Getting an error when running reports in the ReportSrvr log

Hi All,
Reports not opening just seem to be running - getting error"ReportServer:Could not find instance for design number."
Plz help- Thanks in Advance

I found the resolution today. It appears that the service that runs was not started up correctly. As soon as we stopped and started the service, reports was running properly again.

Similar Messages

Getting BEFOREREPORTTRIGGER error when running report on web

Hi,
I have developed a report which uses lexicals in main query. In lexicals I apply filters (if any) which come as parameters from the GUI via a dbase table. When report is run locally using "Run Paper Layout" option it works as desired -- with or without filters.
When report is run via GUI it runs fine when no filters are applied. Problem comes when any of the filter is applied in any one of the cases selected from the GUI.
And I get the following errors.
REP-1419: Please contact the Systems Administrator.
REP-1419: 'beforereport': PL/SQL program aborted.
when I go and check the beforereport trigger it does not show any errors when report is run within report builder.
Any suggestions would be appreciated
Thanks in advance

Problem comes when any of the filter is applied in any one of the cases selected from the GUI.Do you mean that the problems only shows when you run the report in your browser via 9iAS?
Which version are you using?
Can you post the before report trigger?

Error when running reports on the WEB

Hi,
I have been successful in deploying our application on the Web,
using WebDB listener, Developer Server, Report Server and JInitiator 1.1.7.18.
Now the forms on the web runs fine without any problem but
when I run Reports from Forms using RUN_PRODUCT built-in by passing parameters from Forms to Reports it generates this following error: REP-0081-Error During I/O operation and REP-0110: Unable to open file "<<file>>.html" scaba 14.
The strange thing about the REP-0110 is, it refer to a path that is not defined in my registry(FORMS60_OUTPUT,_MAPPING, REPORTS60_PATH,_TMP,_WEBLOC,_WEBLOC_TRANSLATED) and neither my physical directory in the directory mappings which I defined on the web server. (I refer to a the path mindpack4.1 and the REP-0110 refer to mindpack4_1)
Any help appreciated.
Thanks

Hello pals,
i have set the following parameters: TMPDIR and REPORTS60_TMP...
and it seems to be working!!!
i hope that the problem is not somewhere else.
NB. I was having problems with 2 reports only. the others were
working fine.
any comments will be most welcomed.
regards
Yogeeraj

Intermitten Errors when running reports in Crystal Report Viewer

Hi All,
We get intermittent errors when running the same crystal report over and over again. Most of the time, it would run perfectly fine. Once in a while we would see the error message below displayed...
Failed to open the connection. Failed to open the connection. C:\DOCUME1\USBOAD1\LOCALS~1\Temp\{432E6564-2811-4364-84FB-5E315F8DCBCA}.rpt
CrystalReportViewer - CrystalReportViewer1
Error: Object reference not set to an instance of an object.
We don't know how to reproduce this error. We tried looking into the BusinessObjects log files and the error is trapped inside C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Logging\crystalras_2009420_3626_2716_ras.log with the message below:
ErrorLog 2009 4 21 11:28:28.598 2716 10272 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:756 ErrorMsg:"Failed to open the connection.
Failed to open the connection.
C:\DOCUME1\USBOAD1.000\LOCALS~1\Temp\{432E6564-2811-4364-84FB-5E315F8DCBCA}.rpt" DetailedErrorMsg:"
Question:
Does anyone know why this is happening? Any help will be much appreciated. It happens maybe 1 out of 10 times the report runs.
Versions:
CR XI R2 SP1
.Net Framework 2.0
Windows 2000 SP4

Hi,
Give it a try by using the close and dispose method for report object and also use the GC.collect.
Hope it helps!!
Amit

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

HT1222 I am getting an error when I am installing the new update for my iPhone. Is anyone else getting an error in the middle of installing?

I am getting an error when trying to install the current updates.

Why don't you try telling us what the error is...
Check this document for troubleshooting information: http://support.apple.com/kb/ts3694

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

Do the update using iTunes on your computer.
Plug your iPhone into iTunes (current version), let it sync, then click "Check for Updates" on the iPhone's summary page in iTunes.

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

The application Install.app can't be opened. -1712

TS3989 I keep getting this error when I click on the link inviting me to join a Photo Stream: "An error occurred while joining the Photo Stream. Please try again later. "

I keep getting this error when I click on the link inviting me to join a Photo Stream: "An error occurred while joining the Photo Stream. Please try again later."
I was the one who set up the Photo Stream and sent the link to myself. I called Apple and they said I did everything right and the server must be temporarily down, but it has been the same for the better part of a day.

None of the fixes above worked for me. Continued getting the "try again" error message.
Tryed a bunch of things, such as going directly to icloud on Safari to open the mail message, no luck.
Tryed the following;
Went to iCloud and logged in via Safari, clicked on my account name in top right corner, selected "Advanced" on drop down menu, and selected "Reset Photo Stream".
Turned off Photo Stream on all devices and iPhoto.
Turned on Shared Photo Stream option on Mac iCloud preferences.
Tried the "Join This Photo Stream" button in my Mac Mail app .me account again.
Still got the error message.
Forwarded the original mail message to a yahoo account, selected "Join this Photo Stream" in the yahoo account mail (still in my Mac Mail app), and lo and behold, iPhoto opened and displayed the photos.
Could be this would have worked right from the start.
Oh yea, still get the "try again" message if I click on the Photo Stream button in my .me account.

