Getting a file not found error with jam pack instruments
Since Logic Express no longer works with the current Mac OS X versions, I'm trying to get used to using GarageBand again while I save up to buy the full Logic Package. I had purchased all of the jam packs years ago and recently also purchased Main Stage. Now, when I go to use, for example, an instrument from the Orchestral jam pack, I get a message saying "EXS24 instrument “Cellos.exs”: Audio file “VC-L_legato_f_C2.wav” not found!" with the option to continue or search again. Clicking "search again" always ends up with the same message. This is driving me nuts! Pretty ****** off right now that I can't use what I paid money for. Isn't this stuff supposed to "just work"? Or did that die with Steve Jobs?
same Problem: Working with OS X 10.6.8 on a MacBookPro Santa Rosa and Logic Pro: Its not possible to use the cello.exs 'cos missing audio file “VC-L_legato_f_C2.wav”, same problem with Basses.exs (missing KB-L_legato_f_A#1.wav) and the Piano. All this broken Instruments are from the Jam pack Orchestra Library.
Similar Messages
-
When i try to share a movie to idvd from imovie i get a file not found error
when i to share a movie from imovie to idvd i get a file not found error can anyone help?
Hey ninimac!
Here is an article that can help you troubleshoot this issue with burning DVDs in iDVD:
iDVD: Troubleshooting issues with burning discs
http://support.apple.com/kb/ht1583
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Quicktime gets a file not found error in running of set up. tried downloading twice
Quicktime gets a file not found error in running of set up. tried downloading twice
Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip 353 KB -
Getting "QueueConnection" file not found error in IOS
Hi All,
Iam using SUP 2.1 ESD #1, in have tried the sample SUP101Sample in IOS, but it is showing the "QueueConnectionu201D file not found error. can anyone help to resolve this.
Thanks,
B.UshasriCan I ask what version of iOS you are using? Have you been able to compile youre code?
Thanks
Ian -
I have been trying virus killers, malware software from microsoft, I uninstalled Firefox and reinstalled it, I used the option to change all my options to the basic default installed options, I am able to search without problems using Internet Explorer on all search engines, Google Search engine works in firefox browser; but all the links give the 404 file not found error. Links from my Gmail account do not work either...giving me the 404 error. Firefox is much faster than Internet explorer however, this link problem makes me wonder if firefox is really any good.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us! -
File Not Found Error with FlashHelp
When I deploy and launch my FlashHelp project I get a "Not
Found The requested resource was not found." error in the topic
pane. I'm also not able to reference any of the topics from the TOC
and get the same error.
I just upgraded to RoboHelp v6 and all of this worked fine
when the project was generated using the previous version of
RoboHelp (5).
Does anyone know what changed that might be causing the
problem?Hello,
I am having a similar problem. Did you find a solution?
Thank you,
Melissa
"arunak" <[email protected]> wrote:
>
Hi Pratim,
I am also facing the same problem. can u please let me know whenever
u get the
solution for this.
Regards,
Arunak
Pratim <[email protected]> wrote:
Hi,
I'm writing a web service on weblogic 8.1 with weblogic workshop.Ihave
to use log4j-1.2.7 supplied by client with my application.I cannot write
ant script manually.Also I cannot change server start script or cannot
put any command line argument when the server starts.
Now I require this logger in my EJB.I have kept log4j.properties inthe
same path where my EJB's are.But the final ear produced does not contain
this log4j.properties and subsequently I get the error "log4j:ERROR
Could not read configuration file [log4j.properties]."
Please help me to resolve this problem so that log4j.properties goes
with the final .ear file and the ejb code finds the logger.
thanks,
pratim -
File not found error with log4j.properties
Hi,
I'm writing a web service on weblogic 8.1 with weblogic workshop.I have to use log4j-1.2.7 supplied by client with my application.I cannot write ant script manually.Also I cannot change server start script or cannot put any command line argument when the server starts.
Now I require this logger in my EJB.I have kept log4j.properties in the same path where my EJB's are.But the final ear produced does not contain this log4j.properties and subsequently I get the error "log4j:ERROR Could not read configuration file [log4j.properties]."
Please help me to resolve this problem so that log4j.properties goes with the final .ear file and the ejb code finds the logger.
thanks,
pratimHello,
I am having a similar problem. Did you find a solution?
Thank you,
Melissa
"arunak" <[email protected]> wrote:
>
Hi Pratim,
I am also facing the same problem. can u please let me know whenever
u get the
solution for this.
Regards,
Arunak
Pratim <[email protected]> wrote:
Hi,
I'm writing a web service on weblogic 8.1 with weblogic workshop.Ihave
to use log4j-1.2.7 supplied by client with my application.I cannot write
ant script manually.Also I cannot change server start script or cannot
put any command line argument when the server starts.
Now I require this logger in my EJB.I have kept log4j.properties inthe
same path where my EJB's are.But the final ear produced does not contain
this log4j.properties and subsequently I get the error "log4j:ERROR
Could not read configuration file [log4j.properties]."
