Getting 100% patched image

Hi Guys,
I am trying to get 100% patched image through build and capture process. I am using below trying to get fully patched image. i have config manager 2012 R2 integrated with MDT 2013
- I have 'install software' steps in TS (multiple times to get all the patches)
- For office 2007 and office viewers, i have downloaded patches and added to update folder with office package.
- I run offline servicing to get any missed out OS and office pacthes
but still once image is deployed, it detects more updates from SUP (specially for office viewers).
Looking for some pointers to get patched image out of build and capture process.
Regards,

Offline servicing will only get OS patches...not Office.
The collection where your OS Deployment TS is targeted should have Updates targeted towards it as well. That way they are applicable while the TS is running. Otherwise the updates won't get applied until after the system is deployed and becomes part of the
regular updates collection. You might already be doing this...it wasn't clear from your post.
Jarvis
Blog:
http://verbalprocessor.com Twitter:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
The postings on this site are my own and don’t necessarily represent my employer’s positions, strategies or opinions.

Similar Messages

SharedVariableNode didn't get properly patched to DS

I'm receiving very occasional errors as follows:
#Date: THU, JAN 01, 1970 12:00:13 AM
#OSName: VxWorks
#OSVers: 6.3
#OSBuild: Jun 14 2012, 08:43:39
#AppName: /c/ni-rt/system/lvrt.out
#Version: 12.0rc7
#AppKind: AppLib
<DEBUG_OUTPUT>
01/01/70 12:04:48.865 AM
DWarn 0xE3E2BC8B: SharedVariableNode didn't get properly patched to DS
source/variable/SharedVariableCallbacks.cpp(99) : DWarn 0xE3E2BC8B: SharedVariableNode didn't get properly patched to DS
I am using Shared Variables ... they are Single Process SVs with RT Enabled (these are not Network Published). This will occur in perhaps 1 in 100 runs, so difficult to isolate. I am using SVs to maintain current values only for communication across deterministic processes.
Do SVs need to be initialized?
Can anyone decode the error message ...?

If this system is critical refrain from using Shared Variable Engine. I have a project in which I used the shared variable engine and every few weeks the shared variable engine goes down, I looked into it for a few weeks, but the behavior of the shared variable engine is exteremly erratic when it comes to error handling. If you research NIs white papers enough, they warn you about the reliability and throughput of the shared variable engine. Try using the Network Stream VI's. they are still fairly simple to implement but as far as performance go, they far exceed shared vairables. they are the closest thing to using TCP/IP directly, but much simpler to implement.
Good luck,
Dan,
www.movimed.com - Custom Imaging Solutions

Can't get 100% signal strength

Under OS X 10.5.7 I had to downgrade AirPort Extreme firmware to 7.3.2 just to make it work. With the OS patch I gave in to the constant harassment of the base station software telling me to upgrade (and interrupting connectivity frequently).
With the new firmware, I have not been able to get 100% signal strength at my iMac, which sits less than 15 feet away from the base station. If anyone has any suggestions, please fire away. I am afraid to go back and get repeatedly harrassed about it.

I still have this problem...being harassed by Airport to upgrade the firmware, tried it again, same effect. Signal strength went to complete crap, made the network unusable. Reversed the change, problem solved. Does Apple even know of this problem? I am so tired of dealing with the harassment of the Airport utility (pops up intermittently on all computers on the network), I am close to replacing the thing with an Ethernet-over-power-lines system.

AP802-BOOT-M bootloader mode and trying to get a new image on there

Ok. Dont ask me how I managed to get myself in this state. Surfice to say I was trying to upgrade an IOS image on an integrated 887 wireless router and its AP802GN access point.
The IOS to LWAP conversion did not go well and now I am in the state where I am trying to get the autonomous image back on there.
so I am faced with either this output.
*Nov 19 22:14:54.423: %SM_LICENSE-6-BOOTIMAGE_CHANGE_TO_AUTO: Boot image has been changed to autonomous image
Please use router EXEC CLI service-module wlan-ap 0 reload
to bootup autonomous image on AP
Which when executed only brings me back again to the same output.
I cannot do a show flash:
it return
So I thought maybe put it in bootloader mode and copy an image across.
So I am at the ap: prompt with no understanding as to what to do next as the AP I think has a 10.0.0.1 address and the router it is sitting in has a 192.168.0.1 address.
I also tried to load a new image when it was in the pr

