Getting an error messages in XI 3.0 please help

Hi, Dear
In XI 3.0 we are tyring to setup SAPconnect;
1 Step;  Create RFC connection for Mlunxsnd file, anyway!!! we download thease file and create RFC connection; fine working no error
2 Step: Create Nodes T-code SCOT => connection INT => and support address type like Internet its just show only "PDF, HTM, TXT" thats it its not show some others format
3. Step; When check email T-code SOST Getting an error messages:  "Connot process message in node, parameters cannot be converted"
4. In R3 RPD and Others system when I check format its ok its show some others format which is support to be such as "ALI, OBJ, OTF, SCR, URL" ...
How may install these format in XI 3.0
Please Advice I will be really appriciated
Thanks a lot
Travis

Hi,
Please check out the following link for SAP XI3.0 installation:
http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
Regards,
Sushama

Similar Messages

  • While updating my iphone 4 to 5 I'm getting an error message 'connection is timed out. please check your internet settings' whereas my connection is very much active. Any suggestions!

    While updating my iphone 4 to 5 I'm getting an error message 'connection is timed out. please check your internet settings' whereas my connection is very much active. Any suggestions!

    Check to see if you anti-virus software running, that will at times interfere with the connection with the Apple server.

  • I have purchased a new Mac power book 10.9.2.  I cannot open illustrator CS4 and get the error message 150:30.  Can you help?

    I have purchased a new Mac power book 10.9.2.  I cannot open adobe illustrator CS4 and get the error message 150:30.  Can you help?

    You are welcome, Sharon.
    You should be aware that the newest version, CC, is only available as a subscription.
    CS6 can be purchased at Adobe, or second hand, see below.
    Older versions such as CS5 can only be bought second hand, with a licence transfer through Adobe, requiring that the licence has not been used as a basis for an upgrade.

  • I'm getting  an error message after completing an update.  Help?

    I'm getting  an error message that says "This version of iTunes has not been correctly localized for this language.  Please try running the English version." after completing an update.  Help?

    Thanks for your help! I imported the table into Muse, then exported the site as html and opened it in Dreamweaver. I should've tried that in the first place but gave up when I couldn't edit it in Muse. I didn't know you could edit the html right in Muse. Also, my styling and the images I was using weren't showing up in Muse but once I opened it in Dreamweaver, everything fell into place. AND I could edit it! My client needs to edit this page every week, so I needed to be sure she could do that. She doesn't use Muse but does use Dreamweaver. At this point, I think I'll leave it alone and not try to style it with inline css. Maybe when I get a little more time, I'll try it. I just don't want to mess things up now that the're working.

  • HT3728 My AirPort Base station connects me to the Internet but I get an error message saying "Double NAT"  can u help me?

    My Internet connection is fine but everytime I turn on the computer I get an error message about my AirPort Extreme that says. "Double NAT"  can I fix this or should I not even worry. 
    Thanks

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme
    Click the amber dot next to Status
    Click the option to ignore Double NAT
    Allow the settings to update and the AirPort Extreme will restart with a green light in 25-30 seconds.

  • I cannot start my cs4 program I get error message 148:3  can someone please help

    I cannot start my cs4 program I get error message 148:3  can someone please help

    Which operating system are you using?
    If it's windows:
    Error "Licensing has stopped working" | Windows

  • Apple TV won't load up. the light flashes and the logo appears on the TV then it just goes off and starts again. I've tried restoring via USB on 5 different computers and I keep getting error message 9? Can anyone please help?

    I have a black Apple TV that has recently stopped working. It loads the Apple Logo on screen then goes off and starts again. It's as if it is stuck in a loop. I've tried a re-boot and this has failed. I have tried a restore using a USB cable on 5 different computers, including a Mac Book Pro and it downloads the update file but when it tries to restore I get the error code 9 showing on screen. I just can't get it to do anything.
    Can anyone please help?

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • HT4972 Hello, I just updated the iphone with 5.1 ios...but now i'm getting "No Service" message for AirTel...Please help

    Hello, I just updated the iphone with 5.1 ios...but now i'm getting "No Service" message for AirTel...Please help

    Hi, Yes, I bought new sim (64k) from Airtel gallery...and now i'm on version 5.1.1...Sometimes it works but if i turn on the 3g then the network went down and showing me a "NO SERVICE" error...i have to wait till the network come...it's a headche..I think i have to go again in gallery and want to ask for new sim with 128k...Any suggestions on this plz?

  • Error message when exporting to qt, Please Help!!

    I am getting file I/O error message when trying to export a 52 minute wedding project to quicktime. I tried different quictime settings, but nothing helps. Please hep me out with this issue it is driving me crazy.
    Thanks

    Ok, I have trashed my final cut preferences, I checked and my external hard drive is set to mac osx extended. I ran disk utility, I exported to quicktime movie using current settings with movie self contained checked and I get the error message right away. Then I did it without self contained checked and it goes to 21% and I get the error message. Everytime it says this: File I/O error, that is all it says. What does this mean? What can I do next? I have a deadline for this project. I have alot of memory left on my external hard drive. This has never happened before. Thanks for all your help guys.
    D.T.

  • Palm TX error message (sys 0505) (0,841) PLEASE HELP!