Please help me to resolve this problem so that log4j.properties goes
with the final .ear file and the ejb code finds the logger.
thanks,
pratim -
I am trying to execute a VI running on Linux from Teststand running on windows 2000 prof ,both running on two different machines.I used TCP/IP for the interface using the following steps on Labview VI:tools>options>VIserver>TCP/IP and gave the ip address of both the machines.When I gave the file path as c:\home\test.vi in Edit labview Vi call window(the Vi in linux is stored in /home/test.vi)and also in remote vi path:/home/test.vi,I get a file not found error.The teststand version is 3.0 and labview is 7.0.Any idea why this is happening and any solutions?
priya guru,
Here is a knowledge base that addresses your question: �How do I call test VIs that reside on a non-Windows platform from TestStand?�
You also need to set TCP/IP Access found in Tools->Options->'VI Server: TCP/IP Access'. Make sure that you list the IP address in the Access List to allow TCP/IP access to that machine. Finally you need to specify which VIs are accessible to remote applications. Open up Tools->Options->'VI Server: Exported VIs' and provide paths to the VIs you wish to be remotely accessible.
I have attached an example VI that demonstrates VI Server in action. Please post back if you are still having problems. Good luck!
Cr
aig H.
National Instruments
Attachments:
Remote_Run_--_VI_Server.zip 88 KB -
File not found, Error= –43
Everytime i try to make a new project logic pro does not accept audiophiles i use from other project-folders (File not found, Error= -43).
Even with the newest logic-version (10.0.7) and also a new mac book pro (moving via migration assistant) it does not work.Hi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS -
File not found error when opening securedoc.html
We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
The time after rebooting when it did work it pointed to file on my local computer hard drive:
file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!used bridge, didn't work.
tried right-click, double click..open in program.
same error.
files work in other adobe products.....
only way to get a jpg in there is to "paste" it in. -
WVC210 "File Not Found" error in IE9
When attempting to access a WVC210 camera using IE9, I get a "File Not Found" error. I've updated the firmware on the camera to V1.1.1.15, and have reset the camera to factory defaults. Under "Downloaded controls" in IE, it indicates that the Linksys210Viewer Control is enabled. I can assess the camera just fine using Firefox, but not with IE9.
I have had this exact same error on two different cameras. I installed the upgrade from a Windows 7 machinge on camera A. I can access the camera A from Windows 8 (with full functionality), mac and iPhone. But not Windows 7 (IE9). For camera B, I installed the upgrade using my Windows 8 machine. I can access the web interface for camera B from Windows 7, mac and iPhone, but NOT from the machine I installed from.
I believe this is a browser issue, and have not completed the troubleshooting. BUT, this should give you enough information to go into your IE9 and determine what may have changed. If you resolve before me, please post.
Thanks! -
File not found error 43 message. What is this?
I transferred a project to a friends logic and everything transferred fine except for the fact that every time we start the tune we get the notification: File not found, result code = -43. After we click through the first error code window another pops up and it says: Fade update failed, (error -43).
It is no big problem except for the fact that these come up every time we hit play. Then after we click through the error messages the song works perfectly.
Any ideas?
ThanksHi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS -
File Not Found error (-43) when trying to record
Never had this problem in the past, and haven't used Logic in a few months, but every time i attempt to record, i get that message: File Not Found, Result code error -43
I am using the MBox 2 Pro as my record in, and Logic 6.4.3
Thanks for the help...Hi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS -
File not found error on some computers running the same program
Dim pList As System.Diagnostics.Process
retval = 0
PTRName = "F:\myprogram.exe"
If My.Computer.FileSystem.FileExists(PTRName) Then
System.Disgnostics.Process.Start(PTRName)
pList = System.Diagnostics.Process.GetProcesses
For each proc As System.Diagnostice.Process in pList
If proc.ProcessName = "myprogram" Then
retval = proc.Id
Exit For
End If
Next
If retval > 0 then
'continue
Else
'error message
End If
End If
PTRName = "F:\myprogram.exe"
If My.Computer.FileSystem.FileExists(PTRName) Then
Retval = Shell(PTRName,4)
If Retval > 0 Then
'Continue
Else
'Error message
End If
End IF
I have created a program which:
opens a file
reads the records and massages the records
writes the records to a new file
Launches a program that uses the resultant file.
The program was written on Windows xp MCE using Visual Studio 10. The resulting program works fine.
I places The executable and the input file onto a flashdrive, and then tested it on other machines.
Two of the machines are both Win 7 Pro 64bit with .Net 4. On one machine it works great. On the other I get a "File not found" error when starting the second process. This is the failing code:
The problem is with the Shell command. When I rewrite it as:
it works on both machines
So my question is: Why does exactly the same code (The same flashdrive was used on both machines) work on one machine and not the other (when both machenes appear to be at the same level)?
In both cases I verify the file exists in the correct place before I try to start it.
Any help would be appreciated.
Thanks in advance
JohnThe use of F is just an example. I use:
OutputPath = My.Application.Info.DirectoryPath 'Where app is run from (root)
'Make sure the path ends in \
If VB.Right(OutputPath, 1) <> "\" Then
OutputPath = OutputPath & "\"
End If
to get the correct information.
Then
PTRName = OutputPath & "myprogram.exe"
BTW "myprogram.exe" is not the correct name it is just an example.
