Getting an error when inserting a big table inside a ""-
hi iam getting an error String not properly closed when i add big table inside a "".plz give me an idea how to insert a table inside a String.iam using jsp .
thanks in advance
1) Please use proper English grammar, spelling, punctuation, and capitalization.
2) I don't know what you mean "convert this forum page to a Word doc." Are you talking about taking HTML that's served up from some arbitrary URL and saving it in a Word doc? If so, you would not have the page's content hardcoded in your JSP. If you need to hardcode the page's content in your JSP, then I'm still not understanding what you're doing.
3) If you want to write it out in .doc format, then you need to use a library that can write that format, such as POI from jakarta: http://jakarta.apache.org/poi/
4) Don't tell me not to say I don't understand. If I don't understand what you're saying, I'm going to say so. It would be stupid for me to pretend I understand when I don't.
I don't think I can help you. Good luck.
Similar Messages
-
" Error when inserting in PSA table RSTSODSPART" when loading into PSA
Hello,
Did anyone encounter something similar, and found a solution ?
BI 7.0 - EnhP 1 - SP5
When loading data from R/3 into PSA, we encounter following error message:
" Error when inserting in PSA table RSTSODSPART"
===============================================================
- the first datapackage is written successfully to PSA,
but from the second datapackage onwards the error message pops-up
" Error when inserting in PSA table RSTSODSPART"
- The original dataselection in the infopackage is somewhere stored
If the selection in the InfoPackage is reduced (e.g. only one document i.o. a period)
it stil starts loading according the original selection (the month)
- If we create a new InfoPackage and select very few data (only one datapackage)
then we can load to PSA succesfully, but when we load to DSO we can't activate the DSO.
- We remarked that:
Two versions of the PSA exist for that datasource 0FI_GL_40:
a Table(/BIC/B0000555000) in version 1 exists,
a Table(/BIC/B0000555001) in version 2 exists
Thanks in advance,
Best regardsHello All,
We had a problem similar to what Ilse Depoortere describes. The problem happens in our BW QA system a few days/weeks after it has been copied from Production. Data loads start failing with these two error messages:
RSM2 851 - Error when writing in PSA (Caller 32)
RSAR 130 - Error 7 when adding to PSA (Caller 70)
We have just implemented the fix described in note 1340371 (replaced the LIB_DBSL with patch level 247), and the problem is gone. Failed data load process chains can be restarted and finish successfully.
This has been a really useful discussion, thanks all! And thanks to my coworker Bob who found it.
Vince Vajda -
Error when inserting in a table with an identity column
Hi,
I am new to Oracle SOA suite and ESB.
I have been through the Oracle training and have worked for about 2 months with the tooling.
We have a Database adabter that inserts data in 5 Tables with relations to each other.
Each table has his own not NULL Identity column.
When running/ testing the ESB service we get the error at the end of this post.
From this we learned that the Database adapter inserts the value NULL in the identity column.
We cannot find in the documentation how to get the database adabter to skip this first column and ignore it.
Is this possible within the wizard? Our impression is no
Is this possible somwhere else/
And if so How can we do this?
If anyone can help it would be greatly appreciated
Pepijn
Generic error.
oracle.tip.esb.server.common.exceptions.BusinessEventRejectionException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/GVB_PDI_PDI_Wegschrijven_Medewerkergegevens/testurv.wsdl [ testurv_ptt::insert(VastAdresCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception.
insert failed. Descriptor name: [testurv.VastAdres]. [Caused by: Cannot insert explicit value for identity column in table 'VastAdres' when IDENTITY_INSERT is set to OFF.]
; nested exception is:
ORABPEL-11616
DBWriteInteractionSpec Execute Failed Exception.
insert failed. Descriptor name: [testurv.VastAdres]. [Caused by: Cannot insert explicit value for identity column in table 'VastAdres' when IDENTITY_INSERT is set to OFF.]
Caused by Uitzondering [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.3.0) (Build 070608)): oracle.toplink.exceptions.DatabaseException
Interne uitzondering: com.microsoft.sqlserver.jdbc.SQLServerException: Cannot insert explicit value for identity column in table 'VastAdres' when IDENTITY_INSERT is set to OFF.Foutcode: 544
Call:INSERT INTO dbo.VastAdres (ID, BeginDatum, Einddatum, Land, Plaats, Postcode, VolAdres) VALUES (?, ?, ?, ?, ?, ?, ?)
bind => [null, 1894-06-24 00:00:00.0, 1872-09-04 00:00:00.0, Nederland, Wijdewormer, 1456 NR, Oosterdwarsweg 8]
Query:InsertObjectQuery(<VastAdres null />).Hi,
Click on the resources tab in the ESB system/ Project to see the ESB system design and all the components in it.
