages

Maybe you are looking for