Getting an error when booting SATA on K7N2 Delta2

I just finished the Windows XP installation and everything is running great. I have 2 issues:
1. The processor is an Athlon XP 1700+ (1.4 Ghz), but the BIOS & Windows are seeing it as a 1.1 Ghz.
2. I have to leave the CD-ROM as my first boot device with the Windows XP Pro CD in the drive and allow the message "Boot From CD" to run its course before it will boot from the SATA drive. I have no idea why this is. If I change the boot order or remove the Windows XP Pro CD from the CD-ROM, I get the message "NTLDR not found".
Any idea????

Quote
Originally posted by labtech1
There is no separate SATA controller on the Delta2 as support is integrated into the new south bridge. IDE channels 1 & 2 are PATA, master and slave the same as on a conventional board. IDE channels 3 & 4 are SATA master only. The default boot priority is PATA first followed by SATA and when you install Win2K or XP it will use this order too. To avoid this happening disconnect the PATA drive during the installation as indicated by Wonka above to ensure that Windows sees the SATA drive only and set the bios to boot from the SATA drive first after setup . Assuming the first HDD is 0 (PATA IDE1) the SATA drive on IDE3 should be HDD-2. I have not seen the Delta2 as yet so don't know what the exact bios options are but provided you ensure that the SATA drive is the only active disk present on your system Windows should boot from it. To load the drivers for the SATA controller in Windows you need to install the Nvidia SW IDE driver included in the current unified driver package version 5.03 (MSI) or 4.27 (Nvidia).
Edit:- On the Abit NF7-S2G, which has the new south bridge hard disk, boot priority is set in Advanced BIOS Features. There is a setting for Hard Disk Boot Priority and you press enter to reach the sub screen. You can then change the boot order of the hard disks by paging up or down as appropriate. As soon as you get the order you require save and exit. Nforce2 boards tend to use reference bioses provided by Nvidia so the Delta2 may well be similar.
I have the same option to select Hard Disk Priority and have selected the SATA drive, but am still having the same problem. I did install the drivers that came with the board. Shouldn't that take care of the SATA controller driver? I really don't want to reinstall the OS so I am hoping that someone knows a way to get around this.

Similar Messages

Can't boot SATA on K7N2 Delta2 Platinum

Description: Boot from a Linux installation CD rom, it recognizes and formats the SATA drives. On reboot, it doesn't try to boot from the SATA drive, it tries the CDRom and DHCP boot (and fails).
I installed a 20GByte IDE drive, installed, and booted, and added an option to Linux's GRUB loader to try to boot from the SATA drive. it boots from the IDE drive, brings up the GRUB menu, and I choose the SATA menu item, and it fails with a "drive not found" error. (This is before the OS is installed, so it's not an OS driver problem).
The BIOS is 26570NMS v11.4 081604 13:38:12.
I have Serial ATA enabled, and SATA Spread Spectrum enabled in the BIOS.
If I choose "Hard Disk Boot Priority" in the BIOS, it gives the single option "Bootable add-in cards". If I do this with the IDE drive installed and enabled, then I also get a "C1.0 M. WDC WD200..." option. But I don't see any options for the SATA drives (there are two).
Any ideas? If you need more info, let me know. There's also an Intel Etherpro 100 network card installed.
Thanks very much...

Thanks. I tried the discWizard, it couldn't find the SATA drives! (yes, they are seagate )
I'm pretty sure this is a BIOS issue and not a linux issue, since:
1) The DiscWizard couldn't see the drives.
2) The BIOS reports the IDE hard drive is there when it finds it, but never says anything about the SATA drives.
3) Once linux is booted (off the IDE drive) it can see the SATA drives fine.
4) (forgot this one). The BIOS hard disk boot menu mentions the IDE drive by name, but not the SATA drives.
Thanks again,
j

Ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error

ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error

Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive?

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have to clear this everytime I boot up?

With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

Adobe error when booting

Hi
My MacBook Pro running Mountain Lion is logging the following Adobe error when booting. I don't know which program from Adobe it comes from. I have Flash and Photoshop installed.
It takes my Mac 11 seconds of boot time to generate this error every time I boot. I would like to get rid of the program causing it.
Frank
My log:
26/09/12 07.27.16,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=264[ksadmin] clearing CS_VALID
26/09/12 07.27.27,665 osascript[276]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
26/09/12 07.27.44,484 osascript[280]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
26/09/12 07.27.46,308 osascript[281]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
26/09/12 07.27.46,401 osascript[282]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
26/09/12 07.27.46,753 osascript[283]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
26/09/12 07.27.46,890 genatsdb[251]: *GENATSDB* FontObjects generated = 737
26/09/12 07.27.46,927 osascript[284]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
26/09/12 07.27.46,983 osascript[285]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

First, in System Preferences -> Users & Groups -> Login items, look for anything Adobe in the list of items and remove it. Then your Mac will not attempt to load anything Adobe during boot-up or log-in anymore, but boot much faster again.
Then see if problems persist when starting your Adobe apps. If so, uninstall them completely (!!! - usually, there are files left over under Applications and in Application Support in the Libraries - remove those manually), then re-install these apps fresh.