Sorry if this caused confusion
However all of this is not the point. If:
My.Computer.FileSystem.FileExists(PTRName)
is true then the file is in the right place. Therefore:
Retval = Shell(PTRName,4)
must also work. However it does not on some machines.
Is the problem in .Net, VB or VS because it is not in my code.
I have also used a routine similar to you (in VB6) to find a particular volume, but used the volume label. That worked better in my case.
John -
File Not Found bug with long audio file names?
Hello -
Crazy problem. I'll probably post way too much information, but I want to make sure I cover everything. Help!
We run Logic Studio/Logic 8 on multiple 10.4.10/11 computers - G5 Power PC, new intel iMac, intel mini, G4 laptops. We are working on an audio post job using very messy OMFs that were prepared in Final Cut. We had problems opening them in Logic, so we opened the OMFs in Soundtrack Pro, exported to AAFs, and opened those in Logic.
The sessions look fine in Logic now (all files relinked), and the session is consolidated - ie, all files are local/in the project folder's Audio Files folder. I see this in the Audio Bin and can confirm in the finder.
Here's the problem. With the sessions closed:
(A) I renamed the project folder by adding an asterix to the front of the folder name, and changed the color label of the folder in the finder in order to mark it as the original folder.
(B) I made a copy of the whole folder (session files & audio files) in order to have something to work from and not mess up the original. When I opened up the session in the new folder, it immediately said audio file not found, do you want to search, locate, or skip. It couldn't find the file in a search, and obviously when you skip, then skip, then skip all, it opens the session with the data (regions are there but grayed) - so all the audio files are orphaned.
So when I try to locate the file, here's what happens. . . The audio file names are really horrendously long (must be some artifact of working in Final Cut). We're talking: "1087-001A SERG AIRPORT WAITING * 1-1channel_00044D02AA9- 363A-4CC5-A86B-0741023DB062.aif" - one bazillion characters.
So the audio file locate dialog box truncates the name of the file that's missing by using the first 20 characters or so, and then a "#" character, and then some random string of 3-6 characters that is not at all related to the file name. So who knows which of the 4-30 SERG AIRPORT files is supposed to go there!
Obviously if this were a 2 minute session file of 10 files or something, we could figure it out and relink everything, but we're talking about a feature-length session with a bazillion files.
(C) Okay, so I tried to open the original session, in the folder that I had renamed by prefacing the original name with an * and changing the color of the folder. But I started to get the file not found errors. OH GEEZ. So I didn't save. I re-renamed the folder by taking out the * and changing the color label back. Then I tried to open the session again, but I still kept getting the file not found problem.
I have to stress that I didn't move any of the audio files, or change ANYTHING in the session.
So I thought - is all of this because I tried to open a new instance of the session, in a new instance of the folder? Is it because I renamed the folders? Normally you can rename folders, even session names, no problems, and Logic corrects the paths to the audio files!
(D) So, crap. I reopened the original AAF file in logic and saved it in a new place. I closed the file, reopened it, closed, reopened, just to make sure everything was working! I checked the location of the files in the audio bin, and everything was great.
(E) So now I copied the folders to an external hard drive to be able to work on another computer. But when I tried to open the sessions on a new computer. . . You guessed it, nada.
So. . . the questions are:
(1) Those original sessions that now will not work - is there anything I can do to recover their functionality? We had work in there that I would prefer not to lose. . .
(2) Is this a known bug having to do with the length of the Audio File names?
(3) How do we get over this? My only idea so far is we could select all in a working logic session and say "Audio Tracks names to regions" or something and will that change the actual file names on teh computer? Then hopefully things would work on mulitple systems. . .
Okay. HELP! Thanks!
PollyOK I got it.
It is necessary to use prefix "file:///" before file name.
Thanx everyway.
Maybe you are looking for
-
Family account for contacts but with same apple ID - iCloud use
Hi, I am writing to ask what the best way to setup a multiple contacts account using the same apple ID for iCloud. My wife and I both use the same apple ID for our iPhones as well as our iMac and iPad. I would like to be able to have my contacts on
-
How do I create a hyperlink from a tablet view to a desktop view in another muse site.
How do I create a hyperlink from a tablet view to a desktop view in another muse site. The page keeps redirecting to a table view in the 2nd site. There is no tablet view set up.
-
Issue in mapping Operation subcontracting scenario
Hi all, I will explain my scenario of subcontracting, i am getting issue when mapping the scenario in SAP. Scenario: For manufasturing 1 SF my client require 4 operations. All the raw materials required will be issued in the first operation. After fi
-
Inter module data transfer in FPGA
Hi everyone, i am working on a project in which i have PXI system with 8135 RT controller, 7854-R and 7951-R modules. I am having a PID loop VI running in 7854-R fpga card.The output if PID is sent to RT vi every 10 micro sec. In RT vi the values are
-
Hi Friends, I have a scenario like this, Plant A produces two products P1 and P2. Output of plant assume 50 MT(P1)and 60 MT(P2) respectively. Plant B,C and D consume these 2 products to produce thier own products. Plant B,C and D have individual pro