Getting a Raw Image in View Mode?

In one of my Projects, I see all the images in the browser. But double clicking on any of them doesn't expand them.
Yet in an another Project, I can click on an image and get the normal View, or can expand to full screen.
What controls effect a viewed image?

Problem solved. I went to the VIEW menu in the menu bar and played around. Everything working.

Similar Messages

I just got a white frame in the middle of my images in viewer mode. What is it and how did it get there and how do i get rid of it.

I just got a white frame in the middle of my images in viewer mode in Aperture 3. What is it and how did it get there and how do i get rid of it?

Just fishin' ...
Is by any chance "View→Show focus points" checked?
Does the frame persist after closing and re-opening Aperture?
Notice anything else different?
To post a screen shot, you first take it, them upload it. To take them, I use and recommend Skitch -- one of the best little apps ever. But this ability is built into OS X. Use Grab or Preview (search OS X Help for full directions). In Preview, use "File→Take screen shot ... →From selection ... ". Save the file in Preview to your drive. In the Discussion forum click the "Insert Image" icon (a camera) and select the file you created in Preview.

How do I get a raw image from "My Pictures" into Photoshop?

How do I get a RAW image from "My Pictures" into Photoshop? When I send it to Photoshop , it shows up as a grey checkerboard. The title is on the top. Whe I try to send a picture from Camera Raw, it does the same thing.

Has it ever worked or is this just something that started happening recently?
Have you tried resetting the photoshop preferences file?
http://forums.adobe.com/thread/375776?tstart=0
Have you installed the latest updates for photoshop cs5?
In photoshop cs5 go to Help>Updates
To post the system info here on the forum it might depend on your browser, but using firefox as an example, you would open the system info in photoshop, press Copy then OK.
Here on the forum you would press the ctrl key and paste.

Any way to get frame accurate in icon view mode?

Does anyone know if there is a way set frame accurate in points in icon view mode? I know that if you are "hover scrubbing" a clip, and then click on it you can use the JKL keys to shuttle through the footage. But is there any way to go frame-by-frame through the footage as well?
I ask because I have a 4-camera shoot where the clips were synced by a slate clap. I'd like to make a multicam clip from the shots so am going through and setting the "clap" as the in point of each clip, and then using them as sync points for the multicam clip. I hover scrub to the general area of the slate clap (works great) then use the JKL key to narrow in "clap" even more (also works great). However, it is nearly impossible to stop exactly on the frame where the slate hits using the JKL keys. So I would like to get in the general vicinity using JKL, and then use some other keys or method to get to the exact frame of the "clap". One would assume that the arrow keys would do this, but they don't.
Does anyone know if there is a way to accomplish this? Thanks in advance for any help.

I understand your point, and it never ocurred to me that I part of my normal workflow when doing things like that to more than a few clips is to select all of the clips and put them all in the Source Monitor with a single command. (Select them all, right click, and select "Open in Source Monitor".) So I don't go back and forth between windows. I guess I have been doing it so long I missed that step in the explanation. Sorry about that. Also, please understand that I skipped CS4 and CS5 so when I started using CS6 I have never really been comfortable with the hover scrub for anything serious. Not yet anyway.
I figure that all of the clips will end up in the Source Monitor anyway before they hit the timeline, so why not put them up there and as I finish with each one I close that window and start on the next one.
Those of us who go back to when Premiere became Premiere Pro have been waiting for some of these features a very long time. Slap-your-head it might be to you or me, but Adobe only has so much money to pay engineers and there is always something more important to work on. Like becoming codec agnostic or handling huge frame sizes. Adobe has borrowed many features from FCP, but it is still a work in progress. We just submit feature requests and attempt to convince others to do the same. You can't imagine how much time we spent a decade ago getting people to create the proper sequence. Now you just drag a clip to the New Item button and your sequence is perfect. That is magic to someone like me, who taught people how to use Premiere Pro 1.5 by copying FCP tutorials and recreating them in Premiere Pro (for Lynda.com) using the same footage.
Jim Simon is often quite vocal about things he would rather see done that some of the requests. I agree with him most of the time, but every now and then a little thing I think should be done is not on his list and he will let me know in no uncertain terms why he thinks what he thinks. He can be pretty persuasive and it is difficult to argue with his logic. The Adobe folks read these forums, yes, but they read the feature requests and look to see how many customers want certain things done. Not a bad way to prioritize. Now that more FCP people will be submitting requests, there is a good chance that you will see more features that you want.
So, while it may be obvious to you, it isn't obvious to Adobe until the masses speak. I suggest that you might want to consider being a rabble rouser, getting like minded people to put in the same requests. That is probably the best way to get what you want.
As for going in reverse.... I think that if you have never had some of these things, they are not important to you. They are not all like adding reverse. Some are but some of these are like the tailfin on the 1959 Caddilac. The higher the better back then. But are they necessary?