I continue to have an Adobe error when booting up my computer. It reads: this specific module could not be found. \AppData\local\diagnostics\tlfpizv.dll

I continue to have an Adobe error when booting up my computer. It reads: this specific module could not be found. \AppData\local\diagnostics\tlfpizv.dll
Please tell me there is a fix that does not involve buying a computer clean sweep program.

Hi brigitta2,
You might be getting the error message because of any of the following reasons:
.dll files are corrupt or missing
Attack of malware or other spyware
Incorrect installation of applications
Damaged Windows registry
Old Windows device drivers that need to be updated
The problem can be sorted if you know the exact reason behind the same. Please let me know the exact error message that appears on your screen.
If the issue is with damaged files then you might need to replace them or if it is a system issue, then please take your laptop to an expert who can deal with system issues.
Regards,
Anubha

HT1338 i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

I dunno, that doesn't make any sense to me.
I just shut down and rebooted into the SnowLeopard partition and took a peek at the preference panes. There are only 3 that run in 32 bit only. They are all 3rd party, and none of the prefpanes are non Intel. Like I said, I have never owned a PPC machine. Anyhow, SnowLeopard doesn't even have an iCloud prefpane, or a combined mail, contacts, and calenders prefpane, and the ML security and privacy prefpane is all new as well. The software update prefpane is Intel and 64 bit in both SnowLeopard and Lion.
As to the triple boot, unless I'm totally mistaken, what I have here is, in essence, 3 seperate descrete computers in one box. All using the same hardware. but one at a time. I wouldn't know how to get more than one running at the same time, without using a virtual machine, even if I wanted to. (Which I don't) I do sometimes transfer files from one to another using the shared folder, but other than that, they do not interact. How could ML system preferences be trying to launch prefpanes from a totally different machine?

Any one know what error -5000 is? I get this error when I try to update to IOS 5 on my 3gs phone.

Any one know what error -5000 is? I get this error when I try to update to IOS 5 on my 3gs phone.

I am also facing the same issue.
four days back, my power buttton stopped working.
Then my sim card slot stopped reading like it was stuck at gsm/cdma band.
Even without simcard it said searching..
then I changed the power button and antenna strip myself as my iphone5 is uk ee and i live in india.
Everything was fine and I booted the phone.
The power button worked like a new device... but the searching problem still remained.
I hard resetted my phone but to no vail. even Find My phone was not turning off.
then I forced my phone to recovery mode and downloaded iphone5,2 7.0.2,11A501_restore.ipsw from web and flashed it.
At the start it recognised and everything was good until the "restoring iphone firmware" was stuck at the end point.
I tried every trick on net. Even tried to downgrade.. but it was blocked.
at the last it is either stuck at firmware or itunes unknown error (3)
Please somebody help me to recover this PAPERWEIGHT to a phone again...

Keep getting 5002 Error when trying to Sign In

Hello,
I created a new @me.com address today for a seperate Apple ID account. I am needing to sign into the iTunes Store, but I keep getting a response that says:
"We could not complete your iTunes Store request. An unknown error occurred (5002)."
Any ideas as to what's going on here?
I also took a screen cap of the issue:
Thank you for the help!
Marcus

Thank you for your response Carolyn; however, that article does not fix my problem. I am getting this error when trying to sign into the iTunes Store on my Mac.
I get the same problem when signing into the Store on the iPad or iPhone. I simply can't log in, but when I go to iCloud.com or the Apple ID login on Apple.com, it works.
Marcus

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

Getting an error when i am execution a BI query using ABAP.

Hi Expert,
I am getting an error when i am execution a BI query using ABAP. Its Giving me this Error "The Info Provider properties for GHRGPDM12 are not the same as the system default" and in the error analysis it saying as bellow.
Property Data Integrity has been set differently to the system default.
Current setting: 0 for GHRGPDM12
System default: u2019 7 u2018
As I am very new to BI and have very limited knowledge, so I am not able to understand this problem. Can any one help me to resolving this issue. Previously it as working fine, I am getting this error last 2 days.
when i am debugging , I am getting error from
create instance of cl_rsr_request
CREATE OBJECT r_request
EXPORTING
i_genuniid = p_genuniid.
this FM. Its not able to create the object. Can any one please help me out.
Thanks in advance.
Regards
Satrajit

Hi,
I am able to solve this problem
Regards
Satrajit

Getting BSOD error while booting

Hi,
I am getting BSOD error while booting using bootable pendrive.
Could you guys please provide the possible solution
Regards,
Chandan

Hello,
To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)"....

I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update

I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and some people said that they worked.
Here is the original Link:
https://discussions.apple.com/thread/2151777?start=0&tstart=0
OK, this worked for me:( Original Post by r0tt3n4pp13)
1. Save iTunes install file to your desktop.
2. Disconnect from internet.
3. Disable Firewall/Security software.
4. Run install. Note that it installs Application Support and a bunch of other software this time.
5. Run iTunes.
6. Enable Firewall/Security software.
7. Reconnect to internet.
8. Download Watchmen Director's Cut post haste.
OR!
(Original post by Cr4z33)
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally.

Getting an error when booting SATA on K7N2 Delta2

Similar Messages

Maybe you are looking for