Getting 4200 error
getting that error and cant fix it here is my info..
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCV-RX560(UC)
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: RADEON 9200 SERIES \RADEON 9200 SERIES
IDE\DiskMaxtor4D080H4_________________________DAH017K0, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STCD-RW_GCE-8160B________________1.02___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomPIONEERDVD-ROM_DVD-117R________________1.04___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: PIONEER DVD-ROM DVD-117R, Rev 1.04
Drive is empty.
F: HL-DT-ST CD-RW GCE-8160B, Rev 1.02
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 1 2 4 8.
The drive CDRW speeds are: 1 2.
The last failed audio CD burn had error code 4200(0x00001068). It happened on drive F: HL-DT-ST CD-RW GCE-8160B on CDRW media at speed 2X.
im not really good at knowing comps so if ya could try to help me in away i can understand.
Try here for Chipset drivers
http://downloadfinder.intel.com/scripts-df/filter_results.asp?strOSs=44&strTypes=DRV%2CARC%2CUTL&ProductID=572&OSFullName=Windows*+XP+Professional&submit=Go%21
Power supply wattage should be on a sticker on the side of the case.
Similar Messages
-
Why do i get an error from bios for my sata dvd recorder?
Hi!
I have updated my bois to the latest 1.70 version for my K9N Neo 1.0 motherboard and get an error from bios that the S.M.A.R.T drives dont work and that i cant be read from my Sata DVD recorder?
I have a samsung lightscribe 18X dvd recorder and it was no problem until i updated the bios. I have tryed to turn off s.m.a.r.t drives checkup but i still get the error.
What can i do to stop bios from the error? now i have turn my bios to "no errors" so i dont have to clickon F1 every time i start och restart my computer.
im using:
XP PRO 32Bit
AMD AM2 4200+
2048 MB Corsair 800Mhz Ram
2 x WD 250 GB Sata II 8 MB
1 x Samsung dvd lightscribe recorder
K9N Neo motherboard with 1.70 v Bios ( updated today)
//VargTassQuote from: vargtass on 20-June-07, 22:51:54
Hard Disk : S.M.A.R.T Status BAD, Backup and Replace
//VargTass
Quote from: BOSSKILLER on 20-June-07, 19:39:17
so if you disable SMART & reported errors can your Sata DVD works normal? -
Direct Access client getting NameResolutionFailure error
Hi,
I'm trying to setup Direct Access on a Windows 2012 R2 server and I'm running into what is hopefully a pretty easy problem to resolve.
I've followed the instructions to setup a simple setup for DA on a Windows 2012 R2 server with everything all on one server and I'm running behind a TMG 2010 server. On the TMG server I've published the my DA server using a server publishing rule
based on these instructions
http://danstoncloud.com/blogs/simplebydesign/archive/2013/04/04/tmg-can-be-a-good-friend-of-directaccess.aspx
The setup seems pretty straight forward, but now when I'm testing my clients I'm getting the NameResolutionFailure error when I try and connect when I'm not on our internal network.
The problem I'm pretty sure is DNS related because when my test Windows 8.1 client is on our internal network everything works fine.
When I plug the machine into an external network, I get the NameResolutionFailure error for the DA client. If I try and ping anything address on our domain name I get an error that the address is unresolvable. I can ping any other domain name address fine.
On my DA server, on the DNS tab of the Infrastructure Server setup I have the following entries:
mydomain.com fdf3:137e:5133:ce07:1000::127
directaccess.mydomain.com
DirectAccess-NLS.mydomain.com
directaccess.mydomain.com is the publicly resolvable name of my DA 2012 R2 server that is bound the external IP address published on my TMG 2010 server. This name is not resolvable when on any internal machines.
