Getting a Dump in ST04 DYNPRO_FIELD_CONVERSION
Hi All,
We have an ECC 6.0 running on Oracle 10.2.0.2 and os is SUN - OS
When i go to ST04 i get a dump in the system
DYNPRO_FIELD_CONVERSION
Screen name.............. "SAPLS_ORA_COCKPIT_2"
Screen number............ 0001
Screen field............. "ST04N_DATA-DBUFF_BUSYWAITS"
Error text............... "FX015: Sign lost."
I have applied the note 1227629 manually
i.e In Structure ST04N_DATA i saw the following data elements were having length as 12. and it was increased to 16.
DBUFF_LOGREADS
DBUFF_PHYSREADS
DBUFF_PHYSWRITES
DBUFF_BUSYWAITS
DBUFF_WAITTIME
and after that in SE80 selected function group S_ORA_COCKPIT_2 under the screen 0001 changed the length from 15 10 16 for fields DBUFF_LOGREADS
DBUFF_PHYSREADS
DBUFF_PHYSWRITES
DBUFF_BUSYWAITS
DBUFF_WAITTIME
however we still have the error. Any pointers would be helpful
Regards,
Ershad Ahmed
Hello Rohith,
Thanks for the reply . I checked the note 1227629 its applicable from Basis Support pack 14onwards
and we are currently on 13 and the other notes 1137886, 1136458 tells us to increase the length to 16
and thats been done, The last note 1246251 shows a different Screen field
Screen field............. "ST04N_DATA-SHPL_CAQUAL"
Regards,
Ershad Ahmed
Similar Messages
-
Getting Short dump When Executing MIGO: SYNTAX_ERROR
Please Help,
I am getting this dump, when i hit MIGO transaction
Runtime Errors SYNTAX_ERROR
Date and Time 10.12.2008 08:28:03
Short text
Syntax error in program "MB_MIGO_BADI==================CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"MB_MIGO_BADI==================CP " in include
"MB_MIGO_BADI==================CM000 " in
line 0:
"The specified type cannot be converted into the target variables."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "MB_MIGO_BADI==================CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
MB_MIGO_BADI==================CP :
"The specified type cannot be converted into the target variables."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "DMATE"
Network address...... "140.1.1.141"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "dmate"
Database type..... "ADABAS D"
Database name..... "AD0"
Database user ID.. "SAPAD0"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Jun 23 2008 00:09:46"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQLDBC 7.6.0.018 CL 119055 "
Patch level. 166
Patch text.. " "
Database............. "MaxDB 7.6, MaxDB 7.7"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 40960
MM Used. 1627776
MM Free. 2559440
User and Transaction
Client.............. 040
User................ "LAKSHMI"
Language key........ "E"
Transaction......... "MIGO "
Transactions ID..... "EE72C6DDC96BF1F99FA4001143E563CA"
Program............. "CL_EX_MB_MIGO_BADI============CP"
Screen.............. "SAPLMIGO 0001"
Screen line......... 2
Information on where terminated
Termination occurred in the ABAP program "CL_EX_MB_MIGO_BADI============CP" -
in "IF_EX_MB_MIGO_BADI~INIT".
The main program was "SAPLMIGO ".
In the source code you have the termination point in line 1
of the (Include) program "CL_EX_MB_MIGO_BADI============CM001".
Source Code Extract
Line SourceCde
>>>>> method IF_EX_MB_MIGO_BADI~INIT.
2 CLASS CL_EXIT_MASTER DEFINITION LOAD.
3
4 DATA l_badi TYPE REF TO MB_MIGO_BADI.
5
6
7
8
9
10 TRY.
11
12 GET BADI l_badi
13 CONTEXT me.
14
15 CALL BADI l_badi->INIT
16
17 CHANGING
18 CT_INIT = CT_INIT.
19
20
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 1
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE
SY-MSGTY S
SY-MSGID VBDOCUBATCH
SY-MSGNO 001
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20081210
SY-UZEIT 082802
SY-XPROG
SY-XFORM
Active Calls/Events
No. Ty. Program Include Line
Name
4 METHOD CL_EX_MB_MIGO_BADI============CP CL_EX_MB_MIGO_BADI============CM001 1
CL_EX_MB_MIGO_BADI=>IF_EX_MB_MIGO_BADI~INIT
3 METHOD SAPLMIGO LMIGOGL2 54
LCL_MIGO_GLOBALS=>CLASS_CONSTRUCTOR
2 FORM SAPLMIGO LMIGOIN1 11
INITIALIZATION
1 MODULE (PBO) SAPLMIGO LMIGOPBO 11
PBO_INITILIZATION
Chosen variables
Name
Val.
