Getting an error message when I convert to .WMV
So I have my project all done, I got to convert to a WMV file, and then it pops up the error message of "Insonsistent Audio Sample Rate" "The media you are exporting contains audio with multiple sample rates."
Now when I check the sample rates on everything they are all at 48. So I'm not sure what the problem is.
Even weirder is, that I am able to convert to a WMV on another project using the same footage, just a different section of it. But it was all shot at the same time.
Any ideas?
Hi(Bonjour)!
I just found this info on Flip4mac web site:
"Article 0070
Category: WMV Components
Subject: Inconsistent Audio Sample Rate
Date: 7/17/07
We have confirmed that when encoding WMV files with uncompressed audio sources after installing QT 7.2, you will receive "Inconsistent Audio Sample Rate" error and the encode will fail. This affects Flip4Mac WMV Studio, Studio Pro, Studio Pro HD versions. We are working to resolve the issue as quickly as possible.
You might want to try the following steps as a temporary workaround:
1. Open up the clip in QT Pro, iMovie or Final Cut Pro
2. Export to Mpeg-4
3. Click Options
4. On the file format pull down select MP4
5. On the video format pull down select Pass through if possible. Otherwise, select H264.
6. Then go to the audio tab, and change the output sample to 44.100
7. Then save the file
This will make an MP4 file which will not recompress the video format more than once with the audio sample rate changed to 44.100 which will allow the file to be exported to WMV.
Michel Boissonneault
Similar Messages
-
I get an error message when trying to convert to a word document
i get an error message when trying to convert to a word document
Its with the ExportPDF online service.
This is a snip of what it looks like: -
I get an error message when I try to convert a PowerPoint program from PDF to Word.
I get an error message when I try to convert a PDF Power Point Program to word. I need to convert the PPP since I must edit the slides.
You may want to look at our CreatePDF service or Adobe Acrobat Professional. Both of these options have a PDF -> PPTX conversion option.
You can learn more about CreatePDF here: http://createpdf.acrobat.com
You can learn more about Acrobat Professional here: http://www.adobe.com/products/acrobatpro.html We do offer a trial of Adobe Acrobat Professional here: http://www.adobe.com/go/tryacrobatpro/ -
Getting an error message when converting smartform to pdf form
Hi,
I'm getting an error message, when trying to convert smartform to pdf.
[H:\Argentina\Error]
<<No Question asked. Thread locked>>
kindly help
Thanks
Devinder
Edited by: kishan P on Jan 19, 2012 3:01 PMHi,
Your smartform getting the correct output. If the output is fine i will some process follow it to convert it into PDF.
<<Do you even know what is the issue. Dont guess>>
Edited by: kishan P on Jan 19, 2012 2:58 PM -
previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert
previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert
-
Why do I get an error message when attempting to download music into a project in Ellements 13?
cornman30
What computer operating system?
And, where is the music coming from, iTunes? If so, that is a known problem with Premiere Elements (just about any version).
The answer has been to convert the iTunes music to the wav version in iTunes.
The following is the iTunes' document how to.
iTunes: How to convert a song to a different file format - Apple Support
Any questions, please do not hesitate to ask.
If other than above, please supply more details to help us help you.
Thank you.
ATR -
I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
I get an error message when I try to save my images in Photoshop CS6
I get an error message when I'm trying to save my images. It reads as follows:
"Could not save because file is locked, you do not have necessary access permissions or another file is using it"
The file is not locked (I unlocked the image as a layer), I am the administrator, and it wasn't being used elsewhere.
This has happened with all the images I've worked on in the past 90 minutes. Has anyone got a solution? I've never gotten this message beforeCheck that you actually have write permissions on the drive you are trying to save to. They can an do get changed.
-
I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync: "you do not have enough access privileges for this operation." It never did this before, whether it's the upgrade in software or something in iTunes, but it's very frustrating, since I'd like to add more things to my iPod.
See:
iPhone - not enough access privileges: Apple Support Communities -
I get an error message when I sync my iPhone 5 with iTunes on my Windows 7 Samsung laptop. I recently backed up all of my data using Samsung Recovery Solution 5 to an external hard drive so that I could restore my laptop. I put all of my data back on the restored laptop and reinstalled iTunes. After the error message that says that certain items could not be found and the "sync" is finished I go back to my music in iTunes and there are exclamation marks next to many songs. I follow some instructions regarding the Edit - Preferences - Advanced settings and the exclamation marks go away until I try to sync my phone again. Then I get the same error message and the exclamation marks return. I have uninstalled and reinstalled iTunes and the same thing happens again. I am about to schedule an appointment with the Genius Bar but would like to avoid that if possible. Thank you in advance for any help.
Hello Courtney,
Thank you for the details of the issue you are experiencing when syncing your music to your iPhone. It sounds like iTunes is not able to locate the original file for the song to transfer it to your device. I recommend reviewing the following articles to locate you music files on your computer:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/ts1408
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I had to reinstall itunes and now I get an error message when i try to open it please help
i had to reinstall itunes and now I get an error message when i try to open it please help
Please make sure to post the error message here, then we can help you decypher it.
You may want to make sure you're installing the right version of itunes. If you have a 64bit system, you will need to make sure to download and install the 64bit version of iTunes.
http://support.apple.com/kb/DL1427 -
I keep getting this error message when updating imovie "There was an error in the App Store. Please try again later. (20). Does anyone know how to fix?
If you're having problems with the App Store you might try this:
1 - enable the Debug menu in App Store:
open the Terminal application.
copy the command below and paste into the Terminal window:
defaults write com.apple.appstore ShowDebugMenu -bool true
followed by Enter.
launch App Store, login.
2 - select the Debug ➙ Reset Application option:
3 - try again.
OT -
I get an error message when trying to sign into the support community with another Apple id. On the <pick a username> screen I get "an account utilizing this address already exists.Only one account per email address is allowed on the Apple Support Communities" despite trying a few usernames. Anyone know how I can resolve this?
This problem has been driving me demented. The instructions that Ivan gives have partially worked for me. By following his link
"How to find out if you have multiple Apple IDs" I was able to identify that yes I did have two apple accounts using the same e mail address. One was very old that I used to use for the forum boards and one is my much more recent ID that I use for everything these days. So I changed the e mail address for the old account which is associated with these discussion boards and that's the account that I am now posting this from. However even though the two accounts now have different e mail addresses when I try to log onto the boards with my more recent main apple ID I still get all the same errors as described at the start of this thread by rodgers_j. And of course that's the one I want to use so that I only have one itunes account for everything.
So if anyone has any more hints I'd be very grateful. -
I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?
Where are you hosting the site a what are you using to upload the site files to the server?
OT -
I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison" What do I do?
Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd
Maybe you are looking for
-
Hello people, i'm creating a program that needs to generate private keys, i've found out that java has built in libraries that support this so i've tried: KeyPairGenerator keyGen = KeyPairGenerator.getInstance("RSA");
-
How to use java script in jsf?
my requirement is i have to pass the id of the component to the java script function .that component is inside data table. how to solve this problem?
-
Best Video Conversion Settings
I'm trying to convert all my AVI files to mp4 format so I can watch them from my iPod on my TV. What's the best program to do this with? And also, what are the best settings for the conversion? I'm looking for the best video and audio quality possibl
-
Is there a limit to how many concurrent URLRequest's I can initiate?
I have an app that when it starts loads up about 200 small gif images from the web server. Code looks something like this: for each (myValueObject in myarray) { var req:URLRequest = new URLRequest(myValueObject.getImageURL()); var imageLoa
-
Hi, Can Anyoone tell me BAPI for RFQ Release?