Getting a Sharing Violation using CS3 when saving/refreshing our Windows 2008 box

To be clear, this is NOT an IE issue as I don't use IE at all in development. This is a ColdFusion 10 environment. I'm fairly sure this a Windows/IIS configuration issue.
Basic Info:
This error happens while on XP or Windows 7
This error does not happen when interacting with any other environment.
Scope of issue:
I work on both a Windows 7 and XP environment (2 laptops). I run both CS3 and CS5.5 on both machines. I have no problem whatsoever working with any linux or windows servers running a mix of ColdFusion 7 and 8. Recently our IT group brought up a Windows 2008 server running ColdFusion 10. This is the ONLY server I have this issue with and switch servers often depending on project. It MUST be either the ColdFusion 10 configuration or something with Windows/IIS. Our IT group is unable to resolve this issue on their own.
Here is what happens.
I save the file, then, if I view it with ANY browser (firefox, chrome, IE... etc) the file will generate a sharing violation if you attempt to save it again within 15-20 seconds. Past that point, it will save fine. No other server displays this behavior.
So what has been done so far?
ColdFusion:
- On settings, class files are NOT being saved and all saved templates are set to 0. Bascially any caching of any type is disabled. (Error still persists)
I don't know what to do in windows or IIS at this time. I've never encountered this issue before so look toward the community for solutions. Thank you.

Moved to the ColdFusion forum.

Similar Messages

MacBooks can't resolve printer name when sending job to windows 2008 R2 print server.

So I am work at company in a windows server 2008 r2 and we have a windows 2008 r2 printer server. Our macbook pros are not on the domain so every time we print to the server we have to type in our credentials.
MacBooks can't resolve printer name when sending job to windows 2008 R2 print server while on wifi but works when hard wired. Any thoughts? The error message I receive is "invalid printer name". I've tried adding the printer through the advanced tab in the print and scan tab of system preferences. I add it buy smb://servername/printername.
When I tried to print on the wifi at my office I get "invalid printer name" in the print job status que.
We can just do direct printing but I would like to know if anyone has had this issue before and if you could point me in the right direction. Thanks!

I assume you aare using exchange when configuring the email notifications? What I would do is just use a normal IMAP & SMTP account such as Outlook.com or if you use a POP connector for exchange, one of those accounts' SMTP settings.
For example, I have a POP connector installed and my emails are hosted at 1and1. What I would do here is put my 1and1 SMTP settings in and use these, instead of using Exchange.
Let me know if this is possible.
Ed

Please help me to get Oracle 10.2.0.5 software for 64 bit Windows 2008 R2

Hi All,
Subject: Please help me to get Oracle 10.2.0.5 software for 64 bit Windows 2008 R2 operating system.
I am looking for Oracle 10.2.0.5 software to install in windows 2008 server (64 bit) R2. I tried with oracle download repository but unfortunately I couldnt find this software. In the below link I can see the product Oracle 10.2.0.5 - 64 bit (Itanium). I have tried to download and install in the server but I received in-compatible error message.
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
From the oracle support certification site I have found that the Oracle 10.2.0.5 is the compatible version to installed in windows 2008 server(64) R2.
I am trying very hard to find Oracle 10.2.0.5 - 64 bit. Can you please suggest me where I can download this software.
Please do the needful.
Regards,
Jame

Hi;
Which means, do i need to install 10.2.0.4 and then to upgrade 10.2.0.5 using patchset?10.2.0.1 is base relase 10.2.0.x is patchest. 10.2.0.5 cover previous patchest errors which mean you do not need install 10.2.0.4 than upgrade it 10.2.0.5
Regard
Helios

CS3 when saving message "an unknown error has occurred"

In illustrator CS3 when trying to saving the message "an unknown error has occurred" pops up. The only way I can get a file to save is saving it as an template. I've tried reinstalling and removing the preferences. Any help would be appreciated.
Thanks