No. 4 Ty. METHOD
Name CL_EX_MB_MIGO_BADI=>IF_EX_MB_MIGO_BADI~INIT
CT_INIT
Table[initial]
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
CL_EX_MB_MIGO_BADI============CP
4454554454444544443333333333334522222222
3CF58FD2FD97FF2149DDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-SUBRC
0
0000
0000
No. 3 Ty. METHOD
Name LCL_MIGO_GLOBALS=>CLASS_CONSTRUCTOR
SY-REPID
SAPLMIGO
5454444422222222222222222222222222222222
310CD97F00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LCL_MIGO_GLOBALS=>CNTL_ERROR
2
0
0
0
ABAP_FALSE
2
0
0
0
SYST-REPID
SAPLMIGO
5454444422222222222222222222222222222222
310CD97F00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
GOSEARCH_PO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TEXT-220
Dest
46772222
45340000
00000000
00000000
%_SPACE
2
0
0
0
%_TAG*TS_GOITEM
<initial>
<initial>
<initial>
X
X
5
8
0
0
LCL_MIGO_GLOBALS=>IF_BADI
F0000000
70008000
%_FL2*TV_GOFREIGHT
<initial>
<initial>
<initial>
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LCL_MIGO_GLOBALS=>T_BADI
Table[initial]
/SPE/CL_INB_ACTION_INFO=>C_DIALOG_MIGO
SCREEN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OREF_TITLEBAR
F0000000
F0000000
L_BADIS_1
0
0000
0000
SY-MSGID
VBDOCUBATCH
54444544544222222222
624F3521438000000000
00000000000000000000
00000000000000000000
OREF_TIP
F0000000
F0000000
TV_GOSERIAL-CX
<initial>
<initial>
<initial>
SPACE
2
0
0
0
SY-MSGNO
001
333
001
000
000
No. 2 Ty. FORM
Name INITIALIZATION
OREF_ARCH
F0000000
F0000000
LCL_MIGO_GLOBALS=>KERNEL
F0000000
D0002000
%_CX_TABLEVIEW_VERSION
0
3
0
0
0
GODEFAULT-DEF_XBOM
2
0
0
0
LCL_MIGO_GLOBALS=>KERNEL->C_REFDOCTYPE_MATDOC
MAT
445
D14
000
000
No. 1 Ty. MODULE (PBO)
Name PBO_INITILIZATION
GOITEM-UMWRK
2222
0000
0000
0000
GOITEM-UMNAME1
222222222222222222222222222222
000000000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
Internal notes
The termination was triggered in function "ab_genprog"
of the SAP kernel, in line 1551 of the module
"//bas/700_REL/src/krn/runt/abgen.c#10".
The internal operation just processed is "CPOP".
Internal mode was started at 20081210082802.
Program name.........: "MB_MIGO_BADI==================CP ".
Error message........: "The specified type cannot be converted into the target
variables.".
