Getting a blue screened msg stating there was a crash dump, what does this mean?

the computer keeps restarting after a blue screened msg pops up that there was a crash dump, any suggestions of what is wrong?

Try to ask advice on a Windows oriented forum.
* http://www.bleepingcomputer.com/forums/ - BleepingComputer.com - Computer Help Forums
* http://windowssecrets.com/forums/ Windows Secrets Lounge

Similar Messages

  • TS1702 A message keeps popping up stating there is no data available what does this mean?

    I just purchased the McGraw Hill nursing entrance exams app and from the first time i tied logging in it freezes for a bit and then a message pops up stating that there is no data available or internet. I tried all the trouble shooting methods and I am positive its not my internet. I have a first generation iPad but tried it with the iPad 2 and the same thing happened. Please help :( thank you for yourt time

    Contact your carrier for the PUK code for your sim. Some carriers require sim pins on all sims. Read more here:
    http://support.apple.com/kb/HT1316

  • I am trying to finalize a project but it keeps saying that there was an error (-108) what does this mean and what do I do to fix it?

    I am trying to finalize a project in iMovie but it keeps telling me that there is an error (-108). Can anyone tell me what this is and how I could fix it?
    r0b0c0p

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • HT201210 When trying to restore the iPhone 4, I get a message that says "The requester resource was not found." What does this mean?

    When trying to restore the iPhone 4, I get a message that says "The requester resource was not found." What does this mean?

    Hi timtim89,
    Thanks for visiting Apple Support Communities.
    You may need to restore your iPhone after placing it in recovery mode. See this article for the steps:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Regards,
    Jeremy

  • HT4528 My Iphone 4s is plugged in charging after it has fully died. Instead of the apple appearing and staying constant on the screen...the apple is blinking. What does this mean and how do I get the phone to charge/turn back on.

    My Iphone 4s is plugged in charging after it has fully died. Instead of the apple appearing and staying constant on the screen...the apple is blinking. What does this mean and how do I get the phone to charge/turn back on.

    - Try:
    iOS: Not responding or does not turn on
    - Next try letting the battery fully drain. After charging for a least an hour try again
    - Last, make an appointment at the Genius Bar of an Apple store, it appears you have a hardware problem.

  • I tried to download the latest OSX Mountain Lion and got this notice - "We could not complete your purchase.  The product distribution file could not be verified.  It may be damaged or was not signed. "  What does this mean and why can't I download it?

    I tried to download the latest OSX for my iMac - Mountain Lion.
    This is the message that I received:
    "We could not complete your purchase.  The product distribution file could not be verified.  It may be damaged or was not signed."
    What does this mean?

    The only thing that worked for me was to boot in safe mode.
    Power down.  Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore. 
    No trouble at all once I did this.
    Reminder: create full backup before you upgrade OS
    Hope it helps.

  • TS4006 I lost my iPad. I located it using the Find My iPad feature. I got an e-mail from Apply stating it had been found. What does this mean? Does this mean someone used it, tried to use it or what?

    I lost my iPad. I located it using the Find My iPad feature. I got an e-mail from Apply stating it had been found. What does this mean? Does this mean someone used it, tried to use it or what?

    When you say an email from Apply, do you mean that the sender is named "Apply"?  If so, what is their full email address (e.g. [email protected])?

  • White screen with grey stripe down the middle. What does this mean?

    white screen with grey stripe down the middle. what does this mean?!!

    Nope, Happen when I was in the middle of texting. 40% battery life too

  • TS3297 Each and every time I try to buy a song I get "duplicate file" and it won't let me continue.  What does this mean?  I am not signed in to iTunes anywhere else.

    Does anyone have suggestions?

    Wow that was really quick, thank you so much.  Im not sure at all which version it was because i said it was around 4 years ago he bought it.  I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names.  isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
    So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
    either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
    sarucia

  • On the add-ons screen, I'm getting an indication that my Trend micro sofware is incompatible. What does this mean?

    When I open the add-ons screen, I get a faded out message that Trend-Micro NSC Firefox extension is incompatible with Firefox 4. Below it is another faded out message that Trend-micro toolbar is incompatible with Firefox 4.
    Do these messages mean that I'm not getting the Trend-Micro protection, or that I just can't open Trend-micro from within Firefox 4?
    I've been using Trend-micro for a long time, and I really like it.