Click on the Database adapter that you want to edit..and make the necesary changes..
Check this link.
http://download-uk.oracle.com/docs/cd/B31017_01/core.1013/b28764/esb008.htm for "6.8.2 How to Modify Adapter Services" section.
If you are calling a database procedure which inturn makes the insert, you will have to make changes in the database and you job would be much simpler. It seems there are limitations on what you can change in the Database adapter once it is created. Please check the link for further details.
Thanks,
Rajesh -
Getting error when inserting Web API/Table Inteface class in Web Template !
Hi Experts,
I am getting error -- Invalid Renderer class: '&1' ZTEST_BWREPORT_ADI
while inserting the <param name="ITEM_CLASS" value="ZTEST_BWREPORT_ADI"/> in HTML code of the template, having one table web item, before <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/> statement to get the customization I have done in ZTEST_BWREPORT_ADI as per table interface.
Please look into the issue and try to suggest the possible solutions as soon as possible.
Regards,
Aditya Srivastava.Hi,
The got the solution which is nothing tricky. I have to just insert <param name = "MODIFY_CLASS" value = "ZTEST_BWREPORTS_ADI"/> after <param name = "ITEM_CLASS" value = "CL_RSR_WWW_ITEM_GRID"> to get the desired result. Though I don't know what might be the reason (since I am very new to BW) but atleast the thing is working.
Regards,
Aditya Srivastava. -
Error when inserting into a table
Hi,
I am running this insert stmt
SQL> insert into cntct select * from CUSTSRV_ADMN.cntct_bk1;
ERROR at line 1:
ORA-01733: virtual column not allowed here
Below is the table structure.
SQL> desc cntct;
Name Null? Type
CNTCT_KEY NOT NULL NUMBER(10)
CNTCT_NUM NOT NULL CHAR(12)
SRC_SYS_DESC NOT NULL VARCHAR2(5)
ACTVTY_DT NOT NULL DATE
CNTCT_TYPE_DESC NOT NULL VARCHAR2(15)
CNTCT_INIATR_CD NOT NULL CHAR(1)
CNTCT_INIATR_DESC NOT NULL VARCHAR2(10)
CNTCT_INIATR_NAME NOT NULL VARCHAR2(30)
CNTCT_INIATR_PHONE_NUM VARCHAR2
CNTCT_STUS_CD NOT NULL CHAR(1)
CNTCT_STUS_DESC NOT NULL VARCHAR2(10)
CNTCT_AGE_DAYS_CNT NOT NULL NUMBER(4)
CNTCT_ELPSD_TIME_SEC_CNT NOT NULL NUMBER(10)
CNTCT_RCVD_DT NOT NULL DATE
CNTCT_OPEN_DT NOT NULL DATE
CNTCT_RSLTN_DT NOT NULL DATE
CNTCT_NEW_IND NOT NULL CHAR(1)
HIGHST_NMIS_CD NOT NULL NUMBER(1)
INIATNG_AGENT_KEY NOT NULL NUMBER(5)
CLSNG_AGENT_KEY NOT NULL NUMBER(5)
CNTCT_ID NOT NULL VARCHAR2(20)
IMG_NUM NOT NULL VARCHAR2(13)
PRVDR_NPI NOT NULL VARCHAR2(10)
PRVDR_TIN NOT NULL VARCHAR2(9)
CNTCT_OPEN_DTIME NOT NULL DATE
CNTCT_RSLTN_DTIME NOT NULL DATE
Please advise.
Regards,
NarayanNo its another table.
I also tried using columns instead of '*'
SQL> insert into cntct
2 select CNTCT_KEY,
3 CNTCT_NUM,
4 SRC_SYS_DESC,
5 ACTVTY_DT,
6 CNTCT_TYPE_DESC,
7 CNTCT_INIATR_CD,
8 CNTCT_INIATR_DESC,
9 CNTCT_INIATR_NAME,
10 CNTCT_INIATR_PHONE_NUM,
11 CNTCT_STUS_CD,
12 CNTCT_STUS_DESC,
13 CNTCT_AGE_DAYS_CNT,
14 CNTCT_ELPSD_TIME_SEC_CNT,
15 CNTCT_RCVD_DT,
16 CNTCT_OPEN_DT,
17 CNTCT_RSLTN_DT,
18 CNTCT_NEW_IND,
19 HIGHST_NMIS_CD,
20 INIATNG_AGENT_KEY,
21 CLSNG_AGENT_KEY,
22 CNTCT_ID,
23 IMG_NUM,
24 PRVDR_NPI,
25 PRVDR_TIN,
26 CNTCT_OPEN_DTIME,
27 CNTCT_RSLTN_DTIME
28 from CUSTSRV_ADMN.cntct_bk1;
Still have the same error.
insert into cntct
ERROR at line 1:
ORA-01733: virtual column not allowed here
Please advise.