I hear what your are saying but it would appear that whilst the software 7.0.235.0 which is on my 2106 WLC does support the AP802 the actual hardware of the 2106 does not.
I will raise a TAC case tomorrow with Cisco just to make sure but this excerpt from their website is pretty straight forward.
Cisco 2100 Series Controller
The Cisco 2100 Series Wireless LAN Controllers work with Cisco lightweight access points and the Cisco Wireless Control System (WCS) to provide system-wide wireless LAN functions. Each controller controls up to 6, 12, or 25 lightweight access points for multiple-controller architectures that are typical of enterprise branch deployments. It may also be used for single controller deployments for small and medium-sized environments.
Caution Do not connect a Power-over-Ethernet (PoE) cable to the controller's console port. Doing so may damage the controller.
Note Wait at least 20 seconds before reconnecting an access point to the controller. Otherwise, the controller may fail to detect the device.
Features Not Supported
This hardware feature is not supported on Cisco 2100 Series Controllers:
•Service port (separate out-of-band management 10/100-Mbps Ethernet interface)
•Cisco 2100 Series Controller does not support the access point AP802.

Backup tips for 100,000+ images/yr

I shoot roughly 100,000 images a year and I am on the road quite a bit. I am currently using a Macbook Pro w/256GB SSD so space is limited. I pretty much just keep the images from the current week before I move them to a backup drive.
Any suggestions to access the archive on the road? I currently have a few Travel HD's that are roughly 2TB each. I often get requests where I need to access a specific RAW file when I am out of town. Any Cloud based solutions? Should I explore a home server?

Cloud Storage & Unlimited Online Backup | Livedrive

I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again.

How can I use applet to get the desktop image of client

hi,I have a question to ask u.
How can I use applet to get the desktop image of client? Now I develop a web application and want user in the client to get his current image of the screen.And then save as a picture of jpeg format ,then upload it to the server?
I have done an application to get the screen image and do upload file to server in a servlet with the http protocal.

Since the desktop image is on the client's local hard drive, you'll need to look at trusted applets first.

How do I use Adobe Edge to get faded header images on my website?

Trying to use Adobe Edge to get faded header images on my website. Was referred to Adobe Edge because it is supposed to be easy for beginners. I was able to upload my images, but then there was no instruction/direction on what to do next. Everything I clicked just brought me somewhere else. I'm a novice who needs help with coding, as everytime I tried adding coding to my page, it messed it up. I would appreciate if someone can tell me what to do after I upload the images.

Yes, Animate. Again, I uploaded the images, but then, I didn't see any directions on what to do next, as I would like fading header images for my website. I understand that it is supposed to generate the code for my website, which is where I need the most help.

How do I get a "transfer images" button to show up in the solution center?

How do I get a "transfer images" button to show up in the solution center for my officejet 6500 709a on XP?
Scan buttons are displayed and work, as does print.

What installing the twain plug-in, you mean? Go to your applications folder. Find the Adobe Photoshop Elements 11 folder. Look in there for a folder called support files, then for a folder called optional plugins. In the Optional Plugins folder, there should be a folder called ImportModules. Just drag that from the Optional Plugins folder to the regular Plugins folder.
This will be infinitely easier to do if you put your applications folder window into list view, not the default icon view. To do that, click this button at the top of the window:

How to get a .tif image with n different colors?

