Getting a driver missing message when trying to load os

Good afternoon lads, I need a little bit of help. Just put together a new unit with a MSI 870A-G54 set to  Raid 1. When I go to load the OS 7 pro 64. I get an message that reads "A required CD/DVD drive device driver is missing. If you have a driver floppy, cd, dvd, or usb flash drive. Please insert it now". So been playing around with the thing. It recognizes a usb stick. I figure the easiest thing is to give it what it wants, the driver. The problem is since I am for the most part computer illiterate I have no idea what that driver is called and where to find it amongst the drivers on the disk. A little help would be greatly appreciated. Thanks guys and gals.

http://uk.msi.com/product/mb/870A-G54.html#/?div=Driver&os=Win7%2032

Similar Messages

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

    I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

    It could be that there's a new source of interference.
    Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
    http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
    By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

  • Just recently I am getting the following error message when trying to access web sites. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. It is an issue with some plug-in?

    Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?

    I have advised McAfee's product team of the problem and this thread, and they're looking into it now.

  • I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

    I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
    Thanks for your help in advance....

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

    I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
    tt2

  • On My Mac Pro Getting an unknown error message when trying to update apps

    On My Mac Pro Getting an unknown error message when trying to update apps To Perchase Mountain Lion

    Try signing out of your account, restart the iPad and then sign in again and see if that works for you.
    Settings>Store>Apple ID - tap your ID and sign out.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Sign in again -Settings>Store>Apple ID - sign in.
    If that doesn't work either, reset your iPad and see if that helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • TS3694 getting a 3014 error message when trying to recover my itouch. All PC software is currect, I have disconnected all USB ports and even turned off all security and still get a 3014 error. I got this after I upgraded to IOS 10.7.0.21

    I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.

    Did you try this:
    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.
    Also see:
    HT4061 error message 3014.: Apple Support Communities

  • I get the following error message when trying to instal in copy: "Creative Cloud Installer" can't be opened because the identity of the developer cannot be confirmed.

    I get the following error message when trying to instal in copy: “Creative Cloud Installer” can’t be opened because the identity of the developer cannot be confirmed.

    Mac Unidentified Developer Issue
    Here's how to open apps that apple should not be blocking: 
    http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

  • I get the following error message when trying to sync "could not be synced because the sync session failed to finish"

    hi just got a gift of an ipod touch model MD720LLA with operating system iOS7.1.2
    I get the following error message when trying to sync "could not be synced because the sync session failed to finish"
    what could be the problem
    have also uninstalled and re installed itunes
    thanks
    <Re-Titled By Host>

    Mac Unidentified Developer Issue
    Here's how to open apps that apple should not be blocking: 
    http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

  • Getting  an error 1 message when trying to restore iPad.  Any suggestions?

    Getting an error 1 message when trying to restore iPad 2.  Any suggestions?

    I too am getting the same error message.  Along with "We Could not complete your itunes store request.  The network connection was refused make sure your network settings are connected and your network connection is active"....im posting on this forum so how is my network not connected? 
    I am using the OSX Mountain Lion 10.8.3 on an iMac

  • Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

    Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

    Try the troubleshooting tips here:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
    You may have something in your project on one of the slides that is tripping up the publishing process.

  • Getting "line disconnected" error message when trying to monitor

    Getting "line disconnected" error message when trying to monitor "live stream" on cameras from computer.  Anyone else have this issue?  Any suggestions on how to fix?  I have reconfigured each camera with the router but still having the error message.  I have a total of three cameras....(1) is wired and (2) are wifi......I am getting this message with all cameras (both wired/wifi).

    Is this an intermittent error that you get now and then, or were you able to successfully setup your cameras, then one day you got the "line disconnected" on all cameras since that point and on?
    If this is an intermittent problem, I can share that I experienced the same thing the first two days of having setup my cameras.  It seemed that my Gateway was communicating with the Verizon servers pretty heavily as I was getting my HMC first setup.  However, starting on day three and on, it has worked very well.
    The only odd thing I'm experiencing now is that I getting several "camera_detected" messages in the activity logs.  All my cameras show up in the My Devices list, and I can view them either as a snapshot or as live streaming, however, the log makes it seem that there is a mystery camera connected somewhere that I don't know about.  I have a call in to Verizon regarding this and hopefully will get an answer in the next couple of days.  It's not hurting anything, just kind of annoying to sort through those entries as you're going through your Activity Log.

  • Why do I keep getting an "authentication failed" message when trying to join my network?

    Why do I keep getting an "authentication failed" message when trying to join my network?

    You may have to shut your computer off and pull the power adapter from both your ISP's Modem and your Router and wait 5 minutes and restart them in the following order.
    1st your ISP's Modem and wait a minute to get your signal and lights.
    2nd do the same with your Router and again you have to wait the minute.
    Last restart your computer and boot in OSX use Safari.

  • I keep getting an "Update Failed" message when trying to update my apps using Creative Cloud.

    I keep getting an "Update Failed" message when trying to update my apps using Creative Cloud.

    [ Mac 10.9.3 / Indesign CC update fail / Premiere update fail / Adobe Media Encoder 7.2.2 update fail ]
    Adobe Media Encoder was the problem for me. There's no separate uninstaller for AME. My ID CC and Premiere couldn't be updated (for the AME7.2.2 update as the only change). MCMHMPEGVideoCodec.framework seemed to be the factor.
    I uninstalled Premiere (only), after having manually removed MCMHMPEGVideoCodec.framework from inside AME. After boot I installed it again and voilà, both (ID & Premiere) updates went trough fine. The MCMHMPEGVideoCodec.framework was on place inside AME too.

Maybe you are looking for

  • Trying to recover Outlook 2010 contacts

    Trying to recover Outlook 2010 contacts and calendar from a HDD that cannot boot. therefore the .pst file cannot be exported. Is there a way to get the .pst and .ost files without actually running the Outlook program?

  • Order By clause problem with ENAME and Rownum?

    From Scott/Tiger user I run this query from EMP table. select rownum,EMPNO,ENAME,JOB from emp order by Ename; Output is like this ROWNUM EMPNO ENAME JOB 11      11     ADAMS CLERK 2      2      ALLEN SALESMAN 6      6      BLAKE MANAGER 7      7     

  • Can't print wireless from mp620

    I recently moved and have a new internet provider. I cannot figure out how to get my Canon MP620 all in one to function wirelessly. I've checked the communities archives and there was a similar question and answer but when I tried to follow the answe

  • Need help integrating flash with asp

    i am creating a dynamic site that pulls all of its content from and access database. i would like to make the entire page in flash. i have never used flash to pull any content from a datbase before. does any one know how to do this ? or know of a goo

  • Can i delete the new feature that shows your recent calls when double clicking the home button?

    Can the feature in the new IOS8 that shows your recent calls when double clicking the home button be deleted?