    No that's wrong, the update for the trend micro toolbar will be issued the second week of JUNE 2011. How do I know this?
    http://esupport.trendmicro.com/solution/en-US/1058585.aspx%EF%BB%BF
    Says so there. Want more info?
    http://community.trendmicro.com/t5/Home-and-Home-Office-Forum/UPDATE-Toolbar-For-Mozilla-Firefox-4-0/td-p/32014/page/4
    Hope this helps, because I am one of the people as well with Firefox 4 and no Toolbar.

  • I am installing Windows 7 on my macbook pro OSX Mountain Lion and I get an error message:" Your disk could not be partitioned." What does this mean?

    I am installing Windows 7 and I get an error message: "Your disk could not be partitioned. An error ocurred while partitioning the disk". I was using a Windows & Home Premium OEM Software that I purchased from Microsoft. I was given to Windows 100GB to use for Quickbooks pro, Payroll and Publisher. I have the Macbook Pro model No: MD102LL/A. Does anyone knows what happenned or can advice me in what to do? Please help!!!

    amarilysfl wrote:
    "Your disk could not be partitioned. An error occurred while partitioning the disk".
    https://www.apple.com/support/bootcamp/
    If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
    Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
    Once it's completed, try creating a partiton again in BootCamp.
    If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
    reboot and attempt Bootcamp again.
    If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
    To fix this
    BootCamp: "This disc can not be partitioned/impossible to move files."
    How to safely defrag a Mac's hard drive

  • I cannot download Google or Yahoo toolbars. It says Firefox could not install file there is an error 203, what does this mean and what can I do to fix it?

    I have Firefox 3.6.16, I upgraded to Firefox 4 but there were many conflicts with Kaspersky so went back to 3.6.16 which is fine but I cannot get Google nor Yahoo toolbars to load. I have tried several times and the same thing happens. I have another computer that I did the same thing with but both toolbars loaded on it.

    See:
    *[[Unexpected installation error -203 when installing add-ons]]
    * http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox

  • Message I get when I turn on mac book pro.10.10.4 What does this mean?

    """distutils.pypircProvides the PyPIRCCommand class, the base class for the command classes
    that uses .pypirc in the distutils.command package.
    import os
    import sys
    from ConfigParser import ConfigParserfrom distutils.cmd import CommandDEFAULT_PYPIRC = """\
    [distutils]
    index-servers =
    pypi[pypi]
    username:%s
    password:%s
    """class PyPIRCCommand(Command):
    """Base command that knows how to handle the .pypirc file
    DEFAULT_REPOSITORY = 'http://pypi.python.org/pypi'
    DEFAULT_REALM = 'pypi'
    repository = None
    realm = Noneuser_options = [
    ('repository=', 'r',
    "url of repository [default: %s]" % \
    DEFAULT_REPOSITORY),
    ('show-response', None,
    'display full response text from server')]boolean_options = ['show-response']def _get_rc_file(self):
    """Returns rc file path."""
    return os.path.join(os.path.expanduser('~'), '.pypirc')def _store_pypirc(self, username, password):
    """Creates a default .pypirc file."""
    rc = self._get_rc_file()
    with os.fdopen(os.open(rc, os.O_CREAT | os.O_WRONLY, 0600), 'w') as fp:
    fp.write(DEFAULT_PYPIRC % (username, password))def _read_pypirc(self):
    """Reads the .pypirc file."""
    rc = self._get_rc_file()
    if os.path.exists(rc):
    self.announce('Using PyPI login from %s' % rc)
    repository = self.repository or self.DEFAULT_REPOSITORY
    realm = self.realm or self.DEFAULT_REALMconfig = ConfigParser()
    config.read(rc)
    sections = config.sections()
    if 'distutils' in sections:
    # let's get the list of servers
    index_servers = config.get('distutils', 'index-servers')
    _servers = [server.strip() for server in
    index_servers.split('\n')
    if server.strip() != '']
    if _servers == []:
    # nothing set, let's try to get the default pypi
    if 'pypi' in sections:
    _servers = ['pypi']
    else:
    # the file is not properly defined, returning
    # an empty dict
    return {}
    for server in _servers:
    current = {'server': server}
    current['username'] = config.get(server, 'username')
    current['password'] = config.get(server, 'password')# optional params
    for key, default in (('repository',
    self.DEFAULT_REPOSITORY),
    ('realm', self.DEFAULT_REALM)):
    if config.has_option(server, key):
    current[key] = config.get(server, key)
    else:
    current[key] = default
    if (current['server'] == repository or
    current['repository'] == repository):
    return current
    elif 'server-login' in sections:
    # old format
    server = 'server-login'
    if config.has_option(server, 'repository'):
    repository = config.get(server, 'repository')
    else:
    repository = self.DEFAULT_REPOSITORY
    return {'username': config.get(server, 'username'),
    'password': config.get(server, 'password'),
    'repository': repository,
    'server': server,
    'realm': self.DEFAULT_REALM}return {}def initialize_options(self):
    """Initialize options."""
    self.repository = None
    self.realm = None
    self.show_response = 0def finalize_options(self):
    """Finalizes options."""
    if self.repository is None:
    self.repository = self.DEFAULT_REPOSITORY
    if self.realm is None:
    self.realm = self.DEFAULT_REALM