If I execute the get-DNSClientNRPTPolicy command I get this:
Namespace : DirectAccess-NLS.mydomain.com
QueryPolicy :
SecureNameQueryFallback :
DirectAccessIPsecCARestriction :
DirectAccessProxyName :
DirectAccessDnsServers :
DirectAccessEnabled :
DirectAccessProxyType : UseDefault
DirectAccessQueryIPsecEncryption :
DirectAccessQueryIPsecRequired : False
NameServers :
DnsSecIPsecCARestriction :
DnsSecQueryIPsecEncryption :
DnsSecQueryIPsecRequired : False
DnsSecValidationRequired : False
NameEncoding : Utf8WithoutMapping
Namespace : directaccess.mydomain.com
QueryPolicy :
SecureNameQueryFallback :
DirectAccessIPsecCARestriction :
DirectAccessProxyName :
DirectAccessDnsServers :
DirectAccessEnabled :
DirectAccessProxyType : UseDefault
DirectAccessQueryIPsecEncryption :
DirectAccessQueryIPsecRequired : False
NameServers :
DnsSecIPsecCARestriction :
DnsSecQueryIPsecEncryption :
DnsSecQueryIPsecRequired : False
DnsSecValidationRequired : False
NameEncoding : Utf8WithoutMapping
Namespace : .mydomain.com
QueryPolicy :
SecureNameQueryFallback :
DirectAccessIPsecCARestriction :
DirectAccessProxyName :
DirectAccessDnsServers : fdf3:137e:5133:ce07:1000::127
DirectAccessEnabled :
DirectAccessProxyType : NoProxy
DirectAccessQueryIPsecEncryption :
DirectAccessQueryIPsecRequired : False
NameServers :
DnsSecIPsecCARestriction :
DnsSecQueryIPsecEncryption :
DnsSecQueryIPsecRequired : False
DnsSecValidationRequired : False
NameEncoding : Utf8WithoutMapping
So I'm thinking that the issue is related to the fact that the NRPT table says that directaccess.mydomain.com address there is no DNS specified. In fact it seems like that entry shouldn't even be there. When I was configuring DA for the first
time, I got a warning that said:
Warning: The NRPT entry for the DNS suffix .serverdomain.local contains the public name used by client computers to connect to the Remote Access server. Add the name Servername.serverdomain.local as an exemption in the NRPT.
I wasn't sure what this meant at the time but I'm guessing it's relevant to this problem.
Can some one give some help with this?
Thanks in advance
NickHi,
So here is what I did. First the IP information from my DA server IPHTTPS address from ipconfig /all
Tunnel adapter IPHTTPSInterface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : IPHTTPSInterface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : fdfd:1374:5130:1000::1(Preferred)
IPv6 Address. . . . . . . . . . . : fdfd:1374:5130:1000::2(Preferred)
IPv6 Address. . . . . . . . . . . : fdfd:1374:5130:1000:2400:8f5a:a931:1ff8(Preferred)
Link-local IPv6 Address . . . . . : fe80::2400:8f5a:a931:1ff8%17(Preferred)
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 436207616
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-4F-8E-38-00-15-5D-00-96-05
NetBIOS over Tcpip. . . . . . . . : Disabled
So the address of my IPHTTPS address appears to be -S using this address as the source and going to an internal machine with an IPV6 address and got this:
tracert -S fdfd:1374:5130:1000:2400:8f5a:a931:1ff8 testserver
Tracing route to testserver.mydomain.com [fdfd:1374:5130:ce07:1000::220]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms daserver.mydomain.com [fdfd:1374:5130:1000:2400:8f5a:a931:1ff8]
2 * * * Request timed out.
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14
So it looks like from the IPHTTPS address I can't get to any internal IPV6 addresses on my internal IPV6 network I think right? I did a route print on the DA server and got this:
===========================================================================
Interface List
12...00 15 5d 00 96 05 ......Microsoft Hyper-V Network Adapter
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
16...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter
17...00 00 00 00 00 00 00 e0 IPHTTPSInterface
===========================================================================
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 172.16.0.21 172.16.0.127 261
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
172.16.0.0 255.255.240.0 On-link 172.16.0.127 261
172.16.0.127 255.255.255.255 On-link 172.16.0.127 261
172.16.15.255 255.255.255.255 On-link 172.16.0.127 261
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 172.16.0.127 261
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 172.16.0.127 261
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 172.16.0.21 Default
===========================================================================
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
12 261 ::/0 fdfd:1374:5130:ce07:1000::21
1 306 ::1/128 On-link
12 4205 fdfd:1374:5130::/48 fdfd:1374:5130:ce07:1000::21
17 306 fdfd:1374:5130:1000::/64 On-link
17 306 fdfd:1374:5130:1000::/128 On-link
17 306 fdfd:1374:5130:1000::1/128 On-link
17 306 fdfd:1374:5130:1000::2/128 On-link
17 306 fdfd:1374:5130:1000:2400:8f5a:a931:1ff8/128 On-link
12 261 fdfd:1374:5130:7777::/96 On-link
12 261 fdfd:1374:5130:ce07::/64 On-link
12 261 fdfd:1374:5130:ce07:1000::127/128 On-link
12 261 fdfd:1374:5130:ce07:6b8c:21b9:52b4:e7c5/128 On-link
12 261 fe80::/64 On-link
17 306 fe80::/64 On-link
17 306 fe80::2400:8f5a:a931:1ff8/128 On-link
12 261 fe80::e00f:6c15:fde4:6491/128 On-link
1 306 ff00::/8 On-link
12 261 ff00::/8 On-link
17 306 ff00::/8 On-link
===========================================================================
Persistent Routes:
If Metric Network Destination Gateway
0 4294967295 fdfd:1374:5130:1000::/64 On-link
0 4200 fdfd:1374:5130::/48 fdfd:1374:5130:ce07:1000::21
0 256 fdfd:1374:5130:ce07::/64 On-link
0 4294967295 fdfd:1374:5130:7777::/96 On-link
0 4294967295 ::/0 fdfd:1374:5130:ce07:1000::21
===========================================================================
Am I missing a route here?