Can't get my RAW images to open up in elements 9 from my new 5d mark 3 Camera!

I never had problems opening my RAW images from Canon 5d Mark2 but for some reason, they won't open from my new canon 5d mark 3 camera. A pop up box comes up that says, cannot open file "........." because it is the wrong type of file. Can anyone help as to what I can do???

Hi,
The 5D mark III requires ACR 6.7 or higher - PSE 9 can only goes as far as ACR 6.5.
You need to update to a newer version of PSE or use the free DNG converter to turn the CR2 files into DNGs which can then be read by PSE9.
Brian

How to I get to the STandard Design view Mode

Don't have a manual and trying to find out how to switch
modes to standard design view instead of layout mode?

> I have dreamweaver
> 3
dw3 doesn't have a "Layout Mode" That was introduced with Dw4
AFAIK.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

How can i get my raw images that are already on my computer into photoshop elements 9?

Please help

In Elements Organizer go to >File >Get Photos and Videos >From Files and Folders...
Juergen

Images in design mode don't draw their source from the correct directory?

I'm using flex builder 3 in os x. I've only recently started
using flex but this seems pretty odd. In design mode I drag an
image onto a panel. It starts out with no source, so of course it's
a broken image icon.
If I put my image into the 'bin' directory then I have to
enter the source of the image as 'bin/image.jpg' to make it show up
in the design view. But then when I 'Run' the project the image is
broken.
If I enter the source as 'image.jpg' then it doesn't show up
in design mode, but it does show up when I run the project. Thus it
appears that in design mode the 'current' directory is the main
project directory whereas when starting the project the main
directory is the 'bin' directory where it creates the swf.
The only way I can make this work reasonably well seems to be
to put the image in both the main project AND in the bin directory
by hand. Of course that's a maintenance nightmare.
What am I SUPPOSED to do? (other than embed the image in the
swf)

I always have this damn problem and I'm getting very tired of
it. And I AM embedding my images using [Embed] - same situation
still. I'm doing exactly what Adobe says to do for embedding images
here:
http://www.adobe.com/devnet/flex/quickstart/embedding_assets/
Still, it finds the assets when I run, but all I get is
broken images in design mode.
Design mode is broken in FB3. I don't remember what crazy
things I tried to get past this problem in the past, but I'm worn
out troubleshooting design mode path problems... image assets,
fonts, css, whatever. There is a bunch of threads in this forum
with people having similar issues, with no responses. I've spent
alot of time researching and troubleshooting these kinds of
problems - probably hours worth.
Adobe, what is the story with Design mode?

Copy of Raw Images

I burned a series of RAW images to DVD on my Mac and then read them into Photoshop on my PC. Although all the images are RAW on the Mac, the copied as jpeg's to the DVD.??? How do I get the RAW images copied as RAW images?
Chuck

So what happens when you try? If there is an error message, please quote the complete error message, word-for-word, verbatim, leaving nothing out (or show us a screen capture).