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=5776)
When : 12/10/2008 8:28:3.84
Threads : 2
Computer Name : DMATE
User Name : SAPServiceAD0
Number of Processors: 4
Processor Type: EM64T Family 15 Model 4 Stepping 1
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 14f0
FramePtr ReturnAd Param#1 Function Name
0000000007eb8800 0000000077d7047f 00000000411b4070 ntdll!NtWaitForSingleObject
0000000007eb88a0 000000000173b1d1 000000000000042c kernel32!WaitForSingleObjectEx
0000000007eb8af0 00000000006179c5 0000000000000001 disp+work!NTDebugProcess [ntstcdbg.c (501)]
0000000007eb8b20 0000000000b05d9c 0000000000000001 disp+work!CTrcStack [dptstack.c (182)]
0000000007eb8b70 0000000000b0afc0 0000000000000001 disp+work!rabax_CStackSave [abrabax.c (7093)]
0000000007eb9550 0000000000a51c94 0000000001d12320 disp+work!ab_rabax [abrabax.c (1231)]
0000000007ebc220 00000000007f753a 0000000000000001 disp+work!ab_genprog [abgen.c (1555)]
0000000007ebc2f0 00000000007f7dc8 00000000ffffffff disp+work!newload [abload1.c (336)]
0000000007ebc350 00000000007f7e8e 0000000000000056 disp+work!ab_LoadProgOrTrfo [abload1.c (160)]
0000000007ebc380 00000000007bc84d 000007fe725a5f70 disp+work!ab_LoadProg [abload1.c (78)]
0000000007ebc450 00000000007be91a 00002a441022f402 disp+work!LoadGlobalClass [abobject.c (943)]
0000000007ebc4a0 00000000007c1bdd 0000000000000000 disp+work!ab_FillCfix [abobject.c (1603)]
0000000007ebc580 000000000083ae52 0000000000000000 disp+work!ab_jaboo [abobject.c (2248)]
0000000007ebc700 0000000000a1ccb7 000000000000000d disp+work!ab_extri [abextri.c (554)]
0000000007ebc750 0000000000ad50ac 000000000000000d disp+work!ab_xevent [abrunt1.c (281)]
0000000007ebc7e0 0000000000679328 000000000000000d disp+work!ab_dstep [abdynpro.c (492)]
0000000007ebc960 000000000067d02d 000007fe725d6f20 disp+work!dynpmcal [dymainstp.c (2396)]
0000000007ebc9f0 000000000067ca2a 0000000000000000 disp+work!dynppbo0 [dymainstp.c (543)]
0000000007ebcaa0 00000000006395c5 0000000000000000 disp+work!dynprctl [dymainstp.c (360)]
0000000007ebfc30 00000000004dbc4c 000000000000000c disp+work!dynpen00 [dymain.c (1646)]
0000000007ebfeb0 000000000042f096 0000000007f62ff0 disp+work!TskhLoop [thxxhead.c (4538)]
0000000007ebfee0 000000000040108d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1136)]
0000000007ebff10 00000000019e84b1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000007ebff70 0000000077d5966c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
0000000007ebffa0 0000000000000000 00000000019e8340 kernel32!BaseProcessStart
State Dump for Thread Id b94
FramePtr ReturnAd Param#1 Function Name
000000000c9dfe40 0000000077d5f651 0000000000000000 ntdll!NtFsControlFile
000000000c9dfeb0 00000000018ce23f fffffffffffffffe kernel32!ConnectNamedPipe
000000000c9dff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000c9dff70 0000000077d6b69a 0000000077d6b660 msvcrt!endthreadex
000000000c9dffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
List of ABAP programs affected
Index Typ Program Group Date Time Size Lang.
0 Prg SAPLMIGO 0 04.05.2008 12:54:34 1561600 E
1 Prg SAPMSSYD 0 25.02.2008 17:02:32 21504 E
2 Prg SAPFSYSCALLS 0 09.09.2004 14:18:32 7168 E
3 Prg CL_MMIM_USERDEFAULTS==========CP 3 06.05.2002 10:42:38 21504 E
4 Typ ESDUS 0 01.03.1999 13:36:04 2048
5 Typ GOHEAD 0 07.02.2006 10:07:36 11264
6 Typ MKPF 0 25.08.2005 22:02:19 7168
7 Typ KBEFU 0 16.03.2008 17:46:49 6144
8 Typ LFA1 0 16.03.2008 17:47:20 22528
9 Typ MIGO_CUST_ACTION 0 30.11.1999 10:19:14 3072
10 Typ MIGO_CUST_REFDOC 0 30.11.1999 10:19:14 2048