AArrrrrrrggghhh!!!!!!! phew.. sorry.
I have the same problem and I have come to a schtuck. The problem began out of the blue in my illustrator CS2 which was working fine before, so I upgraded to CS3, and the problem is still there, I have tried removing the preferences, I have uninstalled all versions of illustrator including preferences from the PC and reinstalled only CS3 brand new straight out the box. Still won't save.
Any ideas anyone?
I think it's ridiculous that we have paid £2000 for the New CS3 master collection and it doesn't work properly! how can adobe release software with a problem so big as this and charge so much for it? My boss rang adobe yesterday to ask for help and after a long while of not getting anywhere the adobe guy he was speaking to said 'I've had enough of you' and hung up the phone!!! What is that all about? we are legitimate paying customers of adobe for the last 10 years or more! I have now missed a big deadline because of this and am in a mind to asassinate someone at adobe! hahahaha.
Sorry to rant guys but come on adobe! sort it out!
Anyway,
If ANYONE has an aswer or an idea of how I can fix this problem and get back to work I would be very grateful.
some info about my project incase it helps:
I am using CS3 master collection freshly installed on a Dell precision 650 PC with intel xeron processor, XP operating system, 37.6GB free hard disk space, 2 Megs of ram, Nivida Graphics card.
My Illustrator project is a 0.5x2 metre banner made up of a large number of collaged Hi resolution JPEG photographic images. The only composition I have used is Opacity masks with feather effects.
There is no text in the project and no other elements apart from the masked and feathered images.
the original images are stored on an external hard drive with loads of free space on it.
Any ideas I would be very grateful, as I said I have already tried deleting the illustrator settings and preferences files, and re-installed CS3 to no avail.
Thanks! Beth

Powerpoint 2013 throwing 'File in Use' errors when saving to a network drive, file is NOT in use

One of our sites is having a strange issue when saving to a network location in Powerpoint. I'm not sure it's a Powerpoint problem, but it's a place to start...
When saving a ppt to a mapped network drive (the client is running Windows 8 / Office 2013, the network drive is a DFS share, pointed to a Server 2012 machine if that matters), users will almost always get the following error:
"Someone else is working in (filepath\name) right now. Please try again later."
This happens regardless of where the file is being saved on the network drive, in fact it happens even when there is no pre-existing file with that name in the location. So, even if I'm saving a brand new copy of test.pptx to F:\Share\PPT where there
is not currently a test.pptx, I get the error.
Word, Excel, and all other tested apps save properly. Powerpoint can save correctly to the local computer, but not to the network drive or to My Documents (which redirects to the same network drive).
When the error pops up, if I look in Open Files in Computer Management on the Fileserver, I see the file I'm trying to save listed as being open, but it shows 'Disconnected' rather than a username.
Any suggestions would be appreciated - again, not sure that this is a Powerpoint problem - could be Windows 8 or some mysterious DFS thing...
Thanks.

Hello,
Been having a very similar issue in our environment and just came across this thread while Googling and looking for answers.
In our case, we have Windows 7 clients and 3 main files servers - 2 are Server 2008 R2, and one is Server 2012. We use PeerLink File Collaboration to sync the files between
the servers (similar concept to DFS).  For us, it seems to happen specifically with Excel 2013, and only when saving to the Server 2012 file server. I can reproduce the message pretty much every time. After seeing your post,
I tried it in Powerpoint just out of curiosity, but it saved properly - Word saves properly as well.
Been doing a bunch of testing to try and narrow it down, and this is what I've found:
Excel 2013 -> Server 2012 = error message.
Excel 2013 -> Server 2008 R2 = no error message.
Excel 2010 -> Server 2008 AND Server 2012 = no error message.
<o:p>We've been leaning towards the PeerLink replication as the culprit up to this point, but last night I did some testing with the PeerLink Collaboration turned off, and
still received the error message.. so now I'm even more confused!
I see that it's been a few months since your post.. have you made any progress here?</o:p>

HT201413 I cannot get home sharing working, using windows 8 . does anyone have a solution?

i cannot get home sharing on itunes to work using windows 8. I also have Norton 360 and have unstalled and disabled it but still cannot get home sharing to operate so that i can use the remote APP on my ipad to control music through the house. does anyone have a solution or experienced similar issue?