MacBook Pro Retina "Gets Hot when viewing RAW images"

MacBook Pro Retina Gets really Hot when viewing RAW images - somebody has this issue? Solutions?

Welcome to Apple Support Communities
First, download Temperature Monitor and tell us the temperatures of the MacBook > http://www.bresink.de/osx/TemperatureMonitor.html
The MacBook Pro with Retina display is made of aluminum, so it's normal that it gets hot. However, if the temperature inside is very high, fans will turn on automatically. If this doesn't happen, it may have a hardware problem

How to get Aperture and iPhoto to use Pentax *ist DL RAW images natively

Using some techniques that I found in various places in these forums, I am going to give step-by-step instructions to get Aperture and iPhoto to recognize Pentax *ist DL RAW images natively.
Note: This worked for me using 10.4.6 with the latest iPhoto 06 and Aperture updates. I do NOT know if this will work on older versions of OS X, iPhoto, or Aperture.
Note: If you also use a Pentax *ist DS camera, these instructions will probably disable support for that particular device due to the modifications made to a system file. Only complete these instructions if you want to use a *ist DL camera.
** These instructions involve modifying system level files using a HEX editor. If you are not comfortable with this, do NOT attempt to do this or you could kill your system. Remember, BACKUP BACKUP BACKUP. These steps worked great for me but follow at your own risk!! **
Ok, lets begin...
1) Download this great patch by macintosh_tech
http://idisk.mac.com/macintosh_tech-Public
This patch contains an updated raw.plist file which includes the RAW information for the *ist DL. This patch also contains an updated libRaw.dylib file and an updated Raw Presets file for Aperture.
** Do NOT copy the libRaw.dylib file from this patch to the folder listed in the patch Read_Me. This file did not work on my Intel-based Mac and crashed my system!!
I was able to modify my original libRaw.dylib file using a HEX editor to get it to work on my system. Instructions for this modification will follow.
2) Open the .dmg of the patch in a Finder window
3) Open a new finder window and browse to /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ImageIO.fra mework/Resources
*4) Backup the libRaw.dylib and Raw.plist files. Copy them to a safe location. For extra safety, you can just copy the whole Resources folder to a safe location (Make sure that you COPY it and dont MOVE it)*
5) Right-click the libRaw.dylib file and select "Get Info". Look at the bottom of the info window and expand the "Ownership & Permissions" tab. In this section, expand the "Details" tab. If the lock icon is in the locked position, click it to unlock it. Change "Owner" to your user name. If requested, enter your system password at this point. Close the info window. This step lets you modify the libRaw.dylib file.
6) Complete step 5 for the Raw.plist file.
7) Copy the Raw.plist file from the "Place In System Folder" folder from the patch to the Resources folder. It will ask you if you wnt to overwrite the existing file. Click "Replace".
8) Open a new finder window and browse to the /Users/YOURUSERNAME/Library/Application Support/Aperture/ folder.
* 9) Backup the "Raw Decode Presets.plist" file *
10) Copy the "Raw Decode Presets.plist" file from the "Place In Home Directory" folder from the patch to the /Users/YOURUSERNAME/Library/Application Support/Aperture/ folder. Click "replace" if it asks you.
11) Here's the tricky part. Download a HEX editor if you don't have one. I used 0xED. It is free and can be downloaded from
http://www.versiontracker.com/dyn/moreinfo/macosx/29521
12) Open the libRaw.dylib file from the Resources folder in your HEX editor.
Note: This is your original libRaw.dylib file from your /System/Library/...../Resources/ folder, NOT the file from the patch.
Use the Find function and search for the string "Pentax *ist DS". Make sure you are using "Search Type: Text" (or equivilent in your editor) and that you use proper case. When you find this string, change the "S" in the "DS" to an "L". The string should now look like "Pentax *ist DL". Use the "Find Next" function to find the next instance of "Pentax *ist DS". Again, change the "S" to an "L". There should be two total instances that you need to change. Save the file and exit the editor.
13) Open Disk Utility and repair permissions. This will set the raw.plist and libRaw.dylib files back to their original permissions.
14) Reboot the system.
15) You should now be able to view .PEF files natively in Aperture and iPhoto. I appologize in advance for any typos. Let me know how this works, as this is my first tutorial of this nature.
Macbook 2.0 Mac OS X (10.4.6)

It would appear that my last post was a moot point as the 10.4.7 update adds support for the *ist DL. It's nice to have it biult into the operating system now.