     I  made a recent post about loosing all the data I had in my calendar for the year.  When doing Hot Sync to my PC I get an error message as indicated in my subject line.  Does anyone know what this means or how to obtain this knowledge.  Could it be related?  Does anyone know how to correct this problem?
    Post relates to: Palm TX
    This question was solved.
    View Solution.

    kabosse1 wrote:
    I did download the My Palm software and also lost all my applicatioins menu options, I do not know how to delete it.
    kb
    Post relates to: Palm TX
    Sounds like your best bet is to start all over with a Hard Reset, then sync back up with your original Hotsync user name.
    To perform a Hard Reset:
    While pressing and holding the Power button down, tap and release the Reset button in back and continue to hold the Power button down. When the grey Palm logo appears, you can release the Power button.
    You should now see the warning page in about 5 languages. Press the UP direction on the 5-way pad to complete the task. Your Palm will reset itself several times as it re-installs the original programs and erases all your previous data.
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Hello, I just updated the iphone with 5.1 ios...but now i'm getting "No Service" message for AirTel...Please help

    Hello, I just updated the iphone with 5.1 ios...but now i'm getting "No Service" message for AirTel...Please help

    Where did you originally purchase your iPhone? How was your
    iPhone unlocked to work with AirTel? What does it say  when
    you look at Settings=>General=>Carrier?

  • How can I fix firefox, my problem does not match those in descriptions because I get no error messages and re-installing does not help!

    Firefox will not start, no error messages at all unless I go to uninstall it and it says that it is already running. After rebooting my computer, and re-installing several times I still get nothing! Been going on for a month or so now. I am running XP pro. PLEASE HELP! I love firefox! The thought of using chrome, safari, IE, or opera is depressing! Please help! Thank you, I have used Firefox since late 2004, it is by far my favorite for many reasons. Any help would be greatly appreciated!
    Sincerely eli anderson.

    Contact iTunes customer support.

  • Everytime I want to update the latest iTunes or iPhone software I get the following error message "Cannot open the URL" please help?

    I need to update my iTunes and my iPhone 3GS to the latest version and evertimes I click on "update" I get the following error message displayed - "cannot open URL".  I have checked the permissions on my windows firewall and iTunes is not blocked.  PLease can anyone give me some other suggestions as its really frustrating and I want to download ringtones etc but can't do so without the latest software versions of iOS etc.  Please help?  Thank you

    Try temporarily disabling your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

  • I am having trouble installing Itunes 11.1.1.  I get an error message 2502 and 2503.  Any help in this regard would be appreciated.

    I am having troble installing Itunes 11.1.1.  I get erro message 2502 and 2503.  Any help?

    Windows 7 32 bits
    I had the same issue which is now solved. For your information, the following procedure was successful:
    Check permissions within the Installer folder. To do this, follow these steps.
    1. Click on Start and in the Start Search bar > type in > c: /windows/installer.
    2. Right click on c: /windows/installer at the top under programs and click properties.
    3. Click on the security tab > Verify if System and Administrator account has Full access permissions.
    Note : I ran into problem with locating the C:\windows\installer directory. For some reason Windows Explorer wouldn't show it even though I don't have it hidden. I ended up using the ExplorerXP application to locate the directory. ExplorerXP is available at http://www.explorerxp.com/

  • I get download error message, could not be opened bec helper app does not exist, chg the association in preferances--What to do?

    I get - Download Error - /Users/ffrasher//Desktop/Firefps
    3.6.13.dmg could not be opened, because the associated helper app. does not Exist. Change the association in your Preferences. I run MOSX 1.3.9, Firefox 2.0.0.20. What can I do to upgrade.
    Frank

    See:
    *http://kb.mozillazine.org/The_associated_helper_application_does_not_exist

Maybe you are looking for

  • Can I have more than one primary key ???????

    Hi Assuming an application has designed as CMP with findByPrimaryKey( ) method having more than one parameter. Example :- findByPrimarykey(String val1, String val2) Is it possible to have two parameters fot the finder methods instead using PrimaryKey

  • Can disc utility copy an R+ dvd disc for playback on a dvd player on TV

    I have a dvd (R+) that plays on my TV okay via a Sony DVD Player. When I try to copy it with the Finder to another R+ DVD the copy plays back okay on my iMac but not on the TV (using File Info on the copy the format is Mac OSX Extended). Can Disc Uti

  • Adobe Reader PDF Batch Print

    Question: Is it possible to build a batch printer using the SDK and libraries available with Adobe Reader? Environment: Win XP and Win 7 Client machine install Adobe Reader - required version can be installed VB6 or C# .NET Experience To Date: The Ac

  • SQL Table Link between invoice and profit centre

    Hi, We are about to bulk import reserve invoices but I just need to allocate an invoice against the correct profit centre. Where is the link between sql tables? Edited by: Ricky Thomas on Mar 17, 2011 5:15 PM

  • Option (Alt) key not creating symbols and characters

    I have a new MacBook Pro, UK British Keyboard setup and im not sure if the issue came from updating to Lion, or if it was already a problem on Snow Leopard. The problem i have is that with the Option (Alt) key pressed im not getting most of the symbo