Hi Pat,
Yes I marked the question as Assumed Answered. I needed to move on. I have never taken part in a forum and couldn’t wait any longer for any input so not wanting anyone to waste the time answering me, I marked the question as assumed answered. I guess this was the wrong thing to do and I apologize to the forum.
I did go another route and loaded and enlarged the photo in Photoshop Elements, Then cropped the photo to the area I needed to reprint. I probably should have done this in the first place!
Again, my apology to the forum for my lack of patience in waiting for a reply.
Diane Harris
Sent from Windows Mail

Reader 9.2 crashed when using attach to email command on windows 2008 x64

Hi,
I'm experiencing issues with Adobe Reader 9.2 on a windows 2008 x64 server. This box is running Terminal Services.
When a user open a pdf and wants to attach it to an email, reader simply crash !!
Does someone have ever experienced this kind of issue ?
Thanks.

Does this happen for all the files or only files greater than a certain size?

Error when Installing OBIEE on Windows 2008 r2

Hi all
When Install Oracle BI 10.1.3.4.2 on Windows Server 2008 r2 x64I have several errors in install log:
(Aug 13, 2013 8:52:46 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\server\Bin\installperfsas.bat error=2
STACK_TRACE: 7
com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\server\Bin\installperfsas.bat error=2
at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
at java.lang.Thread.run(Unknown Source)
(Aug 13, 2013 8:52:47 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\web\bin\installperfsaw.bat error=2
STACK_TRACE: 7
com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\web\bin\installperfsaw.bat error=2
at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
at java.lang.Thread.run(Unknown Source)
(Aug 13, 2013 8:52:47 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\oc4j_bi\bin\oc4j.cmd -start error=2
STACK_TRACE: 7
com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\oc4j_bi\bin\oc4j.cmd -start error=2
at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
at java.lang.Thread.run(Unknown Source)
I found several discussions on this, but there was no solution.
JVM - jdk1.6.0_37 and it works fine. Tried to use x86 and x64 jdk. No reason.
I tried to install "as administrator", but it did not worked. Copy the install folder to the C:\, run with comtatibility with Windows7 and got the same error.
I install the same OBIEE on other servers and it was no problem to install.
Please HEEEELP

Hi Agha,
Yes, You can install a Windows 2008 Enterprise R2 machine as additional domain controller along with Windows server 2008 Enterprise SP2 DC's. There will not be any issues.
Before you add a domain controller that is running Windows Server 2008 R2 to an Active Directory forest run Adprep.exe from the Windows Server 2008 R2 media on your existing domain controllers to prepare your domain and forest.
http://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

PS CS5 Write Acess Error saving to a windows 2008 server share

Hi Everyone,
Our macs are running Snow Leopard 10.6.7 and we save/open files on a Windows 2008 Server via SMB,
this particular problem, seems to be happening only with Photoshop:
Sometime, when we try to save an image, photoshop returns a write access error
at that time, if you go to the finder and take a look at the folder, the file had simply vanished.
If you close the image, all lost.
Everything is fine with Indesign and illustrator.
Any help would be much appreciated!!
Thank you all very much in advance.
William

Thanks for the reply Chris,
I am trying to look for a solution on the Mac OS side, this problem happens from time to time.
People keep trying to use Active Directory and log macs on it, it's always a problem.
And to make things worse, apple changes the way Mac OS handles network tasks,
they did it with 10.5 and 10.6. Well, we have to deal with that, right?
Thanks again
All the best
William

Problem with Radio Button using JDeveloper 10.1.2 and Windows 2008

When adding Radio Buttons ("Yes and "No") to a swing application and putting them under a button group. Selecting "Yes" the "No" choice diappears

JDev 10.1.2 is quite old, and was never certified for Windows 2008.
No need to post multiple threads - same question as {thread:id=2271522}

How to get captions to go with pictures when saving to a flash drive?

I JUST SPENT ABOUT 2 WEEKS GETTING NAMES OF PEOPLE AT MY GRANDDAUGHTERS WEDDING AND ADDING TO THE CAPTIONS ALONG WITH PLACE PICTURE WAS TAKEN AND DATE.
i JUST COPIED AND PASTED THEM FROM ADOBE PHOTOSHOP ELEMENTS 10 TO A FLASH DRIVE. HOWEVER, NO CAPTIONS. hOW DO i DO THAT?????