11 Typ X031L 0 05.07.2005 13:10:15 6144
12 Prg SAPLSDIFRUNTIME 12 19.11.2006 16:35:34 96256 E
13 Typ DFIES 0 28.12.2004 17:06:45 10240
14 Prg SAPLSDNT 14 09.03.2008 19:02:04 219136 E
15 Prg SAPLSUGS 15 31.03.2006 11:23:11 47104 E
16 Prg SAPLV01D 16 24.03.2008 17:03:30 40960 E
17 Typ IWRKZ 0 04.04.1995 15:56:46 2048
18 Typ TCUCH 0 07.01.2002 15:50:54 3072
19 Typ TCUBN 0 07.01.2002 15:50:53 2048
20 Typ TCUWS 0 13.08.1997 13:57:58 2048
21 Typ TCUDRV 0 07.01.2002 15:50:54 2048
22 Prg SAPLVBDOCUBATCH_BF 22 16.01.2004 14:28:56 10240 E
23 Typ TCUDB 0 14.01.2004 10:05:59 2048
24 Prg CL_GUI_CFW====================CP 24 28.02.2005 21:03:09 168960 E
25 Prg CL_GUI_PROPS_CONSUMER=========CP 25 18.03.2008 13:25:33 29696 E
26 Prg %_CCNTL 25 18.02.2005 14:15:08 15360 E
27 Prg SAPLTHFB 27 18.03.2008 13:24:52 394240 E
28 Typ EUDB 0 06.11.2003 20:28:08 8192
29 Typ TCURM 0 01.03.2005 10:56:26 5120
30 Prg CL_EXITHANDLER================CP 30 18.03.2008 13:11:35 30720 E
31 Prg SAPLSEXV 31 18.03.2008 13:12:58 117760 E
32 Typ SXS_ATTR 0 07.02.2006 10:09:24 5120
33 Typ BADIISIMPLED 0 19.05.2005 19:10:34 3072
34 Prg CL_ENH_BADI_TOOL_UTILITIES====CP 34 17.03.2008 11:03:36 13312 E
35 Typ BADI_MAIN 0 08.12.2004 18:01:11 2048
36 Typ BADI_IMPL 0 09.12.2004 19:05:43 3072
37 Typ TADIR 0 07.02.2006 10:08:38 5120
38 Prg CL_SWITCH=====================CP 38 17.03.2008 11:13:47 19456 E
39 Typ SFW_PACKAGE 0 07.03.2008 12:18:16 2048
40 Prg CL_ABAP_SWITCH================CP 40 14.10.2006 15:40:30 33792 E
41 Prg SAPLPA_PACKAGE_SERVICES 41 18.03.2008 13:12:54 152576 E
42 Typ TDEVC 0 08.12.2004 18:02:41 6144
43 Prg CL_EX_MB_MIGO_BADI============CP 43 05.12.2008 17:09:58 30720 E
44 Prg IF_EX_MB_MIGO_BADI============IP 30 19.05.2005 19:30:39 14336 E
45 Typ SYST 0 09.09.2004 14:18:12 31744
46 Typ GOSEARCH_PO 0 20.07.2001 19:17:34 4096
47 Prg /SPE/CL_INB_ACTION_INFO=======CP 47 24.03.2008 20:30:06 20480 E
48 Prg /SPE/IF_CONST=================IP 47 14.10.2006 18:49:02 7168 E
49 Typ GODEFAULT 0 14.01.2004 10:04:46 5120
50 Typ GOITEM 0 07.02.2006 10:07:36 65536
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPLMIGO
SYST . . : : 00004612
\0\0\0\0\x0001\0\x0370\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0
GOITEM . . : : 00005524
00000000000000000000
GOSEARCH_PO . . : : 00000492
GODEFAULT . . : : 00000220
Program SAPLV01D
TCUCH . . : : 00000122
0401100020061029095148ANOOPJ 00000000000000
TCUWS . . : : 00000060
040020061227101454CONSULTANT
TCUBN . . : : 00000060
040020061227101454CONSULTANT
TCUDRV . . : : 00000064
00000000000000
Program CL_GUI_PROPS_CONSUMER=========CP
EUDB . . : : 00004068
%CAA72C6DDAD55F1179FA4001143E563CA \0\0\0
ABAP Control Blocks (CONT)
Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 Source Code Line
94 BRAX 01 FFEB CL_EX_MB_MIGO_BADI============CM001 15
95 CLEA 00 0020 CL_EX_MB_MIGO_BADI============CM001 15
96 EXCP 08 0000 CL_EX_MB_MIGO_BADI============CM001 22
97 BRAX 00 0005 CL_EX_MB_MIGO_BADI============CM001 22
98 EXCP 00 0007 CL_EX_MB_MIGO_BADI============CM001 22
99 BRAX 00 0003 CL_EX_MB_MIGO_BADI============CM001 22
100 EXCP 07 0000 CL_EX_MB_MIGO_BADI============CM001 22
101 BRAX 00 0001 CL_EX_MB_MIGO_BADI============CM001 23
102 EXCP 0B 0000 CL_EX_MB_MIGO_BADI============CM001 23
103 METH 01 0000 0000 0000 0000 0000 0000 0000 CL_EX_MB_MIGO_BADI============CM001 24
107 -
00 0000 CL_EX_MB_MIGO_BADI============CM001 24
108 ABOO 02 0000 0005 0000 CL_EX_MB_MIGO_BADI============CM001 1
>>>>> CPOP 00 0000 CL_EX_MB_MIGO_BADI============CM001 1
111 -
00 0000 CL_EX_MB_MIGO_BADI============CM001 1
