Getting AC3 or AIFF files directly from the DVD studio Timeline.

I'm trying to give my website manager parts of one of my previous demos. Instead of completely rendering the whole thing over I imported the original Mpeg, AC3 and AIFF files to my DVD studio timeline. There I was able to cut out the middle of my demo by cutting the end of one Sequence and the beginning of the other. With this said I want to give my website manager Mpeg and AIFF or AC3 files for him to use. I was able to export the Mpeg file easily but am not able to export either of the audio files, does anyone have an idea?

Hmm, you really should completely render the whole thing over again.
MPEG-2 videos are very highly compressed. If you take that and compress it again for the web, there is going to be a guaranteed loss in quality. Think of photocopying. If you make a photocopy of a picture, it comes out pretty good. But if you make a photocopy of that photocopy, it comes out very bad. You want to avoid double compressing.
Go back to your original videos in FCP, edit the clips you want. Then export out QuickTime mov files using the same codec you edited in. Give those to your website manager for compression for the web.

Similar Messages

  • How do I move a file directly from the desktop to a folder in OX 10?

    I am new to Mac and the Mountain Lion software.  Having worked exclusively with PC operating systems, I am familiar with how to work with files in Windows, but am having trouble doing similar actions in OX 10.  How do I move a file directly from the desktop to a folder in OX?  Although this answer is likely in a video tutorioal (somewhere), I do not have the time to sit an arbitrarily watch generic OS videos that give a broad brush overview, without answering specific queries.  Any help out there?

    You might fun http://www.apple.com/support/macbasics/ to be of help to get used to doing things the Mac way.
    Allan

  • Good afternoon ladies and gentlemen!   My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

    Good afternoon ladies and gentlemen!
    My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
    Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
    The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

    <moved from Adobe Creative Cloud to Bridge General Discussion>

  • Can I Transfer Videofilme Files directly from the Camcorder (Sony NEX 20) into the iPad?

    Can I Transfer Videofilme Files directly from the Camcorder (Sony NEX 20) into the iPad?

    Can I Transfer Videofilme Files directly from the Camcorder (Sony NEX 20) into the iPad?

  • Get a font's file name from the font's postscript name (on Windows)

    I am trying to obtain the the font file name when the only information I have is the font's 'postscript' name. (Emphasis: the font's name is postscript and not the font).
    For example I have the following postscript name: TimesNewRomanPSMT.
    The real name that is saved in the registry is: Times New Roman (TrueType).
    Is there any way of obtaining that name from the given postscript name?
    Currently I am coding this for Windows, but it should be compatible, or at least have alternative code for MacOS

    Funny. I'm having the same problem and was about to post the exact same question
    In Photoshop, there is "app.fonts", which lets you get a font's postscript name from the font's name. This doesn't exist in After Effects.
    My only hope is that there's a way to get a font's postscript name in Visual Basic. I'll let you know if I find anything useful.

  • Getting 404 while view in browser from the site studio desinger..10gr4

    Hi ,
    Thanks for the help guys.
    I have a question here...I have created a website using site studio designer and a home page ..when i right click on the home page i have created...to view in the browser..its giving me 404 error...i am not sure whats the problem is...
    the url looks like this
    http://myucmIpAddress/sitestudiosamplewebsite/index.htm

    Hi
    Reason is you have missed out to make the config changes in Apache webserver's httpd.conf file . It should be like this :
    <Location "/">
    IdcSecurity idc
    </Location>
    Restart apache after this and then test .
    Thanks
    Srinath

  • Recover iPad 2 data directly from the device

    I just upgraded my iPad software to iOS 6. Something happened during the upgrade and iTunes restored the files using an old backup which resulted in loosing a lot of pictures, apps, etc. Is there a tool available that would help restore those files directly from the device? Thank you.

    As a follow up to the above question... Even if there is no tool available, is there a way to get back the information that was on the iPad before the upgrade to iOS 6? I've not connected to iTunes for a few months and when I did, as I mentioned before, I've updated to the latest version of iTunes and iOS. There was a glitch with the upgrade, it got interrupted, and when it restarted it restored and old back up. The result was that everything I added since the last backup doesn't show up on my iPad anymore.
    I would really appreciate an answer to my questions even if it is: It can't be done. Period.
    Thank you.

  • Can't open files directly from file server (MAVERICKS)

    since updating to Mavericks earlier today i have had the below problem
    I use a file server at work to access all my work files. i have no problem accessing the servers but when i try and when I double click to open a file (excel, word, pdf, etc) it says "the application cant be found"
    when Ihave the application open and i open the same file from within the application (file > open) it works fine. I just cannot open files directly from the file server by double clicking.
    in previous versions there have been no problems with this,
    any help would be great,

    Same issue here; I hadn't related it to upgrading to the latest OS 10.9.2. I've shutdown and restared multiple times. I've also rebuilt permissions on my hard drive as I thought it was the Finder but files on my local HD open file. Off the server, I cannot double-click or even drag to the dock. Files open fine if I open the app first then browse to find the file.

  • How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them

    How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them. They have a ton of books but I can only listen to them from my windows media player and I wouldlove to download to my I pod but I have tried everything I can think of it they won't go over.  Someone said all I had to do was copy them over and they would convert but I can't even get them to copy.  Thanks.