OK, for your family to do that, you don't really want to have the caption written on the picture: for them to "delete it to print just the picture", that caption would have to be saved as a separate layer, and the image saved in a format that supports layers like PSD or TIF. Then, your family members would have to mess around with some kind of image editing software that would allow them to hide that layer with the caption before printing it, and so on....
Here's what to try (and you can test the procedure yourself on your computer):
Right-click on a photo in the Organizer and choose "Add Caption".
Write your caption and click "OK".
Use File...Export As New File(s) to export that image to your flash drive.
Use Windows Explorer to look at the image on your flash drive. At the bottom of the Windows Explorer window, you'll see the various pieces of info about the picture, and your caption will be listed as the "Title".
Although you have to do steps 1 and 2 one-at-a-time for each photo, when you're done with those steps, you can highlight all the images and do step 3 for all of them at once.
Does that accomplish what you're looking for?
Ken

Keep getting "required file in use" error when importing from a disc

Installed 12.0.1 this weekend and now cannot import songs from a disc (have tried on several different discs). I keep getting the error message that "Error occurred while converting the file. The required file is in use). Have rebooted several times with no improvement. There doesn't seem to be any problem playing anything off my existing library, but I also get failure messages when purchasing from Amazon. Anyone have ideas?

Any Suggestions?
Dmitry

In CS3, when saving images, my mac says one size, others say half.

whenever I save images, on my mac it says, for example: 3" x 5" at 300 dpi. I can reopen and it still says that...but sending the image to someone else, it will open at half the size (dimensionally, not just the screen view).
Someone sends me an image, I open it- only resave it with a diff name and send it out....they receive it at half the size.....
can't find a bad pref and tried reinstall....still same issue....
HELP!!!

You can reset the prefs by holding down option, command and shift while launching Photoshop. If you don't get a warning box asking if you want to reset them, they haven't been reset.
I would try posting a screen shot of the image size dialogue box here using the little camera icon in the forum message editor. To capture a screen shot, press command-shift-4 and use the cross hairs to "select" (click and drag) the capture.

Different crash in Illustrator CS3 when saving

Howdy all,
I looked over all the threads about Illustrator crashing upon Save, Save As, Save a Copy, etc., but have not seen this particular problem addressed.
The area that crashes Illustrator EVERY TIME is if I click on the pull-down bar where you can see/change where it's going to be saved, in between the navigation arrows/buttons and the search window.
Anyone else have this problem?
(Illustrator 13.0.2, Mac OS 10.4.11)
Thanks!

This may be a specific bug in the context of OSX 10.4 and/or a resource problem. Since you used label colors everywhere and there seems a very long list of folders, i could imagine that the dialog can't generate the tree in time. also, if you are saving to a network or have many volumes, something similar may happen. Can you open the folders in other apps? what happens, if you e.g. unplug the network connection (should you use it)? As a minor, I'd try to trash the prefs (Users:Frost:Preferences) to clean out the MRU lists. This should open up any open/save dialogs with the default location (your Documents folder in the Library) and circumvent the issue. On doing so, I'd definitely also reset the layout of the file dialog to not generate previews and hierarchical lists, just the simple path selector...
Mylenium

How do I get the transparency option to open when saving a project?

I am working with a .tif and I remembered that I have to flatten the photo, so I went to Image menu and selected flatten. Then I went to File menu and selected save as. It seems though that I have missed a step in the process. I don't know if there was something I was supposed to do prior to the File menu. When in the Save as menu, I save the image as a TIFF and not a psd. Another dialogue pops up and this is where the transparency option is but it is greyed out so that I can't select it. What am I missing?

Thanks for your help! I just figured it out. Your reponses led me to what I was missing...which was the removing of layers after I was finished editing the image...once I did that, when I went to save the image as a .tif, the save transparency option opened...Thanks again!

Getting a Sharing Violation using CS3 when saving/refreshing our Windows 2008 box

Similar Messages

Maybe you are looking for