112 METH 04 0000 0005 0002 0000 0003 0000 0000 CL_EX_MB_MIGO_BADI============CM002 1
116 PAR2 04 0000 C000 0000 CL_EX_MB_MIGO_BADI============CM002 1
118 PAR2 04 0000 C001 0000 CL_EX_MB_MIGO_BADI============CM002 1
120 PAR2 14 0000 C002 0000 CL_EX_MB_MIGO_BADI============CM002 1
122 PAR2 14 0000 C003 0000 CL_EX_MB_MIGO_BADI============CM002 1
124 PAR2 14 0000 C004 0000 CL_EX_MB_MIGO_BADI============CM002 1Hai,
Seems to be problem with the Program.
Please check the point 'What Happened' in the dump for more details.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"MB_MIGO_BADI==================CP " in include
"MB_MIGO_BADI==================CM000 " in
line 0:
"The specified type cannot be converted into the target variables."
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "MB_MIGO_BADI==================CP
You can also perform the syntax check from the ABAP Editor.
Take help from a ABAP consultant and try to check the syntax of the Program.
If you have access even you can check the syntax of the specified program from SE38.
Goto SE38 and put the program name and select 'Source code' and press F8, IN THE SOURCE CODE PAGE, press control+F2 and check whether there is any problem with the syntax or not.
If you find any take help from ABAP consultants.
Hope this helps.
Regards,
Yoganand.V -
Getting short dump at the time of loading data from R/3 to ODS
Hi BW Grurus,
I am trying to load data from R/3 to ODS, but after running for a few minutes it is getting into the short dump and displays the following run time error. So please give me solution how I can load data without getting short dump. I tried thrice but it is giving the same and failed.
Run time error : TSV_TNEW_PAGE_ALLOC_FAILEDHi,
Check, is start routine or individual routine in present in update/transfer rule?
May be read large amount data (select * from) another ODS and put into internal table cause these type of error.
Regards,
Saran -
Getting a dump while executing the standard report BUSCHDOC
Hi,
I am getting a dump while executing the standard report BUSCHDOC.
I am specifying the following values:-
Application Object : BUPA
Business partner:<some business partner>
Changed on: <some date>
Changed by:<some userid>
Below are the dump details
Short text
CREATE DATA: The specified type "BUSSRCH_401BUPAT" is no valid data type.
Any suggestions to avoid the dump are welcome.
Thanks,
RavindraHi Ravindra,
Can you execute report BUP_BUSSRCHGF_REPAIR and try again ?
Also, go to transaction BUS10, click the button Geneate Selection. On next screen, give Application object = BUPA, Max no. of tables per view = 1.
Regards,
Rishu. -
Getting Short dump due to large amount of data
Hi experts,
When we are running RALM_ME_MEASP_FULL_DOWNLOAD_SD program, every time we are getting Short dump due to large amount of data.
please suggest how to run this program without short dump.
Thanks & Regards
Prashant GuptaHi,
you do run the wrong APP I guess. The service you are running is for MAM20. If you are interested in MAM30 and MAM25, please use the correct service.
If you have a look for
*FULL_DOWNLOAD_SD
You find them all. Use the ones without the RALM in front - then the timeout should be solved as well. Bside that there is a great guid available that helps as well to solve some issues around server driven replication:
[MAM SERVER DRIVEN SETUP GUIDE|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/818ac119-0b01-0010-ba8b-b6e3f3490a63?quicklink=index&overridelayout=true]
Hope that helps to solve yourt issue.