Regards,
Narayan -
Error when inserting Web Dynpro script
Hello,
I am trying to create a new form using fields from KNA1 and am using ISR controls. When I try to insert Webdynpro scripts i get message "Error when inserting Web Dynpro script" Message no. FPUIFB094.
Has anyone faced this error? no notes are available regarding this and in SDN.
Regards
PrasadIt must be atleast ALD 7.1. Check this [Thread|Re: Problem on Button; having the same issue. Also check the SAPNOTE 962763.
-
Error when inserting or changing in a sorted table
Hi Experts,
When i am executing a webdynpro application it says Error when inserting or changing in a sorted table. Can any one help for this.
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_COMPONENTCONTROLLER~GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: WDDOMODIFYVIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
in ST22
Object Definition
DATA: lo_node TYPE REF TO if_wd_context_node,
lo_node_info TYPE REF TO if_wd_context_node_info,
lo_element TYPE REF TO if_wd_context_element.
Additional Data declarations
DATA: lv_key TYPE string.
Get context node.
lo_node = wd_context->get_child_node( name = 'DROPDOWNLISTS' ).
lo_node_info = lo_node->get_node_info( ).
Call method to fetch the categories.
CALL METHOD cl_hap_wd_start_page_ui=>category_get_list
EXPORTING
add_on_application = add_on_application
IMPORTING
t_categories = lt_categories.
Append Default selection entry 'All'.
lw_category-category_id = '00000000'.
lw_category-category_name = 'All'.
APPEND lw_category TO lt_categories.
Sort table after appending the new entry.
SORT lt_categories ASCENDING.
Loop through the category list and populate key(category_id) value(category_name) pair for
LOOP AT lt_categories INTO lw_category.
lw_key_value-key = lw_category-category_id.
625 lw_key_value-value = lw_category-category_name.
>>>>> APPEND lw_key_value TO lt_key_values.------>Here it throws an error
627 CLEAR: lw_key_value, lw_category.
628 ENDLOOP.
629
630 * Bind the category key-value pair to the context attribute.
631 CALL METHOD lo_node_info->set_attribute_value_set
632 EXPORTING
633 name = 'CATEGORY_LIST'
634 value_set = lt_key_values.
635
636 * Make the entry 'All' as default selected.
637 CALL METHOD lo_node->set_attribute
638 EXPORTING
639 value = '00000000'
640 name = 'CATEGORY_LIST'.
641
642 ENDMETHOD.
643
644 method GET_EMPLOYEES.
645Hello Durga,
from the error what I understood is lt_key_values is a sorted table and you are trying append a new line to it. Incase of sorted table you need to use the INSERT statement and not the APPEND statement.
INSERT lw_key_value INTO table lt_key_values.
BR, Saravanan -
I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message: Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.
Julian,
Pages simply won't support a table with that many rows. If you need that many, you must use another application.
Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
There are probably other ways, but that's what comes to mind here.
Jerry -
Getting Compilation error when used SET or MULTISET operator on nested tabl
Dear All,
I am getting Compilation error when used SET or MULTISET operator on nested tables inside a procedure.
This is working fine in other DB installations of 10g but does not work in another 10g DB.
it says "wrong number of parameter or datatype used in SET"
Can any one suggest what went wrong here?
Thanks in advance.Can any one suggest what went wrong here?Only if you would post the query and Oracle versions on both databases.
Besides, this forum deals with issues in Oracle product installation. So post this query in SQL PL/SQL forum for better response. -
ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error
Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive? -
Error when executing statement for table/stored proc
Hi All,
I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
In my stored procedure I have three insert statements to insert rows in to 3 tables.
This stored procedure is working fine for two insert statements i.e,
For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
<i><b>Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error</b></i>
<i><b>Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error</b></i>
Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
<i><b> Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.</b></i>
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
MurthyHi narasimha,
This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati -
File to JDBC :Error when executing statement for table/stored proc.
Hi,
I am getting following error when i am trying to insert data into z-table using JDBC recr adapter.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZTEST' (structure 'STATEMENT'): java.sql.SQLException: <u>[Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name '<b>ZTEST</b>'.</u>
But the database table name 'ZTEST' exists in the system.