    Well it started happening AGAIN with my 2nd IPod. No matter what I did, it Itunes would NOT restore it!
    I finally installed Itunes on my hubby's PC at work and managed to get it restored there.
    Apparently, there must be some sort of compatibility issue with the windows version of Itunes and some other piece of software on my pc.
    And one more important thing! I had to follow the instructions in the other thread that talks about how to correctly uninstall itunes and quicktime, in order to completely eliminate ALL traces of my "first" ipod's existence so it wouldn't demand that I restore it.
    I think the software got "confused" and thought when I connected my 2nd ipod, that it was the 1st and that it still needed to be restored.
    Basically, this is just POORLY written and POORLY tested software!

  • I have lots of .MOV files on my iPhone5 that I need to transfer to my PC.  Using QuickTime Player 7.7.4 I am unable to view them once they have been copied to a hard drive or directly from the iPhone via USB. 1% of the time a vid is viewable

    I can tranfer them to a hard drive on my PC, but am unable to view most of them using QuickTime Player 7.7.4. Doesn't matter if I'm viewing them via a USB connection to my iPhone5 or from a hard drive after the file has been copied via USB.  1% of the vids are viewable, 20% open with a black screen and audio only. The rest open with a blue, purple and green stryrated mess and no audio.  Yes its a Quick Time problem I know but where do I post this question in the community?  Also searching my drives for other .MOV files downloaded from the net I find the same problem with them.

    Heres what I don't like about VLC, but at least the files are viewable...somewhat.
    1. You can't flip the image 90degrees, needs to have a rotate feature for sure.  This needs to have keyboard shortcut so vids can be rotated easily as one may have shot video horizontally and vertically in the same take.
    2. Opens file to a very large window, most of it off the screen, it should REMEMBER what you resized it to, so the next time a video is played you don't have  to drag the window back on the screen so you can get to the resizing handle in the lower corner.
    3.  Doesn't buffer while playing, so the movies are extremely erractic, starting and stopping every 3 seconds, highly annoying. 
    OK so maybe my PC is too slow, its a dual processor 486 Hyperrthread 2.8G but I only have 2Gigs of memory, however, bettery than 50% of the memory is still available while playing a vid (memory is checked every 4 seconds with a program), but I have 90-100% CPU useage going on while playing.
    Maybe I should think about a new computer.

  • I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

    I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

    Unfortunately, that drive is long gone, probably back to the mfr. Drives are not returned when they are exchanged. You can go by and ask them, but the chances are slim to none.

  • Why do I get a "can't import spreadsheet because it was created with an unsupported application version" alert when the updated version was purchased direct from the Mac App Store? The spreadsheet is now lost somewhere!

    Why do I get a "can't import spreadsheet because it was created with an unsupported application version" alert when the updated version was purchased direct from the Mac App Store? The spreadsheet is now lost somewhere!

    Pages 4.3 should still be in an iWorks folder within your Applications folder. 
    http://www.apple.com/feedback/pages.html

  • HT5103 I downloaded a trial version of Final Cut Pro X directly from the Apple website but when i try to open the file, a message is displayed saying 'legacy file should be converted' what can I do to fix it?

    I downloaded a trial version of Final Cut Pro X directly from the Apple website but when i try to open the file, a message is displayed saying 'legacy file should be converted' what can I do to fix it?

    Where did you download it from exactly? URL.
    Exactly what computer is this.

  • Is there a way to upload files directly to the cloud from bridge cc?

    Is there a way to upload files directly to the cloud from bridge cc? I use bridge to organize my files. It would be a lot easier if I didn't have to drag and drop files into the cc folder, I was hoping that there might be an easier way.
    thanks,

    When you save them just make sure you save them to your Mac and not iCloud. For those that already exist, you can move them from iCloud by dragging and dropping them to somewhere else on your Mac. To see all the files in iCloud choose file > open in either pages or numbers.

  • I had CS6 and now I have installed CC. I cannot open files, place files, etc directly from the File Open... or File Place...   Is there something I'm missing in CC that I don't know about?

    I can open files directly from my Finder window (Mac OS, running latest installment). And I can copy/paste or drag/drop graphics into an open AI file for editing. But I can't use the AI>File>Open... or AI>File>Place... (or any shortcuts). Absolutely nothing happens. It's like I never clicked anything.
    Am I missing something???  I've never had this problem in CS6. Is there something different in CC that I need to add or erase?
    HELP!

    Deornorth wrote:
    I didn't realise that the Camera Raw won't work in 64bit mode. Converting to 32bit enabled the files to be opened.
    Actually, that's wrong. Camera Raw 6.3 WILL run as a 64-bit plug-in when hosted by Photoshop CS5 if CS5 is running as a 64-bit app. It'll run as a 32-bit plug-in when hosted by Bridge or Photoshop CS5 set to run as 32-bit.
    So, there's something else going on here....
    How are you trying to open the raw files? From within Bridge or the Finder? How did you update Camera Raw to version 6.3? From the updater? Is ACR 6.3 in the correct install location? main Library (not the User but root), Application Support/Adobe/Plug-ins/CS5/File Formats/Camera Raw.plugin
    Can you open raw images from within Bridge? Have you tried to view raw files with Bridge before you updated Camera Raw? Have you trashed the cache foe the folder? In Bridge under Tools/Cache/Purge Cache

Maybe you are looking for