    Hi MrConnors
    Honestly, I'm not sure what could be causing this. It looks like a python error of some sort. You said you get this when you turn on your Macbook, can you tell me anything else? Like what application do you see the error in? Maybe you can provide a screen shot? 
     

  • There is an "x" over my battery icon and even though it's plugged in it's still telling me that there is 0% battery life, what does this mean?

    My macbook all of a sudden crashed. When I turned it back on, the fan was running, the battery icon had an "X" over it, and although the power cord is plugged in and the light on it is green, the battery life is still saying that it is 0%. What is wrong with my computer!?

    Hi Jen.
    It appears that the battery is perhaps faulty. If you go to  -> About This Mac -> More Info -> Power, could you please tell us the Full Charge Capacity (FCC) in mAh, and the Cycle Count please.
    Also, you could try resetting the SMC, to see if that makes a difference.
    Good luck

  • I get a message that I ned to check proxy settings. What does this mean?

    The proxy server is refusing connections
    Firefox is configured to use a proxy server that is refusing connections.
    Check the proxy settings to make sure that they are correct.
    Contact your network administrator to make sure the proxy server is
    working.
    I cannot open firefox because I get htis message above. Don't know what to do.

    I can't see what version of Firefox you're using because you've deleted that information. So here are the settings for both.<br><br>
    For Firefox 4.0.x<br><br>
    * Click the orange Firefox button, go to Options | Options | Advanced | Network (tab) | Settings (button) and checkmark "Use system proxy settings" or "No proxy".<br><br>
    For Firefox 3.6.x<br><br>
    * Click Tools | Options | Advanced | Network (tab) | Settings (button) and checkmark "Use system proxy settings" or "No proxy".<br><br>
    If you choose "Use system proxy settings" which is the default, Firefox connects to itself which provides a certain degree of safety.
    "No Proxy" connects directly to the Internet.

Maybe you are looking for

  • ISE 1.2 Patch 2 External RADIUS Server Sequence Broken?

    Hi community, We have upgraded our proof of concept ISE 1.2 lab to Patch level 2. Our lab design includes the use of external RADIUS servers which we off-load certain authentication rules to. To ensure resiliency of the external RADIUS service, we ha

  • New iMac running 10.10.1 frequently pauses, way too slow

    I recently bought a 27 inch iMac, installed Yosemite, and migrated my files by time machine from a 5 year old macbook Pro running Snow Leopard. Since updating to 10.10.1, I frequently get the spinning beachball while I wait to continue, and everythin

  • Pls/portal shows: Error: The portlet could not be contacted  after SSL enab

    The OCS /pls/portal page shows: Error: The portlet could not be contacted, I believe this happened after SSL enabling the system. Anyone out there seen this errof before?

  • Export page file to html

    Wish export function to export to html file. It makes very fine pages easily in pages. One seen I do is export it as a pdf and correct in Photoshop or frireworks. Anyone else who wants the export function?

  • Managing Podcasts - Podcasts Mixed Up With Songs

    I know from viewing other posts on the forum that podcast management is not a strong suite of Apple right now. However, does anyone know if there is a way to NOT have podcasts mixed in with songs when selecting "Music, Songs" or "Music, Artist, All"