Get a Report crashed error while running report using the mode character

Hello,
I'am getting an "Enable to run report - Report as crashde" issue only when I'am running reports using the mode character. The same report with desformat pdf never has any problems. I have changed the englife (set to one) increase the cachesize but I still have the same issue.
I'm using report 6i and Oracle 8i.
Thanks in advance for your help.
Regards,
Laurent.

Hi Thanks for the response,
In fact the report in character mode is working fine in my environnement but is not working on my customer environnement (which is supposed to be the same as mine). I was thinking of cache size issue or something like this ?
Regards,
Laurent.

Error when running report using SDK

Hi, I am getting following error when I am running a report in boxi r2 sp3 on IIS. Infoview and CMC runs fine but SDK application is not able to connect to CMS. This error does not come all the time. It happens intermittently.
Error in RetrieveReport: Unable to connect to cluster @hisuatcluster to retrieve updated CMS member list. Logon cannot continue.
Anyone has seen this and any way to pin point the cause. We have used -ns and -port switch in the command line of CMS and all servers.
Thanks,

will try that. But we would not be leveraging cluster benefit then. What happens if that particilar CMS in cluster goes down.
Below is the logic of SDK.
1.     Create an EnterpriseSession by calling SessionMgr.Login(the credentials we use to connect on in the web.config file).
2.     Get a reference to the InfoStore with EnterpriseSession.GetService(u201CInfoStoreu201D)
3.     Get a reference to the report as an InfoObject by querying the InfoStore u2013 InfoStore.Query(u201CSELECT * FROM CI_INFOOBJECTS WHERE u2026u201D)
4.     Get a reference to the RASReportFactory u2013 EnterpriseSession.GetService(u201Cu201D, u201CRASReportFactoryu201D)
5.     Open the report using the InfoObject (line 3) and RASReportFactory (line 4) u2013 ReportClientDoc = ReportAppFactory.OpenDocument(InfoObject.ID, 0)
6.     Manipulate the reportu2019s connection information.
7.     Set the vieweru2019s report source with the report (this is commented out in the current tests) u2013 CrystalReportViewer.ReportSource = ReportClientDocument
8.     Close the session u2013 EnterpriseSession.Logoff()

Error when running reports

hi
I get this error when I am trying to run a report what does this mean
REP-1212: Object 'Body' is not fully enclosed by its
enclosing object ''.
and too whe can I find explanation using the error id like (REP-1212).
Thanks in advance
Ramkumar

hello,
basically that means, that one of your objects is exceeding the outer boundries of the report body. the easiest way is to go to the margin view. the thick black rectangle represents the body. see if there is any object (except the ones in the margin area) sitting or pointing outside the body frame.
explainations for the error-code are in the online help, shipped with oracle reports.
regards,
the oracle reports team

Getting an error when running OPENROWSET on remote SSMS

Hi!
I'm getting an error when I execute OPENROWSET command
from a remote SQL Server Management studio. But has no problem when directly execute the command on our database server.
Msg 7303, Level 16, State 1, Line 2
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".
Is there anything I need to enable or configure?
Thank you in advance for your help!

OK, this is the information that we need.
"It is already opened exclusively by another user, or you need permission to view its data."
Please check those 2 options:
* "already opened": at time the connection is ot working try to open the file localy with the excal application. If the file is in used then the excel will promp about this. If it is not give you any error localy then
try again from remoe (since the excel might take control if the connection is opened but not in used by remote connection). If you get that this might be the problem pls repeat this several time to make sure.
* "you need permission": This is much more common situation
>> By default, when you use OpenRowSet to remote server it's the SQL Server Service user that needs access to the file. This is why lot of time it work ocaly and not from remote. check the service's user's permission.
You can change the SQL server to run as a AD user (with the security implications it has) and then give that user access to the file on the network
>> You are trying to use a share network folder. check thi link:
http://technet.microsoft.com/en-us/library/ms175915.aspx
"To use BULK INSERT or INSERT...SELECT * FROM OPENROWSET(BULK...) to bulk import data from another computer, the data file must be shared between the two computers. To specify a shared data file, use its universal naming convention (UNC) name, which takes
the general form"
>> check this link as well:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ac615f7e-a4af-44d9-8bba-8e5c20be3c76/using-credentials-with-openrowset?forum=sqlintegrationservices
>> make sure that you use the right provider. Are you using 64 bit or 32?
[Personal Site] [Blog] [Facebook]

Why am I getting Run-time menu error (Error 88 occurred at One or more illegal menu item index in...) in my built application (single .exe) , but don't get any error when running/debugging it?

I am using LabVIEW 6.02 & also downloaded the application builder patch. For my runtime menus, I've a subVI that first calls "Delete Menu Items.vi" to get rid of the standard menu items and then "Insert Menu Items.vi" to add my own. I only get an error when I try to run the built application.

There was a similar issue in LabVIEW 5.0 where you would get the error if you passed an empty array to the 'items' input of Delete Menu Items. This was corrected in version 5.0.1. Did you mass compile your VI's after upgrading to version 6.0.2?
I tried to reproduce the problem in a small VI but was not successful. I can run an executable built from this example without any problems. I am attaching it for you to test.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect
Attachments:
menu.llb ‏33 KB

Getting an error when running reports in the ReportSrvr log

Similar Messages

Maybe you are looking for