Cannot view raw images in iphoto 11

Hi there, I have just upgraded to a new imac running Mountain Lion and iphoto 6.
Now I can't view the latest raw images I have taken (on my canon eos 550D) - When I scroll through the images they appear for a second or so, then they disappear and are replaced with empty boxes with dotted lines around the outside, when I double click on them, I get an exclamation mark inside a triangle.
?? Any idea why this is happening? I saw that my camera is one that is supported by iphoto so am confused as to why this is happening.

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders in Library view does not show images correctly: If there is a folder with sub-folder(s), the folder will indicate 0 images, but the sub-folders show the proper number of images. What happened and is there a fix? I tried uninstalling Lightroom and re-installing, but problem persists.
Here is a screen shot of the error message:
Message was edited by: Joseph Costanza, Jr.

See here for a solution.

Viewing RAW images in full screen - problem

I have begun to shoot some images in RAW mode with both my Nikon D70 and Nikon D200 - NEF format. I edit in Photoshop Elements, from withing iPhoto so that edited images are saved back to iPhoto.
When I view edited images in full screen mode from iPhoto, the edited version will be shown briefly and then the unedited version pops up. Anyone know what this is all about and can it be stopped?
Also, I am wondering why, when I right-click on a RAW image in iPhoto, one of my choices is "Reprocess RAW" whether I have edited it or not. And there is no choice to "Revert to original" as in non-RAW images.
Marion

I think you are referring to minor color and other editing done within iPhoto. I am talking about cropping and other major editing done in Photoshop Elements. This edited RAW image, by default, is saved back to iPhoto - but NOT as JPEG - where I can view it along with other RAW images I have not processed in any way.
Yet, both edited and unedited images offer me the same option when I right click for the contextual menu - "Reprocess RAW." This is the place where "Revert to Original" appears when this menu is accessed from a JPEG image.
When I use iPhoto edit, which I almost never do, it does indeed save the image as "JPEG image (from Nikon RAW)." And indeed I do then have the option to Revert to Original.
Reprocess RAW works in the same way as Revert to Original. It was just mysterious to me why I was offered the opportunity to redo something I'd not done in the first place.
Thanks for your help.

How to view the Nikon D4 RAW images in Bridge CS3

I am in the process of buying the lattest Nikon camera the D4. However, I am still using CS3. I am wondering if I am still going to be able to view and process the RAW images in Bridge? Will I need a plug in? If so, where can I download?

I am wondering if I am still going to be able to view and process the RAW images in Bridge?
No, according to this overview:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
the earliest support for Nikon D4 is ACR 6.7, the latest and last update of the Camera raw plug in that came with PSCS5
Will I need a plug in? If so, where can I download?
You can use the DNG route, meaning downloading the free DNG converter from Adobe and those DNG files will be viewable in CS3 and you can work with them.
Windows: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
Mac: http://www.adobe.com/support/downloads/product.jsp?platform=Macintosh&product=106
While it is none of my business I just wonder why you buy a 5K $ state of the art top dSLR from 2012 and still use an 'old' piece of software released in 2007 to try and get the most out of it.
And sadly enough CS3 Bridge is known to be the worst version ever, you sure will benefit from at least CS5 but CS6 offers the new 2012 Process in ACR.

Getting a Raw Image in View Mode?

Similar Messages

Maybe you are looking for