Regards,
Oliver -
How can I get heap dump for 1.4.2_11 when OutOfMemory Occured
Hi guys,
How can I get heap dump for 1.4.2_11 when OutOfMemory Occured, since it has no options like: -XX:+HeapDumpOnOutOfMemoryError and -XX:+HeapDumpOnCtrlBreak
We are running Webloic 8.1 SP3 applications using this Sun 1.4.2_11 JVM and it's throwing out OutOfMemory, but we can not find a heap dump. The application is running as a service in Windows Server 2003. How can I do some more analysis on this issue.
Thanks.The HeapDumpOnOutOfMemoryError option was added to 1.4.2 in update 12. Further work to support all collectors was done in update 15.
-
How could i get the dump/restore utility?
I am newbie to arch, a stupid question
when i use FreeBSD or other Linux Distribution, dump/restore is always the standard utility
but i do not find them in pacman
how could i get the dump/restore utility?
thanksfukawi2 wrote:
Ranguvar wrote:dump and restore are deprecated in Linux IIRC. Other utilites are available. There's even a quote by Torvalds where he disses them
There's nothing wrong with the classics
I think so -
Getting sort Dump on select Query
Hi expert,
I m new in abap i m getting short dump on
*& Report ZREAD_ITAB *
REPORT ZREAD_ITAB .
TABLES : MARC,MARA,MAKT.
SELECT-OPTIONS S_MATNR FOR MARC-MATNR .
PARAMETER P_WERKS LIKE MARC-WERKS.
DATA T_MARC LIKE MARC OCCURS 0 WITH HEADER LINE.
DATA T_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
DATA T_MAKT LIKE MAKT OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
MBRSH LIKE MARA-MBRSH,
MEINS LIKE MARA-MEINS,
MATKL LIKE MARA-MATKL,
MAKTX LIKE MAKT-MAKTX,
SPRAS LIKE MAKT-SPRAS,
END OF ITAB.
SELECT MATNR WERKS LVORM FROM MARC INTO CORRESPONDING FIELDS OF TABLE
T_MARC WHERE MATNR IN
S_MATNR AND WERKS = P_WERKS.
IF T_MARC[] IS NOT INITIAL.
*this line)- SELECT MATNR MBRSH MEINS MATKL FROM MARA INTO T_MARA
FOR ALL ENTRIES IN T_MARC WHERE MATNR = T_MARC-MATNR.
endselect.
SELECT MATNR MAKTX SPRAS FROM MAKT INTO CORRESPONDING FIELDS OF
T_MAKT FOR ALL ENTRIES IN T_MARC WHERE MATNR =
T_MARC-MATNR.
endselect.
LOOP AT T_MARC.
READ TABLE T_MARA WITH KEY MATNR = T_MARC-MATNR.
MOVE :
T_MARC-MATNR TO ITAB-MATNR,
T_MARC-WERKS TO ITAB-WERKS.
READ TABLE T_MAKT WITH KEY MATNR = T_MARC-MATNR.
MOVE :
T_MARA-MBRSH TO ITAB-MBRSH,
T_MARA-MEINS TO ITAB-MEINS,
T_MARA-MATKL TO ITAB-MATKL,
T_MAKT-MAKTX TO ITAB-MAKTX,
T_MAKT-SPRAS TO ITAB-SPRAS.
ENDLOOP.
ELSE .
WRITE:/ 'NO DATA FOUND'.
ENDIF.
Please solve.
Regards ,
AshishHi,
In addition to above code, you need to place the mandatory check when using for all entries for checking the driver table is initial or not. If T_MARC[] IS INITIAL, all the entries from MARA will be selected.
IF NOT T_MARC[] IS INITIAL. "Mandatory check
SELECT MATNR MBRSH MEINS MATKL FROM MARA INTO CORRESPONDING FIELDS OF TABLE T_MARA
FOR ALL ENTRIES IN T_MARC WHERE MATNR = T_MARC-MATNR.
SELECT MATNR MAKTX SPRAS FROM MAKT INTO CORRESPONDING FIELDS OF TABLE T_MAKT
FOR ALL ENTRIES IN T_MARC WHERE MATNR = T_MARC-MATNR AND SPRAS = SY-LANGU.
ENDIF.
Thanks,
Vinod. -
Data mart data load InfoPackage gets shot dumps
This is related to the solution Vijay provided in the link What is the functionality of 0FYTLFP [Cumulated to Last Fiscal Year/Period
I encounter the problem again for Data Mart load that I created different initial load InfoPackages with different data selection and ran them separatedly that the initial data packet are messed up and whenever I try to creat a new InfoPackage, always get short dumps. RSA7 on BW system itself doesn't give the fault entry.
