Getting a printed QR code to point to a specific page within my mobile site?

Hi All,
I'm createing a printed marketing campaign for my business and I want to direct a QR code to a page within my mobile muse site (not the home page).
I can change the url of the QR code but I'm unsure what the url path should be?
The page is called QR, so I thought that www.wearebrightlights.com/QR would work but I get a 404 error.
Here are the pages below. The QR code should link to the red page on the right, called QR.
Any suggestions?
Thanks,
Ben

That file will process a form that is submitted. If your contact page uses that file then the filename should appear somewhere in the contact page code.

Similar Messages

Problem while opening a link of a PDF that points to a specific page to another PDF

PDF links whose URIs include backslashes are interpreted by Acrobat Reader browser plug-in as local file-system links even when they are not. This means that a link that points to a specific page number will open the file but not automatically jump to the desired page . In our browser-based viewing tool, this means that the links are perceived as not working.
for example : from IE Browser When we tried to open the link in PDF 1 which has the URL of the 5th section of PDF2 and the URL includes the backslashes then the Specific section of PDF2 is not getting opened . The link just opens the PDF2 first page. This Specific problem does not arrives if we try to open the link through Adobe Reader or if the URL mentioned in the PDF is formed using forwordslashes instead of backslashes.
Regards
Yeshwant

> not sure if i have explained this very well.
You have not.
But tables cells cannot wrap.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"cheers mate" <[email protected]> wrote in
message
news:e7obon$nim$[email protected]..
> lets say i have a table one row deep and 10 columns
wide, and while
> viewing it
> your window may allow only 3 of the first tables at the
top and three on
> the
> next and three the next and finally one on the last.
(the number of boxes
> is
> not an issue)
>
> the way the tables are shown is.
>
> lets say the window is resized to allow 4 boxes in the
top row and so on
> down
> the page till all boxes are shown.
>
> not sure if i have explained this very well.
>
> if you do not understand please ask and i'll create a
few pages to explain
> what i am trying to do.
>
> i have seen this once or twice around some sites, but
this was ages ago
> and
> have no idea what sites so i can not look to see how
they did it.
>
>
> please take a look at this link i have described what i
am trying to do.
>
>
http://pro-freelancers.com/cascadingboxes.htm
>
> Hope someone can help.
>
>
> thanks
>

Indesign CS5 won't print specific pages within document

I'm working on Indesign CS5. The issue is with a specific document, and just started happening on version 11. All previous versions of the file have printed with no problems. I have so far determined that it is a document level problem as I can print other documents in Indesign with no issues. I have also determined which pages are giving me an error message: I can print all but one spread of this 16-page document. For example, it will print pages 1-9 and 12-16, but will not print 10-11. It gives it a try, and then gives me an error message box that just reads "error: " with no code or explaination. Any one else out there experienced this or know what's going on? There's no overset text, unlinked graphics or missing fonts, if that helps. Also, I'm working on a mac.
Edit: I have also already tried different print settings, and repasting everything into a new document that I created.

If that doesn't work, move the pages from spread to a new document so you can play without risking the file you have now. First, try to print the spread as-is, then if it doesn't print remove half the objects and try again. If the file prints without removing anything, then move all the pages fromthe old file to a new one and save with a new name, then try again. If you have to remove objects, there is probably a problem with one of the objects on the spread. You'll bew able to isolate it very fast by dividing the group of things that won't print in half, then dividing the half that won't print, and so on.

Print a page, email a page within a bc site

my client has property listings and would like users to be able to print the listing as well as email it someone else (ideally they would like to save a group of listings as well)

See also:
* http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
* http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings

Printer claim code, printer laserjet 600

Hi,
To get the printer claim code, I enter the IP address listed on the configuration page but I keep getting "problem loading page," so I cannot connect to the HP Embedded Web Server. I've triple-checked the IP address so I know I'm not entering it in wrong.
Please help.