Thanks -
I have never been so frustrated before in my life with any phone. I find it obnoxious as it is that I cannot simply drag and drop files (especially MP3's) straight from my PC directly into my phone, which I have been used to doing up until now. Everyone who convinced me to get the iPhone has instructed me that my frustration can be fixed by downloading iTunes and syncing it all up via that program (which I have never used before). So, I downloaded the program successfully, however when I connect the iPhone 4 to the PC and iTunes is open, I get an error message that 'iTunes cannot read the content of the iPhone "iPhone" and that I should go to the Preferences tab of the iPhone and select 'restore' to restore this phone to factory settings. First of all, I don't understand why I need to do that. I have already downloaded apps and other important things in the 2 days that I have the phone. I am also scared that it will erase my contacts. This is such a headache. Music is very imporatant to me, but I am getting so frustrated that I don't have freedom over the phone which I thought was supposed to be one of the best out there. I would really appreciate help in this matter. I am sure the phone is great but I am on the verge of taking it back and getting something else.
Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
I cannot open Pages from the app or from a saved document on the desk top. I get an error: "The application Pages cannot be opened -1712" Any suggestions?
The following previous discussion has a solution that worked for a variety of people with the -1712 error on a variety of applications and may help: The application Safari can't be opened -1712
-
i was getting this error whenever i tried to sync my ipod touch to itunes.. i had 10.5 version of itunes so i waited till apple updates it .today apple udated itunes and still after udating to 10.6 version i am getting this error please i have tried many things like download mobile me i uninstalled itunes and the reinstalled it but nothing seems to work please i haven't sync my ipod from last month and i want to sync some songs in it please please help..........................i have also tried to reset sync history from edit/preferences but nothing is working what should i do should restore my ipod touch or create a new id and start all over from beginning??please help....thanks
i tried searching more problems like this but everyone has given a link to a page which gives steps to solve this issue and i have already tried that before but nothing worked ...should i restore my ipod but i am worried that if i restore my ipod and if i cannot sync my ipod then i wont be having anything on my ipod.....do u any specific solution that can solve this issue 100%??
-
I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?
Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
Have a Macbook Pro and a 4th gen iPod Touch. Downloaded and install iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says --The file "iTunes Library" cannot be read because it was created by a newer version of iTunes--. I am running iTunes 10.1. I searched for Updates to my MacBook Pro (running 10.6.7), but comes back saying no updates available. WHAT IS GOING ON??
Is your computer still authorized in the Store menu in iTunes?
iTunes Store: About authorization and deauthorization
When I changed to my new MacBookPro I had to authorize it although I used TimeMachine to transfer my settings and data.
Did you try to deselect Wi-Fi syncing and enable it again after that?
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
Did you already transfer your purchases and manually started a backup? -
This is what I think may have happened. The other day, Thursday Sept 8th, I shut down my pc in the middle of a Firefox upgrade. Now when I try to access Firefox on my pc, I get this error message:
XULRUNNER Error: Platform version '6.0.2 is not compatible with min Version >= 6.0.1 max Version < 6.0.1
What is this about and how can I retsore access to Firefox on my pc?If you use ZoneAlarm Extreme Security then try to disable Virtualization.