Hi..i want to know how can i get a .tif image colored by some colors. I want to do something like this:
if(tifImage.pixel < 0.1) {
tifImage.pixel = yellow;
else if( 0.1 <= tifImage.pixel && tifImage.pixel <0.5){
tifImage.pixel = red;
up to n colors.
I prove the next code, but it is not getting the colors i want.
public void generateImage(BufferedImage bi,double alto,double medio,String output){
          int width = bi.getWidth(); // Dimensions of the image
          int height = bi.getHeight();
          // Some constant colors (as arrays of integers).
          int[] red = {255, 0, 0};
          int[] green = { 0,255, 0};
          //int[] blue = { 0, 0,255};
          int[] yellow = {255,255, 0};
          //int[] background = { 85, 85, 85};
          int[] background = { 255, 255, 255};
          // The original image data will be stored on this array.
          int[][][] imageData = new int[width][height][3];
          // We'll fill the array with a test pattern bars thingie.
          double[] pixelArray=null;
          for(int w=0;w<width;w++)
               for(int h=0;h<height;h++)
                    if(bi.getRaster().getPixel(w,h,pixelArray)[0]>=9000){
                         //lo dejo blanco
                         imageData[w][h] = background;
                    else if(bi.getRaster().getPixel(w,h,pixelArray)[0]>=alto){
                         //lo dejo rojo
                         imageData[w][h] = red;
                    else if(bi.getRaster().getPixel(w,h,pixelArray)[0]>=medio){
                         //lo dejo amarillo
                         imageData[w][h] = yellow;
                    else{
                         //lo dejo verde
                         imageData[w][h] = green;
          // Now we have a color image in a three-dimensional array, where the
          // third dimension corresponds to the RGB components.
          // Convert the color image to a single array. First we allocate the
          // array.
          // Note that this array will have the pixel values composed on it, i.e.
          // each R,G and B components will yield a single int value.
          byte[] imageDataSingleArray = new byte[width*height*3];
          int count = 0;
          // It is important to have the height/width order here !
          for(int h=0;h<height;h++)
               for(int w=0;w<width;w++)
                    // Rearrange the data in a single array. Note we revert RGB, I still don't
                    // know why.
                    imageDataSingleArray[count+0] = (byte)imageData[w][h][2];
                    imageDataSingleArray[count+1] = (byte)imageData[w][h][1];
                    imageDataSingleArray[count+2] = (byte)imageData[w][h][0];
                    count += 3;
          // Create a Data Buffer from the values on the single image array.
          DataBufferByte dbuffer = new DataBufferByte(imageDataSingleArray,width*height*3);
          // Create an pixel interleaved data sample model.
          SampleModel sampleModel =
               RasterFactory.
               createPixelInterleavedSampleModel(DataBuffer.TYPE_BYTE,
                         width,height,3);
          // Create a compatible ColorModel.
          ColorModel colorModel = PlanarImage.createColorModel(sampleModel);
          // Create a WritableRaster.
          WritableRaster raster = RasterFactory.createWritableRaster(sampleModel,dbuffer,new Point(0,0));
          // Create a TiledImage using the SampleModel.
          TiledImage tiledImage = new TiledImage(0,0,width,height,0,0,sampleModel,colorModel);
          // Set the data of the tiled image to be the raster.
          tiledImage.setData(raster);
          // Save the image on a file.
          JAI.create("filestore",tiledImage,output,"TIFF");
Thanks

I tried that. When I open one image and set the exposure, then go to open the second image, nothing happens. I then saved one image as a psd file, then it would let me open the raw file a second time. When I had both open on the same screen and dragged the layer from one into another image, the layer size ended up being different than the other file. It was shifted down and to the left. I need these images to be pixel locked, and the user experience I went through did not allow me to do this.
I also do not see a way to copy/paste layers between files.

How can you get a mirror image of a photo on iPhoto?

How can you get a mirror image of a photo on iPhoto?

By using an external editor. Preview is already on your Mac. It's called 'Flip Horizontal'
In order of price here are some other suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate or the App Store.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

How to I get a mirror image of a 3D extrude and Bevel image?

I created a ribbon using the extrude and bevel effect and then mapping it with a custom symbol. I copied the image and then tried to get a matching image on the flipside to mirror it but cannot seem to figure it out. Is there a way to somehow flip the orientation of the image? I tried using transform and then reflect and it does not do anything. I tried to do it manually in mapping and flipping the box upside down and in reverse but it just doesn't seem result in the a reflective image. Any ideas on this? Attached are the two images I am trying to get to reflect each other. Thanks

It works so it is you who have perhaps a blind spot you have to select reflect X and move the object horizontally just look at my settings and the video.
If you do not see a difference than what I have done and what Scott has suggested than what you actually did then he problem is something entirely different.
Here is a video you can go wrong if you follow it.
http://www.wadezimmerman.com/videos/TransformReflex.mov

SMC not getting suggested patch info from Update Manager in Solaris 10

Hi All,
why SMC not getting suggested patch info from Update Manager in Solaris 10??
Thank you in advance.

Hi All,
why SMC not getting suggested patch info from Update Manager in Solaris 10??
Thank you in advance.

How to get the full image directory when i upload the image to web page???

hai, how to get the full image directory when i upload the image to web page???
here is the example:
<form action="uploadfile.jsp" method="post">
image<input type="file" name="image" />
<input type="submit" value="submit"/>
<%
String s=request.getParameter("image");
%>
<%=s%>
</form>
i upload the image from C:\image\center.gif. i use request.getParameter just can get the image name like "center.gif". Can anybody help me how to get the full path name. Thanks a lot..

There is no need to get the path. It is also fairly pointless as the server cannot access the client's local file system.
Carefully read this article how you can upload files the right way: http://balusc.blogspot.com/2007/11/multipartfilter.html

In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

Hmmm, I wonder if that window is hidden or off screen? Have you moved the pic window around to look under it?
Might try this...
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
/Users/YourUserName/Library/Preferences/com.apple.Preview.plist
/Users/YourUserName/Library/Preferences/com.apple.Preview.bookmarks.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Getting 100% patched image

Similar Messages

Maybe you are looking for