Hi,
Please use the following setup to get claim code:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03550536#N304
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

[Printer Claim Code]

i want to register so i my be able to print pictures on my lap top. [accyn93enu52]

Hi cricket_1,
Welcome to the HP Support forums. I understand that you would like to learn how to set up the ePrint feature of your printer.
You didn't indicate which HP printer you have so the information I have will be general in nature. I have including the document on how to get your printer claim code as I suspect yours has probably expired. I have asked the Moderator to remove your claim code in the topic thread. After getting a claim code you'll want to setup your printer's ePrint email address. I've also included a document on how to do that.
Getting the Printer Claim Code
Setting Up a Custom Email Address for ePrint
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Where do you enter Printer Claim Code

Hello Jessie28893, Welcome to the HP Forums!
I understand you're wondering where to enter the Printer Claim Code. I will do my best to assist you! First, I need to find out what type of printer do you have? Click here to find out: Model Number.
Please follow this HP document on Getting Started with ePrint. You need to make an account with HP Connected to enter this claim code, as this document provides step by step instructions. The claim code will expire in 24 hours. If you need another claim code, please follow this HP document on Getting the Printer Claim Code
Let me know if you have any further questions. Have a great day!

CAN YOU HELP ME TO FIND OUT WHERE TO ENTER MY PRINTER CLAIM CODE

How do I link a reference point in one PDF to a specific page in a different PDF? I want it to open link in a new window AT the specific page.

I have a paper with multiple reference points that I need to link to 3 other pdfs. Each time I create a link in the master PDF, I need to open a file in a new window and point to a specific page in the other pdf. I cannot get it to work.

Hmmmm, just tried that and used the magnify glass to capture the specific page in the second pdf, but when I tried the link, it doesn't open a new window, it sits within the original pdf and I can't go back to the page I need to. What am I missing/
[email signature removed]

I can't get my printer to print out the claim code. HP7520-e All in one

Whenever I press the web icon on my printer, it gives me the printers email address, but there is no place to press to get it to print out a claim code.

I can't get my HP Photosmart 7520 e-All-in-One to print out the claim code, either. I have had problems ever since they switched from ePrintCenter to HP Connected.
This is my second HP Photosmart 7520 e-All-in-One, the first one quit printing and they said I would have to buy a new Printhead Assembly ($73.30), and throw away my partially used ink cartridges and buy new ones ($104 to replace my 5 HP 564XL High Yield Original Ink Cartridges!) It made more sense to buy whole a new printer for $200!
A. I found it at <http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03379963&lc=en&product=5199463&tmp... under FAQs !!!
Truncated piece: product=5199463&tmp_track_link=ot_search#N632>
See below:
=======================================================================================
What if I lose my printer code before registering?
If you lose your printer code before registering your printer, you can print a new information page to secure a new printer code. Use the following steps to disable and re-enable Web Services to print a new information page.
On the printer control panel, touch the Web Services icon (). The Web Services window opens.
Touch Settings, touch Remove Web Services, and then touch Yes.
Touch the Web Services icon () again. The Web Services window opens.
Touch Settings, and then touch Enable Web Services.
Touch Yes to accept the terms of use. The printer prints an information page.
If the printer does not print an information page, touch Print Report.
NOTE:The information page contains the printer claim code that you use to register your printer.
=======================================================================================
It printed out a page titled: Make the Most of Your Printer
The printer's claim code is in item number 3.

I can not find the printer email/code to get more apps on my Photosmart Plus B210

My printers App section has the "get more" button and it directs me to HPePrintCenter.com , so I doubt it isn't compatible. However, when I follow the directions to get the printer's email/code the Wireless Network Test Report that prints automatically when I re-establish the wireless connection there is no information suggesting the printer has such an address.
I am absolutely lost as to how to get this code now.
Any help would be appreciated. =D

I bought a HP Officejet 6500A Plus e-All-in-One. setup was quick and easy and nothin went wrong as far as I know. my problem is that I cant add a printer in my account at the hpeprintcenter because it asks for a printer code. It says my printer should of printed it out after the setup. that didnt happen. so now i cant find it and dont know where to look. the only icons on the display of the printer are the fax setup wizard, wireless network wizard and an icon called 'Discovery'. within discoery there are icons named eprint, and web app and two others i cant think of. when I click on one of them, it doesnt bring up options for settings, it just brings up little 'animations'. what should I do? is there a way to restore the printer completey and start again? or any other solution? It's connected via wireless if thats relevant. Thanks for your help!