Do a clean reinstall and delete the Firefox program folder.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]] -
Itunes get "Send Error Report" message
Alright so when I try and open itunes I get a send error report message. I've tried updating it and that doesnt work and I've already tried reinstalling it. I thought quicktime was the error so I went to try and remove it from my computer. As it was loading to remove quicktime I got a "fatal error" message and quicktime could not be deleted.
Help please?
Message was edited by: Joshua MalinItunes has encountered a problem and needs to close
the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
try to open your QuickTime. does it launch properly, or do you get an error message?
if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.) -
Hi,
I recently downloaded the newer version of FF and now when i click to open it i am getting an error in the top left corner of my screen. i can't even read what the message says in entirety b/c it's wrapping over off the side of the screen. When I click the error message than FF will open. Also, when I'm trying to send emails from an online shopping cart thru my business and I'm getting an error that it won't send and that's never happened until this problem w/FF. Please tell me what i should to to get FF working normally again.Can you tell us what text is in the part that you can read ?
Is it a message from Firefox or from the Mac Operating System ?
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?
Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??
use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.
-
Getting following error while creating a datasource connection with oracle database.
I have 32 bit oracle server installed in remote server.
and 64 bit sql server 2008 r2 report server installed, and 64 bit oracle client installed on my report server while create a new datasource
in the report server i am getting this error
Error
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle
client components installed
How can i fix this and let me know the reasonThis link will help you out.
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/0a38fa00-31de-49de-b68f-4c5a4565e5b1?prof=required
Milan Das -
I am a new learner i am getting an error while running a sample welcome pag
hi ,
i am able to crate a package and also a page but when i run that page i am getting the follow error messages, i am using jdeveloper version 10.1.3.3.0.3
and also please help me how to create a business component package in this version.
Validation error in document "WorklistPG":
Invalid value "/oracle/apps/fnd/wf/worklist/webui/AdvancWorklistRG" for property "Extends" on component "WorklistRN". validating OA Extension XML "C:\New Folder\jdeveolper\jdevhome\myprojects\oracle\apps\fnd\framework\toolbox\samplelib\webui\StandardWidgetsPG.xml" file.
validating OA Extension XML "C:\New Folder\jdeveolper\jdevhome\myprojects\oracle\apps\fnd\framework\toolbox\samplelib\webui\WorklistPG.xml" file.
Validation error in document "HomePG":
Invalid value "/oracle/apps/fnd/wf/worklist/webui/AdvancWorklistRG" for property "Extends" on component "Notifications". validating OA Extension XML "C:\New Folder\jdeveolper\jdevhome\myprojects\oracle\apps\fnd\framework\toolbox\tutorial\webui\HomePG.xml" file.
[5:58:33 AM] Compilation complete: 0 errors, 19 warnings.
Exception Details.
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_NO_REGION_DATA. Tokens: REGIONCODE = /Idha/oracle/apps/po/WelcomePG/webui/WelcomePG;
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
at OA.jspService(_OA.java:71)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
please help me in this issue i am new to this i am getting an error saying Warning: There is no component in the package.
thanksHi,
its a validation error. However, this forum is not about OA framework which is why I suggest you try this forum:
OA Framework
Frank
Maybe you are looking for
-
To remove line items from invoice which have 0 qty.
Dear Friends, Requirement: To remove line items from invoice which have 0 qty. For this I wrote the code in RV60AFZZ. It is very well happening, but when last line item comes it is failing. What I have written is " DELETE XVBRP WHERE FKIMG = '0' ." .
-
Elements freezing on acquire image from scanner
When using a Neat NM-1000 scanner and I acqire image from scanner the program loads the Neat software to scan the image and runs the photo through the scanner and then freezes the software and will not allow me to continue. Is there and update I need
-
We need to find out when a calendar event was created. I have been unable to find this information in Lightning or any exports. From looking into the local.sqlite database file the cal_events table has a field called time_created. Unfortunately when
-
Web documents seem to print double from websites.
When I get a web receipt or a web map, my print is doubled from most all websites. I suspect it comes from some Firefox. How do I cure this problem?
-
At least one entry could not be found in object buffer
Hi All, I am frequently getting the message <b>'At least one entry could not be found in object buffer'</b> when I am saving a service process through CRMD_ORDER. Does anybody have faced the similar situation, if so pls help me on this. (Note: For yo