I try to use the program RSSM_OLTP_INIT_DELTA_UPDATE you provided, get three parameters:
LOGSYS (required)
DATASOUR (required)
ALWAYS (not required)
I fill in LOGSYS with our BW system source system name that's in the InfoPackage and fill in DATASOUR with the datasource name 80PUR_C01. But it goes nowhere when clicking the execution button!
Then I tried another option you suggested by checking the entries in the following three tables:
ROOSPRMS Control Parameters Per DataSource
ROOSPRMSC Control Parameter Per DataSource Channel
ROOSPRMSF Control Parameters Per DataSource
I find there is no any entry for 1st table with datasource 80PUR_C01, but find two entries in each of the 2nd and 3rd tables. I need to go ahead to delete these two entries for these two tables, right?
ThanksKevin,
sorry, I didn't follow your problem/question, but pay attention when you want to modify these tables content !!!
Since there is an high risk of inconsistencies...(why don't you ask for some SAP support in OSS for this situation?)
Hope it helps!
Bye,
Roberto -
Data load InfoPackage gets shot dumps
This is related to the solution Vijay provided in the link What is the functionality of 0FYTLFP [Cumulated to Last Fiscal Year/Period
I encounter the problem again for Data Mart load that I created different initial load InfoPackages with different data selection and ran them separatedly that the initial data packet are messed up and whenever I try to creat a new InfoPackage, always get short dumps. RSA7 on BW system itself doesn't give the fault entry.
I try to use the program RSSM_OLTP_INIT_DELTA_UPDATE you provided, get three parameters:
LOGSYS (required)
DATASOUR (required)
ALWAYS (not required)
I fill in LOGSYS with our BW system source system name that's in the InfoPackage and fill in DATASOUR with the datasource name 80PUR_C01. But it goes nowhere when clicking the execution button!
Then I tried another option you suggested by checking the entries in the following three tables:
ROOSPRMS Control Parameters Per DataSource
ROOSPRMSC Control Parameter Per DataSource Channel
ROOSPRMSF Control Parameters Per DataSource
I find there is no any entry for 1st table with datasource 80PUR_C01, but find two entries in each of the 2nd and 3rd tables. I need to go ahead to delete these two entries for these two tables, right?
Thankshey Paolo,
I tried RSSM_OLTP_INIT_DELTA_UPDATE, but there are two required input fields:
LOGSYS (required)
DATASOUR (required)
I fill in LOGSYS with our BW system source system name that's in the InfoPackage and fill in DATASOUR with the datasource name 80PUR_C01. But it goes nowhere when clicking the execution button! The LOGSYS value I input is correct by filling in with the BW system source system name in InfoPackage? Also I tried to run this program many times, a little better, but still abnormal. Maybe I need to try to delete the last two control table entries?
There is problem with giving reward points now with this website, I will give you reward points later.
Thanks -
I get a dump of HTML instead of a POPUPKEYVALUE contents while running app.
Hi, Many times I get a dump of HTML instead of a POPUPKEYVALUE contents while running the app.
If I reload the POPUP it fills with the choices as it should have.
I have had no complaints from Users though so I think it is just dev area.
HTTP/1.1 200 OKDate: Thu, 11 Sep 2008 21:58:00 GMT
Server: Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server
Content-Length: 22257
Content-Type: text/html; charset=UTF-8
etc...Hi John,
Actually I have had no complaints from anyone else about this. Just me.
It may be just in DEV mode?
I am the only one using Firefox because we do not officially support it even though I develop with it.
Haven't checked webserver logs, I'd have to find out who to contact.. I'm a contractor working from San Antonio and the servers are in Memphis.
It is random.. this morning I just accessed a table in Home>SQL Workshop>Object Browser-clicked Data--clicked Query and got what I was suppose to..
Yesterday when I posted this I would get to the data but as soon as I -clicked on "Query" I would get the dump. I tried several times and never got it to give me the "Query" selection form.