How to print BAR code in SMART Form

Hi All,
I have the requirement to print BAR CODE in Smartforms.
For this, I create a character format with Bar code in style forms and create a text element in Smart form and associate bar code character format with this text element.
Now when I look the print preview for the data, then it shows me data in bar code format but not in right format i.e. its shows me all the similar block in bar code.
If you look the bar code in SAP script, its always show you bar code with similar block, but in SMART FORM it will show you exact bar code; as in SAP Script, bar code is generated at printer end and in SMARTFORM bar code is generated as graphic in SAP and then sent to printer for print.
PLease let me know, why in SMARTFORM its not showing BAR CODE in correct format in print preview.
Thanks
Piyush Mathur

Hi,
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
reward if useful
regards,
ANJI

Get default printer in ABAP program ....

Hi gurus, pls help me ...
     I had a program to print voucher. It show document list, and user can choose some document to print (smartform). Now, if I choose 5 document, I have to choose printer 5 times. Who can tell me the way to get default printer of the desktop which user's using to assign OUTPUT_OPTIONS or something like that!? Thanks for all.

hi,
Please refer the code elow..u should be able to crack this roblem..
data: l_usr01 like usr01.
CALL FUNCTION 'GET_PRINT_PARAM'
    EXPORTING
      I_BNAME = sy-uname
    IMPORTING
      E_USR01 = l_usr01.
output_options-TDARMOD = '1'.
output_options-TDDEST = l_usr01-spld.
output_options-TDRECEIVER = sy-uname.
output_options-TDCOPIES = '1'.
output_options-TDIMMED ='X'.
output_options-TDDELETE = 'X'.
output_options-TDLIFETIME = 0.
output_options-tdnoprev = 'X'.
output_options-tdnoprint = space.
output_options-tddelete = 'X'.
Please, assign points, if u have found it useful..
Thanks,
Nivin

Req: Example of report sending a printer escape code

Hello, I have a batch report that prints student transcripts. After a transcript, I need to tell the printer to staple.
Please point me to an example of sending a printer escape code.
By the way I'm printing from Win98 to a Konica 7055 using the postscript driver.
Thanks!
Gary C. Whitaker
St. John Health System
Information Systems
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
hello,
i have in trouble in same kind of problem if you able to get ride off this problem please help me.
i have designed a charachter mode report that require a page size height 66 and width 132 portrait mode to print,
i need to print this report on a generic printer, i have tried various generic printer defination files that are shipped with oracle reports, but the printer prints it according to the page size of height 66 and width 80 becuse of which data gets truncated, however if i send the output a file then it is correct.
Any body please could tell me what i should do, i am gone blank?
Thank you in anticipation of reply.<HR></BLOCKQUOTE>
null

Get default printer share name

Can someone give a code snippet of how to get the default printer share name?
I'm able to get the printer name with the following but can't get the share name.
    private void listClientPrinters(PrintService[] pServers) {
        for (int i = 0; i < pServers.length; i++) {
            javax.print.PrintService ps = pServers;
write_message("Client Printer "+i+": "+ps.getName());
}Thanks,

hi,
Please refer the code elow..u should be able to crack this roblem..
data: l_usr01 like usr01.
CALL FUNCTION 'GET_PRINT_PARAM'
    EXPORTING
      I_BNAME = sy-uname
    IMPORTING
      E_USR01 = l_usr01.
output_options-TDARMOD = '1'.
output_options-TDDEST = l_usr01-spld.
output_options-TDRECEIVER = sy-uname.
output_options-TDCOPIES = '1'.
output_options-TDIMMED ='X'.
output_options-TDDELETE = 'X'.
output_options-TDLIFETIME = 0.
output_options-tdnoprev = 'X'.
output_options-tdnoprint = space.
output_options-tddelete = 'X'.
Please, assign points, if u have found it useful..
Thanks,
Nivin

How to Get the Print of General Ledger with Opening balances

Hi Friends.
How can I get the print out of G.Ledger with all line item transactions and opening balances in a company code?
Please explain.
Regards.
Srini

hi
for line item-
goto s_alr_87012282 and select menu bar "list">print
for g/l statement
goto s_alr_87012332 same step above
rgs

Getting a printed QR code to point to a specific page within my mobile site?

Similar Messages

Maybe you are looking for