XML structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
<STATEMENT>
<TEST action="INSERT">
<table>ZTEST</table>
<access>
<ROLLNO>123</ROLLNO>
<FIRSTNAME>ABC</FIRSTNAME>
<LASTNAME>XYZ</LASTNAME>
</access>
</TEST>
</STATEMENT>
</ns0:MT_RECR>
Regards,
SrinivasHi,
I have changed my MT str but still getting the same error.Is it possible to insert/ update a z-table using JDBC adapter.
XML str:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
<STATEMENT>
<ZTEST action="INSERT">
<access>
<ROLLNO>123</ROLLNO>
<FIRSTNAME>abc</FIRSTNAME>
<LASTNAME>XYZ</LASTNAME>
</access>
</ZTEST>
</STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas -
SQL*Loader-929: Error parsing insert statement for table
Hi,
I get the following error with SQL*Loader:
Table MYTABLE loaded from every logical record.
Insert option in effect for this table: INSERT
Column Name Position Len Term Encl Datatype
IDE FIRST * ; CHARACTER
SQL string for column : "mysequence.NEXTVAL"
CSI_NBR 1:10 10 ; CHARACTER
POLICY_NBR 11:22 12 ; CHARACTER
CURRENCY_COD 23:25 3 ; CHARACTER
POLICY_STAT 26:27 2 ; CHARACTER
PRODUCT_COD 28:35 8 ; CHARACTER
END_DAT 44:53 10 ; CHARACTER
FISCAL_COD 83:83 1 ; CHARACTER
TOT_VAL 92:112 21 ; CHARACTER
SQL*Loader-929: Error parsing insert statement for table MYTABLE.
ORA-01031: insufficient privileges
I am positive that I can SELECT the sequence and INSERT into the table with the user invoking sql*loader.
Where does that "ORA-01031" come from?
Regards
...Options:
1) you are wrong about privileges OR
2) you have the privilege only when you connect via SQL*Plus (or whichever other tool you used to test the insert).
Is it possible that during your test you enabled the role which granted you the INSERT privilege - and that SQL*Loader doesn't do this?
Can you see the table in this list?
select *
from user_tab_privs_recd
where table_name='MY_TABLE'
and owner='table owner whoever';
select *
from user_role_privs;Any roles where DEFAULT_ROLE is not YES?
HTH
Regards Nigel -
Error when trying to truncate table from within PL/SQL
Hello.....
Does anyone know why I get an error when trying to execute the following command from within PL/SQL?
truncate table event;
The error is as follows:
ORA-06550: line 20, column 14:
PLS-00103: Encountered the symbol "TABLE" when expecting one of the following:
:= . ( @ % ;
The symbol ":= was inserted before "TABLE" to continue.And as a DDL, it does a COMMIT just before it runs. Whether you want a COMMIT or not.
And with all the locking and serialization issues associated with a DDL. -
Error when inserting Web Dynpro script in Adobe form
Hi
In my WD component in one of the view I have an ADOBE form (Online scenario) and a button to save data into backend. In the ADOBE form everything is working properly, however the problem is when I click on the button to save, Its not getting into my action code. Even I am not getting any error other than the wait symbol.
In the form I have taken ZCI layout but when i'm inserting Webdynpro Script its showing an error 'Error when inserting Web Dynpro script'.
Please let me know why this error is getting.
Thanks
RamHi Ram,
I hope you help me,
I have the same error, when I insert a web Dynrp Script, what version of SAPGUI do you use?
Thanks
Maybe you are looking for
-
Events in month view that span multiple days
Hi, When I enter an event in iCal with a start time at lets say day 1 and an end time at day 3 it shows up as a multiday event in week view, but when I switch to month view it only shows the event and start time at day 1 and not the event at day 2 or
-
CO Extractor + FI Document Number
Hi All, I have activated in CO 0CO_OM_CCA_9 extractor, the user told me that he neds the FI Document Number, i have checked the extractor and i did not find it, i just found "Reference Document Number" but this field not always bring the FI Document
-
X3-1 problem..pls help me :(
how can i reset my nokia x3 in off mode???? i cannot start using my x3 because of the security code.. i enter my right code,, but still " security code error"" i also already try to enter 12345 code,,,but it still same.. some1 pls help me...ASAP!! TQ
-
I am having problems playing DVD movies. The playback audio is slow and distorted. The video seems fine but may be a tad bit erratic also. I am using and an A105 S2021 running XP with the DVD device that came in the machine (HL-DT-ST DVDRAM GMA-4082N
-
Rebuild Database did not reduce the database size
I just completed a rebuild database. The rebuild completed much quicker than anticipated and in the end the did not reduce in size. This is my first rebuild and since original installation I have deleted a number of masters. From my understanding thu