Using Firefox version 2.0.0.14
Thank you, Bill -
Hi Getting Abap dump when in RRP3 when deactivating the DP Planning area
Hi
We are using the Consumption group by this releasing Forecast to SNP at Customer level also along with product and location level,i am doing in dev only,
Issue :I have deactivated the DP Planning area(because of some modification) then activated/Initialized the DP Planning area, After that when I see in the RRP3 for the product it is getting Abap dump,CVCs now it is available also, Please let me know how to correct itKKK,
I doubt that the event of deactivating/reactivating the DP PA is the cause of your ABAP dumps in //RRP3. More likely the problem is related to a LC inconsistency, or a userexit.
Run all of your LC consistency checks, they are easy to do and quick to run. And, like any other dump, read the messages in the dumps to find out what went wrong.
Best Regards,
DB49 -
I meet a problem that firefox happens to crash, but i can not get the dump because it has been uploaded?
Is there any way I can get the dump(Not the raw dump)?This problem is not a pop-up. First of all the problem did not start until Yahoo changed their set up for ads in Yahoo Games.
Once it did start, the ads do not "pop-up", it is a vertical bar that is there all the time. You cannot get rid of it.
By the same token, it is not a Yahoo Problem since the problem does not exist using another server.
Yahoo says it has to do with some add-ons or plug-ins in Firefox that is causing the problem.
As you can see by the screen picture, one third of the game screen has a vertical ad area. I want to get rid of it. -
Hi ,
i am getting time_out dump when i am innerjoining MAPL and PLPO tables.
SELECT mapl matnr mapl werks mapl plnty mapl plnnr mapl plnal
plpo plnkn plpo zaehl plpo vgw04
FROM mapl INNER JOIN plpo ON
mapl plnnr = plpo plnnr
INTO TABLE ist_mapl
FOR ALL ENTRIES IN main_ltb
WHERE mapl matnr = main matnr
AND mapl werks = mainltb werks
AND vornr = '0010' .your problem is not related to the FAE, but to the join:
INTO TABLE ist_mapl
FROM mapl AS a
INNER JOIN plpo AS b
ON b~plnnr = a~plnnr
FOR ALL ENTRIES IN main_ltb
WHERE a~matnr = main matnr
AND a~werks = mainltb werks
AND b~plnty = ????
AND vornr = '0010' .
You need PLNTY? If you don't know it, then you can add
as list of all possible values
PLNTY IN ( '...', '...' ... )
it should help.
Siegfried -
RSCOLL00 OS collector job is cancelled and getting TIME_OUT dump
Hi...
Am using ECC 5.0 , In our PRD system progaram name RSCOLL00 OS collector job and its getting TIME_OUT dump for the particular job.
And i've seen that an error SQL error 3997 occuredin that job log.
And this are the dump following search criteria
"TIME_OUT" C
"SAPLSALC" or "LSALCU16"
"SALC_MT_READ"
pls do the needful ASAP.
thanks,
Gopinath.Hi Gopinath,
If your problem is still pending pls paste the complete dump message in this form so that we can give solution accordingly.
If you problem has been solved then mentions here complete dump message and solution which is applied by you.
Anil
Maybe you are looking for
-
Text wrap dialogue box is blank in CS3
I am not able to view the options in the text wrap dialogue box - why? I have restarted InDesign and my computer but there are no options showing in the dialogue box. I use text wrap all the time so this is a major problem for me. Thanks for your hel
-
I still have all my bookmarks so they are not lost (I can find them under 'bookmarks'>'Edit bookmarks' and also when I put them in the left side windowframe by clicking 'View'>'Sidebar'>'Bookmarks' I saw them appear once again in the dropdown menu bu
-
Import a Workflow using an XML file in Tcode SWDD
Hello, I have a problem in the workflow builder- Tcode SWDD: I am trying to copy workflow from one system (ECC 5.0) to another one (ECC 6.0) ? I use transaction Workflow-> Import/export->Export to xml files and import the xml files again, but the new
-
Using Function modules in BSP - Operations on Service Orders
Hi, We are creating a custom BSP application for scheduling resources and updating appointments for resource personnel. The process is as follows: From the list of Service Orders with some product added as line item, with status OPEN, the user select
-
Some fonts don't display properly
have a problem in IE9/firefox, today for some reason my browsers started having very bad font rendering, it's not all fonts but especially bolded fonts like the ones on youtube and on here, as if clear type decided to take a pass on those fonts, here